A ";" is missing in the pwrseq dt examples, fix them.
Signed-off-by: Jisheng Zhang <[email protected]>
---
Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.txt | 2 +-
Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.txt | 2 +-
Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.txt b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.txt
index 3d965d57e00b..c4fb06bf0bc2 100644
--- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.txt
+++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-emmc.txt
@@ -22,4 +22,4 @@ Example:
sdhci0_pwrseq {
compatible = "mmc-pwrseq-emmc";
reset-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
- }
+ };
diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.txt b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.txt
index 22e9340e4ba2..8204374546e1 100644
--- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.txt
+++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-sd8787.txt
@@ -13,4 +13,4 @@ Example:
compatible = "mmc-pwrseq-sd8787";
powerdown-gpios = <&twl_gpio 0 GPIO_ACTIVE_LOW>;
reset-gpios = <&twl_gpio 1 GPIO_ACTIVE_LOW>;
- }
+ };
diff --git a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt
index 9029b45b8a22..bcbe8e947459 100644
--- a/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt
+++ b/Documentation/devicetree/bindings/mmc/mmc-pwrseq-simple.txt
@@ -28,4 +28,4 @@ Example:
reset-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>;
clocks = <&clk_32768_ck>;
clock-names = "ext_clock";
- }
+ };
--
2.27.0