2020-04-25 17:12:42

by Johan Jonker

Subject: [PATCH] dt-bindings: usb: dwc2: add power-domains property

A test with the command below gives this error:

arch/arm64/boot/dts/rockchip/px30-evb.dt.yaml: usb@ff300000:
'power-domains' does not match any of the regexes: 'pinctrl-[0-9]+'

With the conversion to yaml it also filters things
in a node that are used by other drivers like
'power-domains' for Rockchip px30 usb nodes,
so add them to 'dwc2.yaml'.

make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/usb/dwc2.yaml

Signed-off-by: Johan Jonker <[email protected]>
---
Documentation/devicetree/bindings/usb/dwc2.yaml | 3 +++
1 file changed, 3 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/dwc2.yaml b/Documentation/devicetree/bindings/usb/dwc2.yaml
index fb2f62aef..9352a8ef6 100644
--- a/Documentation/devicetree/bindings/usb/dwc2.yaml
+++ b/Documentation/devicetree/bindings/usb/dwc2.yaml
@@ -78,6 +78,9 @@ properties:
phy-names:
const: usb2-phy

+ power-domains:
+ maxItems: 1
+
vbus-supply:
description: reference to the VBUS regulator. Depending on the current mode
this is enabled (in "host" mode") or disabled (in "peripheral" mode). The
--
2.11.0

2020-05-11 22:29:52

by Rob Herring (Arm)

Subject: Re: [PATCH] dt-bindings: usb: dwc2: add power-domains property

On Sat, 25 Apr 2020 19:08:33 +0200, Johan Jonker wrote:
> A test with the command below gives this error:
>
> arch/arm64/boot/dts/rockchip/px30-evb.dt.yaml: usb@ff300000:
> 'power-domains' does not match any of the regexes: 'pinctrl-[0-9]+'
>
> With the conversion to yaml it also filters things
> in a node that are used by other drivers like
> 'power-domains' for Rockchip px30 usb nodes,
> so add them to 'dwc2.yaml'.
>
> make ARCH=arm64 dtbs_check
> DT_SCHEMA_FILES=Documentation/devicetree/bindings/usb/dwc2.yaml
>
> Signed-off-by: Johan Jonker <[email protected]>
> ---
> Documentation/devicetree/bindings/usb/dwc2.yaml | 3 +++
> 1 file changed, 3 insertions(+)
>

Applied, thanks!