2020-05-15 00:33:37

by Eugeniu Rosca

[permalink] [raw]
Subject: [PATCH] usb: core: hub: limit HUB_QUIRK_DISABLE_AUTOSUSPEND to USB5534B

On Tue, May 12, 2020 at 09:36:07PM +0800, Kai-Heng Feng wrote [1]:
> This patch prevents my Raven Ridge xHCI from getting runtime suspend.

The problem described in v5.6 commit 1208f9e1d758c9 ("USB: hub: Fix the
broken detection of USB3 device in SMSC hub") applies solely to the
USB5534B hub [2] present on the Kingfisher Infotainment Carrier Board,
manufactured by Shimafuji Electric Inc [3].

Despite that, the aforementioned commit applied the quirk to _all_ hubs
carrying vendor ID 0x424 (i.e. SMSC), of which there are more [4] than
initially expected. Consequently, the quirk is now enabled on platforms
carrying SMSC/Microchip hub models which potentially don't exhibit the
original issue.

To avoid reports like [1], further limit the quirk's scope to
USB5534B [2], by employing both Vendor and Product ID checks.

Tested on H3ULCB + Kingfisher rev. M05.

[1] https://lore.kernel.org/linux-renesas-soc/[email protected]/
[2] https://www.microchip.com/wwwproducts/en/USB5534B
[3] http://www.shimafuji.co.jp/wp/wp-content/uploads/2018/08/SBEV-RCAR-KF-M06Board_HWSpecificationEN_Rev130.pdf
[4] https://devicehunt.com/search/type/usb/vendor/0424/device/any

Fixes: 1208f9e1d758c9 ("USB: hub: Fix the broken detection of USB3 device in SMSC hub")
Cc: [email protected] # v4.14+
Cc: Greg Kroah-Hartman <[email protected]>
Cc: Alan Stern <[email protected]>
Cc: Hardik Gajjar <[email protected]>
Cc: [email protected]
Cc: [email protected]
Reported-by: Kai-Heng Feng <[email protected]>
Signed-off-by: Eugeniu Rosca <[email protected]>
---
drivers/usb/core/hub.c | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
index 2b6565c06c23..fc748c731832 100644
--- a/drivers/usb/core/hub.c
+++ b/drivers/usb/core/hub.c
@@ -39,6 +39,7 @@

#define USB_VENDOR_GENESYS_LOGIC 0x05e3
#define USB_VENDOR_SMSC 0x0424
+#define USB_PRODUCT_USB5534B 0x5534
#define HUB_QUIRK_CHECK_PORT_AUTOSUSPEND 0x01
#define HUB_QUIRK_DISABLE_AUTOSUSPEND 0x02

@@ -5621,8 +5622,11 @@ static void hub_event(struct work_struct *work)
}

static const struct usb_device_id hub_id_table[] = {
- { .match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_CLASS,
+ { .match_flags = USB_DEVICE_ID_MATCH_VENDOR
+ | USB_DEVICE_ID_MATCH_PRODUCT
+ | USB_DEVICE_ID_MATCH_INT_CLASS,
.idVendor = USB_VENDOR_SMSC,
+ .idProduct = USB_PRODUCT_USB5534B,
.bInterfaceClass = USB_CLASS_HUB,
.driver_info = HUB_QUIRK_DISABLE_AUTOSUSPEND},
{ .match_flags = USB_DEVICE_ID_MATCH_VENDOR
--
2.26.2


2020-05-15 03:02:39

by Kai-Heng Feng

[permalink] [raw]
Subject: Re: [PATCH] usb: core: hub: limit HUB_QUIRK_DISABLE_AUTOSUSPEND to USB5534B



> On May 15, 2020, at 06:02, Eugeniu Rosca <[email protected]> wrote:
>
> On Tue, May 12, 2020 at 09:36:07PM +0800, Kai-Heng Feng wrote [1]:
>> This patch prevents my Raven Ridge xHCI from getting runtime suspend.
>
> The problem described in v5.6 commit 1208f9e1d758c9 ("USB: hub: Fix the
> broken detection of USB3 device in SMSC hub") applies solely to the
> USB5534B hub [2] present on the Kingfisher Infotainment Carrier Board,
> manufactured by Shimafuji Electric Inc [3].
>
> Despite that, the aforementioned commit applied the quirk to _all_ hubs
> carrying vendor ID 0x424 (i.e. SMSC), of which there are more [4] than
> initially expected. Consequently, the quirk is now enabled on platforms
> carrying SMSC/Microchip hub models which potentially don't exhibit the
> original issue.
>
> To avoid reports like [1], further limit the quirk's scope to
> USB5534B [2], by employing both Vendor and Product ID checks.
>
> Tested on H3ULCB + Kingfisher rev. M05.
>
> [1] https://lore.kernel.org/linux-renesas-soc/[email protected]/
> [2] https://www.microchip.com/wwwproducts/en/USB5534B
> [3] http://www.shimafuji.co.jp/wp/wp-content/uploads/2018/08/SBEV-RCAR-KF-M06Board_HWSpecificationEN_Rev130.pdf
> [4] https://devicehunt.com/search/type/usb/vendor/0424/device/any
>
> Fixes: 1208f9e1d758c9 ("USB: hub: Fix the broken detection of USB3 device in SMSC hub")
> Cc: [email protected] # v4.14+
> Cc: Greg Kroah-Hartman <[email protected]>
> Cc: Alan Stern <[email protected]>
> Cc: Hardik Gajjar <[email protected]>
> Cc: [email protected]
> Cc: [email protected]
> Reported-by: Kai-Heng Feng <[email protected]>
> Signed-off-by: Eugeniu Rosca <[email protected]>

Tested-by: Kai-Heng Feng <[email protected]>

> ---
> drivers/usb/core/hub.c | 6 +++++-
> 1 file changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c
> index 2b6565c06c23..fc748c731832 100644
> --- a/drivers/usb/core/hub.c
> +++ b/drivers/usb/core/hub.c
> @@ -39,6 +39,7 @@
>
> #define USB_VENDOR_GENESYS_LOGIC 0x05e3
> #define USB_VENDOR_SMSC 0x0424
> +#define USB_PRODUCT_USB5534B 0x5534
> #define HUB_QUIRK_CHECK_PORT_AUTOSUSPEND 0x01
> #define HUB_QUIRK_DISABLE_AUTOSUSPEND 0x02
>
> @@ -5621,8 +5622,11 @@ static void hub_event(struct work_struct *work)
> }
>
> static const struct usb_device_id hub_id_table[] = {
> - { .match_flags = USB_DEVICE_ID_MATCH_VENDOR | USB_DEVICE_ID_MATCH_INT_CLASS,
> + { .match_flags = USB_DEVICE_ID_MATCH_VENDOR
> + | USB_DEVICE_ID_MATCH_PRODUCT
> + | USB_DEVICE_ID_MATCH_INT_CLASS,
> .idVendor = USB_VENDOR_SMSC,
> + .idProduct = USB_PRODUCT_USB5534B,
> .bInterfaceClass = USB_CLASS_HUB,
> .driver_info = HUB_QUIRK_DISABLE_AUTOSUSPEND},
> { .match_flags = USB_DEVICE_ID_MATCH_VENDOR
> --
> 2.26.2
>