2020-05-14 13:19:45

by Jiaxun Yang

Subject: [PATCH v10 4/5] MIPS: DTS: Loongson64: Add PCI Controller Node

Add PCI Host controller node for Loongson64 with RS780E PCH dts.
Note that PCI interrupts are probed via legacy way, as different
machine have different interrupt arrangement, we can't cover all
of them in dt.

Signed-off-by: Jiaxun Yang <[email protected]>
---
arch/mips/boot/dts/loongson/rs780e-pch.dtsi | 12 ++++++++++++
1 file changed, 12 insertions(+)

diff --git a/arch/mips/boot/dts/loongson/rs780e-pch.dtsi b/arch/mips/boot/dts/loongson/rs780e-pch.dtsi
index 8687c4f7370a..d0d5d60a8697 100644
--- a/arch/mips/boot/dts/loongson/rs780e-pch.dtsi
+++ b/arch/mips/boot/dts/loongson/rs780e-pch.dtsi
@@ -9,6 +9,18 @@ bus@10000000 {
0 0x40000000 0 0x40000000 0 0x40000000
0xfd 0xfe000000 0xfd 0xfe000000 0 0x2000000 /* PCI Config Space */>;

+ pci@1a000000 {
+ compatible = "loongson,rs780e-pci";
+ device_type = "pci";
+ #address-cells = <3>;
+ #size-cells = <2>;
+
+ reg = <0 0x1a000000 0 0x02000000>;
+
+ ranges = <0x01000000 0 0x00004000 0 0x18004000 0 0x00004000>,
+ <0x02000000 0 0x40000000 0 0x40000000 0 0x40000000>;
+ };
+
isa {
compatible = "isa";
#address-cells = <2>;
--
2.26.2

2020-05-22 14:32:18

by Thomas Bogendoerfer

Subject: Re: [PATCH v10 4/5] MIPS: DTS: Loongson64: Add PCI Controller Node

On Thu, May 14, 2020 at 09:16:40PM +0800, Jiaxun Yang wrote:
> Add PCI Host controller node for Loongson64 with RS780E PCH dts.
> Note that PCI interrupts are probed via legacy way, as different
> machine have different interrupt arrangement, we can't cover all
> of them in dt.
>
> Signed-off-by: Jiaxun Yang <[email protected]>
> ---
> arch/mips/boot/dts/loongson/rs780e-pch.dtsi | 12 ++++++++++++
> 1 file changed, 12 insertions(+)

Acked-by: Thomas Bogendoerfer <[email protected]>

Thomas.

--
Crap can work. Given enough thrust pigs will fly, but it's not necessarily a
good idea. [ RFC1925, 2.3 ]