2020-05-13 05:44:42

by Shengjiu Wang

[permalink] [raw]
Subject: [PATCH] ASoC: wm8962: Use force clear for WM8962_SYSCLK_ENA after reset

When CLOCKING2 is non-volatile register, we need force clear
the WM8962_SYSCLK_ENA bit after reset, for the value in cache
maybe 0 but in hardware it is 1. Otherwise there will issue
as below statement in driver.

/* SYSCLK defaults to on; make sure it is off so we can safely
* write to registers if the device is declocked.

Fixes: c38b608504aa ("ASoC: wm8962: set CLOCKING2 as non-volatile register")
Signed-off-by: Shengjiu Wang <[email protected]>
---
sound/soc/codecs/wm8962.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/codecs/wm8962.c b/sound/soc/codecs/wm8962.c
index 0a2cfff44441..08d19df8a700 100644
--- a/sound/soc/codecs/wm8962.c
+++ b/sound/soc/codecs/wm8962.c
@@ -3798,8 +3798,8 @@ static int wm8962_runtime_resume(struct device *dev)
/* SYSCLK defaults to on; make sure it is off so we can safely
* write to registers if the device is declocked.
*/
- regmap_update_bits(wm8962->regmap, WM8962_CLOCKING2,
- WM8962_SYSCLK_ENA, 0);
+ regmap_write_bits(wm8962->regmap, WM8962_CLOCKING2,
+ WM8962_SYSCLK_ENA, 0);

/* Ensure we have soft control over all registers */
regmap_update_bits(wm8962->regmap, WM8962_CLOCKING2,
--
2.21.0


2020-05-13 20:27:09

by Charles Keepax

[permalink] [raw]
Subject: Re: [PATCH] ASoC: wm8962: Use force clear for WM8962_SYSCLK_ENA after reset

On Wed, May 13, 2020 at 01:30:35PM +0800, Shengjiu Wang wrote:
> When CLOCKING2 is non-volatile register, we need force clear
> the WM8962_SYSCLK_ENA bit after reset, for the value in cache
> maybe 0 but in hardware it is 1. Otherwise there will issue
> as below statement in driver.
>
> /* SYSCLK defaults to on; make sure it is off so we can safely
> * write to registers if the device is declocked.
>
> Fixes: c38b608504aa ("ASoC: wm8962: set CLOCKING2 as non-volatile register")
> Signed-off-by: Shengjiu Wang <[email protected]>
> ---

Acked-by: Charles Keepax <[email protected]>

Thanks,
Charles

2020-05-13 20:41:37

by Mark Brown

[permalink] [raw]
Subject: Re: [PATCH] ASoC: wm8962: Use force clear for WM8962_SYSCLK_ENA after reset

On Wed, 13 May 2020 13:30:35 +0800, Shengjiu Wang wrote:
> When CLOCKING2 is non-volatile register, we need force clear
> the WM8962_SYSCLK_ENA bit after reset, for the value in cache
> maybe 0 but in hardware it is 1. Otherwise there will issue
> as below statement in driver.
>
> /* SYSCLK defaults to on; make sure it is off so we can safely
> * write to registers if the device is declocked.

Applied to

https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-5.7

Thanks!

[1/1] ASoC: wm8962: Use force clear for WM8962_SYSCLK_ENA after reset
commit: 65e412a01bc0161175a962abd5a7fef6a62d5c8e

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark