i801_add_mux() fills in the GPIO lookup table by manually populating an
array of gpiod_lookup structures. Use the existing GPIO_LOOKUP_IDX()
helper macro instead, to relax a dependency on the gpiod_lookup
structure's member names.
Signed-off-by: Geert Uytterhoeven <[email protected]>
Acked-by: Lee Jones <[email protected]>
---
v7:
- Add Acked-by,
v6:
- New.
---
drivers/mfd/sm501.c | 24 ++++++++----------------
1 file changed, 8 insertions(+), 16 deletions(-)
diff --git a/drivers/mfd/sm501.c b/drivers/mfd/sm501.c
index e49787e6bb93e5c8..ccd62b963952814e 100644
--- a/drivers/mfd/sm501.c
+++ b/drivers/mfd/sm501.c
@@ -1145,22 +1145,14 @@ static int sm501_register_gpio_i2c_instance(struct sm501_devdata *sm,
return -ENOMEM;
lookup->dev_id = "i2c-gpio";
- if (iic->pin_sda < 32)
- lookup->table[0].chip_label = "SM501-LOW";
- else
- lookup->table[0].chip_label = "SM501-HIGH";
- lookup->table[0].chip_hwnum = iic->pin_sda % 32;
- lookup->table[0].con_id = NULL;
- lookup->table[0].idx = 0;
- lookup->table[0].flags = GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN;
- if (iic->pin_scl < 32)
- lookup->table[1].chip_label = "SM501-LOW";
- else
- lookup->table[1].chip_label = "SM501-HIGH";
- lookup->table[1].chip_hwnum = iic->pin_scl % 32;
- lookup->table[1].con_id = NULL;
- lookup->table[1].idx = 1;
- lookup->table[1].flags = GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN;
+ lookup->table[0] = (struct gpiod_lookup)
+ GPIO_LOOKUP_IDX(iic->pin_sda < 32 ? "SM501-LOW" : "SM501-HIGH",
+ iic->pin_sda % 32, NULL, 0,
+ GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN);
+ lookup->table[1] = (struct gpiod_lookup)
+ GPIO_LOOKUP_IDX(iic->pin_scl < 32 ? "SM501-LOW" : "SM501-HIGH",
+ iic->pin_scl % 32, NULL, 1,
+ GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN);
gpiod_add_lookup_table(lookup);
icd = dev_get_platdata(&pdev->dev);
--
2.17.1