2020-05-20 01:45:23

by Christian Hewitt

[permalink] [raw]
Subject: [PATCH v4 0/5] arm64: dts: meson: add W400 dtsi and GT-King/Pro devices

This series combines patch 2 from [1] which converts the existing Ugoos
AM6 device-tree to a common W400 dtsi and dts, and then reworks the
Beelink GT-King/GT-King Pro series from [2] to use the dtsi, but this
time without the offending common audio dtsi approach. I've carried
forwards acks on bindings from Rob as these did not change.

v4 - rebased against Kevin's v5.8/dt64 branch

v3 - amend author full-name on bindings patch

[1] https://patchwork.kernel.org/patch/11497105/
[2] https://patchwork.kernel.org/project/linux-amlogic/list/?series=273483

Christian Hewitt (5):
arm64: dts: meson: convert ugoos-am6 to common w400 dtsi
dt-bindings: arm: amlogic: add support for the Beelink GT-King
arm64: dts: meson-g12b-gtking: add initial device-tree
dt-bindings: arm: amlogic: add support for the Beelink GT-King Pro
arm64: dts: meson-g12b-gtking-pro: add initial device-tree

.../devicetree/bindings/arm/amlogic.yaml | 2 +
arch/arm64/boot/dts/amlogic/Makefile | 2 +
.../dts/amlogic/meson-g12b-gtking-pro.dts | 125 ++++++
.../boot/dts/amlogic/meson-g12b-gtking.dts | 145 ++++++
.../boot/dts/amlogic/meson-g12b-ugoos-am6.dts | 375 +---------------
.../boot/dts/amlogic/meson-g12b-w400.dtsi | 423 ++++++++++++++++++
6 files changed, 698 insertions(+), 374 deletions(-)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts
create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi

--
2.17.1


2020-05-20 01:45:27

by Christian Hewitt

[permalink] [raw]
Subject: [PATCH v4 1/5] arm64: dts: meson: convert ugoos-am6 to common w400 dtsi

Convert the Ugoos AM6 dts into meson-g12b-w400.dtsi, and then create
a new AM6 dts that references it. This is in preparation for several
new G12B devices that will share the common w400 dtsi.

Signed-off-by: Christian Hewitt <[email protected]>
---
.../boot/dts/amlogic/meson-g12b-ugoos-am6.dts | 375 +---------------
.../boot/dts/amlogic/meson-g12b-w400.dtsi | 423 ++++++++++++++++++
2 files changed, 424 insertions(+), 374 deletions(-)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi

diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
index de257c1b6d9d..a8331330011a 100644
--- a/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-ugoos-am6.dts
@@ -7,42 +7,13 @@

/dts-v1/;

-#include "meson-g12b.dtsi"
-#include "meson-g12b-s922x.dtsi"
-#include <dt-bindings/input/input.h>
-#include <dt-bindings/gpio/meson-g12a-gpio.h>
+#include "meson-g12b-w400.dtsi"
#include <dt-bindings/sound/meson-g12a-tohdmitx.h>

/ {
compatible = "ugoos,am6", "amlogic,s922x", "amlogic,g12b";
model = "Ugoos AM6";

- aliases {
- serial0 = &uart_AO;
- ethernet0 = &ethmac;
- };
-
- chosen {
- stdout-path = "serial0:115200n8";
- };
-
- memory@0 {
- device_type = "memory";
- reg = <0x0 0x0 0x0 0x40000000>;
- };
-
- emmc_pwrseq: emmc-pwrseq {
- compatible = "mmc-pwrseq-emmc";
- reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
- };
-
- sdio_pwrseq: sdio-pwrseq {
- compatible = "mmc-pwrseq-simple";
- reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
- clocks = <&wifi32k>;
- clock-names = "ext_clock";
- };
-
spdif_dit: audio-codec-1 {
#sound-dai-cells = <0>;
compatible = "linux,spdif-dit";
@@ -50,154 +21,6 @@
sound-name-prefix = "DIT";
};

- flash_1v8: regulator-flash_1v8 {
- compatible = "regulator-fixed";
- regulator-name = "FLASH_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vcc_3v3>;
- regulator-always-on;
- };
-
- main_12v: regulator-main_12v {
- compatible = "regulator-fixed";
- regulator-name = "12V";
- regulator-min-microvolt = <12000000>;
- regulator-max-microvolt = <12000000>;
- regulator-always-on;
- };
-
- vcc_5v: regulator-vcc_5v {
- compatible = "regulator-fixed";
- regulator-name = "VCC_5V";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&main_12v>;
-
- gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
- enable-active-high;
- };
-
- vcc_1v8: regulator-vcc_1v8 {
- compatible = "regulator-fixed";
- regulator-name = "VCC_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vcc_3v3>;
- regulator-always-on;
- };
-
- vcc_3v3: regulator-vcc_3v3 {
- compatible = "regulator-fixed";
- regulator-name = "VCC_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&vddao_3v3>;
- regulator-always-on;
- /* FIXME: actually controlled by VDDCPU_B_EN */
- };
-
- vddcpu_a: regulator-vddcpu-a {
- /*
- * MP1653 Regulator.
- */
- compatible = "pwm-regulator";
-
- regulator-name = "VDDCPU_A";
- regulator-min-microvolt = <721000>;
- regulator-max-microvolt = <1022000>;
-
- vin-supply = <&main_12v>;
-
- pwms = <&pwm_ab 0 1250 0>;
- pwm-dutycycle-range = <100 0>;
-
- regulator-boot-on;
- regulator-always-on;
- };
-
- vddcpu_b: regulator-vddcpu-b {
- /*
- * MP1652 Regulator.
- */
- compatible = "pwm-regulator";
-
- regulator-name = "VDDCPU_B";
- regulator-min-microvolt = <721000>;
- regulator-max-microvolt = <1022000>;
-
- vin-supply = <&main_12v>;
-
- pwms = <&pwm_AO_cd 1 1250 0>;
- pwm-dutycycle-range = <100 0>;
-
- regulator-boot-on;
- regulator-always-on;
- };
-
- usb1_pow: regulator-usb1-pow {
- compatible = "regulator-fixed";
- regulator-name = "USB1_POW";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&vcc_5v>;
-
- /* connected to SY6280A Power Switch */
- gpio = <&gpio GPIOA_8 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- usb_pwr_en: regulator-usb-pwr-en {
- compatible = "regulator-fixed";
- regulator-name = "USB_PWR_EN";
- regulator-min-microvolt = <5000000>;
- regulator-max-microvolt = <5000000>;
- vin-supply = <&vcc_5v>;
-
- /* Connected to USB3 Type-A Port power enable */
- gpio = <&gpio GPIOAO_7 GPIO_ACTIVE_HIGH>;
- enable-active-high;
- };
-
- vddao_1v8: regulator-vddao-1v8 {
- compatible = "regulator-fixed";
- regulator-name = "VDDAO_1V8";
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- vin-supply = <&vddao_3v3>;
- regulator-always-on;
- };
-
- vddao_3v3: regulator-vddao-3v3 {
- compatible = "regulator-fixed";
- regulator-name = "VDDAO_3V3";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- vin-supply = <&main_12v>;
- regulator-always-on;
- };
-
- cvbs-connector {
- compatible = "composite-video-connector";
-
- port {
- cvbs_connector_in: endpoint {
- remote-endpoint = <&cvbs_vdac_out>;
- };
- };
- };
-
- hdmi-connector {
- compatible = "hdmi-connector";
- type = "a";
-
- port {
- hdmi_connector_in: endpoint {
- remote-endpoint = <&hdmi_tx_tmds_out>;
- };
- };
- };
-
sound {
compatible = "amlogic,axg-sound-card";
model = "G12B-UGOOS-AM6";
@@ -277,110 +100,16 @@
};
};
};
-
- wifi32k: wifi32k {
- compatible = "pwm-clock";
- #clock-cells = <0>;
- clock-frequency = <32768>;
- pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
- };
};

&arb {
status = "okay";
};

-&cec_AO {
- pinctrl-0 = <&cec_ao_a_h_pins>;
- pinctrl-names = "default";
- status = "disabled";
- hdmi-phandle = <&hdmi_tx>;
-};
-
-&cecb_AO {
- pinctrl-0 = <&cec_ao_b_h_pins>;
- pinctrl-names = "default";
- status = "okay";
- hdmi-phandle = <&hdmi_tx>;
-};
-
&clkc_audio {
status = "okay";
};

-&cpu0 {
- cpu-supply = <&vddcpu_b>;
- operating-points-v2 = <&cpu_opp_table_0>;
- clocks = <&clkc CLKID_CPU_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu1 {
- cpu-supply = <&vddcpu_b>;
- operating-points-v2 = <&cpu_opp_table_0>;
- clocks = <&clkc CLKID_CPU_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu100 {
- cpu-supply = <&vddcpu_a>;
- operating-points-v2 = <&cpub_opp_table_1>;
- clocks = <&clkc CLKID_CPUB_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu101 {
- cpu-supply = <&vddcpu_a>;
- operating-points-v2 = <&cpub_opp_table_1>;
- clocks = <&clkc CLKID_CPUB_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu102 {
- cpu-supply = <&vddcpu_a>;
- operating-points-v2 = <&cpub_opp_table_1>;
- clocks = <&clkc CLKID_CPUB_CLK>;
- clock-latency = <50000>;
-};
-
-&cpu103 {
- cpu-supply = <&vddcpu_a>;
- operating-points-v2 = <&cpub_opp_table_1>;
- clocks = <&clkc CLKID_CPUB_CLK>;
- clock-latency = <50000>;
-};
-
-&cvbs_vdac_port {
- cvbs_vdac_out: endpoint {
- remote-endpoint = <&cvbs_connector_in>;
- };
-};
-
-&ext_mdio {
- external_phy: ethernet-phy@0 {
- /* Realtek RTL8211F (0x001cc916) */
- reg = <0>;
- max-speed = <1000>;
-
- reset-assert-us = <10000>;
- reset-deassert-us = <30000>;
- reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
-
- interrupt-parent = <&gpio_intc>;
- /* MAC_INTR on GPIOZ_14 */
- interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
- };
-};
-
-&ethmac {
- pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
- pinctrl-names = "default";
- status = "okay";
- phy-mode = "rgmii";
- phy-handle = <&external_phy>;
- amlogic,tx-delay-ns = <2>;
-};
-
&frddr_a {
status = "okay";
};
@@ -393,112 +122,10 @@
status = "okay";
};

-&hdmi_tx {
- status = "okay";
- pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
- pinctrl-names = "default";
- hdmi-supply = <&vcc_5v>;
-};
-
-&hdmi_tx_tmds_port {
- hdmi_tx_tmds_out: endpoint {
- remote-endpoint = <&hdmi_connector_in>;
- };
-};
-
&ir {
- status = "okay";
- pinctrl-0 = <&remote_input_ao_pins>;
- pinctrl-names = "default";
linux,rc-map-name = "rc-khadas";
};

-&pwm_ab {
- pinctrl-0 = <&pwm_a_e_pins>;
- pinctrl-names = "default";
- clocks = <&xtal>;
- clock-names = "clkin0";
- status = "okay";
-};
-
-&pwm_AO_cd {
- pinctrl-0 = <&pwm_ao_d_e_pins>;
- pinctrl-names = "default";
- clocks = <&xtal>;
- clock-names = "clkin1";
- status = "okay";
-};
-
-&pwm_ef {
- pinctrl-0 = <&pwm_e_pins>;
- pinctrl-names = "default";
- clocks = <&xtal>;
- clock-names = "clkin0";
- status = "okay";
-};
-
-/* SDIO */
-&sd_emmc_a {
- status = "okay";
- pinctrl-0 = <&sdio_pins>;
- pinctrl-1 = <&sdio_clk_gate_pins>;
- pinctrl-names = "default", "clk-gate";
- #address-cells = <1>;
- #size-cells = <0>;
-
- bus-width = <4>;
- cap-sd-highspeed;
- sd-uhs-sdr50;
- max-frequency = <100000000>;
-
- non-removable;
- disable-wp;
-
- mmc-pwrseq = <&sdio_pwrseq>;
-
- vmmc-supply = <&vddao_3v3>;
- vqmmc-supply = <&vddao_1v8>;
-
- brcmf: wifi@1 {
- reg = <1>;
- compatible = "brcm,bcm4329-fmac";
- };
-};
-
-/* SD card */
-&sd_emmc_b {
- status = "okay";
- pinctrl-0 = <&sdcard_c_pins>;
- pinctrl-1 = <&sdcard_clk_gate_c_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <4>;
- cap-sd-highspeed;
- max-frequency = <50000000>;
- disable-wp;
-
- cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
- vmmc-supply = <&vddao_3v3>;
- vqmmc-supply = <&vddao_3v3>;
-};
-
-/* eMMC */
-&sd_emmc_c {
- status = "okay";
- pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
- pinctrl-1 = <&emmc_clk_gate_pins>;
- pinctrl-names = "default", "clk-gate";
-
- bus-width = <8>;
- cap-mmc-highspeed;
- max-frequency = <100000000>;
- disable-wp;
-
- mmc-pwrseq = <&emmc_pwrseq>;
- vmmc-supply = <&vcc_3v3>;
- vqmmc-supply = <&flash_1v8>;
-};
-
&spdifout {
pinctrl-0 = <&spdif_out_h_pins>;
pinctrl-names = "default";
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi b/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
new file mode 100644
index 000000000000..98b70d216a6f
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-w400.dtsi
@@ -0,0 +1,423 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <[email protected]>
+ * Copyright (c) 2019 Christian Hewitt <[email protected]>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b.dtsi"
+#include "meson-g12b-s922x.dtsi"
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/gpio/meson-g12a-gpio.h>
+
+/ {
+ aliases {
+ serial0 = &uart_AO;
+ ethernet0 = &ethmac;
+ };
+
+ chosen {
+ stdout-path = "serial0:115200n8";
+ };
+
+ memory@0 {
+ device_type = "memory";
+ reg = <0x0 0x0 0x0 0x40000000>;
+ };
+
+ emmc_pwrseq: emmc-pwrseq {
+ compatible = "mmc-pwrseq-emmc";
+ reset-gpios = <&gpio BOOT_12 GPIO_ACTIVE_LOW>;
+ };
+
+ sdio_pwrseq: sdio-pwrseq {
+ compatible = "mmc-pwrseq-simple";
+ reset-gpios = <&gpio GPIOX_6 GPIO_ACTIVE_LOW>;
+ clocks = <&wifi32k>;
+ clock-names = "ext_clock";
+ };
+
+ flash_1v8: regulator-flash_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "FLASH_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_3v3>;
+ regulator-always-on;
+ };
+
+ main_12v: regulator-main_12v {
+ compatible = "regulator-fixed";
+ regulator-name = "12V";
+ regulator-min-microvolt = <12000000>;
+ regulator-max-microvolt = <12000000>;
+ regulator-always-on;
+ };
+
+ vcc_5v: regulator-vcc_5v {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_5V";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&main_12v>;
+
+ gpio = <&gpio GPIOH_8 GPIO_OPEN_DRAIN>;
+ enable-active-high;
+ };
+
+ vcc_1v8: regulator-vcc_1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vcc_3v3>;
+ regulator-always-on;
+ };
+
+ vcc_3v3: regulator-vcc_3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VCC_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&vddao_3v3>;
+ regulator-always-on;
+ /* FIXME: actually controlled by VDDCPU_B_EN */
+ };
+
+ vddcpu_a: regulator-vddcpu-a {
+ /*
+ * MP1653 Regulator.
+ */
+ compatible = "pwm-regulator";
+
+ regulator-name = "VDDCPU_A";
+ regulator-min-microvolt = <721000>;
+ regulator-max-microvolt = <1022000>;
+
+ vin-supply = <&main_12v>;
+
+ pwms = <&pwm_ab 0 1250 0>;
+ pwm-dutycycle-range = <100 0>;
+
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ vddcpu_b: regulator-vddcpu-b {
+ /*
+ * MP1652 Regulator.
+ */
+ compatible = "pwm-regulator";
+
+ regulator-name = "VDDCPU_B";
+ regulator-min-microvolt = <721000>;
+ regulator-max-microvolt = <1022000>;
+
+ vin-supply = <&main_12v>;
+
+ pwms = <&pwm_AO_cd 1 1250 0>;
+ pwm-dutycycle-range = <100 0>;
+
+ regulator-boot-on;
+ regulator-always-on;
+ };
+
+ usb1_pow: regulator-usb1-pow {
+ compatible = "regulator-fixed";
+ regulator-name = "USB1_POW";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc_5v>;
+
+ /* connected to SY6280A Power Switch */
+ gpio = <&gpio GPIOA_8 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ usb_pwr_en: regulator-usb-pwr-en {
+ compatible = "regulator-fixed";
+ regulator-name = "USB_PWR_EN";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ vin-supply = <&vcc_5v>;
+
+ /* Connected to USB3 Type-A Port power enable */
+ gpio = <&gpio GPIOAO_7 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ vddao_1v8: regulator-vddao-1v8 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDAO_1V8";
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ vin-supply = <&vddao_3v3>;
+ regulator-always-on;
+ };
+
+ vddao_3v3: regulator-vddao-3v3 {
+ compatible = "regulator-fixed";
+ regulator-name = "VDDAO_3V3";
+ regulator-min-microvolt = <3300000>;
+ regulator-max-microvolt = <3300000>;
+ vin-supply = <&main_12v>;
+ regulator-always-on;
+ };
+
+ cvbs-connector {
+ compatible = "composite-video-connector";
+
+ port {
+ cvbs_connector_in: endpoint {
+ remote-endpoint = <&cvbs_vdac_out>;
+ };
+ };
+ };
+
+ hdmi-connector {
+ compatible = "hdmi-connector";
+ type = "a";
+
+ port {
+ hdmi_connector_in: endpoint {
+ remote-endpoint = <&hdmi_tx_tmds_out>;
+ };
+ };
+ };
+
+ wifi32k: wifi32k {
+ compatible = "pwm-clock";
+ #clock-cells = <0>;
+ clock-frequency = <32768>;
+ pwms = <&pwm_ef 0 30518 0>; /* PWM_E at 32.768KHz */
+ };
+};
+
+&cec_AO {
+ pinctrl-0 = <&cec_ao_a_h_pins>;
+ pinctrl-names = "default";
+ status = "disabled";
+ hdmi-phandle = <&hdmi_tx>;
+};
+
+&cecb_AO {
+ pinctrl-0 = <&cec_ao_b_h_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ hdmi-phandle = <&hdmi_tx>;
+};
+
+&cpu0 {
+ cpu-supply = <&vddcpu_b>;
+ operating-points-v2 = <&cpu_opp_table_0>;
+ clocks = <&clkc CLKID_CPU_CLK>;
+ clock-latency = <50000>;
+};
+
+&cpu1 {
+ cpu-supply = <&vddcpu_b>;
+ operating-points-v2 = <&cpu_opp_table_0>;
+ clocks = <&clkc CLKID_CPU_CLK>;
+ clock-latency = <50000>;
+};
+
+&cpu100 {
+ cpu-supply = <&vddcpu_a>;
+ operating-points-v2 = <&cpub_opp_table_1>;
+ clocks = <&clkc CLKID_CPUB_CLK>;
+ clock-latency = <50000>;
+};
+
+&cpu101 {
+ cpu-supply = <&vddcpu_a>;
+ operating-points-v2 = <&cpub_opp_table_1>;
+ clocks = <&clkc CLKID_CPUB_CLK>;
+ clock-latency = <50000>;
+};
+
+&cpu102 {
+ cpu-supply = <&vddcpu_a>;
+ operating-points-v2 = <&cpub_opp_table_1>;
+ clocks = <&clkc CLKID_CPUB_CLK>;
+ clock-latency = <50000>;
+};
+
+&cpu103 {
+ cpu-supply = <&vddcpu_a>;
+ operating-points-v2 = <&cpub_opp_table_1>;
+ clocks = <&clkc CLKID_CPUB_CLK>;
+ clock-latency = <50000>;
+};
+
+&cvbs_vdac_port {
+ cvbs_vdac_out: endpoint {
+ remote-endpoint = <&cvbs_connector_in>;
+ };
+};
+
+&ext_mdio {
+ external_phy: ethernet-phy@0 {
+ /* Realtek RTL8211F (0x001cc916) */
+ reg = <0>;
+ max-speed = <1000>;
+
+ reset-assert-us = <10000>;
+ reset-deassert-us = <30000>;
+ reset-gpios = <&gpio GPIOZ_15 (GPIO_ACTIVE_LOW | GPIO_OPEN_DRAIN)>;
+
+ interrupt-parent = <&gpio_intc>;
+ /* MAC_INTR on GPIOZ_14 */
+ interrupts = <26 IRQ_TYPE_LEVEL_LOW>;
+ };
+};
+
+&ethmac {
+ pinctrl-0 = <&eth_pins>, <&eth_rgmii_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+ phy-mode = "rgmii";
+ phy-handle = <&external_phy>;
+ amlogic,tx-delay-ns = <2>;
+};
+
+&hdmi_tx {
+ status = "okay";
+ pinctrl-0 = <&hdmitx_hpd_pins>, <&hdmitx_ddc_pins>;
+ pinctrl-names = "default";
+ hdmi-supply = <&vcc_5v>;
+};
+
+&hdmi_tx_tmds_port {
+ hdmi_tx_tmds_out: endpoint {
+ remote-endpoint = <&hdmi_connector_in>;
+ };
+};
+
+&ir {
+ status = "okay";
+ pinctrl-0 = <&remote_input_ao_pins>;
+ pinctrl-names = "default";
+};
+
+&pwm_ab {
+ pinctrl-0 = <&pwm_a_e_pins>;
+ pinctrl-names = "default";
+ clocks = <&xtal>;
+ clock-names = "clkin0";
+ status = "okay";
+};
+
+&pwm_AO_cd {
+ pinctrl-0 = <&pwm_ao_d_e_pins>;
+ pinctrl-names = "default";
+ clocks = <&xtal>;
+ clock-names = "clkin1";
+ status = "okay";
+};
+
+&pwm_ef {
+ pinctrl-0 = <&pwm_e_pins>;
+ pinctrl-names = "default";
+ clocks = <&xtal>;
+ clock-names = "clkin0";
+ status = "okay";
+};
+
+/* SDIO */
+&sd_emmc_a {
+ status = "okay";
+ pinctrl-0 = <&sdio_pins>;
+ pinctrl-1 = <&sdio_clk_gate_pins>;
+ pinctrl-names = "default", "clk-gate";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ sd-uhs-sdr50;
+ max-frequency = <100000000>;
+
+ non-removable;
+ disable-wp;
+
+ mmc-pwrseq = <&sdio_pwrseq>;
+
+ vmmc-supply = <&vddao_3v3>;
+ vqmmc-supply = <&vddao_1v8>;
+
+ brcmf: wifi@1 {
+ reg = <1>;
+ compatible = "brcm,bcm4329-fmac";
+ };
+};
+
+/* SD card */
+&sd_emmc_b {
+ status = "okay";
+ pinctrl-0 = <&sdcard_c_pins>;
+ pinctrl-1 = <&sdcard_clk_gate_c_pins>;
+ pinctrl-names = "default", "clk-gate";
+
+ bus-width = <4>;
+ cap-sd-highspeed;
+ max-frequency = <50000000>;
+ disable-wp;
+
+ cd-gpios = <&gpio GPIOC_6 GPIO_ACTIVE_LOW>;
+ vmmc-supply = <&vddao_3v3>;
+ vqmmc-supply = <&vddao_3v3>;
+};
+
+/* eMMC */
+&sd_emmc_c {
+ status = "okay";
+ pinctrl-0 = <&emmc_ctrl_pins>, <&emmc_data_8b_pins>, <&emmc_ds_pins>;
+ pinctrl-1 = <&emmc_clk_gate_pins>;
+ pinctrl-names = "default", "clk-gate";
+
+ bus-width = <8>;
+ cap-mmc-highspeed;
+ max-frequency = <100000000>;
+ disable-wp;
+
+ mmc-pwrseq = <&emmc_pwrseq>;
+ vmmc-supply = <&vcc_3v3>;
+ vqmmc-supply = <&flash_1v8>;
+};
+
+&uart_A {
+ status = "okay";
+ pinctrl-0 = <&uart_a_pins>, <&uart_a_cts_rts_pins>;
+ pinctrl-names = "default";
+ uart-has-rtscts;
+
+ bluetooth {
+ compatible = "brcm,bcm43438-bt";
+ shutdown-gpios = <&gpio GPIOX_17 GPIO_ACTIVE_HIGH>;
+ max-speed = <2000000>;
+ clocks = <&wifi32k>;
+ clock-names = "lpo";
+ };
+};
+
+&uart_AO {
+ status = "okay";
+ pinctrl-0 = <&uart_ao_a_pins>;
+ pinctrl-names = "default";
+};
+
+&usb {
+ status = "okay";
+ dr_mode = "host";
+ vbus-supply = <&usb_pwr_en>;
+};
+
+&usb2_phy0 {
+ phy-supply = <&usb1_pow>;
+};
+
+&usb2_phy1 {
+ phy-supply = <&usb1_pow>;
+};
--
2.17.1

2020-05-20 01:45:35

by Christian Hewitt

[permalink] [raw]
Subject: [PATCH v4 2/5] dt-bindings: arm: amlogic: add support for the Beelink GT-King

The Shenzen AZW (Beelink) GT-King is based on the Amlogic W400 reference
board with an S922X chip.

Acked-by: Rob Herring <[email protected]>
Signed-off-by: Christian Hewitt <[email protected]>
---
Documentation/devicetree/bindings/arm/amlogic.yaml | 1 +
1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml
index 47badda69ef5..cd7a081a4f17 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.yaml
+++ b/Documentation/devicetree/bindings/arm/amlogic.yaml
@@ -149,6 +149,7 @@ properties:
- description: Boards with the Amlogic Meson G12B S922X SoC
items:
- enum:
+ - azw,gtking
- hardkernel,odroid-n2
- khadas,vim3
- ugoos,am6
--
2.17.1

2020-05-20 01:45:51

by Christian Hewitt

[permalink] [raw]
Subject: [PATCH v4 3/5] arm64: dts: meson-g12b-gtking: add initial device-tree

The Shenzen AZW (Beelink) GT-King is based on the Amlogic W400 reference
board with an S922X chip.

- 4GB LPDDR4 RAM
- 64GB eMMC storage
- 10/100/1000 Base-T Ethernet
- AP6356S Wireless (802.11 a/b/g/n/ac, BT 4.1)
- HDMI 2.1 video
- S/PDIF optical output
- Analogue audio output
- 1x USB 2.0 port
- 2x USB 3.0 ports
- IR receiver
- 1x micro SD card slot

Signed-off-by: Christian Hewitt <[email protected]>
---
arch/arm64/boot/dts/amlogic/Makefile | 1 +
.../boot/dts/amlogic/meson-g12b-gtking.dts | 145 ++++++++++++++++++
2 files changed, 146 insertions(+)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts

diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index af883e0bfb9c..8c9e9dfa5da3 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -3,6 +3,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-axg-s400.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-s922x-khadas-vim3.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts
new file mode 100644
index 000000000000..eeb7bc5539ef
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking.dts
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <[email protected]>
+ * Copyright (c) 2019 Christian Hewitt <[email protected]>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-w400.dtsi"
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+ compatible = "azw,gtking", "amlogic,g12b";
+ model = "Beelink GT-King";
+
+ spdif_dit: audio-codec-1 {
+ #sound-dai-cells = <0>;
+ compatible = "linux,spdif-dit";
+ status = "okay";
+ sound-name-prefix = "DIT";
+ };
+
+ sound {
+ compatible = "amlogic,axg-sound-card";
+ model = "G12B-GTKING";
+ audio-aux-devs = <&tdmout_b>;
+ audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+ "TDMOUT_B IN 1", "FRDDR_B OUT 1",
+ "TDMOUT_B IN 2", "FRDDR_C OUT 1",
+ "TDM_B Playback", "TDMOUT_B OUT",
+ "SPDIFOUT IN 0", "FRDDR_A OUT 3",
+ "SPDIFOUT IN 1", "FRDDR_B OUT 3",
+ "SPDIFOUT IN 2", "FRDDR_C OUT 3";
+
+ assigned-clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+ assigned-clock-parents = <0>, <0>, <0>;
+ assigned-clock-rates = <294912000>,
+ <270950400>,
+ <393216000>;
+ status = "okay";
+
+ dai-link-0 {
+ sound-dai = <&frddr_a>;
+ };
+
+ dai-link-1 {
+ sound-dai = <&frddr_b>;
+ };
+
+ dai-link-2 {
+ sound-dai = <&frddr_c>;
+ };
+
+ /* 8ch hdmi interface */
+ dai-link-3 {
+ sound-dai = <&tdmif_b>;
+ dai-format = "i2s";
+ dai-tdm-slot-tx-mask-0 = <1 1>;
+ dai-tdm-slot-tx-mask-1 = <1 1>;
+ dai-tdm-slot-tx-mask-2 = <1 1>;
+ dai-tdm-slot-tx-mask-3 = <1 1>;
+ mclk-fs = <256>;
+
+ codec {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+ };
+ };
+
+ /* spdif hdmi or toslink interface */
+ dai-link-4 {
+ sound-dai = <&spdifout>;
+
+ codec-0 {
+ sound-dai = <&spdif_dit>;
+ };
+
+ codec-1 {
+ sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_A>;
+ };
+ };
+
+ /* spdif hdmi interface */
+ dai-link-5 {
+ sound-dai = <&spdifout_b>;
+
+ codec {
+ sound-dai = <&tohdmitx TOHDMITX_SPDIF_IN_B>;
+ };
+ };
+
+ /* hdmi glue */
+ dai-link-6 {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+ codec {
+ sound-dai = <&hdmi_tx>;
+ };
+ };
+ };
+};
+
+&arb {
+ status = "okay";
+};
+
+&clkc_audio {
+ status = "okay";
+};
+
+&frddr_a {
+ status = "okay";
+};
+
+&frddr_b {
+ status = "okay";
+};
+
+&frddr_c {
+ status = "okay";
+};
+
+&spdifout {
+ pinctrl-0 = <&spdif_out_h_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&spdifout_b {
+ status = "okay";
+};
+
+&tdmif_b {
+ status = "okay";
+};
+
+&tdmout_b {
+ status = "okay";
+};
+
+&tohdmitx {
+ status = "okay";
+};
--
2.17.1

2020-05-20 01:46:27

by Christian Hewitt

[permalink] [raw]
Subject: [PATCH v4 4/5] dt-bindings: arm: amlogic: add support for the Beelink GT-King Pro

The Shenzen AZW (Beelink) GT-King Pro is based on the Amlogic W400 reference
board with an S922X chip.

Acked-by: Rob Herring <[email protected]>
Signed-off-by: Christian Hewitt <[email protected]>
---
Documentation/devicetree/bindings/arm/amlogic.yaml | 1 +
1 file changed, 1 insertion(+)

diff --git a/Documentation/devicetree/bindings/arm/amlogic.yaml b/Documentation/devicetree/bindings/arm/amlogic.yaml
index cd7a081a4f17..db35e0d0134c 100644
--- a/Documentation/devicetree/bindings/arm/amlogic.yaml
+++ b/Documentation/devicetree/bindings/arm/amlogic.yaml
@@ -150,6 +150,7 @@ properties:
items:
- enum:
- azw,gtking
+ - azw,gtking-pro
- hardkernel,odroid-n2
- khadas,vim3
- ugoos,am6
--
2.17.1

2020-05-20 01:48:03

by Christian Hewitt

[permalink] [raw]
Subject: [PATCH v4 5/5] arm64: dts: meson-g12b-gtking-pro: add initial device-tree

The Shenzen AZW (Beelink) GT-King Pro is based on the Amlogic W400
reference board with an S922X chip.

- 4GB LPDDR4 RAM
- 64GB eMMC storage
- 10/100/1000 Base-T Ethernet
- AP6356S Wireless (802.11 a/b/g/n/ac, BT 4.1)
- HDMI 2.1 video
- Analogue audio output
- 1x RS232 port
- 2x USB 2.0 port
- 2x USB 3.0 ports
- IR receiver
- 1x micro SD card slot
- 1x Power on/off button

Signed-off-by: Christian Hewitt <[email protected]>
---
arch/arm64/boot/dts/amlogic/Makefile | 1 +
.../dts/amlogic/meson-g12b-gtking-pro.dts | 125 ++++++++++++++++++
2 files changed, 126 insertions(+)
create mode 100644 arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts

diff --git a/arch/arm64/boot/dts/amlogic/Makefile b/arch/arm64/boot/dts/amlogic/Makefile
index 8c9e9dfa5da3..5cac4d1d487d 100644
--- a/arch/arm64/boot/dts/amlogic/Makefile
+++ b/arch/arm64/boot/dts/amlogic/Makefile
@@ -4,6 +4,7 @@ dtb-$(CONFIG_ARCH_MESON) += meson-g12a-sei510.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12a-u200.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12a-x96-max.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking.dtb
+dtb-$(CONFIG_ARCH_MESON) += meson-g12b-gtking-pro.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-a311d-khadas-vim3.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-s922x-khadas-vim3.dtb
dtb-$(CONFIG_ARCH_MESON) += meson-g12b-odroid-n2.dtb
diff --git a/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts
new file mode 100644
index 000000000000..f0c56a16af3d
--- /dev/null
+++ b/arch/arm64/boot/dts/amlogic/meson-g12b-gtking-pro.dts
@@ -0,0 +1,125 @@
+// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
+/*
+ * Copyright (c) 2019 BayLibre, SAS
+ * Author: Neil Armstrong <[email protected]>
+ * Copyright (c) 2019 Christian Hewitt <[email protected]>
+ */
+
+/dts-v1/;
+
+#include "meson-g12b-w400.dtsi"
+#include <dt-bindings/sound/meson-g12a-tohdmitx.h>
+
+/ {
+ compatible = "azw,gtking", "amlogic,g12b";
+ model = "Beelink GT-King Pro";
+
+ gpio-keys-polled {
+ compatible = "gpio-keys-polled";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ poll-interval = <100>;
+
+ power-button {
+ label = "power";
+ linux,code = <KEY_POWER>;
+ gpios = <&gpio_ao GPIOAO_3 GPIO_ACTIVE_HIGH>;
+ };
+ };
+
+ leds {
+ compatible = "gpio-leds";
+
+ white {
+ label = "power:white";
+ gpios = <&gpio_ao GPIOAO_11 GPIO_ACTIVE_HIGH>;
+ default-state = "on";
+ };
+ };
+
+ sound {
+ compatible = "amlogic,axg-sound-card";
+ model = "G12B-GTKING-PRO";
+ audio-aux-devs = <&tdmout_b>;
+ audio-routing = "TDMOUT_B IN 0", "FRDDR_A OUT 1",
+ "TDMOUT_B IN 1", "FRDDR_B OUT 1",
+ "TDMOUT_B IN 2", "FRDDR_C OUT 1",
+ "TDM_B Playback", "TDMOUT_B OUT";
+
+ assigned-clocks = <&clkc CLKID_MPLL2>,
+ <&clkc CLKID_MPLL0>,
+ <&clkc CLKID_MPLL1>;
+ assigned-clock-parents = <0>, <0>, <0>;
+ assigned-clock-rates = <294912000>,
+ <270950400>,
+ <393216000>;
+ status = "okay";
+
+ dai-link-0 {
+ sound-dai = <&frddr_a>;
+ };
+
+ dai-link-1 {
+ sound-dai = <&frddr_b>;
+ };
+
+ dai-link-2 {
+ sound-dai = <&frddr_c>;
+ };
+
+ /* 8ch hdmi interface */
+ dai-link-3 {
+ sound-dai = <&tdmif_b>;
+ dai-format = "i2s";
+ dai-tdm-slot-tx-mask-0 = <1 1>;
+ dai-tdm-slot-tx-mask-1 = <1 1>;
+ dai-tdm-slot-tx-mask-2 = <1 1>;
+ dai-tdm-slot-tx-mask-3 = <1 1>;
+ mclk-fs = <256>;
+
+ codec {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_IN_B>;
+ };
+ };
+
+ dai-link-4 {
+ sound-dai = <&tohdmitx TOHDMITX_I2S_OUT>;
+
+ codec {
+ sound-dai = <&hdmi_tx>;
+ };
+ };
+ };
+};
+
+&arb {
+ status = "okay";
+};
+
+&clkc_audio {
+ status = "okay";
+};
+
+&frddr_a {
+ status = "okay";
+};
+
+&frddr_b {
+ status = "okay";
+};
+
+&frddr_c {
+ status = "okay";
+};
+
+&tdmif_b {
+ status = "okay";
+};
+
+&tdmout_b {
+ status = "okay";
+};
+
+&tohdmitx {
+ status = "okay";
+};
--
2.17.1

2020-05-20 23:02:07

by Kevin Hilman

[permalink] [raw]
Subject: Re: [PATCH v4 0/5] arm64: dts: meson: add W400 dtsi and GT-King/Pro devices

On Wed, 20 May 2020 01:43:24 +0000, Christian Hewitt wrote:
> This series combines patch 2 from [1] which converts the existing Ugoos
> AM6 device-tree to a common W400 dtsi and dts, and then reworks the
> Beelink GT-King/GT-King Pro series from [2] to use the dtsi, but this
> time without the offending common audio dtsi approach. I've carried
> forwards acks on bindings from Rob as these did not change.
>
> v4 - rebased against Kevin's v5.8/dt64 branch
>
> [...]

Applied, thanks!

[1/5] arm64: dts: meson: convert ugoos-am6 to common w400 dtsi
commit: 3cb74db9b2561a25701b9024b9d5c0077c43e214
[2/5] dt-bindings: arm: amlogic: add support for the Beelink GT-King
commit: 3a90ef281f852db9900024116e8ea93a49115df9
[3/5] arm64: dts: meson-g12b-gtking: add initial device-tree
commit: c5522ff9c7299f9845df3fd521d51a1ef7617ac7
[4/5] dt-bindings: arm: amlogic: add support for the Beelink GT-King Pro
commit: 8d4b8772296f88e0b6bf5d091ebf25a54e51882c
[5/5] arm64: dts: meson-g12b-gtking-pro: add initial device-tree
commit: 0b928e4e412b1eb9e79e02cf3580b9254d338aae

Best regards,
--
Kevin Hilman <[email protected]>