Hi Linus,
Here is the power-supply pull request. As mentioned in my
pull request for 5.7, this time there are lots of changes.
Quite a few changes to the core, lots of driver changes
and one change to kobject core (with Ack from Greg). Please
find the details in the signed tag (or below).
No merge conflicts have been reported from linux-next.
-- Sebastian
The following changes since commit 0e698dfa282211e414076f9dc7e83c1c288314fd:
Linux 5.7-rc4 (2020-05-03 14:56:04 -0700)
are available in the Git repository at:
ssh://[email protected]/pub/scm/linux/kernel/git/sre/linux-power-supply.git tags/for-v5.8
for you to fetch changes up to 152204dbdcee6df9406f87c81f9591aeaf1ba55b:
power: supply: cw2015: Attach OF ID table to the driver (2020-06-06 01:13:56 +0200)
----------------------------------------------------------------
power supply and reset changes for the v5.8 series
kobject:
* Increase number of allowed uevent variables
power-supply core:
* Add power-supply type in uevent
* Cleanup property handling in core
* Make property and usb_type pointers const
* Convert core power-supply DT binding to YAML
* Cleanup HWMON code
* Add new health status "calibration required"
* Add new properties for manufacture date and
capacity error margin
battery drivers:
* new cw2015 battery driver used by pine64 Pinebook Pro laptop
* axp22: blacklist on Meegopad T02
* sc27xx: support current/voltage reading
* max17042: support time-to-empty reading
* simple-battery: add more battery parameters
* bq27xxx: convert DT binding document to YAML
* sbs-battery: add TI BQ20Z65 support, fix technology property, convert
DT binding to YAML, add option to disable charger
broadcasts, add new properties: manufacture date,
capacity error margin, average current, charge current
and voltage and support calibration required health
status
* misc. fixes
charger drivers:
* bq25890: cleanup, implement charge type, precharge current and input
current limiting properties
* bd70528: use new linear range helper library
* bd99954: new charger driver
* mp2629: new charger driver
* misc. fixes
reboot drivers:
* oxnas-restart: introduce new driver
* syscon-reboot: convert DT binding to YAML, add parent syscon device support
* misc. fixes
----------------------------------------------------------------
Andy Shevchenko (1):
power: supply: cw2015: Attach OF ID table to the driver
ChenTao (1):
power: supply: cw2015: Make some symbols static
Christophe JAILLET (1):
power: supply: lp8788: Fix an error handling path in 'lp8788_charger_probe()'
Dan Carpenter (1):
power: bq25890: unlock on error paths in bq25890_resume()
Dan Murphy (2):
dt-bindings: power: Convert power_supply text to yaml
dt-bindings: power: Convert bq27xxx dt to yaml
Daniel Golle (1):
power: reset: introduce oxnas-restart
David Heidelberg (1):
power: supply: smb347-charger: Add delay before getting IRQSTAT
Dmitry Osipenko (1):
power: supply: smb347-charger: IRQSTAT_D is volatile
Enric Balletbo i Serra (1):
power: supply: bq24257_charger: Replace depends on REGMAP_I2C with select
Geordan Neukum (1):
power: supply: max17042_battery: Add support for the TTE_NOW prop
Hongbo Yao (1):
power: reset: ltc2952: remove unused variable
Jason Yan (2):
power: supply: max14656: remove set but not used 'ret'
power: supply: ab8500_fg: remove comparison to bool
Jean-Francois Dagenais (1):
power: supply: sbs-battery: add ability to disable charger broadcasts
Jonathan Bakker (1):
power: supply: max17040: Correct voltage reading
Kejia Hu (1):
power: reset: qcom-pon: reg write mask depends on pon generation
Lubomir Rintel (1):
power: supply: olpc_battery: fix the power supply name
Luca Ceresoli (1):
power: reset: gpio-poweroff: add missing '
' in dev_err()
Marek Szyprowski (1):
power: charger: max14577: Add proper dt-compatible strings
Mathew King (4):
power: supply: core: Cleanup power supply sysfs attribute list
power: supply: core: Use designated initializer for property text arrays
power: supply: core: Add a macro that maps enum properties to text values
power: supply: core: Add type property to uevent env
Matti Vaittinen (11):
lib: add linear ranges helpers
lib/test_linear_ranges: add a test for the 'linear_ranges'
power: supply: bd70528: rename linear_range to avoid collision
regulator: use linear_ranges helper
power: supply: bd70528: use linear ranges
dt-bindings: battery: add new battery parameters
power: supply: add battery parameters
dt_bindings: ROHM BD99954 Charger
power: supply: Support ROHM bd99954 charger
power: supply: Fix Kconfig help text indentiation
power: supply: KConfig cleanup default n
Michał Mirosław (16):
power: supply: core: reduce power_supply_show_usb_type() parameters
power: supply: core: allow to constify property lists
power: supply: core: fix HWMON temperature labels
power: supply: core: hide unused HWMON labels
power: charger-manager: clarify num_properties starting value
power: supply: core: tabularize HWMON temperature labels
power: bq25890: simplify chip name property getter
power: bq25890: make property table const
power: bq25890: remove redundant I2C bus check
power: bq25890: protect view of the chip's state
power: bq25890: use proper CURRENT_NOW property for I_BAT
power: bq25890: fix ADC mode configuration
power: bq25890: update state on property read
power: bq25890: implement CHARGE_TYPE property
power: bq25890: implement PRECHARGE_CURRENT property
power: bq25890: implement INPUT_CURRENT_LIMIT property
Qiushi Wu (1):
power: supply: core: fix memory leak in HWMON error path
Rafael Gandolfi (1):
power: supply: axp288_fuel_gauge: Add the Meegopad T02 to the blacklist.
Samuel Zou (1):
power: supply: Make bd9995x_chip_reset static
Saravanan Sekar (6):
dt-bindings: mfd: Add document bindings for mp2629
mfd: mp2629: Add support for mps battery charger
iio: adc: mp2629: Add support for mp2629 ADC driver
power: supply: Add support for mps mp2629 battery charger
power: supply: mp2629: Add impedance compensation config
MAINTAINERS: Add entry for mp2629 Battery Charger driver
Sebastian Reichel (24):
power: supply: charger-manager: Prepare for const properties
power: supply: generic-adc-battery: Prepare for const properties
Merge tag 'tags/linear-ranges-lib' into psy-next
Merge tag 'tags/ib-mfd-iio-power-v5.8' into psy-next
kobject: increase allowed number of uevent variables
power: supply: core: add capacity error margin property
power: supply: core: add manufacture date properties
power: supply: core: add POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED
power: supply: sbs-battery: Add TI BQ20Z65 support
power: supply: sbs-battery: add POWER_SUPPLY_PROP_CAPACITY_ERROR_MARGIN support
power: supply: sbs-battery: simplify read_read_string_data
power: supply: sbs-battery: add PEC support
power: supply: sbs-battery: add POWER_SUPPLY_PROP_CURRENT_AVG support
power: supply: sbs-battery: Improve POWER_SUPPLY_PROP_TECHNOLOGY support
power: supply: sbs-battery: add POWER_SUPPLY_PROP_CONSTANT_CHARGE_CURRENT/VOLTAGE_MAX support
power: supply: sbs-battery: add MANUFACTURE_DATE support
power: supply: sbs-battery: add POWER_SUPPLY_HEALTH_CALIBRATION_REQUIRED support
power: supply: sbs-battery: fix idle battery status
power: supply: sbs-battery: switch from of_property_* to device_property_*
power: supply: sbs-battery: switch to i2c's probe_new
power: supply: sbs-battery: constify power-supply property array
dt-bindings: power: sbs-battery: Convert to yaml
Revert "power: supply: sbs-battery: add PEC support"
Revert "power: supply: sbs-battery: simplify read_read_string_data"
Serge Semin (3):
dt-bindings: power: reset: Convert syscon-reboot-mode to DT schema
dt-bindings: power: reset: Unrequire regmap property in syscon-reboot node
power: reset: syscon-reboot: Add parental syscon support
Tang Bin (2):
power: supply: 88pm860x_battery: remove redundant dev_err message
power: supply: axp288_charger: Omit superfluous error message
Tobias Schramm (3):
dt-bindings: Document cellwise vendor-prefix
dt-bindings: power: supply: add cw2015_battery bindings
power: supply: add CellWise cw2015 fuel gauge driver
Wolfram Sang (1):
power: supply: bq24190_charger: convert to use i2c_new_client_device()
Yuanjiang Yu (4):
power: supply: sc27xx: Set 'no_thermal' flag for SC27xx fuel gauge
power: supply: sc27xx: Allow to change the battery full capacity
power: supply: sc27xx: Add CURRENT_NOW/VOLTAGE_NOW properties support
power: supply: sc27xx: Add boot voltage support
Documentation/ABI/testing/sysfs-class-power | 45 +-
Documentation/ABI/testing/sysfs-class-power-mp2629 | 8 +
.../devicetree/bindings/mfd/mps,mp2629.yaml | 62 ++
.../bindings/power/reset/syscon-reboot-mode.txt | 35 -
.../bindings/power/reset/syscon-reboot-mode.yaml | 55 +
.../bindings/power/reset/syscon-reboot.yaml | 15 +-
.../devicetree/bindings/power/supply/battery.txt | 6 +
.../devicetree/bindings/power/supply/bq27xxx.txt | 56 -
.../devicetree/bindings/power/supply/bq27xxx.yaml | 91 ++
.../bindings/power/supply/cw2015_battery.yaml | 82 ++
.../bindings/power/supply/power-supply.yaml | 40 +
.../bindings/power/supply/power_supply.txt | 25 +-
.../bindings/power/supply/rohm,bd99954.yaml | 155 +++
.../bindings/power/supply/sbs,sbs-battery.yaml | 83 ++
.../bindings/power/supply/sbs_sbs-battery.txt | 27 -
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
MAINTAINERS | 12 +
arch/x86/platform/olpc/olpc-xo1-sci.c | 4 +-
arch/x86/platform/olpc/olpc-xo15-sci.c | 4 +-
drivers/iio/adc/Kconfig | 10 +
drivers/iio/adc/Makefile | 1 +
drivers/iio/adc/mp2629_adc.c | 208 ++++
drivers/mfd/Kconfig | 9 +
drivers/mfd/Makefile | 2 +
drivers/mfd/mp2629.c | 79 ++
drivers/platform/olpc/olpc-xo175-ec.c | 4 +-
drivers/power/reset/Kconfig | 7 +
drivers/power/reset/Makefile | 1 +
drivers/power/reset/gpio-poweroff.c | 2 +-
drivers/power/reset/ltc2952-poweroff.c | 3 +-
drivers/power/reset/oxnas-restart.c | 233 ++++
drivers/power/reset/qcom-pon.c | 3 +-
drivers/power/reset/syscon-reboot.c | 7 +-
drivers/power/supply/88pm860x_battery.c | 8 +-
drivers/power/supply/Kconfig | 59 +-
drivers/power/supply/Makefile | 3 +
drivers/power/supply/ab8500_fg.c | 2 +-
drivers/power/supply/axp288_charger.c | 5 +-
drivers/power/supply/axp288_fuel_gauge.c | 6 +
drivers/power/supply/bd70528-charger.c | 140 +--
drivers/power/supply/bd99954-charger.c | 1142 ++++++++++++++++++++
drivers/power/supply/bd99954-charger.h | 1075 ++++++++++++++++++
drivers/power/supply/bq24190_charger.c | 2 +-
drivers/power/supply/bq25890_charger.c | 200 ++--
drivers/power/supply/charger-manager.c | 40 +-
drivers/power/supply/cw2015_battery.c | 750 +++++++++++++
drivers/power/supply/generic-adc-battery.c | 22 +-
drivers/power/supply/lp8788-charger.c | 18 +-
drivers/power/supply/max14577_charger.c | 10 +
drivers/power/supply/max14656_charger_detector.c | 5 +-
drivers/power/supply/max17040_battery.c | 2 +-
drivers/power/supply/max17042_battery.c | 8 +
drivers/power/supply/mp2629_charger.c | 669 ++++++++++++
drivers/power/supply/olpc_battery.c | 4 +-
drivers/power/supply/power_supply_core.c | 8 +
drivers/power/supply/power_supply_hwmon.c | 64 +-
drivers/power/supply/power_supply_sysfs.c | 484 +++++----
drivers/power/supply/sbs-battery.c | 232 +++-
drivers/power/supply/sc27xx_fuel_gauge.c | 77 +-
drivers/power/supply/smb347-charger.c | 5 +
drivers/regulator/88pg86x.c | 4 +-
drivers/regulator/88pm800-regulator.c | 4 +-
drivers/regulator/Kconfig | 1 +
drivers/regulator/act8865-regulator.c | 4 +-
drivers/regulator/act8945a-regulator.c | 2 +-
drivers/regulator/arizona-ldo1.c | 2 +-
drivers/regulator/arizona-micsupp.c | 4 +-
drivers/regulator/as3711-regulator.c | 6 +-
drivers/regulator/as3722-regulator.c | 4 +-
drivers/regulator/axp20x-regulator.c | 16 +-
drivers/regulator/bcm590xx-regulator.c | 8 +-
drivers/regulator/bd70528-regulator.c | 8 +-
drivers/regulator/bd71828-regulator.c | 10 +-
drivers/regulator/bd718x7-regulator.c | 26 +-
drivers/regulator/da903x.c | 2 +-
drivers/regulator/helpers.c | 130 +--
drivers/regulator/hi6421-regulator.c | 4 +-
drivers/regulator/lochnagar-regulator.c | 4 +-
drivers/regulator/lp873x-regulator.c | 4 +-
drivers/regulator/lp87565-regulator.c | 2 +-
drivers/regulator/lp8788-buck.c | 2 +-
drivers/regulator/max77650-regulator.c | 2 +-
drivers/regulator/mcp16502.c | 4 +-
drivers/regulator/mp8859.c | 2 +-
drivers/regulator/mt6323-regulator.c | 6 +-
drivers/regulator/mt6358-regulator.c | 8 +-
drivers/regulator/mt6380-regulator.c | 6 +-
drivers/regulator/mt6397-regulator.c | 6 +-
drivers/regulator/palmas-regulator.c | 4 +-
drivers/regulator/qcom-rpmh-regulator.c | 2 +-
drivers/regulator/qcom_rpm-regulator.c | 14 +-
drivers/regulator/qcom_smd-regulator.c | 78 +-
drivers/regulator/rk808-regulator.c | 10 +-
drivers/regulator/s2mps11.c | 14 +-
drivers/regulator/sky81452-regulator.c | 2 +-
drivers/regulator/stpmic1_regulator.c | 18 +-
drivers/regulator/tps65086-regulator.c | 10 +-
drivers/regulator/tps65217-regulator.c | 4 +-
drivers/regulator/tps65218-regulator.c | 6 +-
drivers/regulator/tps65912-regulator.c | 4 +-
drivers/regulator/twl-regulator.c | 4 +-
drivers/regulator/twl6030-regulator.c | 2 +-
drivers/regulator/wm831x-dcdc.c | 2 +-
drivers/regulator/wm831x-ldo.c | 4 +-
drivers/regulator/wm8350-regulator.c | 2 +-
drivers/regulator/wm8400-regulator.c | 2 +-
include/linux/kobject.h | 2 +-
include/linux/linear_range.h | 48 +
include/linux/mfd/mp2629.h | 26 +
include/linux/power_supply.h | 13 +-
include/linux/regulator/driver.h | 27 +-
lib/Kconfig | 3 +
lib/Kconfig.debug | 12 +
lib/Makefile | 2 +
lib/linear_ranges.c | 241 +++++
lib/test_linear_ranges.c | 228 ++++
116 files changed, 6544 insertions(+), 937 deletions(-)
create mode 100644 Documentation/ABI/testing/sysfs-class-power-mp2629
create mode 100644 Documentation/devicetree/bindings/mfd/mps,mp2629.yaml
delete mode 100644 Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.txt
create mode 100644 Documentation/devicetree/bindings/power/reset/syscon-reboot-mode.yaml
delete mode 100644 Documentation/devicetree/bindings/power/supply/bq27xxx.txt
create mode 100644 Documentation/devicetree/bindings/power/supply/bq27xxx.yaml
create mode 100644 Documentation/devicetree/bindings/power/supply/cw2015_battery.yaml
create mode 100644 Documentation/devicetree/bindings/power/supply/power-supply.yaml
create mode 100644 Documentation/devicetree/bindings/power/supply/rohm,bd99954.yaml
create mode 100644 Documentation/devicetree/bindings/power/supply/sbs,sbs-battery.yaml
delete mode 100644 Documentation/devicetree/bindings/power/supply/sbs_sbs-battery.txt
create mode 100644 drivers/iio/adc/mp2629_adc.c
create mode 100644 drivers/mfd/mp2629.c
create mode 100644 drivers/power/reset/oxnas-restart.c
create mode 100644 drivers/power/supply/bd99954-charger.c
create mode 100644 drivers/power/supply/bd99954-charger.h
create mode 100644 drivers/power/supply/cw2015_battery.c
create mode 100644 drivers/power/supply/mp2629_charger.c
create mode 100644 include/linux/linear_range.h
create mode 100644 include/linux/mfd/mp2629.h
create mode 100644 lib/linear_ranges.c
create mode 100644 lib/test_linear_ranges.c
The pull request you sent on Tue, 9 Jun 2020 17:37:56 +0200:
> ssh://[email protected]/pub/scm/linux/kernel/git/sre/linux-power-supply.git tags/for-v5.8
has been merged into torvalds/linux.git:
https://git.kernel.org/torvalds/c/3a2a8751742133a7bbc49b9d1bcbd52e212edff6
Thank you!
--
Deet-doot-dot, I am a bot.
https://korg.wiki.kernel.org/userdoc/prtracker