2020-05-09 08:42:03

by chao hao

Subject: [PATCH v3 2/7] iommu/mediatek: Rename the register STANDARD_AXI_MODE(0x48) to MISC_CTRL

For iommu offset=0x48 register, only the previous mt8173/mt8183 use the
name STANDARD_AXI_MODE, all the latest SoC extend the register more
feature by different bits, for example: axi_mode, in_order_en, coherent_en
and so on. So rename REG_MMU_MISC_CTRL may be more proper.

This patch only rename the register name, no functional change.

Signed-off-by: Chao Hao <[email protected]>
---
drivers/iommu/mtk_iommu.c | 14 +++++++-------
drivers/iommu/mtk_iommu.h | 2 +-
2 files changed, 8 insertions(+), 8 deletions(-)

diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
index 5f4d6df59cf6..e7e7c7695ed1 100644
--- a/drivers/iommu/mtk_iommu.c
+++ b/drivers/iommu/mtk_iommu.c
@@ -41,7 +41,7 @@
#define F_INVLD_EN0 BIT(0)
#define F_INVLD_EN1 BIT(1)

-#define REG_MMU_STANDARD_AXI_MODE 0x048
+#define REG_MMU_MISC_CTRL 0x048
#define REG_MMU_DCM_DIS 0x050

#define REG_MMU_CTRL_REG 0x110
@@ -585,8 +585,10 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
}
writel_relaxed(0, data->base + REG_MMU_DCM_DIS);

- if (data->plat_data->reset_axi)
- writel_relaxed(0, data->base + REG_MMU_STANDARD_AXI_MODE);
+ if (data->plat_data->reset_axi) {
+ /* The register is called STANDARD_AXI_MODE in this case */
+ writel_relaxed(0, data->base + REG_MMU_MISC_CTRL);
+ }

if (devm_request_irq(data->dev, data->irq, mtk_iommu_isr, 0,
dev_name(data->dev), (void *)data)) {
@@ -730,8 +732,7 @@ static int __maybe_unused mtk_iommu_suspend(struct device *dev)
struct mtk_iommu_suspend_reg *reg = &data->reg;
void __iomem *base = data->base;

- reg->standard_axi_mode = readl_relaxed(base +
- REG_MMU_STANDARD_AXI_MODE);
+ reg->misc_ctrl = readl_relaxed(base + REG_MMU_MISC_CTRL);
reg->dcm_dis = readl_relaxed(base + REG_MMU_DCM_DIS);
reg->ctrl_reg = readl_relaxed(base + REG_MMU_CTRL_REG);
reg->int_control0 = readl_relaxed(base + REG_MMU_INT_CONTROL0);
@@ -755,8 +756,7 @@ static int __maybe_unused mtk_iommu_resume(struct device *dev)
dev_err(data->dev, "Failed to enable clk(%d) in resume\n", ret);
return ret;
}
- writel_relaxed(reg->standard_axi_mode,
- base + REG_MMU_STANDARD_AXI_MODE);
+ writel_relaxed(reg->misc_ctrl, base + REG_MMU_MISC_CTRL);
writel_relaxed(reg->dcm_dis, base + REG_MMU_DCM_DIS);
writel_relaxed(reg->ctrl_reg, base + REG_MMU_CTRL_REG);
writel_relaxed(reg->int_control0, base + REG_MMU_INT_CONTROL0);
diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
index ea949a324e33..1b6ea839b92c 100644
--- a/drivers/iommu/mtk_iommu.h
+++ b/drivers/iommu/mtk_iommu.h
@@ -18,7 +18,7 @@
#include <soc/mediatek/smi.h>

struct mtk_iommu_suspend_reg {
- u32 standard_axi_mode;
+ u32 misc_ctrl;
u32 dcm_dis;
u32 ctrl_reg;
u32 int_control0;
--
2.18.0

2020-05-25 06:18:00

by Yong Wu (吴勇)

Subject: Re: [PATCH v3 2/7] iommu/mediatek: Rename the register STANDARD_AXI_MODE(0x48) to MISC_CTRL

On Sat, 2020-05-09 at 16:36 +0800, Chao Hao wrote:
> For iommu offset=0x48 register, only the previous mt8173/mt8183 use the
> name STANDARD_AXI_MODE, all the latest SoC extend the register more
> feature by different bits, for example: axi_mode, in_order_en, coherent_en
> and so on. So rename REG_MMU_MISC_CTRL may be more proper.
>
> This patch only rename the register name, no functional change.
>
> Signed-off-by: Chao Hao <[email protected]>

Reviewed-by: Yong Wu <[email protected]>

> ---
> drivers/iommu/mtk_iommu.c | 14 +++++++-------
> drivers/iommu/mtk_iommu.h | 2 +-
> 2 files changed, 8 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/iommu/mtk_iommu.c b/drivers/iommu/mtk_iommu.c
> index 5f4d6df59cf6..e7e7c7695ed1 100644
> --- a/drivers/iommu/mtk_iommu.c
> +++ b/drivers/iommu/mtk_iommu.c
> @@ -41,7 +41,7 @@
> #define F_INVLD_EN0 BIT(0)
> #define F_INVLD_EN1 BIT(1)
>
> -#define REG_MMU_STANDARD_AXI_MODE 0x048
> +#define REG_MMU_MISC_CTRL 0x048
> #define REG_MMU_DCM_DIS 0x050
>
> #define REG_MMU_CTRL_REG 0x110
> @@ -585,8 +585,10 @@ static int mtk_iommu_hw_init(const struct mtk_iommu_data *data)
> }
> writel_relaxed(0, data->base + REG_MMU_DCM_DIS);
>
> - if (data->plat_data->reset_axi)
> - writel_relaxed(0, data->base + REG_MMU_STANDARD_AXI_MODE);
> + if (data->plat_data->reset_axi) {
> + /* The register is called STANDARD_AXI_MODE in this case */
> + writel_relaxed(0, data->base + REG_MMU_MISC_CTRL);
> + }
>
> if (devm_request_irq(data->dev, data->irq, mtk_iommu_isr, 0,
> dev_name(data->dev), (void *)data)) {
> @@ -730,8 +732,7 @@ static int __maybe_unused mtk_iommu_suspend(struct device *dev)
> struct mtk_iommu_suspend_reg *reg = &data->reg;
> void __iomem *base = data->base;
>
> - reg->standard_axi_mode = readl_relaxed(base +
> - REG_MMU_STANDARD_AXI_MODE);
> + reg->misc_ctrl = readl_relaxed(base + REG_MMU_MISC_CTRL);
> reg->dcm_dis = readl_relaxed(base + REG_MMU_DCM_DIS);
> reg->ctrl_reg = readl_relaxed(base + REG_MMU_CTRL_REG);
> reg->int_control0 = readl_relaxed(base + REG_MMU_INT_CONTROL0);
> @@ -755,8 +756,7 @@ static int __maybe_unused mtk_iommu_resume(struct device *dev)
> dev_err(data->dev, "Failed to enable clk(%d) in resume\n", ret);
> return ret;
> }
> - writel_relaxed(reg->standard_axi_mode,
> - base + REG_MMU_STANDARD_AXI_MODE);
> + writel_relaxed(reg->misc_ctrl, base + REG_MMU_MISC_CTRL);
> writel_relaxed(reg->dcm_dis, base + REG_MMU_DCM_DIS);
> writel_relaxed(reg->ctrl_reg, base + REG_MMU_CTRL_REG);
> writel_relaxed(reg->int_control0, base + REG_MMU_INT_CONTROL0);
> diff --git a/drivers/iommu/mtk_iommu.h b/drivers/iommu/mtk_iommu.h
> index ea949a324e33..1b6ea839b92c 100644
> --- a/drivers/iommu/mtk_iommu.h
> +++ b/drivers/iommu/mtk_iommu.h
> @@ -18,7 +18,7 @@
> #include <soc/mediatek/smi.h>
>
> struct mtk_iommu_suspend_reg {
> - u32 standard_axi_mode;
> + u32 misc_ctrl;
> u32 dcm_dis;
> u32 ctrl_reg;
> u32 int_control0;