On Mon, May 11, 2020 at 08:51:18AM +0200, Greg KH wrote:
> On Thu, May 07, 2020 at 09:59:18PM +0100, Sean Young wrote:
> > On Thu, May 07, 2020 at 01:25:46PM -0700, Dmitry Torokhov wrote:
> > > On Thu, May 07, 2020 at 02:53:36PM +0100, Sean Young wrote:
> > > > serio drivers can only send one byte at a time. If the underlying tty
> > > > is a usb serial port, then each byte will be put into separate usb
> > > > urbs, which is not efficient.
> > > >
> > > > Additionally, the Infrared Toy device refuses to transmit IR if the
> > > > IR data is sent one byte at a time. IR data is formatted in u16 values,
> > > > and the firmware expects complete u16 values in the packet.
> > > >
> > > > https://github.com/DangerousPrototypes/USB_IR_Toy/blob/master/Firmware-main/IRs.c#L240
> > >
> > > Ummm, serial protocol data size is at most 9 bits so I have no earthly
> > > idea how they expect to get 16.
> >
> > serio is a layer on top several serial protocols, including ttys. ttys allow
> > more than one byte to be written at a time, see struct tty_operations:
> >
> > int (*write)(struct tty_struct * tty,
> > const unsigned char *buf, int count);
> >
> > ttys would be very inefficient if you could only write one byte at a time,
> > and they are very serial.
> >
> > This patch exposes the underlying tty write() functionality to serio. When
> > the underlying tty is a usb serial port this makes for far fewer usb packets
> > being used to send the same data, and fixes my driver problem, and it
> > would reduce the number of calls in a few other cases too.
> >
> > I'm happy to rework the patch if there are comments on the style or
> > approach.
>
> Why not just use the ir-usb.c driver for this device instead?
So this device is the infrared kind which rc-core (in drivers/media/rc/)
supports, remotes and such things (not for serial IR). So by using a
rc-core driver, it can use kernel IR decoding, BPF decoding, lirc chardev
and rc keymaps, etc.
This device is a PIC18F2550 type device, which is a usb serial port
microcontroller type with some firmware and IR diodes:
http://dangerousprototypes.com/docs/USB_IR_Toy_v2
serio supports a whole bunch of usb serial devices which can be attached
via inputattach(1). Not all of these are input devices, for example there
are two cec devices too.
Now, in many of these drivers, multiple bytes need to be written to the
device in order to send it a command, for example in
drivers/input/touchscreen/elo.c:
for (i = 0; i < ELO10_PACKET_LEN; i++) {
csum += packet[i];
if (serio_write(elo->serio, packet[i]))
goto out;
}
So if serio had an interface for sending a buffer, that would be less
call overhead. In fact, if the underlying serio is a serial usb port,
that would much more efficient on the usb layer too (one usb roundtrips in
stead of ELO10_PACKET_LEN roundtrips), like so:
serio_write_buf(elo->serio, packet, ELO10_PACKET_LEN);
So what I'm suggesting is extending the serio interface to allow sending
a buffer of bytes. Of course serio isn't just usb serial ports. There quite
a few instances of serio_register_port() in the kernel. Many of them
can be extended to support sending a buffer rather than a single byte,
if this makes sense. For example the ps2 serio port takes a mutex for every
byte, so this could be more efficient by reducing it to one mutex lock
per buffer.
Now it would be nice to have a discussion about this rather than being
dismissed with:
> > > Ummm, serial protocol data size is at most 9 bits so I have no earthly
> > > idea how they expect to get 16.
Which is just a tad insulting.
Sean
On Tue, May 12, 2020 at 10:07:24AM +0100, Sean Young wrote:
> On Mon, May 11, 2020 at 08:51:18AM +0200, Greg KH wrote:
> > On Thu, May 07, 2020 at 09:59:18PM +0100, Sean Young wrote:
> > > On Thu, May 07, 2020 at 01:25:46PM -0700, Dmitry Torokhov wrote:
> > > > On Thu, May 07, 2020 at 02:53:36PM +0100, Sean Young wrote:
> > > > > serio drivers can only send one byte at a time. If the underlying tty
> > > > > is a usb serial port, then each byte will be put into separate usb
> > > > > urbs, which is not efficient.
> > > > >
> > > > > Additionally, the Infrared Toy device refuses to transmit IR if the
> > > > > IR data is sent one byte at a time. IR data is formatted in u16 values,
> > > > > and the firmware expects complete u16 values in the packet.
> > > > >
> > > > > https://github.com/DangerousPrototypes/USB_IR_Toy/blob/master/Firmware-main/IRs.c#L240
> > > >
> > > > Ummm, serial protocol data size is at most 9 bits so I have no earthly
> > > > idea how they expect to get 16.
> > >
> > > serio is a layer on top several serial protocols, including ttys. ttys allow
> > > more than one byte to be written at a time, see struct tty_operations:
> > >
> > > int (*write)(struct tty_struct * tty,
> > > const unsigned char *buf, int count);
> > >
> > > ttys would be very inefficient if you could only write one byte at a time,
> > > and they are very serial.
> > >
> > > This patch exposes the underlying tty write() functionality to serio. When
> > > the underlying tty is a usb serial port this makes for far fewer usb packets
> > > being used to send the same data, and fixes my driver problem, and it
> > > would reduce the number of calls in a few other cases too.
> > >
> > > I'm happy to rework the patch if there are comments on the style or
> > > approach.
> >
> > Why not just use the ir-usb.c driver for this device instead?
>
> So this device is the infrared kind which rc-core (in drivers/media/rc/)
> supports, remotes and such things (not for serial IR). So by using a
> rc-core driver, it can use kernel IR decoding, BPF decoding, lirc chardev
> and rc keymaps, etc.
>
> This device is a PIC18F2550 type device, which is a usb serial port
> microcontroller type with some firmware and IR diodes:
> http://dangerousprototypes.com/docs/USB_IR_Toy_v2
>
> serio supports a whole bunch of usb serial devices which can be attached
> via inputattach(1). Not all of these are input devices, for example there
> are two cec devices too.
>
> Now, in many of these drivers, multiple bytes need to be written to the
> device in order to send it a command, for example in
> drivers/input/touchscreen/elo.c:
>
> for (i = 0; i < ELO10_PACKET_LEN; i++) {
> csum += packet[i];
> if (serio_write(elo->serio, packet[i]))
> goto out;
> }
>
> So if serio had an interface for sending a buffer, that would be less
> call overhead. In fact, if the underlying serio is a serial usb port,
> that would much more efficient on the usb layer too (one usb roundtrips in
> stead of ELO10_PACKET_LEN roundtrips), like so:
>
> serio_write_buf(elo->serio, packet, ELO10_PACKET_LEN);
>
> So what I'm suggesting is extending the serio interface to allow sending
> a buffer of bytes. Of course serio isn't just usb serial ports. There quite
> a few instances of serio_register_port() in the kernel. Many of them
> can be extended to support sending a buffer rather than a single byte,
> if this makes sense. For example the ps2 serio port takes a mutex for every
> byte, so this could be more efficient by reducing it to one mutex lock
> per buffer.
>
> Now it would be nice to have a discussion about this rather than being
> dismissed with:
>
> > > > Ummm, serial protocol data size is at most 9 bits so I have no earthly
> > > > idea how they expect to get 16.
>
> Which is just a tad insulting.
That was not meant to be insulting, however serial protocol defines that
the data size is at most 9 bits, so expecting that one can transmit
anything more than that _atomically_ is wrong. If your device/firmware
requires 16 bits to be transferred as indivisible units, then serial
port abstraction is wrong one to be used.
Now serio is layer "above" serial ports (but does not have to have
an underlying serial port) that provides byte-oriented communication
that is expected to mostly flow into host. Its does not expect heavy
data flows coming from the host and into the device (if you look at all
the touchscreens, psmouse, etc, they all send initialization sequences
to the device, and then all the data flows into the host). Therefore
there is little benefit in optimizing serio writes.
You are using performance clams as a clutch for the requirement of
sending u16s, but as I mentioned it is wrong if you use serial ports
abstraction layer. Greg mentioned ir-usb. You can maybe enhance it, or
create a similar driver that connects USB to rc-core and ensures that
you can communicate with the device with exact format it needs.
Thanks.
--
Dmitry
On Tue, May 12, 2020 at 10:07:24AM +0100, Sean Young wrote:
> On Mon, May 11, 2020 at 08:51:18AM +0200, Greg KH wrote:
> > On Thu, May 07, 2020 at 09:59:18PM +0100, Sean Young wrote:
> > > On Thu, May 07, 2020 at 01:25:46PM -0700, Dmitry Torokhov wrote:
> > > > On Thu, May 07, 2020 at 02:53:36PM +0100, Sean Young wrote:
> > > > > serio drivers can only send one byte at a time. If the underlying tty
> > > > > is a usb serial port, then each byte will be put into separate usb
> > > > > urbs, which is not efficient.
> > > > >
> > > > > Additionally, the Infrared Toy device refuses to transmit IR if the
> > > > > IR data is sent one byte at a time. IR data is formatted in u16 values,
> > > > > and the firmware expects complete u16 values in the packet.
> > > > >
> > > > > https://github.com/DangerousPrototypes/USB_IR_Toy/blob/master/Firmware-main/IRs.c#L240
> > > >
> > > > Ummm, serial protocol data size is at most 9 bits so I have no earthly
> > > > idea how they expect to get 16.
> > >
> > > serio is a layer on top several serial protocols, including ttys. ttys allow
> > > more than one byte to be written at a time, see struct tty_operations:
> > >
> > > int (*write)(struct tty_struct * tty,
> > > const unsigned char *buf, int count);
> > >
> > > ttys would be very inefficient if you could only write one byte at a time,
> > > and they are very serial.
> > >
> > > This patch exposes the underlying tty write() functionality to serio. When
> > > the underlying tty is a usb serial port this makes for far fewer usb packets
> > > being used to send the same data, and fixes my driver problem, and it
> > > would reduce the number of calls in a few other cases too.
> > >
> > > I'm happy to rework the patch if there are comments on the style or
> > > approach.
> >
> > Why not just use the ir-usb.c driver for this device instead?
>
> So this device is the infrared kind which rc-core (in drivers/media/rc/)
> supports, remotes and such things (not for serial IR). So by using a
> rc-core driver, it can use kernel IR decoding, BPF decoding, lirc chardev
> and rc keymaps, etc.
So why do you want to user serio for this? serio should only be for
input devices with a serial protocol.
> This device is a PIC18F2550 type device, which is a usb serial port
> microcontroller type with some firmware and IR diodes:
> http://dangerousprototypes.com/docs/USB_IR_Toy_v2
>
> serio supports a whole bunch of usb serial devices which can be attached
> via inputattach(1). Not all of these are input devices, for example there
> are two cec devices too.
>
> Now, in many of these drivers, multiple bytes need to be written to the
> device in order to send it a command, for example in
> drivers/input/touchscreen/elo.c:
>
> for (i = 0; i < ELO10_PACKET_LEN; i++) {
> csum += packet[i];
> if (serio_write(elo->serio, packet[i]))
> goto out;
> }
>
> So if serio had an interface for sending a buffer, that would be less
> call overhead. In fact, if the underlying serio is a serial usb port,
> that would much more efficient on the usb layer too (one usb roundtrips in
> stead of ELO10_PACKET_LEN roundtrips), like so:
>
> serio_write_buf(elo->serio, packet, ELO10_PACKET_LEN);
>
> So what I'm suggesting is extending the serio interface to allow sending
> a buffer of bytes. Of course serio isn't just usb serial ports. There quite
> a few instances of serio_register_port() in the kernel. Many of them
> can be extended to support sending a buffer rather than a single byte,
> if this makes sense. For example the ps2 serio port takes a mutex for every
> byte, so this could be more efficient by reducing it to one mutex lock
> per buffer.
>
> Now it would be nice to have a discussion about this rather than being
> dismissed with:
I think a custom usb driver that exposes the interfaces as input devices
is going to be the simplest thing for you to do here as you will have
full control over the packet size and format much easier. Odds are it
will be less work overall for this.
thanks,
greg k-h
On Wed, May 13, 2020 at 10:16:46AM +0200, Greg KH wrote:
> On Tue, May 12, 2020 at 10:07:24AM +0100, Sean Young wrote:
> > So this device is the infrared kind which rc-core (in drivers/media/rc/)
> > supports, remotes and such things (not for serial IR). So by using a
> > rc-core driver, it can use kernel IR decoding, BPF decoding, lirc chardev
> > and rc keymaps, etc.
>
> So why do you want to user serio for this? serio should only be for
> input devices with a serial protocol.
Admittedly this is a bit tenuous.
What I'm trying to do is write a kernel driver which uses the usb serial
drivers, and not write a poor man's version of usb serial in the IR driver.
> I think a custom usb driver that exposes the interfaces as input devices
> is going to be the simplest thing for you to do here as you will have
> full control over the packet size and format much easier. Odds are it
> will be less work overall for this.
Admittedly I don't think it will be much code, so maybe it won't be so
ugly. It's just the code duplication I was trying to avoid.
So, I'll go ahead and as you suggest.
Thank you for your time and thoughts on this.
Sean
On Tue, May 12, 2020 at 10:37:27AM -0700, Dmitry Torokhov wrote:
> On Tue, May 12, 2020 at 10:07:24AM +0100, Sean Young wrote:
> > Now it would be nice to have a discussion about this rather than being
> > dismissed with:
> >
> > > > > Ummm, serial protocol data size is at most 9 bits so I have no earthly
> > > > > idea how they expect to get 16.
> >
> > Which is just a tad insulting.
>
> That was not meant to be insulting, however serial protocol defines that
> the data size is at most 9 bits, so expecting that one can transmit
> anything more than that _atomically_ is wrong. If your device/firmware
> requires 16 bits to be transferred as indivisible units, then serial
> port abstraction is wrong one to be used.
Honestly thank you for explaining that. I had no idea this was an abstract
point about the demarcations of serial port-ness.
There is no physical rs-232 cabling involved at all in this case.
> Now serio is layer "above" serial ports (but does not have to have
> an underlying serial port) that provides byte-oriented communication
> that is expected to mostly flow into host. Its does not expect heavy
> data flows coming from the host and into the device (if you look at all
> the touchscreens, psmouse, etc, they all send initialization sequences
> to the device, and then all the data flows into the host). Therefore
> there is little benefit in optimizing serio writes.
True, I didn't think this would make much of an measurable improvement,
but still, some.
> You are using performance clams as a clutch for the requirement of
> sending u16s, but as I mentioned it is wrong if you use serial ports
> abstraction layer. Greg mentioned ir-usb. You can maybe enhance it, or
> create a similar driver that connects USB to rc-core and ensures that
> you can communicate with the device with exact format it needs.
Yes, I'll go down this route.
Thank you for the discussion, it was very helpful.
Sean