Convert the i.MX8QXP LPCG binding to DT schema format using json-schema.
Signed-off-by: Anson Huang <[email protected]>
---
.../devicetree/bindings/clock/imx8qxp-lpcg.txt | 51 ---------------
.../devicetree/bindings/clock/imx8qxp-lpcg.yaml | 72 ++++++++++++++++++++++
2 files changed, 72 insertions(+), 51 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/clock/imx8qxp-lpcg.txt
create mode 100644 Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml
diff --git a/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.txt b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.txt
deleted file mode 100644
index 965cfa4..0000000
--- a/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.txt
+++ /dev/null
@@ -1,51 +0,0 @@
-* NXP i.MX8QXP LPCG (Low-Power Clock Gating) Clock bindings
-
-The Low-Power Clock Gate (LPCG) modules contain a local programming
-model to control the clock gates for the peripherals. An LPCG module
-is used to locally gate the clocks for the associated peripheral.
-
-Note:
-This level of clock gating is provided after the clocks are generated
-by the SCU resources and clock controls. Thus even if the clock is
-enabled by these control bits, it might still not be running based
-on the base resource.
-
-Required properties:
-- compatible: Should be one of:
- "fsl,imx8qxp-lpcg-adma",
- "fsl,imx8qxp-lpcg-conn",
- "fsl,imx8qxp-lpcg-dc",
- "fsl,imx8qxp-lpcg-dsp",
- "fsl,imx8qxp-lpcg-gpu",
- "fsl,imx8qxp-lpcg-hsio",
- "fsl,imx8qxp-lpcg-img",
- "fsl,imx8qxp-lpcg-lsio",
- "fsl,imx8qxp-lpcg-vpu"
-- reg: Address and length of the register set
-- #clock-cells: Should be <1>
-
-The clock consumer should specify the desired clock by having the clock
-ID in its "clocks" phandle cell.
-See the full list of clock IDs from:
-include/dt-bindings/clock/imx8qxp-clock.h
-
-Examples:
-
-#include <dt-bindings/clock/imx8qxp-clock.h>
-
-conn_lpcg: clock-controller@5b200000 {
- compatible = "fsl,imx8qxp-lpcg-conn";
- reg = <0x5b200000 0xb0000>;
- #clock-cells = <1>;
-};
-
-usdhc1: mmc@5b010000 {
- compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
- interrupt-parent = <&gic>;
- interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
- reg = <0x5b010000 0x10000>;
- clocks = <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC0_IPG_CLK>,
- <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC0_PER_CLK>,
- <&conn_lpcg IMX8QXP_CONN_LPCG_SDHC0_HCLK>;
- clock-names = "ipg", "per", "ahb";
-};
diff --git a/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml
new file mode 100644
index 0000000..d5b6825
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml
@@ -0,0 +1,72 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/imx8qxp-lpcg.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: NXP i.MX8QXP LPCG (Low-Power Clock Gating) Clock bindings
+
+maintainers:
+ - Aisheng Dong <[email protected]>
+
+description: |
+ The Low-Power Clock Gate (LPCG) modules contain a local programming
+ model to control the clock gates for the peripherals. An LPCG module
+ is used to locally gate the clocks for the associated peripheral.
+
+ This level of clock gating is provided after the clocks are generated
+ by the SCU resources and clock controls. Thus even if the clock is
+ enabled by these control bits, it might still not be running based
+ on the base resource.
+
+ The clock consumer should specify the desired clock by having the clock
+ ID in its "clocks" phandle cell. See the full list of clock IDs from:
+ include/dt-bindings/clock/imx8-clock.h
+
+properties:
+ compatible:
+ enum:
+ - fsl,imx8qxp-lpcg-adma
+ - fsl,imx8qxp-lpcg-conn
+ - fsl,imx8qxp-lpcg-dc
+ - fsl,imx8qxp-lpcg-dsp
+ - fsl,imx8qxp-lpcg-gpu
+ - fsl,imx8qxp-lpcg-hsio
+ - fsl,imx8qxp-lpcg-img
+ - fsl,imx8qxp-lpcg-lsio
+ - fsl,imx8qxp-lpcg-vpu
+
+ reg:
+ maxItems: 1
+
+ '#clock-cells':
+ const: 1
+
+required:
+ - compatible
+ - reg
+ - '#clock-cells'
+
+examples:
+ - |
+ #include <dt-bindings/clock/imx8-clock.h>
+ #include <dt-bindings/firmware/imx/rsrc.h>
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ clock-controller@5b200000 {
+ compatible = "fsl,imx8qxp-lpcg-conn";
+ reg = <0x5b200000 0xb0000>;
+ #clock-cells = <1>;
+ };
+
+ mmc@5b010000 {
+ compatible = "fsl,imx8qxp-usdhc", "fsl,imx7d-usdhc";
+ interrupts = <GIC_SPI 232 IRQ_TYPE_LEVEL_HIGH>;
+ reg = <0x5b010000 0x10000>;
+ clocks = <&conn_lpcg IMX_CONN_LPCG_SDHC0_IPG_CLK>,
+ <&conn_lpcg IMX_CONN_LPCG_SDHC0_PER_CLK>,
+ <&conn_lpcg IMX_CONN_LPCG_SDHC0_HCLK>;
+ clock-names = "ipg", "per", "ahb";
+ power-domains = <&pd IMX_SC_R_SDHC_0>;
+ status = "disabled";
+ };
--
2.7.4
On Fri, 29 May 2020 14:21:39 +0800, Anson Huang wrote:
> Convert the i.MX8QXP LPCG binding to DT schema format using json-schema.
>
> Signed-off-by: Anson Huang <[email protected]>
> ---
> .../devicetree/bindings/clock/imx8qxp-lpcg.txt | 51 ---------------
> .../devicetree/bindings/clock/imx8qxp-lpcg.yaml | 72 ++++++++++++++++++++++
> 2 files changed, 72 insertions(+), 51 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/clock/imx8qxp-lpcg.txt
> create mode 100644 Documentation/devicetree/bindings/clock/imx8qxp-lpcg.yaml
>
Applied, thanks!