Change since v7:
- specify compatible property as const string
- add maxItem in required property
- squash keypad example nodes
- sort header file with alphabetic order
- align all define values and add MTK_ prefix to make more uniform
- change debounce value to default 16ms if not specified in dts
- remove extra braces
- separate clk prepare as an internal driver function
- add special compatible string
- modify CONFIG_KEYBOARD_MTK_KPD=m to build keypad as ko module
fengping.yu (3):
dt-bindings: Add keypad devicetree documentation
drivers: input: keyboard: Add mtk keypad driver
configs: defconfig: Add CONFIG_ng.yu (3):
dt-bindings: Add keypad devicetree documentation
drivers: input: keyboard: Add mtk keypad driver
configs: defconfig: Add CONFIG_KEYBOARD_MTK_KPD=m
.../devicetree/bindings/input/mtk-kpd.yaml | 94 +++++++
arch/arm64/configs/defconfig | 1 +
drivers/input/keyboard/Kconfig | 9 +
drivers/input/keyboard/Makefile | 1 +
drivers/input/keyboard/mtk-kpd.c | 231 ++++++++++++++++++
5 files changed, 336 insertions(+)
create mode 100644 Documentation/devicetree/bindings/input/mtk-kpd.yaml
create mode 100644 drivers/input/keyboard/mtk-kpd.c
--
2.18.0
On Fri, May 15, 2020 at 02:20:04PM +0800, Fengping Yu wrote:
>
> Change since v7:
> - specify compatible property as const string
> - add maxItem in required property
> - squash keypad example nodes
> - sort header file with alphabetic order
> - align all define values and add MTK_ prefix to make more uniform
> - change debounce value to default 16ms if not specified in dts
> - remove extra braces
> - separate clk prepare as an internal driver function
> - add special compatible string
> - modify CONFIG_KEYBOARD_MTK_KPD=m to build keypad as ko module
You forgot to address at least some of my comments...
>
> fengping.yu (3):
> dt-bindings: Add keypad devicetree documentation
> drivers: input: keyboard: Add mtk keypad driver
> configs: defconfig: Add CONFIG_ng.yu (3):
> dt-bindings: Add keypad devicetree documentation
> drivers: input: keyboard: Add mtk keypad driver
> configs: defconfig: Add CONFIG_KEYBOARD_MTK_KPD=m
>
> .../devicetree/bindings/input/mtk-kpd.yaml | 94 +++++++
> arch/arm64/configs/defconfig | 1 +
> drivers/input/keyboard/Kconfig | 9 +
> drivers/input/keyboard/Makefile | 1 +
> drivers/input/keyboard/mtk-kpd.c | 231 ++++++++++++++++++
> 5 files changed, 336 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/input/mtk-kpd.yaml
> create mode 100644 drivers/input/keyboard/mtk-kpd.c
>
> --
> 2.18.0
>
--
With Best Regards,
Andy Shevchenko