Last series[1] was to add basic infrastructure support for more than
one watchpoint on Book3S powerpc. This series actually enables the 2nd
DAWR for baremetal and powervm. Kvm guest is still not supported. This
series depends on Alistair's "Base support for POWER10"[2] series.
[1]: https://lore.kernel.org/linuxppc-dev/[email protected]/
[2]: https://lore.kernel.org/linuxppc-dev/[email protected]
Ravi Bangoria (7):
powerpc/watchpoint: Enable watchpoint functionality on power10 guest
powerpc/dt_cpu_ftrs: Add feature for 2nd DAWR
powerpc/watchpoint: Set CPU_FTR_DAWR1 based on pa-features bit
powerpc/watchpoint: Rename current H_SET_MODE DAWR macro
powerpc/watchpoint: Guest support for 2nd DAWR hcall
powerpc/watchpoint: Return available watchpoints dynamically
powerpc/watchpoint: Remove 512 byte boundary
arch/powerpc/include/asm/cputable.h | 13 +++++++++----
arch/powerpc/include/asm/hvcall.h | 3 ++-
arch/powerpc/include/asm/hw_breakpoint.h | 5 +++--
arch/powerpc/include/asm/machdep.h | 2 +-
arch/powerpc/include/asm/plpar_wrappers.h | 7 ++++++-
arch/powerpc/kernel/dawr.c | 2 +-
arch/powerpc/kernel/dt_cpu_ftrs.c | 7 +++++++
arch/powerpc/kernel/hw_breakpoint.c | 5 +++--
arch/powerpc/kernel/prom.c | 2 ++
arch/powerpc/kvm/book3s_hv.c | 2 +-
arch/powerpc/platforms/pseries/setup.c | 7 +++++--
11 files changed, 40 insertions(+), 15 deletions(-)
--
2.26.2
CPU_FTR_DAWR is by default enabled for host via CPU_FTRS_DT_CPU_BASE
(controlled by CONFIG_PPC_DT_CPU_FTRS). But cpu-features device-tree
node is not PAPR compatible and thus not yet used by kvm or pHyp
guests. Enable watchpoint functionality on power10 guest (both kvm
and powervm) by adding CPU_FTR_DAWR to CPU_FTRS_POWER10. Note that
this change does not enable 2nd DAWR support yet.
Signed-off-by: Ravi Bangoria <[email protected]>
---
arch/powerpc/include/asm/cputable.h | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h
index bac2252c839e..e506d429b1af 100644
--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@@ -478,7 +478,7 @@ static inline void cpu_feature_keys_init(void) { }
CPU_FTR_CFAR | CPU_FTR_HVMODE | CPU_FTR_VMX_COPY | \
CPU_FTR_DBELL | CPU_FTR_HAS_PPR | CPU_FTR_ARCH_207S | \
CPU_FTR_TM_COMP | CPU_FTR_ARCH_300 | CPU_FTR_PKEY | \
- CPU_FTR_ARCH_31)
+ CPU_FTR_ARCH_31 | CPU_FTR_DAWR)
#define CPU_FTRS_CELL (CPU_FTR_LWSYNC | \
CPU_FTR_PPCAS_ARCH_V2 | CPU_FTR_CTRL | \
CPU_FTR_ALTIVEC_COMP | CPU_FTR_MMCRA | CPU_FTR_SMT | \
--
2.26.2
bit 0 of byte 64 in pa-features property indicates availability of 2nd
DAWR registers. i.e. If this bit is set, 2nd DAWR is present, otherwise
not. Host generally uses "cpu-features", which masks "pa-features". But
"cpu-features" are still not used for guests and thus this change is
mostly applicable for guests only.
Signed-off-by: Ravi Bangoria <[email protected]>
---
arch/powerpc/kernel/prom.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 1dcf0e214a22..6de59de579f7 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -175,6 +175,8 @@ static struct ibm_pa_feature {
*/
{ .pabyte = 22, .pabit = 0, .cpu_features = CPU_FTR_TM_COMP,
.cpu_user_ftrs2 = PPC_FEATURE2_HTM_COMP | PPC_FEATURE2_HTM_NOSC_COMP },
+
+ { .pabyte = 64, .pabit = 0, .cpu_features = CPU_FTR_DAWR1 },
};
static void __init scan_features(unsigned long node, const unsigned char *ftrs,
--
2.26.2
Current H_SET_MODE hcall macro name for setting/resetting DAWR0 is
H_SET_MODE_RESOURCE_SET_DAWR. Add suffix 0 to macro name as well.
Signed-off-by: Ravi Bangoria <[email protected]>
---
arch/powerpc/include/asm/hvcall.h | 2 +-
arch/powerpc/include/asm/plpar_wrappers.h | 2 +-
arch/powerpc/kvm/book3s_hv.c | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h
index e90c073e437e..a7f6f1aeda6b 100644
--- a/arch/powerpc/include/asm/hvcall.h
+++ b/arch/powerpc/include/asm/hvcall.h
@@ -354,7 +354,7 @@
/* Values for 2nd argument to H_SET_MODE */
#define H_SET_MODE_RESOURCE_SET_CIABR 1
-#define H_SET_MODE_RESOURCE_SET_DAWR 2
+#define H_SET_MODE_RESOURCE_SET_DAWR0 2
#define H_SET_MODE_RESOURCE_ADDR_TRANS_MODE 3
#define H_SET_MODE_RESOURCE_LE 4
diff --git a/arch/powerpc/include/asm/plpar_wrappers.h b/arch/powerpc/include/asm/plpar_wrappers.h
index 4497c8afb573..93eb133d572c 100644
--- a/arch/powerpc/include/asm/plpar_wrappers.h
+++ b/arch/powerpc/include/asm/plpar_wrappers.h
@@ -312,7 +312,7 @@ static inline long plpar_set_ciabr(unsigned long ciabr)
static inline long plpar_set_watchpoint0(unsigned long dawr0, unsigned long dawrx0)
{
- return plpar_set_mode(0, H_SET_MODE_RESOURCE_SET_DAWR, dawr0, dawrx0);
+ return plpar_set_mode(0, H_SET_MODE_RESOURCE_SET_DAWR0, dawr0, dawrx0);
}
static inline long plpar_signal_sys_reset(long cpu)
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index a0cf17597838..26820b7bd75c 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -766,7 +766,7 @@ static int kvmppc_h_set_mode(struct kvm_vcpu *vcpu, unsigned long mflags,
return H_P3;
vcpu->arch.ciabr = value1;
return H_SUCCESS;
- case H_SET_MODE_RESOURCE_SET_DAWR:
+ case H_SET_MODE_RESOURCE_SET_DAWR0:
if (!kvmppc_power8_compatible(vcpu))
return H_P2;
if (!ppc_breakpoint_available())
--
2.26.2
2nd DAWR can be set/unset using H_SET_MODE hcall with resource value 5.
Enable powervm guest support with that. This has no effect on kvm guest
because kvm will return error if guest does hcall with resource value 5.
Signed-off-by: Ravi Bangoria <[email protected]>
---
arch/powerpc/include/asm/hvcall.h | 1 +
arch/powerpc/include/asm/machdep.h | 2 +-
arch/powerpc/include/asm/plpar_wrappers.h | 5 +++++
arch/powerpc/kernel/dawr.c | 2 +-
arch/powerpc/platforms/pseries/setup.c | 7 +++++--
5 files changed, 13 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h
index a7f6f1aeda6b..3f170b9496a1 100644
--- a/arch/powerpc/include/asm/hvcall.h
+++ b/arch/powerpc/include/asm/hvcall.h
@@ -357,6 +357,7 @@
#define H_SET_MODE_RESOURCE_SET_DAWR0 2
#define H_SET_MODE_RESOURCE_ADDR_TRANS_MODE 3
#define H_SET_MODE_RESOURCE_LE 4
+#define H_SET_MODE_RESOURCE_SET_DAWR1 5
/* Values for argument to H_SIGNAL_SYS_RESET */
#define H_SIGNAL_SYS_RESET_ALL -1
diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h
index 7bcb64444a39..a90b892f0bfe 100644
--- a/arch/powerpc/include/asm/machdep.h
+++ b/arch/powerpc/include/asm/machdep.h
@@ -131,7 +131,7 @@ struct machdep_calls {
unsigned long dabrx);
/* Set DAWR for this platform, leave empty for default implementation */
- int (*set_dawr)(unsigned long dawr,
+ int (*set_dawr)(int nr, unsigned long dawr,
unsigned long dawrx);
#ifdef CONFIG_PPC32 /* XXX for now */
diff --git a/arch/powerpc/include/asm/plpar_wrappers.h b/arch/powerpc/include/asm/plpar_wrappers.h
index 93eb133d572c..d7a1acc83593 100644
--- a/arch/powerpc/include/asm/plpar_wrappers.h
+++ b/arch/powerpc/include/asm/plpar_wrappers.h
@@ -315,6 +315,11 @@ static inline long plpar_set_watchpoint0(unsigned long dawr0, unsigned long dawr
return plpar_set_mode(0, H_SET_MODE_RESOURCE_SET_DAWR0, dawr0, dawrx0);
}
+static inline long plpar_set_watchpoint1(unsigned long dawr1, unsigned long dawrx1)
+{
+ return plpar_set_mode(0, H_SET_MODE_RESOURCE_SET_DAWR1, dawr1, dawrx1);
+}
+
static inline long plpar_signal_sys_reset(long cpu)
{
return plpar_hcall_norets(H_SIGNAL_SYS_RESET, cpu);
diff --git a/arch/powerpc/kernel/dawr.c b/arch/powerpc/kernel/dawr.c
index 500f52fa4711..cdc2dccb987d 100644
--- a/arch/powerpc/kernel/dawr.c
+++ b/arch/powerpc/kernel/dawr.c
@@ -37,7 +37,7 @@ int set_dawr(int nr, struct arch_hw_breakpoint *brk)
dawrx |= (mrd & 0x3f) << (63 - 53);
if (ppc_md.set_dawr)
- return ppc_md.set_dawr(dawr, dawrx);
+ return ppc_md.set_dawr(nr, dawr, dawrx);
if (nr == 0) {
mtspr(SPRN_DAWR0, dawr);
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 64d18f4bf093..b001cde1a2d7 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -832,12 +832,15 @@ static int pseries_set_xdabr(unsigned long dabr, unsigned long dabrx)
return plpar_hcall_norets(H_SET_XDABR, dabr, dabrx);
}
-static int pseries_set_dawr(unsigned long dawr, unsigned long dawrx)
+static int pseries_set_dawr(int nr, unsigned long dawr, unsigned long dawrx)
{
/* PAPR says we can't set HYP */
dawrx &= ~DAWRX_HYP;
- return plpar_set_watchpoint0(dawr, dawrx);
+ if (nr == 0)
+ return plpar_set_watchpoint0(dawr, dawrx);
+ else
+ return plpar_set_watchpoint1(dawr, dawrx);
}
#define CMO_CHARACTERISTICS_TOKEN 44
--
2.26.2
Power10 has removed 512 bytes boundary from match criteria. i.e. The match
range can be 512 bytes unaligned as well.
Signed-off-by: Ravi Bangoria <[email protected]>
---
arch/powerpc/kernel/hw_breakpoint.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/kernel/hw_breakpoint.c b/arch/powerpc/kernel/hw_breakpoint.c
index 0000daf0e1da..270e655108f4 100644
--- a/arch/powerpc/kernel/hw_breakpoint.c
+++ b/arch/powerpc/kernel/hw_breakpoint.c
@@ -418,8 +418,9 @@ static int hw_breakpoint_validate_len(struct arch_hw_breakpoint *hw)
if (dawr_enabled()) {
max_len = DAWR_MAX_LEN;
- /* DAWR region can't cross 512 bytes boundary */
- if (ALIGN(start_addr, SZ_512M) != ALIGN(end_addr - 1, SZ_512M))
+ /* DAWR region can't cross 512 bytes boundary on p8 and p9 */
+ if (!cpu_has_feature(CPU_FTR_ARCH_31) &&
+ (ALIGN(start_addr, SZ_512M) != ALIGN(end_addr - 1, SZ_512M)))
return -EINVAL;
} else if (IS_ENABLED(CONFIG_PPC_8xx)) {
/* 8xx can setup a range without limitation */
--
2.26.2
So far Book3S Powerpc supported only one watchpoint. But Power10 is
introducing 2nd DAWR. Enable 2nd DAWR support for Power10. Availability
of 2nd DAWR will depend on CPU_FTR_DAWR1.
Signed-off-by: Ravi Bangoria <[email protected]>
---
arch/powerpc/include/asm/cputable.h | 4 +++-
arch/powerpc/include/asm/hw_breakpoint.h | 5 +++--
2 files changed, 6 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h
index 3445c86e1f6f..f110f70a11bf 100644
--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@@ -633,7 +633,9 @@ enum {
* Maximum number of hw breakpoint supported on powerpc. Number of
* breakpoints supported by actual hw might be less than this.
*/
-#define HBP_NUM_MAX 1
+#define HBP_NUM_MAX 2
+#define HBP_NUM_P7_TO_P9 1
+#define HBP_NUM_P10 2
#endif /* !__ASSEMBLY__ */
diff --git a/arch/powerpc/include/asm/hw_breakpoint.h b/arch/powerpc/include/asm/hw_breakpoint.h
index f42a55eb77d2..0365a137d6e8 100644
--- a/arch/powerpc/include/asm/hw_breakpoint.h
+++ b/arch/powerpc/include/asm/hw_breakpoint.h
@@ -5,10 +5,11 @@
* Copyright 2010, IBM Corporation.
* Author: K.Prasad <[email protected]>
*/
-
#ifndef _PPC_BOOK3S_64_HW_BREAKPOINT_H
#define _PPC_BOOK3S_64_HW_BREAKPOINT_H
+#include <asm/cpu_has_feature.h>
+
#ifdef __KERNEL__
struct arch_hw_breakpoint {
unsigned long address;
@@ -46,7 +47,7 @@ struct arch_hw_breakpoint {
static inline int nr_wp_slots(void)
{
- return HBP_NUM_MAX;
+ return cpu_has_feature(CPU_FTR_DAWR1) ? HBP_NUM_P10 : HBP_NUM_P7_TO_P9;
}
#ifdef CONFIG_HAVE_HW_BREAKPOINT
--
2.26.2