These patches add header files for bcm63xx-gate clock definitions in order
to be able to use them in bcm63xx-gate controller driver and BMIPS device
trees.
"clk: bcm63xx-gate: add BCM6318 support" is required to correctly apply
these patches.
Álvaro Fernández Rojas (8):
mips: bmips: add BCM3368 clock definitions
mips: bmips: add BCM6318 clock definitions
mips: bmips: add BCM6328 clock definitions
mips: bmips: add BCM6358 clock definitions
mips: bmips: add BCM6362 clock definitions
mips: bmips: add BCM6368 clock definitions
mips: bmips: add BCM63268 clock definitions
clk: bcm63xx-gate: switch to dt-bindings definitions
drivers/clk/bcm/clk-bcm63xx-gate.c | 580 ++++++++++++++++-----
include/dt-bindings/clock/bcm3368-clock.h | 24 +
include/dt-bindings/clock/bcm6318-clock.h | 42 ++
include/dt-bindings/clock/bcm63268-clock.h | 30 ++
include/dt-bindings/clock/bcm6328-clock.h | 19 +
include/dt-bindings/clock/bcm6358-clock.h | 18 +
include/dt-bindings/clock/bcm6362-clock.h | 26 +
include/dt-bindings/clock/bcm6368-clock.h | 24 +
8 files changed, 622 insertions(+), 141 deletions(-)
create mode 100644 include/dt-bindings/clock/bcm3368-clock.h
create mode 100644 include/dt-bindings/clock/bcm6318-clock.h
create mode 100644 include/dt-bindings/clock/bcm63268-clock.h
create mode 100644 include/dt-bindings/clock/bcm6328-clock.h
create mode 100644 include/dt-bindings/clock/bcm6358-clock.h
create mode 100644 include/dt-bindings/clock/bcm6362-clock.h
create mode 100644 include/dt-bindings/clock/bcm6368-clock.h
--
2.27.0
Now that there are header files for each SoC, let's use them in the
bcm63xx-gate controller driver.
Signed-off-by: Álvaro Fernández Rojas <[email protected]>
---
drivers/clk/bcm/clk-bcm63xx-gate.c | 580 ++++++++++++++++++++++-------
1 file changed, 439 insertions(+), 141 deletions(-)
diff --git a/drivers/clk/bcm/clk-bcm63xx-gate.c b/drivers/clk/bcm/clk-bcm63xx-gate.c
index fce6746cc607..8ebc49082374 100644
--- a/drivers/clk/bcm/clk-bcm63xx-gate.c
+++ b/drivers/clk/bcm/clk-bcm63xx-gate.c
@@ -6,6 +6,14 @@
#include <linux/of_device.h>
#include <linux/platform_device.h>
+#include <dt-bindings/clock/bcm3368-clock.h>
+#include <dt-bindings/clock/bcm6318-clock.h>
+#include <dt-bindings/clock/bcm6328-clock.h>
+#include <dt-bindings/clock/bcm6358-clock.h>
+#include <dt-bindings/clock/bcm6362-clock.h>
+#include <dt-bindings/clock/bcm6368-clock.h>
+#include <dt-bindings/clock/bcm63268-clock.h>
+
struct clk_bcm63xx_table_entry {
const char * const name;
u8 bit;
@@ -20,168 +28,458 @@ struct clk_bcm63xx_hw {
};
static const struct clk_bcm63xx_table_entry bcm3368_clocks[] = {
- { .name = "mac", .bit = 3, },
- { .name = "tc", .bit = 5, },
- { .name = "us_top", .bit = 6, },
- { .name = "ds_top", .bit = 7, },
- { .name = "acm", .bit = 8, },
- { .name = "spi", .bit = 9, },
- { .name = "usbs", .bit = 10, },
- { .name = "bmu", .bit = 11, },
- { .name = "pcm", .bit = 12, },
- { .name = "ntp", .bit = 13, },
- { .name = "acp_b", .bit = 14, },
- { .name = "acp_a", .bit = 15, },
- { .name = "emusb", .bit = 17, },
- { .name = "enet0", .bit = 18, },
- { .name = "enet1", .bit = 19, },
- { .name = "usbsu", .bit = 20, },
- { .name = "ephy", .bit = 21, },
- { },
+ {
+ .name = "mac",
+ .bit = BCM3368_CLK_MAC,
+ }, {
+ .name = "tc",
+ .bit = BCM3368_CLK_TC,
+ }, {
+ .name = "us_top",
+ .bit = BCM3368_CLK_US_TOP,
+ }, {
+ .name = "ds_top",
+ .bit = BCM3368_CLK_DS_TOP,
+ }, {
+ .name = "acm",
+ .bit = BCM3368_CLK_ACM,
+ }, {
+ .name = "spi",
+ .bit = BCM3368_CLK_SPI,
+ }, {
+ .name = "usbs",
+ .bit = BCM3368_CLK_USBS,
+ }, {
+ .name = "bmu",
+ .bit = BCM3368_CLK_BMU,
+ }, {
+ .name = "pcm",
+ .bit = BCM3368_CLK_PCM,
+ }, {
+ .name = "ntp",
+ .bit = BCM3368_CLK_NTP,
+ }, {
+ .name = "acp_b",
+ .bit = BCM3368_CLK_ACP_B,
+ }, {
+ .name = "acp_a",
+ .bit = BCM3368_CLK_ACP_A,
+ }, {
+ .name = "emusb",
+ .bit = BCM3368_CLK_EMUSB,
+ }, {
+ .name = "enet0",
+ .bit = BCM3368_CLK_ENET0,
+ }, {
+ .name = "enet1",
+ .bit = BCM3368_CLK_ENET1,
+ }, {
+ .name = "usbsu",
+ .bit = BCM3368_CLK_USBSU,
+ }, {
+ .name = "ephy",
+ .bit = BCM3368_CLK_EPHY,
+ }, {
+ /* sentinel */
+ },
};
static const struct clk_bcm63xx_table_entry bcm6318_clocks[] = {
- { .name = "adsl_asb", .bit = 0, },
- { .name = "usb_asb", .bit = 1, },
- { .name = "mips_asb", .bit = 2, },
- { .name = "pcie_asb", .bit = 3, },
- { .name = "phymips_asb", .bit = 4, },
- { .name = "robosw_asb", .bit = 5, },
- { .name = "sar_asb", .bit = 6, },
- { .name = "sdr_asb", .bit = 7, },
- { .name = "swreg_asb", .bit = 8, },
- { .name = "periph_asb", .bit = 9, },
- { .name = "cpubus160", .bit = 10, },
- { .name = "adsl", .bit = 11, },
- { .name = "sar125", .bit = 12, },
- { .name = "mips", .bit = 13, .flags = CLK_IS_CRITICAL, },
- { .name = "pcie", .bit = 14, },
- { .name = "robosw250", .bit = 16, },
- { .name = "robosw025", .bit = 17, },
- { .name = "sdr", .bit = 19, .flags = CLK_IS_CRITICAL, },
- { .name = "usbd", .bit = 20, },
- { .name = "hsspi", .bit = 25, },
- { .name = "pcie25", .bit = 27, },
- { .name = "phymips", .bit = 28, },
- { .name = "afe", .bit = 29, },
- { .name = "qproc", .bit = 30, },
- { },
+ {
+ .name = "adsl_asb",
+ .bit = BCM6318_CLK_ADSL_ASB,
+ }, {
+ .name = "usb_asb",
+ .bit = BCM6318_CLK_USB_ASB,
+ }, {
+ .name = "mips_asb",
+ .bit = BCM6318_CLK_MIPS_ASB,
+ }, {
+ .name = "pcie_asb",
+ .bit = BCM6318_CLK_PCIE_ASB,
+ }, {
+ .name = "phymips_asb",
+ .bit = BCM6318_CLK_PHYMIPS_ASB,
+ }, {
+ .name = "robosw_asb",
+ .bit = BCM6318_CLK_ROBOSW_ASB,
+ }, {
+ .name = "sar_asb",
+ .bit = BCM6318_CLK_SAR_ASB,
+ }, {
+ .name = "sdr_asb",
+ .bit = BCM6318_CLK_SDR_ASB,
+ }, {
+ .name = "swreg_asb",
+ .bit = BCM6318_CLK_SWREG_ASB,
+ }, {
+ .name = "periph_asb",
+ .bit = BCM6318_CLK_PERIPH_ASB,
+ }, {
+ .name = "cpubus160",
+ .bit = BCM6318_CLK_CPUBUS160,
+ }, {
+ .name = "adsl",
+ .bit = BCM6318_CLK_ADSL,
+ }, {
+ .name = "sar125",
+ .bit = BCM6318_CLK_SAR125,
+ }, {
+ .name = "mips",
+ .bit = BCM6318_CLK_MIPS,
+ .flags = CLK_IS_CRITICAL,
+ }, {
+ .name = "pcie",
+ .bit = BCM6318_CLK_PCIE,
+ }, {
+ .name = "robosw250",
+ .bit = BCM6318_CLK_ROBOSW250,
+ }, {
+ .name = "robosw025",
+ .bit = BCM6318_CLK_ROBOSW025,
+ }, {
+ .name = "sdr",
+ .bit = BCM6318_CLK_SDR,
+ .flags = CLK_IS_CRITICAL,
+ }, {
+ .name = "usbd",
+ .bit = BCM6318_CLK_USBD,
+ }, {
+ .name = "hsspi",
+ .bit = BCM6318_CLK_HSSPI,
+ }, {
+ .name = "pcie25",
+ .bit = BCM6318_CLK_PCIE25,
+ }, {
+ .name = "phymips",
+ .bit = BCM6318_CLK_PHYMIPS,
+ }, {
+ .name = "afe",
+ .bit = BCM6318_CLK_AFE,
+ }, {
+ .name = "qproc",
+ .bit = BCM6318_CLK_QPROC,
+ }, {
+ /* sentinel */
+ },
};
static const struct clk_bcm63xx_table_entry bcm6318_ubus_clocks[] = {
- { .name = "adsl-ubus", .bit = 0, },
- { .name = "arb-ubus", .bit = 1, .flags = CLK_IS_CRITICAL, },
- { .name = "mips-ubus", .bit = 2, .flags = CLK_IS_CRITICAL, },
- { .name = "pcie-ubus", .bit = 3, },
- { .name = "periph-ubus", .bit = 4, .flags = CLK_IS_CRITICAL, },
- { .name = "phymips-ubus", .bit = 5, },
- { .name = "robosw-ubus", .bit = 6, },
- { .name = "sar-ubus", .bit = 7, },
- { .name = "sdr-ubus", .bit = 8, },
- { .name = "usb-ubus", .bit = 9, },
- { },
+ {
+ .name = "adsl-ubus",
+ .bit = BCM6318_UCLK_ADSL,
+ }, {
+ .name = "arb-ubus",
+ .bit = BCM6318_UCLK_ARB,
+ .flags = CLK_IS_CRITICAL,
+ }, {
+ .name = "mips-ubus",
+ .bit = BCM6318_UCLK_MIPS,
+ .flags = CLK_IS_CRITICAL,
+ }, {
+ .name = "pcie-ubus",
+ .bit = BCM6318_UCLK_PCIE,
+ }, {
+ .name = "periph-ubus",
+ .bit = BCM6318_UCLK_PERIPH,
+ .flags = CLK_IS_CRITICAL,
+ }, {
+ .name = "phymips-ubus",
+ .bit = BCM6318_UCLK_PHYMIPS,
+ }, {
+ .name = "robosw-ubus",
+ .bit = BCM6318_UCLK_ROBOSW,
+ }, {
+ .name = "sar-ubus",
+ .bit = BCM6318_UCLK_SAR,
+ }, {
+ .name = "sdr-ubus",
+ .bit = BCM6318_UCLK_SDR,
+ }, {
+ .name = "usb-ubus",
+ .bit = BCM6318_UCLK_USB,
+ }, {
+ /* sentinel */
+ },
};
static const struct clk_bcm63xx_table_entry bcm6328_clocks[] = {
- { .name = "phy_mips", .bit = 0, },
- { .name = "adsl_qproc", .bit = 1, },
- { .name = "adsl_afe", .bit = 2, },
- { .name = "adsl", .bit = 3, },
- { .name = "mips", .bit = 4, .flags = CLK_IS_CRITICAL, },
- { .name = "sar", .bit = 5, },
- { .name = "pcm", .bit = 6, },
- { .name = "usbd", .bit = 7, },
- { .name = "usbh", .bit = 8, },
- { .name = "hsspi", .bit = 9, },
- { .name = "pcie", .bit = 10, },
- { .name = "robosw", .bit = 11, },
- { },
+ {
+ .name = "phy_mips",
+ .bit = BCM6328_CLK_PHYMIPS,
+ }, {
+ .name = "adsl_qproc",
+ .bit = BCM6328_CLK_ADSL_QPROC,
+ }, {
+ .name = "adsl_afe",
+ .bit = BCM6328_CLK_ADSL_AFE,
+ }, {
+ .name = "adsl",
+ .bit = BCM6328_CLK_ADSL,
+ }, {
+ .name = "mips",
+ .bit = BCM6328_CLK_MIPS,
+ .flags = CLK_IS_CRITICAL,
+ }, {
+ .name = "sar",
+ .bit = BCM6328_CLK_SAR,
+ }, {
+ .name = "pcm",
+ .bit = BCM6328_CLK_PCM,
+ }, {
+ .name = "usbd",
+ .bit = BCM6328_CLK_USBD,
+ }, {
+ .name = "usbh",
+ .bit = BCM6328_CLK_USBH,
+ }, {
+ .name = "hsspi",
+ .bit = BCM6328_CLK_HSSPI,
+ }, {
+ .name = "pcie",
+ .bit = BCM6328_CLK_PCIE,
+ }, {
+ .name = "robosw",
+ .bit = BCM6328_CLK_ROBOSW,
+ }, {
+ /* sentinel */
+ },
};
static const struct clk_bcm63xx_table_entry bcm6358_clocks[] = {
- { .name = "enet", .bit = 4, },
- { .name = "adslphy", .bit = 5, },
- { .name = "pcm", .bit = 8, },
- { .name = "spi", .bit = 9, },
- { .name = "usbs", .bit = 10, },
- { .name = "sar", .bit = 11, },
- { .name = "emusb", .bit = 17, },
- { .name = "enet0", .bit = 18, },
- { .name = "enet1", .bit = 19, },
- { .name = "usbsu", .bit = 20, },
- { .name = "ephy", .bit = 21, },
- { },
+ {
+ .name = "enet",
+ .bit = BCM6358_CLK_ENET,
+ }, {
+ .name = "adslphy",
+ .bit = BCM6358_CLK_ADSLPHY,
+ }, {
+ .name = "pcm",
+ .bit = BCM6358_CLK_PCM,
+ }, {
+ .name = "spi",
+ .bit = BCM6358_CLK_SPI,
+ }, {
+ .name = "usbs",
+ .bit = BCM6358_CLK_USBS,
+ }, {
+ .name = "sar",
+ .bit = BCM6358_CLK_SAR,
+ }, {
+ .name = "emusb",
+ .bit = BCM6358_CLK_EMUSB,
+ }, {
+ .name = "enet0",
+ .bit = BCM6358_CLK_ENET0,
+ }, {
+ .name = "enet1",
+ .bit = BCM6358_CLK_ENET1,
+ }, {
+ .name = "usbsu",
+ .bit = BCM6358_CLK_USBSU,
+ }, {
+ .name = "ephy",
+ .bit = BCM6358_CLK_EPHY,
+ }, {
+ /* sentinel */
+ },
};
static const struct clk_bcm63xx_table_entry bcm6362_clocks[] = {
- { .name = "adsl_qproc", .bit = 1, },
- { .name = "adsl_afe", .bit = 2, },
- { .name = "adsl", .bit = 3, },
- { .name = "mips", .bit = 4, .flags = CLK_IS_CRITICAL, },
- { .name = "wlan_ocp", .bit = 5, },
- { .name = "swpkt_usb", .bit = 7, },
- { .name = "swpkt_sar", .bit = 8, },
- { .name = "sar", .bit = 9, },
- { .name = "robosw", .bit = 10, },
- { .name = "pcm", .bit = 11, },
- { .name = "usbd", .bit = 12, },
- { .name = "usbh", .bit = 13, },
- { .name = "ipsec", .bit = 14, },
- { .name = "spi", .bit = 15, },
- { .name = "hsspi", .bit = 16, },
- { .name = "pcie", .bit = 17, },
- { .name = "fap", .bit = 18, },
- { .name = "phymips", .bit = 19, },
- { .name = "nand", .bit = 20, },
- { },
+ {
+ .name = "adsl_qproc",
+ .bit = BCM6362_CLK_ADSL_QPROC,
+ }, {
+ .name = "adsl_afe",
+ .bit = BCM6362_CLK_ADSL_AFE,
+ }, {
+ .name = "adsl",
+ .bit = BCM6362_CLK_ADSL,
+ }, {
+ .name = "mips",
+ .bit = BCM6362_CLK_MIPS,
+ .flags = CLK_IS_CRITICAL,
+ }, {
+ .name = "wlan_ocp",
+ .bit = BCM6362_CLK_WLAN_OCP,
+ }, {
+ .name = "swpkt_usb",
+ .bit = BCM6362_CLK_SWPKT_USB,
+ }, {
+ .name = "swpkt_sar",
+ .bit = BCM6362_CLK_SWPKT_SAR,
+ }, {
+ .name = "sar",
+ .bit = BCM6362_CLK_SAR,
+ }, {
+ .name = "robosw",
+ .bit = BCM6362_CLK_ROBOSW,
+ }, {
+ .name = "pcm",
+ .bit = BCM6362_CLK_PCM,
+ }, {
+ .name = "usbd",
+ .bit = BCM6362_CLK_USBD,
+ }, {
+ .name = "usbh",
+ .bit = BCM6362_CLK_USBH,
+ }, {
+ .name = "ipsec",
+ .bit = BCM6362_CLK_IPSEC,
+ }, {
+ .name = "spi",
+ .bit = BCM6362_CLK_SPI,
+ }, {
+ .name = "hsspi",
+ .bit = BCM6362_CLK_HSSPI,
+ }, {
+ .name = "pcie",
+ .bit = BCM6362_CLK_PCIE,
+ }, {
+ .name = "fap",
+ .bit = BCM6362_CLK_FAP,
+ }, {
+ .name = "phymips",
+ .bit = BCM6362_CLK_PHYMIPS,
+ }, {
+ .name = "nand",
+ .bit = BCM6362_CLK_NAND,
+ }, {
+ /* sentinel */
+ },
};
static const struct clk_bcm63xx_table_entry bcm6368_clocks[] = {
- { .name = "vdsl_qproc", .bit = 2, },
- { .name = "vdsl_afe", .bit = 3, },
- { .name = "vdsl_bonding", .bit = 4, },
- { .name = "vdsl", .bit = 5, },
- { .name = "phymips", .bit = 6, },
- { .name = "swpkt_usb", .bit = 7, },
- { .name = "swpkt_sar", .bit = 8, },
- { .name = "spi", .bit = 9, },
- { .name = "usbd", .bit = 10, },
- { .name = "sar", .bit = 11, },
- { .name = "robosw", .bit = 12, },
- { .name = "utopia", .bit = 13, },
- { .name = "pcm", .bit = 14, },
- { .name = "usbh", .bit = 15, },
- { .name = "disable_gless", .bit = 16, },
- { .name = "nand", .bit = 17, },
- { .name = "ipsec", .bit = 18, },
- { },
+ {
+ .name = "vdsl_qproc",
+ .bit = BCM6368_CLK_VDSL_QPROC,
+ }, {
+ .name = "vdsl_afe",
+ .bit = BCM6368_CLK_VDSL_AFE,
+ }, {
+ .name = "vdsl_bonding",
+ .bit = BCM6368_CLK_VDSL_BONDING,
+ }, {
+ .name = "vdsl",
+ .bit = BCM6368_CLK_VDSL,
+ }, {
+ .name = "phymips",
+ .bit = BCM6368_CLK_PHYMIPS,
+ }, {
+ .name = "swpkt_usb",
+ .bit = BCM6368_CLK_SWPKT_USB,
+ }, {
+ .name = "swpkt_sar",
+ .bit = BCM6368_CLK_SWPKT_SAR,
+ }, {
+ .name = "spi",
+ .bit = BCM6368_CLK_SPI,
+ }, {
+ .name = "usbd",
+ .bit = BCM6368_CLK_USBD,
+ }, {
+ .name = "sar",
+ .bit = BCM6368_CLK_SAR,
+ }, {
+ .name = "robosw",
+ .bit = BCM6368_CLK_ROBOSW,
+ }, {
+ .name = "utopia",
+ .bit = BCM6368_CLK_UTOPIA,
+ }, {
+ .name = "pcm",
+ .bit = BCM6368_CLK_PCM,
+ }, {
+ .name = "usbh",
+ .bit = BCM6368_CLK_USBH,
+ }, {
+ .name = "disable_gless",
+ .bit = BCM6368_CLK_DIS_GLESS,
+ }, {
+ .name = "nand",
+ .bit = BCM6368_CLK_NAND,
+ }, {
+ .name = "ipsec",
+ .bit = BCM6368_CLK_IPSEC,
+ }, {
+ /* sentinel */
+ },
};
static const struct clk_bcm63xx_table_entry bcm63268_clocks[] = {
- { .name = "disable_gless", .bit = 0, },
- { .name = "vdsl_qproc", .bit = 1, },
- { .name = "vdsl_afe", .bit = 2, },
- { .name = "vdsl", .bit = 3, },
- { .name = "mips", .bit = 4, .flags = CLK_IS_CRITICAL, },
- { .name = "wlan_ocp", .bit = 5, },
- { .name = "dect", .bit = 6, },
- { .name = "fap0", .bit = 7, },
- { .name = "fap1", .bit = 8, },
- { .name = "sar", .bit = 9, },
- { .name = "robosw", .bit = 10, },
- { .name = "pcm", .bit = 11, },
- { .name = "usbd", .bit = 12, },
- { .name = "usbh", .bit = 13, },
- { .name = "ipsec", .bit = 14, },
- { .name = "spi", .bit = 15, },
- { .name = "hsspi", .bit = 16, },
- { .name = "pcie", .bit = 17, },
- { .name = "phymips", .bit = 18, },
- { .name = "gmac", .bit = 19, },
- { .name = "nand", .bit = 20, },
- { .name = "tbus", .bit = 27, },
- { .name = "robosw250", .bit = 31, },
- { },
+ {
+ .name = "disable_gless",
+ .bit = BCM63268_CLK_DIS_GLESS,
+ }, {
+ .name = "vdsl_qproc",
+ .bit = BCM63268_CLK_VDSL_QPROC,
+ }, {
+ .name = "vdsl_afe",
+ .bit = BCM63268_CLK_VDSL_AFE,
+ }, {
+ .name = "vdsl",
+ .bit = BCM63268_CLK_VDSL,
+ }, {
+ .name = "mips",
+ .bit = BCM63268_CLK_MIPS,
+ .flags = CLK_IS_CRITICAL,
+ }, {
+ .name = "wlan_ocp",
+ .bit = BCM63268_CLK_WLAN_OCP,
+ }, {
+ .name = "dect",
+ .bit = BCM63268_CLK_DECT,
+ }, {
+ .name = "fap0",
+ .bit = BCM63268_CLK_FAP0,
+ }, {
+ .name = "fap1",
+ .bit = BCM63268_CLK_FAP1,
+ }, {
+ .name = "sar",
+ .bit = BCM63268_CLK_SAR,
+ }, {
+ .name = "robosw",
+ .bit = BCM63268_CLK_ROBOSW,
+ }, {
+ .name = "pcm",
+ .bit = BCM63268_CLK_PCM,
+ }, {
+ .name = "usbd",
+ .bit = BCM63268_CLK_USBD,
+ }, {
+ .name = "usbh",
+ .bit = BCM63268_CLK_USBH,
+ }, {
+ .name = "ipsec",
+ .bit = BCM63268_CLK_IPSEC,
+ }, {
+ .name = "spi",
+ .bit = BCM63268_CLK_SPI,
+ }, {
+ .name = "hsspi",
+ .bit = BCM63268_CLK_HSSPI,
+ }, {
+ .name = "pcie",
+ .bit = BCM63268_CLK_PCIE,
+ }, {
+ .name = "phymips",
+ .bit = BCM63268_CLK_PHYMIPS,
+ }, {
+ .name = "gmac",
+ .bit = BCM63268_CLK_GMAC,
+ }, {
+ .name = "nand",
+ .bit = BCM63268_CLK_NAND,
+ }, {
+ .name = "tbus",
+ .bit = BCM63268_CLK_TBUS,
+ }, {
+ .name = "robosw250",
+ .bit = BCM63268_CLK_ROBOSW250,
+ }, {
+ /* sentinel */
+ },
};
static int clk_bcm63xx_probe(struct platform_device *pdev)
--
2.27.0
Add header with BCM63268 definitions in order to be able to include it from
device tree files.
Signed-off-by: Álvaro Fernández Rojas <[email protected]>
---
include/dt-bindings/clock/bcm63268-clock.h | 30 ++++++++++++++++++++++
1 file changed, 30 insertions(+)
create mode 100644 include/dt-bindings/clock/bcm63268-clock.h
diff --git a/include/dt-bindings/clock/bcm63268-clock.h b/include/dt-bindings/clock/bcm63268-clock.h
new file mode 100644
index 000000000000..da23e691d359
--- /dev/null
+++ b/include/dt-bindings/clock/bcm63268-clock.h
@@ -0,0 +1,30 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef __DT_BINDINGS_CLOCK_BCM63268_H
+#define __DT_BINDINGS_CLOCK_BCM63268_H
+
+#define BCM63268_CLK_DIS_GLESS 0
+#define BCM63268_CLK_VDSL_QPROC 1
+#define BCM63268_CLK_VDSL_AFE 2
+#define BCM63268_CLK_VDSL 3
+#define BCM63268_CLK_MIPS 4
+#define BCM63268_CLK_WLAN_OCP 5
+#define BCM63268_CLK_DECT 6
+#define BCM63268_CLK_FAP0 7
+#define BCM63268_CLK_FAP1 8
+#define BCM63268_CLK_SAR 9
+#define BCM63268_CLK_ROBOSW 10
+#define BCM63268_CLK_PCM 11
+#define BCM63268_CLK_USBD 12
+#define BCM63268_CLK_USBH 13
+#define BCM63268_CLK_IPSEC 14
+#define BCM63268_CLK_SPI 15
+#define BCM63268_CLK_HSSPI 16
+#define BCM63268_CLK_PCIE 17
+#define BCM63268_CLK_PHYMIPS 18
+#define BCM63268_CLK_GMAC 19
+#define BCM63268_CLK_NAND 20
+#define BCM63268_CLK_TBUS 27
+#define BCM63268_CLK_ROBOSW250 31
+
+#endif /* __DT_BINDINGS_CLOCK_BCM63268_H */
--
2.27.0
Add header with BCM6328 definitions in order to be able to include it from
device tree files.
Signed-off-by: Álvaro Fernández Rojas <[email protected]>
---
include/dt-bindings/clock/bcm6328-clock.h | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
create mode 100644 include/dt-bindings/clock/bcm6328-clock.h
diff --git a/include/dt-bindings/clock/bcm6328-clock.h b/include/dt-bindings/clock/bcm6328-clock.h
new file mode 100644
index 000000000000..1f6a3103f3dc
--- /dev/null
+++ b/include/dt-bindings/clock/bcm6328-clock.h
@@ -0,0 +1,19 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef __DT_BINDINGS_CLOCK_BCM6328_H
+#define __DT_BINDINGS_CLOCK_BCM6328_H
+
+#define BCM6328_CLK_PHYMIPS 0
+#define BCM6328_CLK_ADSL_QPROC 1
+#define BCM6328_CLK_ADSL_AFE 2
+#define BCM6328_CLK_ADSL 3
+#define BCM6328_CLK_MIPS 4
+#define BCM6328_CLK_SAR 5
+#define BCM6328_CLK_PCM 6
+#define BCM6328_CLK_USBD 7
+#define BCM6328_CLK_USBH 8
+#define BCM6328_CLK_HSSPI 9
+#define BCM6328_CLK_PCIE 10
+#define BCM6328_CLK_ROBOSW 11
+
+#endif /* __DT_BINDINGS_CLOCK_BCM6328_H */
--
2.27.0
Add header with BCM3368 definitions in order to be able to include it from
device tree files.
Signed-off-by: Álvaro Fernández Rojas <[email protected]>
---
include/dt-bindings/clock/bcm3368-clock.h | 24 +++++++++++++++++++++++
1 file changed, 24 insertions(+)
create mode 100644 include/dt-bindings/clock/bcm3368-clock.h
diff --git a/include/dt-bindings/clock/bcm3368-clock.h b/include/dt-bindings/clock/bcm3368-clock.h
new file mode 100644
index 000000000000..74a7382f77b8
--- /dev/null
+++ b/include/dt-bindings/clock/bcm3368-clock.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef __DT_BINDINGS_CLOCK_BCM3368_H
+#define __DT_BINDINGS_CLOCK_BCM3368_H
+
+#define BCM3368_CLK_MAC 3
+#define BCM3368_CLK_TC 5
+#define BCM3368_CLK_US_TOP 6
+#define BCM3368_CLK_DS_TOP 7
+#define BCM3368_CLK_ACM 8
+#define BCM3368_CLK_SPI 9
+#define BCM3368_CLK_USBS 10
+#define BCM3368_CLK_BMU 11
+#define BCM3368_CLK_PCM 12
+#define BCM3368_CLK_NTP 13
+#define BCM3368_CLK_ACP_B 14
+#define BCM3368_CLK_ACP_A 15
+#define BCM3368_CLK_EMUSB 17
+#define BCM3368_CLK_ENET0 18
+#define BCM3368_CLK_ENET1 19
+#define BCM3368_CLK_USBSU 20
+#define BCM3368_CLK_EPHY 21
+
+#endif /* __DT_BINDINGS_CLOCK_BCM3368_H */
--
2.27.0
Add header with BCM6368 definitions in order to be able to include it from
device tree files.
Signed-off-by: Álvaro Fernández Rojas <[email protected]>
---
include/dt-bindings/clock/bcm6368-clock.h | 24 +++++++++++++++++++++++
1 file changed, 24 insertions(+)
create mode 100644 include/dt-bindings/clock/bcm6368-clock.h
diff --git a/include/dt-bindings/clock/bcm6368-clock.h b/include/dt-bindings/clock/bcm6368-clock.h
new file mode 100644
index 000000000000..f161d5333883
--- /dev/null
+++ b/include/dt-bindings/clock/bcm6368-clock.h
@@ -0,0 +1,24 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef __DT_BINDINGS_CLOCK_BCM6368_H
+#define __DT_BINDINGS_CLOCK_BCM6368_H
+
+#define BCM6368_CLK_VDSL_QPROC 2
+#define BCM6368_CLK_VDSL_AFE 3
+#define BCM6368_CLK_VDSL_BONDING 4
+#define BCM6368_CLK_VDSL 5
+#define BCM6368_CLK_PHYMIPS 6
+#define BCM6368_CLK_SWPKT_USB 7
+#define BCM6368_CLK_SWPKT_SAR 8
+#define BCM6368_CLK_SPI 9
+#define BCM6368_CLK_USBD 10
+#define BCM6368_CLK_SAR 11
+#define BCM6368_CLK_ROBOSW 12
+#define BCM6368_CLK_UTOPIA 13
+#define BCM6368_CLK_PCM 14
+#define BCM6368_CLK_USBH 15
+#define BCM6368_CLK_DIS_GLESS 16
+#define BCM6368_CLK_NAND 17
+#define BCM6368_CLK_IPSEC 18
+
+#endif /* __DT_BINDINGS_CLOCK_BCM6368_H */
--
2.27.0
Add header with BCM6362 definitions in order to be able to include it from
device tree files.
Signed-off-by: Álvaro Fernández Rojas <[email protected]>
---
include/dt-bindings/clock/bcm6362-clock.h | 26 +++++++++++++++++++++++
1 file changed, 26 insertions(+)
create mode 100644 include/dt-bindings/clock/bcm6362-clock.h
diff --git a/include/dt-bindings/clock/bcm6362-clock.h b/include/dt-bindings/clock/bcm6362-clock.h
new file mode 100644
index 000000000000..17655cd5bf25
--- /dev/null
+++ b/include/dt-bindings/clock/bcm6362-clock.h
@@ -0,0 +1,26 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef __DT_BINDINGS_CLOCK_BCM6362_H
+#define __DT_BINDINGS_CLOCK_BCM6362_H
+
+#define BCM6362_CLK_ADSL_QPROC 1
+#define BCM6362_CLK_ADSL_AFE 2
+#define BCM6362_CLK_ADSL 3
+#define BCM6362_CLK_MIPS 4
+#define BCM6362_CLK_WLAN_OCP 5
+#define BCM6362_CLK_SWPKT_USB 7
+#define BCM6362_CLK_SWPKT_SAR 8
+#define BCM6362_CLK_SAR 9
+#define BCM6362_CLK_ROBOSW 10
+#define BCM6362_CLK_PCM 11
+#define BCM6362_CLK_USBD 12
+#define BCM6362_CLK_USBH 13
+#define BCM6362_CLK_IPSEC 14
+#define BCM6362_CLK_SPI 15
+#define BCM6362_CLK_HSSPI 16
+#define BCM6362_CLK_PCIE 17
+#define BCM6362_CLK_FAP 18
+#define BCM6362_CLK_PHYMIPS 19
+#define BCM6362_CLK_NAND 20
+
+#endif /* __DT_BINDINGS_CLOCK_BCM6362_H */
--
2.27.0
Add header with BCM6358 definitions in order to be able to include it from
device tree files.
Signed-off-by: Álvaro Fernández Rojas <[email protected]>
---
include/dt-bindings/clock/bcm6358-clock.h | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
create mode 100644 include/dt-bindings/clock/bcm6358-clock.h
diff --git a/include/dt-bindings/clock/bcm6358-clock.h b/include/dt-bindings/clock/bcm6358-clock.h
new file mode 100644
index 000000000000..980c9cac4765
--- /dev/null
+++ b/include/dt-bindings/clock/bcm6358-clock.h
@@ -0,0 +1,18 @@
+/* SPDX-License-Identifier: GPL-2.0+ */
+
+#ifndef __DT_BINDINGS_CLOCK_BCM6358_H
+#define __DT_BINDINGS_CLOCK_BCM6358_H
+
+#define BCM6358_CLK_ENET 4
+#define BCM6358_CLK_ADSLPHY 5
+#define BCM6358_CLK_PCM 8
+#define BCM6358_CLK_SPI 9
+#define BCM6358_CLK_USBS 10
+#define BCM6358_CLK_SAR 11
+#define BCM6358_CLK_EMUSB 17
+#define BCM6358_CLK_ENET0 18
+#define BCM6358_CLK_ENET1 19
+#define BCM6358_CLK_USBSU 20
+#define BCM6358_CLK_EPHY 21
+
+#endif /* __DT_BINDINGS_CLOCK_BCM6358_H */
--
2.27.0
On 6/15/2020 2:02 AM, Álvaro Fernández Rojas wrote:
> Add header with BCM3368 definitions in order to be able to include it from
> device tree files.
>
> Signed-off-by: Álvaro Fernández Rojas <[email protected]>
Acked-by: Florian Fainelli <[email protected]>
--
Florian
On 6/15/2020 2:02 AM, Álvaro Fernández Rojas wrote:
> Add header with BCM6358 definitions in order to be able to include it from
> device tree files.
>
> Signed-off-by: Álvaro Fernández Rojas <[email protected]>
Acked-by: Florian Fainelli <[email protected]>
--
Florian
On 6/15/2020 2:02 AM, Álvaro Fernández Rojas wrote:
> Add header with BCM6362 definitions in order to be able to include it from
> device tree files.
>
> Signed-off-by: Álvaro Fernández Rojas <[email protected]>
Acked-by: Florian Fainelli <[email protected]>
--
Florian
On 6/15/2020 2:02 AM, Álvaro Fernández Rojas wrote:
> Add header with BCM63268 definitions in order to be able to include it from
> device tree files.
>
> Signed-off-by: Álvaro Fernández Rojas <[email protected]>
Acked-by: Florian Fainelli <[email protected]>
--
Florian
On 6/15/2020 2:02 AM, Álvaro Fernández Rojas wrote:
> Now that there are header files for each SoC, let's use them in the
> bcm63xx-gate controller driver.
>
> Signed-off-by: Álvaro Fernández Rojas <[email protected]>
Acked-by: Florian Fainelli <[email protected]>
--
Florian
On 6/15/2020 2:02 AM, Álvaro Fernández Rojas wrote:
> Add header with BCM6328 definitions in order to be able to include it from
> device tree files.
>
> Signed-off-by: Álvaro Fernández Rojas <[email protected]>
Acked-by: Florian Fainelli <[email protected]>
--
Florian
On 6/15/2020 2:02 AM, Álvaro Fernández Rojas wrote:
> Add header with BCM6368 definitions in order to be able to include it from
> device tree files.
>
> Signed-off-by: Álvaro Fernández Rojas <[email protected]>
Acked-by: Florian Fainelli <[email protected]>
--
Florian