2020-05-26 11:01:48

by David Stevens

[permalink] [raw]
Subject: [PATCH v4 0/3] Support virtio cross-device resources

This patchset implements the current proposal for virtio cross-device
resource sharing [1]. It will be used to import virtio resources into
the virtio-video driver currently under discussion [2]. The patch
under consideration to add support in the virtio-video driver is [3].
It uses the APIs from v3 of this series, but the changes to update it
are relatively minor.

This patchset adds a new flavor of dma-bufs that supports querying the
underlying virtio object UUID, as well as adding support for exporting
resources from virtgpu.

[1] https://markmail.org/thread/2ypjt5cfeu3m6lxu
[2] https://markmail.org/thread/p5d3k566srtdtute
[3] https://markmail.org/thread/j4xlqaaim266qpks

v3 -> v4 changes:
- Replace dma-buf hooks with virtio dma-buf from v1.
- Remove virtio_attach callback, as the work that had been done
in that callback is now done on dma-buf export. The documented
requirement that get_uuid only be called on attached virtio
dma-bufs is also removed.
- Rebase and add call to virtio_gpu_notify for ASSIGN_UUID.

David Stevens (3):
virtio: add dma-buf support for exported objects
virtio-gpu: add VIRTIO_GPU_F_RESOURCE_UUID feature
drm/virtio: Support virtgpu exported resources

drivers/gpu/drm/virtio/virtgpu_drv.c | 3 +
drivers/gpu/drm/virtio/virtgpu_drv.h | 20 ++++++
drivers/gpu/drm/virtio/virtgpu_kms.c | 4 ++
drivers/gpu/drm/virtio/virtgpu_prime.c | 98 +++++++++++++++++++++++++-
drivers/gpu/drm/virtio/virtgpu_vq.c | 55 +++++++++++++++
drivers/virtio/Makefile | 2 +-
drivers/virtio/virtio.c | 6 ++
drivers/virtio/virtio_dma_buf.c | 91 ++++++++++++++++++++++++
include/linux/virtio.h | 1 +
include/linux/virtio_dma_buf.h | 58 +++++++++++++++
include/uapi/linux/virtio_gpu.h | 19 +++++
11 files changed, 353 insertions(+), 4 deletions(-)
create mode 100644 drivers/virtio/virtio_dma_buf.c
create mode 100644 include/linux/virtio_dma_buf.h

--
2.27.0.rc0.183.gde8f92d652-goog


2020-05-26 11:01:53

by David Stevens

[permalink] [raw]
Subject: [PATCH v4 1/3] virtio: add dma-buf support for exported objects

This change adds a new flavor of dma-bufs that can be used by virtio
drivers to share exported objects. A virtio dma-buf can be queried by
virtio drivers to obtain the UUID which identifies the underlying
exported object.

Signed-off-by: David Stevens <[email protected]>
---
drivers/virtio/Makefile | 2 +-
drivers/virtio/virtio.c | 6 +++
drivers/virtio/virtio_dma_buf.c | 89 +++++++++++++++++++++++++++++++++
include/linux/virtio.h | 1 +
include/linux/virtio_dma_buf.h | 58 +++++++++++++++++++++
5 files changed, 155 insertions(+), 1 deletion(-)
create mode 100644 drivers/virtio/virtio_dma_buf.c
create mode 100644 include/linux/virtio_dma_buf.h

diff --git a/drivers/virtio/Makefile b/drivers/virtio/Makefile
index 29a1386ecc03..ecdae5b596de 100644
--- a/drivers/virtio/Makefile
+++ b/drivers/virtio/Makefile
@@ -1,5 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
-obj-$(CONFIG_VIRTIO) += virtio.o virtio_ring.o
+obj-$(CONFIG_VIRTIO) += virtio.o virtio_ring.o virtio_dma_buf.o
obj-$(CONFIG_VIRTIO_MMIO) += virtio_mmio.o
obj-$(CONFIG_VIRTIO_PCI) += virtio_pci.o
virtio_pci-y := virtio_pci_modern.o virtio_pci_common.o
diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c
index a977e32a88f2..5d46f0ded92d 100644
--- a/drivers/virtio/virtio.c
+++ b/drivers/virtio/virtio.c
@@ -357,6 +357,12 @@ int register_virtio_device(struct virtio_device *dev)
}
EXPORT_SYMBOL_GPL(register_virtio_device);

+bool is_virtio_device(struct device *dev)
+{
+ return dev->bus == &virtio_bus;
+}
+EXPORT_SYMBOL_GPL(is_virtio_device);
+
void unregister_virtio_device(struct virtio_device *dev)
{
int index = dev->index; /* save for after device release */
diff --git a/drivers/virtio/virtio_dma_buf.c b/drivers/virtio/virtio_dma_buf.c
new file mode 100644
index 000000000000..23e3399b11ed
--- /dev/null
+++ b/drivers/virtio/virtio_dma_buf.c
@@ -0,0 +1,89 @@
+// SPDX-License-Identifier: GPL-2.0-or-later
+/*
+ * dma-bufs for virtio exported objects
+ *
+ * Copyright (C) 2020 Google, Inc.
+ */
+
+#include <linux/virtio_dma_buf.h>
+
+/**
+ * virtio_dma_buf_export - Creates a new dma-buf for a virtio exported object
+ *
+ * This wraps dma_buf_export() to allow virtio drivers to create a dma-buf
+ * for an virtio exported object that can be queried by other virtio drivers
+ * for the object's UUID.
+ */
+struct dma_buf *virtio_dma_buf_export(
+ const struct virtio_dma_buf_export_info *virtio_exp_info)
+{
+ struct dma_buf_export_info exp_info;
+
+ if (!virtio_exp_info->ops
+ || virtio_exp_info->ops->ops.attach != &virtio_dma_buf_attach
+ || !virtio_exp_info->ops->get_uuid) {
+ return ERR_PTR(-EINVAL);
+ }
+
+ exp_info.exp_name = virtio_exp_info->exp_name;
+ exp_info.owner = virtio_exp_info->owner;
+ exp_info.ops = &virtio_exp_info->ops->ops;
+ exp_info.size = virtio_exp_info->size;
+ exp_info.flags = virtio_exp_info->flags;
+ exp_info.resv = virtio_exp_info->resv;
+ exp_info.priv = virtio_exp_info->priv;
+ BUILD_BUG_ON(sizeof(struct virtio_dma_buf_export_info)
+ != sizeof(struct dma_buf_export_info));
+
+ return dma_buf_export(&exp_info);
+}
+EXPORT_SYMBOL(virtio_dma_buf_export);
+
+/**
+ * virtio_dma_buf_attach - mandatory attach callback for virtio dma-bufs
+ */
+int virtio_dma_buf_attach(struct dma_buf *dma_buf,
+ struct dma_buf_attachment *attach)
+{
+ int ret;
+ const struct virtio_dma_buf_ops *ops = container_of(
+ dma_buf->ops, const struct virtio_dma_buf_ops, ops);
+
+ if (ops->device_attach) {
+ ret = ops->device_attach(dma_buf, attach);
+ if (ret)
+ return ret;
+ }
+ return 0;
+}
+EXPORT_SYMBOL(virtio_dma_buf_attach);
+
+/**
+ * is_virtio_dma_buf - returns true if the given dma-buf is a virtio dma-buf
+ * @dma_buf: buffer to query
+ */
+bool is_virtio_dma_buf(struct dma_buf *dma_buf)
+{
+ return dma_buf->ops->attach == &virtio_dma_buf_attach;
+}
+EXPORT_SYMBOL(is_virtio_dma_buf);
+
+/**
+ * virtio_dma_buf_get_uuid - gets the uuid of the virtio dma-buf's exported object
+ * @dma_buf: [in] buffer to query
+ * @uuid: [out] the uuid
+ *
+ * Returns: 0 on success, negative on failure.
+ */
+int virtio_dma_buf_get_uuid(struct dma_buf *dma_buf,
+ uuid_t *uuid)
+{
+ const struct virtio_dma_buf_ops *ops = container_of(
+ dma_buf->ops, const struct virtio_dma_buf_ops, ops);
+
+ if (!is_virtio_dma_buf(dma_buf))
+ return -EINVAL;
+
+ return ops->get_uuid(dma_buf, uuid);
+}
+EXPORT_SYMBOL(virtio_dma_buf_get_uuid);
diff --git a/include/linux/virtio.h b/include/linux/virtio.h
index 15f906e4a748..9397e25616c4 100644
--- a/include/linux/virtio.h
+++ b/include/linux/virtio.h
@@ -128,6 +128,7 @@ static inline struct virtio_device *dev_to_virtio(struct device *_dev)
void virtio_add_status(struct virtio_device *dev, unsigned int status);
int register_virtio_device(struct virtio_device *dev);
void unregister_virtio_device(struct virtio_device *dev);
+bool is_virtio_device(struct device *dev);

void virtio_break_device(struct virtio_device *dev);

diff --git a/include/linux/virtio_dma_buf.h b/include/linux/virtio_dma_buf.h
new file mode 100644
index 000000000000..29fee167afbd
--- /dev/null
+++ b/include/linux/virtio_dma_buf.h
@@ -0,0 +1,58 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * dma-bufs for virtio exported objects
+ *
+ * Copyright (C) 2020 Google, Inc.
+ */
+
+#ifndef _LINUX_VIRTIO_DMA_BUF_H
+#define _LINUX_VIRTIO_DMA_BUF_H
+
+#include <linux/dma-buf.h>
+#include <linux/uuid.h>
+#include <linux/virtio.h>
+
+/**
+ * struct virtio_dma_buf_ops - operations possible on exported object dma-buf
+ * @ops: the base dma_buf_ops. ops.attach MUST be virtio_dma_buf_attach.
+ * @device_attach: [optional] callback invoked by virtio_dma_buf_attach during
+ * all attach operations.
+ * @get_uid: [required] callback to get the uuid of the exported object.
+ */
+struct virtio_dma_buf_ops {
+ struct dma_buf_ops ops;
+ int (*device_attach)(struct dma_buf *dma_buf,
+ struct dma_buf_attachment *attach);
+ int (*get_uuid)(struct dma_buf *dma_buf, uuid_t *uuid);
+};
+
+/**
+ * struct virtio_dma_buf_export_info - see struct dma_buf_export_info
+ */
+struct virtio_dma_buf_export_info {
+ const char *exp_name;
+ struct module *owner;
+ const struct virtio_dma_buf_ops *ops;
+ size_t size;
+ int flags;
+ struct dma_resv *resv;
+ void *priv;
+};
+
+/**
+ * DEFINE_VIRTIO_DMA_BUF_EXPORT_INFO - helper macro for exporters
+ */
+#define DEFINE_VIRTIO_DMA_BUF_EXPORT_INFO(name) \
+ struct virtio_dma_buf_export_info name = { \
+ .exp_name = KBUILD_MODNAME, \
+ .owner = THIS_MODULE }
+
+int virtio_dma_buf_attach(struct dma_buf *dma_buf,
+ struct dma_buf_attachment *attach);
+
+struct dma_buf *virtio_dma_buf_export(
+ const struct virtio_dma_buf_export_info *virtio_exp_info);
+bool is_virtio_dma_buf(struct dma_buf *dma_buf);
+int virtio_dma_buf_get_uuid(struct dma_buf *dma_buf, uuid_t *uuid);
+
+#endif /* _LINUX_VIRTIO_DMA_BUF_H */
--
2.27.0.rc0.183.gde8f92d652-goog

2020-05-26 11:02:39

by David Stevens

[permalink] [raw]
Subject: [PATCH v4 2/3] virtio-gpu: add VIRTIO_GPU_F_RESOURCE_UUID feature

This feature allows the guest to request a UUID from the host for a
particular virtio_gpu resource. The UUID can then be shared with other
virtio devices, to allow the other host devices to access the
virtio_gpu's corresponding host resource.

Signed-off-by: David Stevens <[email protected]>
---
include/uapi/linux/virtio_gpu.h | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)

diff --git a/include/uapi/linux/virtio_gpu.h b/include/uapi/linux/virtio_gpu.h
index 0c85914d9369..9721d58b4d58 100644
--- a/include/uapi/linux/virtio_gpu.h
+++ b/include/uapi/linux/virtio_gpu.h
@@ -50,6 +50,10 @@
* VIRTIO_GPU_CMD_GET_EDID
*/
#define VIRTIO_GPU_F_EDID 1
+/*
+ * VIRTIO_GPU_CMD_RESOURCE_ASSIGN_UUID
+ */
+#define VIRTIO_GPU_F_RESOURCE_UUID 2

enum virtio_gpu_ctrl_type {
VIRTIO_GPU_UNDEFINED = 0,
@@ -66,6 +70,7 @@ enum virtio_gpu_ctrl_type {
VIRTIO_GPU_CMD_GET_CAPSET_INFO,
VIRTIO_GPU_CMD_GET_CAPSET,
VIRTIO_GPU_CMD_GET_EDID,
+ VIRTIO_GPU_CMD_RESOURCE_ASSIGN_UUID,

/* 3d commands */
VIRTIO_GPU_CMD_CTX_CREATE = 0x0200,
@@ -87,6 +92,7 @@ enum virtio_gpu_ctrl_type {
VIRTIO_GPU_RESP_OK_CAPSET_INFO,
VIRTIO_GPU_RESP_OK_CAPSET,
VIRTIO_GPU_RESP_OK_EDID,
+ VIRTIO_GPU_RESP_OK_RESOURCE_UUID,

/* error responses */
VIRTIO_GPU_RESP_ERR_UNSPEC = 0x1200,
@@ -340,4 +346,17 @@ enum virtio_gpu_formats {
VIRTIO_GPU_FORMAT_R8G8B8X8_UNORM = 134,
};

+/* VIRTIO_GPU_CMD_RESOURCE_ASSIGN_UUID */
+struct virtio_gpu_resource_assign_uuid {
+ struct virtio_gpu_ctrl_hdr hdr;
+ __le32 resource_id;
+ __le32 padding;
+};
+
+/* VIRTIO_GPU_RESP_OK_RESOURCE_UUID */
+struct virtio_gpu_resp_resource_uuid {
+ struct virtio_gpu_ctrl_hdr hdr;
+ __u8 uuid[16];
+};
+
#endif
--
2.27.0.rc0.183.gde8f92d652-goog

2020-05-26 11:04:13

by David Stevens

[permalink] [raw]
Subject: [PATCH v4 3/3] drm/virtio: Support virtgpu exported resources

Add support for UUID-based resource sharing mechanism to virtgpu. This
implements the new virtgpu commands and hooks them up to dma-buf's
get_uuid callback.

Signed-off-by: David Stevens <[email protected]>
---
drivers/gpu/drm/virtio/virtgpu_drv.c | 3 +
drivers/gpu/drm/virtio/virtgpu_drv.h | 20 ++++++
drivers/gpu/drm/virtio/virtgpu_kms.c | 4 ++
drivers/gpu/drm/virtio/virtgpu_prime.c | 96 +++++++++++++++++++++++++-
drivers/gpu/drm/virtio/virtgpu_vq.c | 55 +++++++++++++++
5 files changed, 175 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/virtio/virtgpu_drv.c b/drivers/gpu/drm/virtio/virtgpu_drv.c
index ab4bed78e656..b039f493bda9 100644
--- a/drivers/gpu/drm/virtio/virtgpu_drv.c
+++ b/drivers/gpu/drm/virtio/virtgpu_drv.c
@@ -165,6 +165,7 @@ static unsigned int features[] = {
VIRTIO_GPU_F_VIRGL,
#endif
VIRTIO_GPU_F_EDID,
+ VIRTIO_GPU_F_RESOURCE_UUID,
};
static struct virtio_driver virtio_gpu_driver = {
.feature_table = features,
@@ -202,6 +203,8 @@ static struct drm_driver driver = {
.prime_handle_to_fd = drm_gem_prime_handle_to_fd,
.prime_fd_to_handle = drm_gem_prime_fd_to_handle,
.gem_prime_mmap = drm_gem_prime_mmap,
+ .gem_prime_export = virtgpu_gem_prime_export,
+ .gem_prime_import = virtgpu_gem_prime_import,
.gem_prime_import_sg_table = virtgpu_gem_prime_import_sg_table,

.gem_create_object = virtio_gpu_create_object,
diff --git a/drivers/gpu/drm/virtio/virtgpu_drv.h b/drivers/gpu/drm/virtio/virtgpu_drv.h
index 49bebdee6d91..39dc907aa805 100644
--- a/drivers/gpu/drm/virtio/virtgpu_drv.h
+++ b/drivers/gpu/drm/virtio/virtgpu_drv.h
@@ -49,6 +49,10 @@
#define DRIVER_MINOR 1
#define DRIVER_PATCHLEVEL 0

+#define UUID_INITIALIZING 0
+#define UUID_INITIALIZED 1
+#define UUID_INITIALIZATION_FAILED 2
+
struct virtio_gpu_object_params {
uint32_t format;
uint32_t width;
@@ -71,6 +75,9 @@ struct virtio_gpu_object {
uint32_t hw_res_handle;
bool dumb;
bool created;
+
+ int uuid_state;
+ uuid_t uuid;
};
#define gem_to_virtio_gpu_obj(gobj) \
container_of((gobj), struct virtio_gpu_object, base.base)
@@ -200,6 +207,7 @@ struct virtio_gpu_device {
bool has_virgl_3d;
bool has_edid;
bool has_indirect;
+ bool has_resource_assign_uuid;

struct work_struct config_changed_work;

@@ -210,6 +218,8 @@ struct virtio_gpu_device {
struct virtio_gpu_drv_capset *capsets;
uint32_t num_capsets;
struct list_head cap_cache;
+
+ spinlock_t resource_export_lock;
};

struct virtio_gpu_fpriv {
@@ -335,6 +345,10 @@ void virtio_gpu_dequeue_fence_func(struct work_struct *work);

void virtio_gpu_notify(struct virtio_gpu_device *vgdev);

+int
+virtio_gpu_cmd_resource_assign_uuid(struct virtio_gpu_device *vgdev,
+ struct virtio_gpu_object_array *objs);
+
/* virtgpu_display.c */
void virtio_gpu_modeset_init(struct virtio_gpu_device *vgdev);
void virtio_gpu_modeset_fini(struct virtio_gpu_device *vgdev);
@@ -366,6 +380,12 @@ int virtio_gpu_object_create(struct virtio_gpu_device *vgdev,
bool virtio_gpu_is_shmem(struct virtio_gpu_object *bo);

/* virtgpu_prime.c */
+struct dma_buf *virtgpu_gem_prime_export(struct drm_gem_object *obj,
+ int flags);
+struct drm_gem_object *virtgpu_gem_prime_import(struct drm_device *dev,
+ struct dma_buf *buf);
+int virtgpu_gem_prime_get_uuid(struct drm_gem_object *obj,
+ uuid_t *uuid);
struct drm_gem_object *virtgpu_gem_prime_import_sg_table(
struct drm_device *dev, struct dma_buf_attachment *attach,
struct sg_table *sgt);
diff --git a/drivers/gpu/drm/virtio/virtgpu_kms.c b/drivers/gpu/drm/virtio/virtgpu_kms.c
index 023a030ca7b9..7bcd0c75effa 100644
--- a/drivers/gpu/drm/virtio/virtgpu_kms.c
+++ b/drivers/gpu/drm/virtio/virtgpu_kms.c
@@ -125,6 +125,7 @@ int virtio_gpu_init(struct drm_device *dev)
vgdev->dev = dev->dev;

spin_lock_init(&vgdev->display_info_lock);
+ spin_lock_init(&vgdev->resource_export_lock);
ida_init(&vgdev->ctx_id_ida);
ida_init(&vgdev->resource_ida);
init_waitqueue_head(&vgdev->resp_wq);
@@ -153,6 +154,9 @@ int virtio_gpu_init(struct drm_device *dev)
if (virtio_has_feature(vgdev->vdev, VIRTIO_RING_F_INDIRECT_DESC)) {
vgdev->has_indirect = true;
}
+ if (virtio_has_feature(vgdev->vdev, VIRTIO_GPU_F_RESOURCE_UUID)) {
+ vgdev->has_resource_assign_uuid = true;
+ }

DRM_INFO("features: %cvirgl %cedid\n",
vgdev->has_virgl_3d ? '+' : '-',
diff --git a/drivers/gpu/drm/virtio/virtgpu_prime.c b/drivers/gpu/drm/virtio/virtgpu_prime.c
index 050d24c39a8f..a753bb70fcf1 100644
--- a/drivers/gpu/drm/virtio/virtgpu_prime.c
+++ b/drivers/gpu/drm/virtio/virtgpu_prime.c
@@ -23,12 +23,102 @@
*/

#include <drm/drm_prime.h>
+#include <linux/virtio_dma_buf.h>

#include "virtgpu_drv.h"

-/* Empty Implementations as there should not be any other driver for a virtual
- * device that might share buffers with virtgpu
- */
+static int virtgpu_virtio_get_uuid(struct dma_buf *buf,
+ uuid_t *uuid)
+{
+ struct drm_gem_object *obj = buf->priv;
+ struct virtio_gpu_object *bo = gem_to_virtio_gpu_obj(obj);
+ struct virtio_gpu_device *vgdev = obj->dev->dev_private;
+
+ wait_event(vgdev->resp_wq, bo->uuid_state != UUID_INITIALIZING);
+ if (bo->uuid_state != UUID_INITIALIZED)
+ return -ENODEV;
+
+ uuid_copy(uuid, &bo->uuid);
+
+ return 0;
+}
+
+const struct virtio_dma_buf_ops virtgpu_dmabuf_ops = {
+ .ops = {
+ .cache_sgt_mapping = true,
+ .attach = virtio_dma_buf_attach,
+ .detach = drm_gem_map_detach,
+ .map_dma_buf = drm_gem_map_dma_buf,
+ .unmap_dma_buf = drm_gem_unmap_dma_buf,
+ .release = drm_gem_dmabuf_release,
+ .mmap = drm_gem_dmabuf_mmap,
+ .vmap = drm_gem_dmabuf_vmap,
+ .vunmap = drm_gem_dmabuf_vunmap,
+ },
+ .device_attach = drm_gem_map_attach,
+ .get_uuid = virtgpu_virtio_get_uuid,
+};
+
+struct dma_buf *virtgpu_gem_prime_export(struct drm_gem_object *obj,
+ int flags)
+{
+ struct dma_buf *buf;
+ struct drm_device *dev = obj->dev;
+ struct virtio_gpu_device *vgdev = dev->dev_private;
+ struct virtio_gpu_object *bo = gem_to_virtio_gpu_obj(obj);
+ struct virtio_gpu_object_array *objs;
+ int ret = 0;
+ DEFINE_VIRTIO_DMA_BUF_EXPORT_INFO(exp_info);
+
+ if (vgdev->has_resource_assign_uuid) {
+ objs = virtio_gpu_array_alloc(1);
+ if (!objs)
+ return ERR_PTR(-ENOMEM);
+ virtio_gpu_array_add_obj(objs, &bo->base.base);
+
+ ret = virtio_gpu_cmd_resource_assign_uuid(vgdev, objs);
+ if (ret)
+ return ERR_PTR(ret);
+ virtio_gpu_notify(vgdev);
+ } else {
+ bo->uuid_state = UUID_INITIALIZATION_FAILED;
+ }
+
+ exp_info.ops = &virtgpu_dmabuf_ops;
+ exp_info.size = obj->size;
+ exp_info.flags = flags;
+ exp_info.priv = obj;
+ exp_info.resv = obj->resv;
+
+ buf = virtio_dma_buf_export(&exp_info);
+ if (IS_ERR(buf))
+ return buf;
+
+ drm_dev_get(dev);
+ drm_gem_object_get(obj);
+
+ return buf;
+}
+
+struct drm_gem_object *virtgpu_gem_prime_import(struct drm_device *dev,
+ struct dma_buf *buf)
+{
+ struct drm_gem_object *obj;
+
+ if (buf->ops == &virtgpu_dmabuf_ops.ops) {
+ obj = buf->priv;
+ if (obj->dev == dev) {
+ /*
+ * Importing dmabuf exported from our own gem increases
+ * refcount on gem itself instead of f_count of dmabuf.
+ */
+ drm_gem_object_get(obj);
+ return obj;
+ }
+ }
+
+ return drm_gem_prime_import(dev, buf);
+}

struct drm_gem_object *virtgpu_gem_prime_import_sg_table(
struct drm_device *dev, struct dma_buf_attachment *attach,
diff --git a/drivers/gpu/drm/virtio/virtgpu_vq.c b/drivers/gpu/drm/virtio/virtgpu_vq.c
index 9e663a5d9952..55af6fc7bc7c 100644
--- a/drivers/gpu/drm/virtio/virtgpu_vq.c
+++ b/drivers/gpu/drm/virtio/virtgpu_vq.c
@@ -1107,3 +1107,58 @@ void virtio_gpu_cursor_ping(struct virtio_gpu_device *vgdev,
memcpy(cur_p, &output->cursor, sizeof(output->cursor));
virtio_gpu_queue_cursor(vgdev, vbuf);
}
+
+static void virtio_gpu_cmd_resource_uuid_cb(struct virtio_gpu_device *vgdev,
+ struct virtio_gpu_vbuffer *vbuf)
+{
+ struct virtio_gpu_object *obj =
+ gem_to_virtio_gpu_obj(vbuf->objs->objs[0]);
+ struct virtio_gpu_resp_resource_uuid *resp =
+ (struct virtio_gpu_resp_resource_uuid *)vbuf->resp_buf;
+ uint32_t resp_type = le32_to_cpu(resp->hdr.type);
+
+ spin_lock(&vgdev->resource_export_lock);
+ WARN_ON(obj->uuid_state != UUID_INITIALIZING);
+
+ if (resp_type == VIRTIO_GPU_RESP_OK_RESOURCE_UUID &&
+ obj->uuid_state == UUID_INITIALIZING) {
+ memcpy(&obj->uuid.b, resp->uuid, sizeof(obj->uuid.b));
+ obj->uuid_state = UUID_INITIALIZED;
+ } else {
+ obj->uuid_state = UUID_INITIALIZATION_FAILED;
+ }
+ spin_unlock(&vgdev->resource_export_lock);
+
+ wake_up_all(&vgdev->resp_wq);
+}
+
+int
+virtio_gpu_cmd_resource_assign_uuid(struct virtio_gpu_device *vgdev,
+ struct virtio_gpu_object_array *objs)
+{
+ struct virtio_gpu_object *bo = gem_to_virtio_gpu_obj(objs->objs[0]);
+ struct virtio_gpu_resource_assign_uuid *cmd_p;
+ struct virtio_gpu_vbuffer *vbuf;
+ struct virtio_gpu_resp_resource_uuid *resp_buf;
+
+ resp_buf = kzalloc(sizeof(*resp_buf), GFP_KERNEL);
+ if (!resp_buf) {
+ spin_lock(&vgdev->resource_export_lock);
+ bo->uuid_state = UUID_INITIALIZATION_FAILED;
+ spin_unlock(&vgdev->resource_export_lock);
+ virtio_gpu_array_put_free(objs);
+ return -ENOMEM;
+ }
+
+ cmd_p = virtio_gpu_alloc_cmd_resp(vgdev,
+ virtio_gpu_cmd_resource_uuid_cb, &vbuf, sizeof(*cmd_p),
+ sizeof(struct virtio_gpu_resp_resource_uuid), resp_buf);
+ memset(cmd_p, 0, sizeof(*cmd_p));
+
+ cmd_p->hdr.type = cpu_to_le32(VIRTIO_GPU_CMD_RESOURCE_ASSIGN_UUID);
+ cmd_p->resource_id = cpu_to_le32(bo->hw_res_handle);
+
+ vbuf->objs = objs;
+ virtio_gpu_queue_ctrl_buffer(vgdev, vbuf);
+ return 0;
+}
--
2.27.0.rc0.183.gde8f92d652-goog

2020-05-28 08:36:00

by Gerd Hoffmann

[permalink] [raw]
Subject: Re: [PATCH v4 0/3] Support virtio cross-device resources

On Tue, May 26, 2020 at 07:58:08PM +0900, David Stevens wrote:
> This patchset implements the current proposal for virtio cross-device
> resource sharing [1]. It will be used to import virtio resources into
> the virtio-video driver currently under discussion [2]. The patch
> under consideration to add support in the virtio-video driver is [3].
> It uses the APIs from v3 of this series, but the changes to update it
> are relatively minor.
>
> This patchset adds a new flavor of dma-bufs that supports querying the
> underlying virtio object UUID, as well as adding support for exporting
> resources from virtgpu.
>
> [1] https://markmail.org/thread/2ypjt5cfeu3m6lxu
> [2] https://markmail.org/thread/p5d3k566srtdtute
> [3] https://markmail.org/thread/j4xlqaaim266qpks
>
> v3 -> v4 changes:
> - Replace dma-buf hooks with virtio dma-buf from v1.
> - Remove virtio_attach callback, as the work that had been done
> in that callback is now done on dma-buf export. The documented
> requirement that get_uuid only be called on attached virtio
> dma-bufs is also removed.
> - Rebase and add call to virtio_gpu_notify for ASSIGN_UUID.
>
> David Stevens (3):
> virtio: add dma-buf support for exported objects
> virtio-gpu: add VIRTIO_GPU_F_RESOURCE_UUID feature
> drm/virtio: Support virtgpu exported resources

Looks all sane to me. mst, have you looked at the virtio core changes?
How we are going to merge this? If you ack I can merge via
drm-misc-next. Merging through virtio queue would be fine too.

thanks,
Gerd

2020-06-04 22:25:22

by Michael S. Tsirkin

[permalink] [raw]
Subject: Re: [PATCH v4 1/3] virtio: add dma-buf support for exported objects

On Tue, May 26, 2020 at 07:58:09PM +0900, David Stevens wrote:
> This change adds a new flavor of dma-bufs that can be used by virtio
> drivers to share exported objects. A virtio dma-buf can be queried by
> virtio drivers to obtain the UUID which identifies the underlying
> exported object.
>
> Signed-off-by: David Stevens <[email protected]>

Is this just for graphics? If yes I'd rather we put it in the graphics
driver. We can always move it later ...

> ---
> drivers/virtio/Makefile | 2 +-
> drivers/virtio/virtio.c | 6 +++
> drivers/virtio/virtio_dma_buf.c | 89 +++++++++++++++++++++++++++++++++
> include/linux/virtio.h | 1 +
> include/linux/virtio_dma_buf.h | 58 +++++++++++++++++++++
> 5 files changed, 155 insertions(+), 1 deletion(-)
> create mode 100644 drivers/virtio/virtio_dma_buf.c
> create mode 100644 include/linux/virtio_dma_buf.h
>
> diff --git a/drivers/virtio/Makefile b/drivers/virtio/Makefile
> index 29a1386ecc03..ecdae5b596de 100644
> --- a/drivers/virtio/Makefile
> +++ b/drivers/virtio/Makefile
> @@ -1,5 +1,5 @@
> # SPDX-License-Identifier: GPL-2.0
> -obj-$(CONFIG_VIRTIO) += virtio.o virtio_ring.o
> +obj-$(CONFIG_VIRTIO) += virtio.o virtio_ring.o virtio_dma_buf.o
> obj-$(CONFIG_VIRTIO_MMIO) += virtio_mmio.o
> obj-$(CONFIG_VIRTIO_PCI) += virtio_pci.o
> virtio_pci-y := virtio_pci_modern.o virtio_pci_common.o
> diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c
> index a977e32a88f2..5d46f0ded92d 100644
> --- a/drivers/virtio/virtio.c
> +++ b/drivers/virtio/virtio.c
> @@ -357,6 +357,12 @@ int register_virtio_device(struct virtio_device *dev)
> }
> EXPORT_SYMBOL_GPL(register_virtio_device);
>
> +bool is_virtio_device(struct device *dev)
> +{
> + return dev->bus == &virtio_bus;
> +}
> +EXPORT_SYMBOL_GPL(is_virtio_device);
> +
> void unregister_virtio_device(struct virtio_device *dev)
> {
> int index = dev->index; /* save for after device release */
> diff --git a/drivers/virtio/virtio_dma_buf.c b/drivers/virtio/virtio_dma_buf.c
> new file mode 100644
> index 000000000000..23e3399b11ed
> --- /dev/null
> +++ b/drivers/virtio/virtio_dma_buf.c
> @@ -0,0 +1,89 @@
> +// SPDX-License-Identifier: GPL-2.0-or-later
> +/*
> + * dma-bufs for virtio exported objects
> + *
> + * Copyright (C) 2020 Google, Inc.
> + */
> +
> +#include <linux/virtio_dma_buf.h>
> +
> +/**
> + * virtio_dma_buf_export - Creates a new dma-buf for a virtio exported object
> + *
> + * This wraps dma_buf_export() to allow virtio drivers to create a dma-buf
> + * for an virtio exported object that can be queried by other virtio drivers
> + * for the object's UUID.
> + */
> +struct dma_buf *virtio_dma_buf_export(
> + const struct virtio_dma_buf_export_info *virtio_exp_info)
> +{
> + struct dma_buf_export_info exp_info;
> +
> + if (!virtio_exp_info->ops
> + || virtio_exp_info->ops->ops.attach != &virtio_dma_buf_attach
> + || !virtio_exp_info->ops->get_uuid) {
> + return ERR_PTR(-EINVAL);
> + }
> +
> + exp_info.exp_name = virtio_exp_info->exp_name;
> + exp_info.owner = virtio_exp_info->owner;
> + exp_info.ops = &virtio_exp_info->ops->ops;
> + exp_info.size = virtio_exp_info->size;
> + exp_info.flags = virtio_exp_info->flags;
> + exp_info.resv = virtio_exp_info->resv;
> + exp_info.priv = virtio_exp_info->priv;
> + BUILD_BUG_ON(sizeof(struct virtio_dma_buf_export_info)
> + != sizeof(struct dma_buf_export_info));

This is the only part that gives me pause. Why do we need this hack?
What's wrong with just using dma_buf_export_info directly,
and if you want the virtio ops, just using container_off?



> +
> + return dma_buf_export(&exp_info);
> +}
> +EXPORT_SYMBOL(virtio_dma_buf_export);
> +
> +/**
> + * virtio_dma_buf_attach - mandatory attach callback for virtio dma-bufs
> + */
> +int virtio_dma_buf_attach(struct dma_buf *dma_buf,
> + struct dma_buf_attachment *attach)
> +{
> + int ret;
> + const struct virtio_dma_buf_ops *ops = container_of(
> + dma_buf->ops, const struct virtio_dma_buf_ops, ops);
> +
> + if (ops->device_attach) {
> + ret = ops->device_attach(dma_buf, attach);
> + if (ret)
> + return ret;
> + }
> + return 0;
> +}
> +EXPORT_SYMBOL(virtio_dma_buf_attach);
> +
> +/**
> + * is_virtio_dma_buf - returns true if the given dma-buf is a virtio dma-buf
> + * @dma_buf: buffer to query
> + */
> +bool is_virtio_dma_buf(struct dma_buf *dma_buf)
> +{
> + return dma_buf->ops->attach == &virtio_dma_buf_attach;
> +}
> +EXPORT_SYMBOL(is_virtio_dma_buf);
> +
> +/**
> + * virtio_dma_buf_get_uuid - gets the uuid of the virtio dma-buf's exported object
> + * @dma_buf: [in] buffer to query
> + * @uuid: [out] the uuid
> + *
> + * Returns: 0 on success, negative on failure.
> + */
> +int virtio_dma_buf_get_uuid(struct dma_buf *dma_buf,
> + uuid_t *uuid)
> +{
> + const struct virtio_dma_buf_ops *ops = container_of(
> + dma_buf->ops, const struct virtio_dma_buf_ops, ops);
> +
> + if (!is_virtio_dma_buf(dma_buf))
> + return -EINVAL;
> +
> + return ops->get_uuid(dma_buf, uuid);
> +}
> +EXPORT_SYMBOL(virtio_dma_buf_get_uuid);
> diff --git a/include/linux/virtio.h b/include/linux/virtio.h
> index 15f906e4a748..9397e25616c4 100644
> --- a/include/linux/virtio.h
> +++ b/include/linux/virtio.h
> @@ -128,6 +128,7 @@ static inline struct virtio_device *dev_to_virtio(struct device *_dev)
> void virtio_add_status(struct virtio_device *dev, unsigned int status);
> int register_virtio_device(struct virtio_device *dev);
> void unregister_virtio_device(struct virtio_device *dev);
> +bool is_virtio_device(struct device *dev);
>
> void virtio_break_device(struct virtio_device *dev);
>
> diff --git a/include/linux/virtio_dma_buf.h b/include/linux/virtio_dma_buf.h
> new file mode 100644
> index 000000000000..29fee167afbd
> --- /dev/null
> +++ b/include/linux/virtio_dma_buf.h
> @@ -0,0 +1,58 @@
> +/* SPDX-License-Identifier: GPL-2.0 */
> +/*
> + * dma-bufs for virtio exported objects
> + *
> + * Copyright (C) 2020 Google, Inc.
> + */
> +
> +#ifndef _LINUX_VIRTIO_DMA_BUF_H
> +#define _LINUX_VIRTIO_DMA_BUF_H
> +
> +#include <linux/dma-buf.h>
> +#include <linux/uuid.h>
> +#include <linux/virtio.h>
> +
> +/**
> + * struct virtio_dma_buf_ops - operations possible on exported object dma-buf
> + * @ops: the base dma_buf_ops. ops.attach MUST be virtio_dma_buf_attach.
> + * @device_attach: [optional] callback invoked by virtio_dma_buf_attach during
> + * all attach operations.
> + * @get_uid: [required] callback to get the uuid of the exported object.
> + */
> +struct virtio_dma_buf_ops {
> + struct dma_buf_ops ops;
> + int (*device_attach)(struct dma_buf *dma_buf,
> + struct dma_buf_attachment *attach);
> + int (*get_uuid)(struct dma_buf *dma_buf, uuid_t *uuid);
> +};
> +
> +/**
> + * struct virtio_dma_buf_export_info - see struct dma_buf_export_info
> + */
> +struct virtio_dma_buf_export_info {
> + const char *exp_name;
> + struct module *owner;
> + const struct virtio_dma_buf_ops *ops;
> + size_t size;
> + int flags;
> + struct dma_resv *resv;
> + void *priv;
> +};
> +
> +/**
> + * DEFINE_VIRTIO_DMA_BUF_EXPORT_INFO - helper macro for exporters
> + */
> +#define DEFINE_VIRTIO_DMA_BUF_EXPORT_INFO(name) \
> + struct virtio_dma_buf_export_info name = { \
> + .exp_name = KBUILD_MODNAME, \
> + .owner = THIS_MODULE }
> +
> +int virtio_dma_buf_attach(struct dma_buf *dma_buf,
> + struct dma_buf_attachment *attach);
> +
> +struct dma_buf *virtio_dma_buf_export(
> + const struct virtio_dma_buf_export_info *virtio_exp_info);
> +bool is_virtio_dma_buf(struct dma_buf *dma_buf);
> +int virtio_dma_buf_get_uuid(struct dma_buf *dma_buf, uuid_t *uuid);
> +
> +#endif /* _LINUX_VIRTIO_DMA_BUF_H */
> --
> 2.27.0.rc0.183.gde8f92d652-goog

2020-06-05 01:33:18

by David Stevens

[permalink] [raw]
Subject: Re: [PATCH v4 1/3] virtio: add dma-buf support for exported objects

On Fri, Jun 5, 2020 at 4:05 AM Michael S. Tsirkin <[email protected]> wrote:
>
> On Tue, May 26, 2020 at 07:58:09PM +0900, David Stevens wrote:
> > This change adds a new flavor of dma-bufs that can be used by virtio
> > drivers to share exported objects. A virtio dma-buf can be queried by
> > virtio drivers to obtain the UUID which identifies the underlying
> > exported object.
> >
> > Signed-off-by: David Stevens <[email protected]>
>
> Is this just for graphics? If yes I'd rather we put it in the graphics
> driver. We can always move it later ...

As stated in the cover letter, this will be used by virtio-video.

The proposed virtio-video patches: https://markmail.org/thread/p5d3k566srtdtute
The patch which imports these dma-bufs (slightly out of data, uses v3
of this patch set): https://markmail.org/thread/j4xlqaaim266qpks

> > ---
> > drivers/virtio/Makefile | 2 +-
> > drivers/virtio/virtio.c | 6 +++
> > drivers/virtio/virtio_dma_buf.c | 89 +++++++++++++++++++++++++++++++++
> > include/linux/virtio.h | 1 +
> > include/linux/virtio_dma_buf.h | 58 +++++++++++++++++++++
> > 5 files changed, 155 insertions(+), 1 deletion(-)
> > create mode 100644 drivers/virtio/virtio_dma_buf.c
> > create mode 100644 include/linux/virtio_dma_buf.h
> >
> > diff --git a/drivers/virtio/Makefile b/drivers/virtio/Makefile
> > index 29a1386ecc03..ecdae5b596de 100644
> > --- a/drivers/virtio/Makefile
> > +++ b/drivers/virtio/Makefile
> > @@ -1,5 +1,5 @@
> > # SPDX-License-Identifier: GPL-2.0
> > -obj-$(CONFIG_VIRTIO) += virtio.o virtio_ring.o
> > +obj-$(CONFIG_VIRTIO) += virtio.o virtio_ring.o virtio_dma_buf.o
> > obj-$(CONFIG_VIRTIO_MMIO) += virtio_mmio.o
> > obj-$(CONFIG_VIRTIO_PCI) += virtio_pci.o
> > virtio_pci-y := virtio_pci_modern.o virtio_pci_common.o
> > diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c
> > index a977e32a88f2..5d46f0ded92d 100644
> > --- a/drivers/virtio/virtio.c
> > +++ b/drivers/virtio/virtio.c
> > @@ -357,6 +357,12 @@ int register_virtio_device(struct virtio_device *dev)
> > }
> > EXPORT_SYMBOL_GPL(register_virtio_device);
> >
> > +bool is_virtio_device(struct device *dev)
> > +{
> > + return dev->bus == &virtio_bus;
> > +}
> > +EXPORT_SYMBOL_GPL(is_virtio_device);
> > +
> > void unregister_virtio_device(struct virtio_device *dev)
> > {
> > int index = dev->index; /* save for after device release */
> > diff --git a/drivers/virtio/virtio_dma_buf.c b/drivers/virtio/virtio_dma_buf.c
> > new file mode 100644
> > index 000000000000..23e3399b11ed
> > --- /dev/null
> > +++ b/drivers/virtio/virtio_dma_buf.c
> > @@ -0,0 +1,89 @@
> > +// SPDX-License-Identifier: GPL-2.0-or-later
> > +/*
> > + * dma-bufs for virtio exported objects
> > + *
> > + * Copyright (C) 2020 Google, Inc.
> > + */
> > +
> > +#include <linux/virtio_dma_buf.h>
> > +
> > +/**
> > + * virtio_dma_buf_export - Creates a new dma-buf for a virtio exported object
> > + *
> > + * This wraps dma_buf_export() to allow virtio drivers to create a dma-buf
> > + * for an virtio exported object that can be queried by other virtio drivers
> > + * for the object's UUID.
> > + */
> > +struct dma_buf *virtio_dma_buf_export(
> > + const struct virtio_dma_buf_export_info *virtio_exp_info)
> > +{
> > + struct dma_buf_export_info exp_info;
> > +
> > + if (!virtio_exp_info->ops
> > + || virtio_exp_info->ops->ops.attach != &virtio_dma_buf_attach
> > + || !virtio_exp_info->ops->get_uuid) {
> > + return ERR_PTR(-EINVAL);
> > + }
> > +
> > + exp_info.exp_name = virtio_exp_info->exp_name;
> > + exp_info.owner = virtio_exp_info->owner;
> > + exp_info.ops = &virtio_exp_info->ops->ops;
> > + exp_info.size = virtio_exp_info->size;
> > + exp_info.flags = virtio_exp_info->flags;
> > + exp_info.resv = virtio_exp_info->resv;
> > + exp_info.priv = virtio_exp_info->priv;
> > + BUILD_BUG_ON(sizeof(struct virtio_dma_buf_export_info)
> > + != sizeof(struct dma_buf_export_info));
>
> This is the only part that gives me pause. Why do we need this hack?
> What's wrong with just using dma_buf_export_info directly,
> and if you want the virtio ops, just using container_off?

This approach provides a more explicit type signature and a little
more type safety, I think. If others don't think it's a worthwhile
tradeoff, I can remove it.

-David

2020-06-06 20:08:45

by Michael S. Tsirkin

[permalink] [raw]
Subject: Re: [PATCH v4 1/3] virtio: add dma-buf support for exported objects

On Fri, Jun 05, 2020 at 10:28:42AM +0900, David Stevens wrote:
> On Fri, Jun 5, 2020 at 4:05 AM Michael S. Tsirkin <[email protected]> wrote:
> >
> > On Tue, May 26, 2020 at 07:58:09PM +0900, David Stevens wrote:
> > > This change adds a new flavor of dma-bufs that can be used by virtio
> > > drivers to share exported objects. A virtio dma-buf can be queried by
> > > virtio drivers to obtain the UUID which identifies the underlying
> > > exported object.
> > >
> > > Signed-off-by: David Stevens <[email protected]>
> >
> > Is this just for graphics? If yes I'd rather we put it in the graphics
> > driver. We can always move it later ...
>
> As stated in the cover letter, this will be used by virtio-video.
>
> The proposed virtio-video patches: https://markmail.org/thread/p5d3k566srtdtute
> The patch which imports these dma-bufs (slightly out of data, uses v3
> of this patch set): https://markmail.org/thread/j4xlqaaim266qpks
>
> > > ---
> > > drivers/virtio/Makefile | 2 +-
> > > drivers/virtio/virtio.c | 6 +++
> > > drivers/virtio/virtio_dma_buf.c | 89 +++++++++++++++++++++++++++++++++
> > > include/linux/virtio.h | 1 +
> > > include/linux/virtio_dma_buf.h | 58 +++++++++++++++++++++
> > > 5 files changed, 155 insertions(+), 1 deletion(-)
> > > create mode 100644 drivers/virtio/virtio_dma_buf.c
> > > create mode 100644 include/linux/virtio_dma_buf.h
> > >
> > > diff --git a/drivers/virtio/Makefile b/drivers/virtio/Makefile
> > > index 29a1386ecc03..ecdae5b596de 100644
> > > --- a/drivers/virtio/Makefile
> > > +++ b/drivers/virtio/Makefile
> > > @@ -1,5 +1,5 @@
> > > # SPDX-License-Identifier: GPL-2.0
> > > -obj-$(CONFIG_VIRTIO) += virtio.o virtio_ring.o
> > > +obj-$(CONFIG_VIRTIO) += virtio.o virtio_ring.o virtio_dma_buf.o
> > > obj-$(CONFIG_VIRTIO_MMIO) += virtio_mmio.o
> > > obj-$(CONFIG_VIRTIO_PCI) += virtio_pci.o
> > > virtio_pci-y := virtio_pci_modern.o virtio_pci_common.o
> > > diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c
> > > index a977e32a88f2..5d46f0ded92d 100644
> > > --- a/drivers/virtio/virtio.c
> > > +++ b/drivers/virtio/virtio.c
> > > @@ -357,6 +357,12 @@ int register_virtio_device(struct virtio_device *dev)
> > > }
> > > EXPORT_SYMBOL_GPL(register_virtio_device);
> > >
> > > +bool is_virtio_device(struct device *dev)
> > > +{
> > > + return dev->bus == &virtio_bus;
> > > +}
> > > +EXPORT_SYMBOL_GPL(is_virtio_device);
> > > +
> > > void unregister_virtio_device(struct virtio_device *dev)
> > > {
> > > int index = dev->index; /* save for after device release */
> > > diff --git a/drivers/virtio/virtio_dma_buf.c b/drivers/virtio/virtio_dma_buf.c
> > > new file mode 100644
> > > index 000000000000..23e3399b11ed
> > > --- /dev/null
> > > +++ b/drivers/virtio/virtio_dma_buf.c
> > > @@ -0,0 +1,89 @@
> > > +// SPDX-License-Identifier: GPL-2.0-or-later
> > > +/*
> > > + * dma-bufs for virtio exported objects
> > > + *
> > > + * Copyright (C) 2020 Google, Inc.
> > > + */
> > > +
> > > +#include <linux/virtio_dma_buf.h>
> > > +
> > > +/**
> > > + * virtio_dma_buf_export - Creates a new dma-buf for a virtio exported object
> > > + *
> > > + * This wraps dma_buf_export() to allow virtio drivers to create a dma-buf
> > > + * for an virtio exported object that can be queried by other virtio drivers
> > > + * for the object's UUID.
> > > + */
> > > +struct dma_buf *virtio_dma_buf_export(
> > > + const struct virtio_dma_buf_export_info *virtio_exp_info)
> > > +{
> > > + struct dma_buf_export_info exp_info;
> > > +
> > > + if (!virtio_exp_info->ops
> > > + || virtio_exp_info->ops->ops.attach != &virtio_dma_buf_attach
> > > + || !virtio_exp_info->ops->get_uuid) {
> > > + return ERR_PTR(-EINVAL);
> > > + }
> > > +
> > > + exp_info.exp_name = virtio_exp_info->exp_name;
> > > + exp_info.owner = virtio_exp_info->owner;
> > > + exp_info.ops = &virtio_exp_info->ops->ops;
> > > + exp_info.size = virtio_exp_info->size;
> > > + exp_info.flags = virtio_exp_info->flags;
> > > + exp_info.resv = virtio_exp_info->resv;
> > > + exp_info.priv = virtio_exp_info->priv;
> > > + BUILD_BUG_ON(sizeof(struct virtio_dma_buf_export_info)
> > > + != sizeof(struct dma_buf_export_info));
> >
> > This is the only part that gives me pause. Why do we need this hack?
> > What's wrong with just using dma_buf_export_info directly,
> > and if you want the virtio ops, just using container_off?
>
> This approach provides a more explicit type signature and a little
> more type safety, I think. If others don't think it's a worthwhile
> tradeoff, I can remove it.
>
> -David

The cost is that if dma_buf_export_info changes even slightly, we get
weird crashes.

--
MST

2020-06-08 01:35:39

by David Stevens

[permalink] [raw]
Subject: Re: [PATCH v4 1/3] virtio: add dma-buf support for exported objects

On Sun, Jun 7, 2020 at 5:04 AM Michael S. Tsirkin <[email protected]> wrote:
>
> On Fri, Jun 05, 2020 at 10:28:42AM +0900, David Stevens wrote:
> > On Fri, Jun 5, 2020 at 4:05 AM Michael S. Tsirkin <[email protected]> wrote:
> > >
> > > On Tue, May 26, 2020 at 07:58:09PM +0900, David Stevens wrote:
> > > > This change adds a new flavor of dma-bufs that can be used by virtio
> > > > drivers to share exported objects. A virtio dma-buf can be queried by
> > > > virtio drivers to obtain the UUID which identifies the underlying
> > > > exported object.
> > > >
> > > > Signed-off-by: David Stevens <[email protected]>
> > >
> > > Is this just for graphics? If yes I'd rather we put it in the graphics
> > > driver. We can always move it later ...
> >
> > As stated in the cover letter, this will be used by virtio-video.
> >
> > The proposed virtio-video patches: https://markmail.org/thread/p5d3k566srtdtute
> > The patch which imports these dma-bufs (slightly out of data, uses v3
> > of this patch set): https://markmail.org/thread/j4xlqaaim266qpks
> >
> > > > ---
> > > > drivers/virtio/Makefile | 2 +-
> > > > drivers/virtio/virtio.c | 6 +++
> > > > drivers/virtio/virtio_dma_buf.c | 89 +++++++++++++++++++++++++++++++++
> > > > include/linux/virtio.h | 1 +
> > > > include/linux/virtio_dma_buf.h | 58 +++++++++++++++++++++
> > > > 5 files changed, 155 insertions(+), 1 deletion(-)
> > > > create mode 100644 drivers/virtio/virtio_dma_buf.c
> > > > create mode 100644 include/linux/virtio_dma_buf.h
> > > >
> > > > diff --git a/drivers/virtio/Makefile b/drivers/virtio/Makefile
> > > > index 29a1386ecc03..ecdae5b596de 100644
> > > > --- a/drivers/virtio/Makefile
> > > > +++ b/drivers/virtio/Makefile
> > > > @@ -1,5 +1,5 @@
> > > > # SPDX-License-Identifier: GPL-2.0
> > > > -obj-$(CONFIG_VIRTIO) += virtio.o virtio_ring.o
> > > > +obj-$(CONFIG_VIRTIO) += virtio.o virtio_ring.o virtio_dma_buf.o
> > > > obj-$(CONFIG_VIRTIO_MMIO) += virtio_mmio.o
> > > > obj-$(CONFIG_VIRTIO_PCI) += virtio_pci.o
> > > > virtio_pci-y := virtio_pci_modern.o virtio_pci_common.o
> > > > diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c
> > > > index a977e32a88f2..5d46f0ded92d 100644
> > > > --- a/drivers/virtio/virtio.c
> > > > +++ b/drivers/virtio/virtio.c
> > > > @@ -357,6 +357,12 @@ int register_virtio_device(struct virtio_device *dev)
> > > > }
> > > > EXPORT_SYMBOL_GPL(register_virtio_device);
> > > >
> > > > +bool is_virtio_device(struct device *dev)
> > > > +{
> > > > + return dev->bus == &virtio_bus;
> > > > +}
> > > > +EXPORT_SYMBOL_GPL(is_virtio_device);
> > > > +
> > > > void unregister_virtio_device(struct virtio_device *dev)
> > > > {
> > > > int index = dev->index; /* save for after device release */
> > > > diff --git a/drivers/virtio/virtio_dma_buf.c b/drivers/virtio/virtio_dma_buf.c
> > > > new file mode 100644
> > > > index 000000000000..23e3399b11ed
> > > > --- /dev/null
> > > > +++ b/drivers/virtio/virtio_dma_buf.c
> > > > @@ -0,0 +1,89 @@
> > > > +// SPDX-License-Identifier: GPL-2.0-or-later
> > > > +/*
> > > > + * dma-bufs for virtio exported objects
> > > > + *
> > > > + * Copyright (C) 2020 Google, Inc.
> > > > + */
> > > > +
> > > > +#include <linux/virtio_dma_buf.h>
> > > > +
> > > > +/**
> > > > + * virtio_dma_buf_export - Creates a new dma-buf for a virtio exported object
> > > > + *
> > > > + * This wraps dma_buf_export() to allow virtio drivers to create a dma-buf
> > > > + * for an virtio exported object that can be queried by other virtio drivers
> > > > + * for the object's UUID.
> > > > + */
> > > > +struct dma_buf *virtio_dma_buf_export(
> > > > + const struct virtio_dma_buf_export_info *virtio_exp_info)
> > > > +{
> > > > + struct dma_buf_export_info exp_info;
> > > > +
> > > > + if (!virtio_exp_info->ops
> > > > + || virtio_exp_info->ops->ops.attach != &virtio_dma_buf_attach
> > > > + || !virtio_exp_info->ops->get_uuid) {
> > > > + return ERR_PTR(-EINVAL);
> > > > + }
> > > > +
> > > > + exp_info.exp_name = virtio_exp_info->exp_name;
> > > > + exp_info.owner = virtio_exp_info->owner;
> > > > + exp_info.ops = &virtio_exp_info->ops->ops;
> > > > + exp_info.size = virtio_exp_info->size;
> > > > + exp_info.flags = virtio_exp_info->flags;
> > > > + exp_info.resv = virtio_exp_info->resv;
> > > > + exp_info.priv = virtio_exp_info->priv;
> > > > + BUILD_BUG_ON(sizeof(struct virtio_dma_buf_export_info)
> > > > + != sizeof(struct dma_buf_export_info));
> > >
> > > This is the only part that gives me pause. Why do we need this hack?
> > > What's wrong with just using dma_buf_export_info directly,
> > > and if you want the virtio ops, just using container_off?
> >
> > This approach provides a more explicit type signature and a little
> > more type safety, I think. If others don't think it's a worthwhile
> > tradeoff, I can remove it.
> >
> > -David
>
> The cost is that if dma_buf_export_info changes even slightly, we get
> weird crashes.

I'm not sure I understand what types of changes you're referring to.
As this is written, virtio-dma-buf is just another client of the
dma-buf API. If this were rewritten to use dma-buf directly, then
whatever code calls virtio_dma_buf_export would become a client of the
dma-buf API. If the semantics of existing fields in the dma-buf API
were changed and virtio-dma-buf wasn't updated, then yes, you could
get weird crashes from virtio-dma-buf. However, the same problem would
exist if virtio_dma_buf_export used dma-buf directly - changes to
dma-buf's semantics could cause weird crashes if the caller of
virtio_dma_buf_export wasn't updated properly. The only potential
source of problems I see is if virtio_dma_buf_export_info wasn't
updated properly, but virtio_dma_buf_export_info is dead simple, so I
don't know if that's really a problem.

-David

2020-06-08 06:05:51

by Michael S. Tsirkin

[permalink] [raw]
Subject: Re: [PATCH v4 1/3] virtio: add dma-buf support for exported objects

On Mon, Jun 08, 2020 at 10:33:09AM +0900, David Stevens wrote:
> On Sun, Jun 7, 2020 at 5:04 AM Michael S. Tsirkin <[email protected]> wrote:
> >
> > On Fri, Jun 05, 2020 at 10:28:42AM +0900, David Stevens wrote:
> > > On Fri, Jun 5, 2020 at 4:05 AM Michael S. Tsirkin <[email protected]> wrote:
> > > >
> > > > On Tue, May 26, 2020 at 07:58:09PM +0900, David Stevens wrote:
> > > > > This change adds a new flavor of dma-bufs that can be used by virtio
> > > > > drivers to share exported objects. A virtio dma-buf can be queried by
> > > > > virtio drivers to obtain the UUID which identifies the underlying
> > > > > exported object.
> > > > >
> > > > > Signed-off-by: David Stevens <[email protected]>
> > > >
> > > > Is this just for graphics? If yes I'd rather we put it in the graphics
> > > > driver. We can always move it later ...
> > >
> > > As stated in the cover letter, this will be used by virtio-video.
> > >
> > > The proposed virtio-video patches: https://markmail.org/thread/p5d3k566srtdtute
> > > The patch which imports these dma-bufs (slightly out of data, uses v3
> > > of this patch set): https://markmail.org/thread/j4xlqaaim266qpks
> > >
> > > > > ---
> > > > > drivers/virtio/Makefile | 2 +-
> > > > > drivers/virtio/virtio.c | 6 +++
> > > > > drivers/virtio/virtio_dma_buf.c | 89 +++++++++++++++++++++++++++++++++
> > > > > include/linux/virtio.h | 1 +
> > > > > include/linux/virtio_dma_buf.h | 58 +++++++++++++++++++++
> > > > > 5 files changed, 155 insertions(+), 1 deletion(-)
> > > > > create mode 100644 drivers/virtio/virtio_dma_buf.c
> > > > > create mode 100644 include/linux/virtio_dma_buf.h
> > > > >
> > > > > diff --git a/drivers/virtio/Makefile b/drivers/virtio/Makefile
> > > > > index 29a1386ecc03..ecdae5b596de 100644
> > > > > --- a/drivers/virtio/Makefile
> > > > > +++ b/drivers/virtio/Makefile
> > > > > @@ -1,5 +1,5 @@
> > > > > # SPDX-License-Identifier: GPL-2.0
> > > > > -obj-$(CONFIG_VIRTIO) += virtio.o virtio_ring.o
> > > > > +obj-$(CONFIG_VIRTIO) += virtio.o virtio_ring.o virtio_dma_buf.o
> > > > > obj-$(CONFIG_VIRTIO_MMIO) += virtio_mmio.o
> > > > > obj-$(CONFIG_VIRTIO_PCI) += virtio_pci.o
> > > > > virtio_pci-y := virtio_pci_modern.o virtio_pci_common.o
> > > > > diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c
> > > > > index a977e32a88f2..5d46f0ded92d 100644
> > > > > --- a/drivers/virtio/virtio.c
> > > > > +++ b/drivers/virtio/virtio.c
> > > > > @@ -357,6 +357,12 @@ int register_virtio_device(struct virtio_device *dev)
> > > > > }
> > > > > EXPORT_SYMBOL_GPL(register_virtio_device);
> > > > >
> > > > > +bool is_virtio_device(struct device *dev)
> > > > > +{
> > > > > + return dev->bus == &virtio_bus;
> > > > > +}
> > > > > +EXPORT_SYMBOL_GPL(is_virtio_device);
> > > > > +
> > > > > void unregister_virtio_device(struct virtio_device *dev)
> > > > > {
> > > > > int index = dev->index; /* save for after device release */
> > > > > diff --git a/drivers/virtio/virtio_dma_buf.c b/drivers/virtio/virtio_dma_buf.c
> > > > > new file mode 100644
> > > > > index 000000000000..23e3399b11ed
> > > > > --- /dev/null
> > > > > +++ b/drivers/virtio/virtio_dma_buf.c
> > > > > @@ -0,0 +1,89 @@
> > > > > +// SPDX-License-Identifier: GPL-2.0-or-later
> > > > > +/*
> > > > > + * dma-bufs for virtio exported objects
> > > > > + *
> > > > > + * Copyright (C) 2020 Google, Inc.
> > > > > + */
> > > > > +
> > > > > +#include <linux/virtio_dma_buf.h>
> > > > > +
> > > > > +/**
> > > > > + * virtio_dma_buf_export - Creates a new dma-buf for a virtio exported object
> > > > > + *
> > > > > + * This wraps dma_buf_export() to allow virtio drivers to create a dma-buf
> > > > > + * for an virtio exported object that can be queried by other virtio drivers
> > > > > + * for the object's UUID.
> > > > > + */
> > > > > +struct dma_buf *virtio_dma_buf_export(
> > > > > + const struct virtio_dma_buf_export_info *virtio_exp_info)
> > > > > +{
> > > > > + struct dma_buf_export_info exp_info;
> > > > > +
> > > > > + if (!virtio_exp_info->ops
> > > > > + || virtio_exp_info->ops->ops.attach != &virtio_dma_buf_attach
> > > > > + || !virtio_exp_info->ops->get_uuid) {
> > > > > + return ERR_PTR(-EINVAL);
> > > > > + }
> > > > > +
> > > > > + exp_info.exp_name = virtio_exp_info->exp_name;
> > > > > + exp_info.owner = virtio_exp_info->owner;
> > > > > + exp_info.ops = &virtio_exp_info->ops->ops;
> > > > > + exp_info.size = virtio_exp_info->size;
> > > > > + exp_info.flags = virtio_exp_info->flags;
> > > > > + exp_info.resv = virtio_exp_info->resv;
> > > > > + exp_info.priv = virtio_exp_info->priv;
> > > > > + BUILD_BUG_ON(sizeof(struct virtio_dma_buf_export_info)
> > > > > + != sizeof(struct dma_buf_export_info));
> > > >
> > > > This is the only part that gives me pause. Why do we need this hack?
> > > > What's wrong with just using dma_buf_export_info directly,
> > > > and if you want the virtio ops, just using container_off?
> > >
> > > This approach provides a more explicit type signature and a little
> > > more type safety, I think. If others don't think it's a worthwhile
> > > tradeoff, I can remove it.
> > >
> > > -David
> >
> > The cost is that if dma_buf_export_info changes even slightly, we get
> > weird crashes.
>
> I'm not sure I understand what types of changes you're referring to.
> As this is written, virtio-dma-buf is just another client of the
> dma-buf API. If this were rewritten to use dma-buf directly, then
> whatever code calls virtio_dma_buf_export would become a client of the
> dma-buf API. If the semantics of existing fields in the dma-buf API
> were changed and virtio-dma-buf wasn't updated, then yes, you could
> get weird crashes from virtio-dma-buf.
> However, the same problem would
> exist if virtio_dma_buf_export used dma-buf directly - changes to
> dma-buf's semantics could cause weird crashes if the caller of
> virtio_dma_buf_export wasn't updated properly. The only potential
> source of problems I see is if virtio_dma_buf_export_info wasn't
> updated properly, but virtio_dma_buf_export_info is dead simple, so I
> don't know if that's really a problem.
>
> -David

I think you can get weird crashes if fields in dma buf are reordered, or
if a field size changes. You have a build bug catching overall struct
size changes but that can remain the same due do compiler padding or
such.

--
MST

2020-06-08 08:34:55

by David Stevens

[permalink] [raw]
Subject: Re: [PATCH v4 1/3] virtio: add dma-buf support for exported objects

On Mon, Jun 8, 2020 at 3:00 PM Michael S. Tsirkin <[email protected]> wrote:
>
> On Mon, Jun 08, 2020 at 10:33:09AM +0900, David Stevens wrote:
> > On Sun, Jun 7, 2020 at 5:04 AM Michael S. Tsirkin <[email protected]> wrote:
> > >
> > > On Fri, Jun 05, 2020 at 10:28:42AM +0900, David Stevens wrote:
> > > > On Fri, Jun 5, 2020 at 4:05 AM Michael S. Tsirkin <[email protected]> wrote:
> > > > >
> > > > > On Tue, May 26, 2020 at 07:58:09PM +0900, David Stevens wrote:
> > > > > > This change adds a new flavor of dma-bufs that can be used by virtio
> > > > > > drivers to share exported objects. A virtio dma-buf can be queried by
> > > > > > virtio drivers to obtain the UUID which identifies the underlying
> > > > > > exported object.
> > > > > >
> > > > > > Signed-off-by: David Stevens <[email protected]>
> > > > >
> > > > > Is this just for graphics? If yes I'd rather we put it in the graphics
> > > > > driver. We can always move it later ...
> > > >
> > > > As stated in the cover letter, this will be used by virtio-video.
> > > >
> > > > The proposed virtio-video patches: https://markmail.org/thread/p5d3k566srtdtute
> > > > The patch which imports these dma-bufs (slightly out of data, uses v3
> > > > of this patch set): https://markmail.org/thread/j4xlqaaim266qpks
> > > >
> > > > > > ---
> > > > > > drivers/virtio/Makefile | 2 +-
> > > > > > drivers/virtio/virtio.c | 6 +++
> > > > > > drivers/virtio/virtio_dma_buf.c | 89 +++++++++++++++++++++++++++++++++
> > > > > > include/linux/virtio.h | 1 +
> > > > > > include/linux/virtio_dma_buf.h | 58 +++++++++++++++++++++
> > > > > > 5 files changed, 155 insertions(+), 1 deletion(-)
> > > > > > create mode 100644 drivers/virtio/virtio_dma_buf.c
> > > > > > create mode 100644 include/linux/virtio_dma_buf.h
> > > > > >
> > > > > > diff --git a/drivers/virtio/Makefile b/drivers/virtio/Makefile
> > > > > > index 29a1386ecc03..ecdae5b596de 100644
> > > > > > --- a/drivers/virtio/Makefile
> > > > > > +++ b/drivers/virtio/Makefile
> > > > > > @@ -1,5 +1,5 @@
> > > > > > # SPDX-License-Identifier: GPL-2.0
> > > > > > -obj-$(CONFIG_VIRTIO) += virtio.o virtio_ring.o
> > > > > > +obj-$(CONFIG_VIRTIO) += virtio.o virtio_ring.o virtio_dma_buf.o
> > > > > > obj-$(CONFIG_VIRTIO_MMIO) += virtio_mmio.o
> > > > > > obj-$(CONFIG_VIRTIO_PCI) += virtio_pci.o
> > > > > > virtio_pci-y := virtio_pci_modern.o virtio_pci_common.o
> > > > > > diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c
> > > > > > index a977e32a88f2..5d46f0ded92d 100644
> > > > > > --- a/drivers/virtio/virtio.c
> > > > > > +++ b/drivers/virtio/virtio.c
> > > > > > @@ -357,6 +357,12 @@ int register_virtio_device(struct virtio_device *dev)
> > > > > > }
> > > > > > EXPORT_SYMBOL_GPL(register_virtio_device);
> > > > > >
> > > > > > +bool is_virtio_device(struct device *dev)
> > > > > > +{
> > > > > > + return dev->bus == &virtio_bus;
> > > > > > +}
> > > > > > +EXPORT_SYMBOL_GPL(is_virtio_device);
> > > > > > +
> > > > > > void unregister_virtio_device(struct virtio_device *dev)
> > > > > > {
> > > > > > int index = dev->index; /* save for after device release */
> > > > > > diff --git a/drivers/virtio/virtio_dma_buf.c b/drivers/virtio/virtio_dma_buf.c
> > > > > > new file mode 100644
> > > > > > index 000000000000..23e3399b11ed
> > > > > > --- /dev/null
> > > > > > +++ b/drivers/virtio/virtio_dma_buf.c
> > > > > > @@ -0,0 +1,89 @@
> > > > > > +// SPDX-License-Identifier: GPL-2.0-or-later
> > > > > > +/*
> > > > > > + * dma-bufs for virtio exported objects
> > > > > > + *
> > > > > > + * Copyright (C) 2020 Google, Inc.
> > > > > > + */
> > > > > > +
> > > > > > +#include <linux/virtio_dma_buf.h>
> > > > > > +
> > > > > > +/**
> > > > > > + * virtio_dma_buf_export - Creates a new dma-buf for a virtio exported object
> > > > > > + *
> > > > > > + * This wraps dma_buf_export() to allow virtio drivers to create a dma-buf
> > > > > > + * for an virtio exported object that can be queried by other virtio drivers
> > > > > > + * for the object's UUID.
> > > > > > + */
> > > > > > +struct dma_buf *virtio_dma_buf_export(
> > > > > > + const struct virtio_dma_buf_export_info *virtio_exp_info)
> > > > > > +{
> > > > > > + struct dma_buf_export_info exp_info;
> > > > > > +
> > > > > > + if (!virtio_exp_info->ops
> > > > > > + || virtio_exp_info->ops->ops.attach != &virtio_dma_buf_attach
> > > > > > + || !virtio_exp_info->ops->get_uuid) {
> > > > > > + return ERR_PTR(-EINVAL);
> > > > > > + }
> > > > > > +
> > > > > > + exp_info.exp_name = virtio_exp_info->exp_name;
> > > > > > + exp_info.owner = virtio_exp_info->owner;
> > > > > > + exp_info.ops = &virtio_exp_info->ops->ops;
> > > > > > + exp_info.size = virtio_exp_info->size;
> > > > > > + exp_info.flags = virtio_exp_info->flags;
> > > > > > + exp_info.resv = virtio_exp_info->resv;
> > > > > > + exp_info.priv = virtio_exp_info->priv;
> > > > > > + BUILD_BUG_ON(sizeof(struct virtio_dma_buf_export_info)
> > > > > > + != sizeof(struct dma_buf_export_info));
> > > > >
> > > > > This is the only part that gives me pause. Why do we need this hack?
> > > > > What's wrong with just using dma_buf_export_info directly,
> > > > > and if you want the virtio ops, just using container_off?
> > > >
> > > > This approach provides a more explicit type signature and a little
> > > > more type safety, I think. If others don't think it's a worthwhile
> > > > tradeoff, I can remove it.
> > > >
> > > > -David
> > >
> > > The cost is that if dma_buf_export_info changes even slightly, we get
> > > weird crashes.
> >
> > I'm not sure I understand what types of changes you're referring to.
> > As this is written, virtio-dma-buf is just another client of the
> > dma-buf API. If this were rewritten to use dma-buf directly, then
> > whatever code calls virtio_dma_buf_export would become a client of the
> > dma-buf API. If the semantics of existing fields in the dma-buf API
> > were changed and virtio-dma-buf wasn't updated, then yes, you could
> > get weird crashes from virtio-dma-buf.
> > However, the same problem would
> > exist if virtio_dma_buf_export used dma-buf directly - changes to
> > dma-buf's semantics could cause weird crashes if the caller of
> > virtio_dma_buf_export wasn't updated properly. The only potential
> > source of problems I see is if virtio_dma_buf_export_info wasn't
> > updated properly, but virtio_dma_buf_export_info is dead simple, so I
> > don't know if that's really a problem.
> >
> > -David
>
> I think you can get weird crashes if fields in dma buf are reordered, or
> if a field size changes. You have a build bug catching overall struct
> size changes but that can remain the same due do compiler padding or
> such.

Since it's manually copying the fields instead of trying something
clever like memcpy, I don't see how reordering the fields or changing
the size of the fields would cause problems. Right now,
virtio_dma_buf_export is just a regular client of dma_buf_export, no
different than any of the other call sites in the kernel.

Overall, I don't really think that this is a problem. If someone makes
breaking changes to the semantics of dma-buf, then they will need to
update this call site, just like they will need to update all of the
other call sites in the kernel. If someone adds new functionality to
dma-buf and adds another field to dma_buf_export_info, the build bug
is a reminder to add it to virtio_dma_buf_export_info. However, if the
struct padding happens to work out such that the build bug doesn't
trigger, that doesn't really matter - it just means that the new
dma-buf feature won't be exposed by virito-dma-buf until someone needs
it and notices that the new field is missing.

-David

2020-06-08 09:08:09

by Michael S. Tsirkin

[permalink] [raw]
Subject: Re: [PATCH v4 1/3] virtio: add dma-buf support for exported objects

On Mon, Jun 08, 2020 at 05:32:26PM +0900, David Stevens wrote:
> On Mon, Jun 8, 2020 at 3:00 PM Michael S. Tsirkin <[email protected]> wrote:
> >
> > On Mon, Jun 08, 2020 at 10:33:09AM +0900, David Stevens wrote:
> > > On Sun, Jun 7, 2020 at 5:04 AM Michael S. Tsirkin <[email protected]> wrote:
> > > >
> > > > On Fri, Jun 05, 2020 at 10:28:42AM +0900, David Stevens wrote:
> > > > > On Fri, Jun 5, 2020 at 4:05 AM Michael S. Tsirkin <[email protected]> wrote:
> > > > > >
> > > > > > On Tue, May 26, 2020 at 07:58:09PM +0900, David Stevens wrote:
> > > > > > > This change adds a new flavor of dma-bufs that can be used by virtio
> > > > > > > drivers to share exported objects. A virtio dma-buf can be queried by
> > > > > > > virtio drivers to obtain the UUID which identifies the underlying
> > > > > > > exported object.
> > > > > > >
> > > > > > > Signed-off-by: David Stevens <[email protected]>
> > > > > >
> > > > > > Is this just for graphics? If yes I'd rather we put it in the graphics
> > > > > > driver. We can always move it later ...
> > > > >
> > > > > As stated in the cover letter, this will be used by virtio-video.
> > > > >
> > > > > The proposed virtio-video patches: https://markmail.org/thread/p5d3k566srtdtute
> > > > > The patch which imports these dma-bufs (slightly out of data, uses v3
> > > > > of this patch set): https://markmail.org/thread/j4xlqaaim266qpks
> > > > >
> > > > > > > ---
> > > > > > > drivers/virtio/Makefile | 2 +-
> > > > > > > drivers/virtio/virtio.c | 6 +++
> > > > > > > drivers/virtio/virtio_dma_buf.c | 89 +++++++++++++++++++++++++++++++++
> > > > > > > include/linux/virtio.h | 1 +
> > > > > > > include/linux/virtio_dma_buf.h | 58 +++++++++++++++++++++
> > > > > > > 5 files changed, 155 insertions(+), 1 deletion(-)
> > > > > > > create mode 100644 drivers/virtio/virtio_dma_buf.c
> > > > > > > create mode 100644 include/linux/virtio_dma_buf.h
> > > > > > >
> > > > > > > diff --git a/drivers/virtio/Makefile b/drivers/virtio/Makefile
> > > > > > > index 29a1386ecc03..ecdae5b596de 100644
> > > > > > > --- a/drivers/virtio/Makefile
> > > > > > > +++ b/drivers/virtio/Makefile
> > > > > > > @@ -1,5 +1,5 @@
> > > > > > > # SPDX-License-Identifier: GPL-2.0
> > > > > > > -obj-$(CONFIG_VIRTIO) += virtio.o virtio_ring.o
> > > > > > > +obj-$(CONFIG_VIRTIO) += virtio.o virtio_ring.o virtio_dma_buf.o
> > > > > > > obj-$(CONFIG_VIRTIO_MMIO) += virtio_mmio.o
> > > > > > > obj-$(CONFIG_VIRTIO_PCI) += virtio_pci.o
> > > > > > > virtio_pci-y := virtio_pci_modern.o virtio_pci_common.o
> > > > > > > diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c
> > > > > > > index a977e32a88f2..5d46f0ded92d 100644
> > > > > > > --- a/drivers/virtio/virtio.c
> > > > > > > +++ b/drivers/virtio/virtio.c
> > > > > > > @@ -357,6 +357,12 @@ int register_virtio_device(struct virtio_device *dev)
> > > > > > > }
> > > > > > > EXPORT_SYMBOL_GPL(register_virtio_device);
> > > > > > >
> > > > > > > +bool is_virtio_device(struct device *dev)
> > > > > > > +{
> > > > > > > + return dev->bus == &virtio_bus;
> > > > > > > +}
> > > > > > > +EXPORT_SYMBOL_GPL(is_virtio_device);
> > > > > > > +
> > > > > > > void unregister_virtio_device(struct virtio_device *dev)
> > > > > > > {
> > > > > > > int index = dev->index; /* save for after device release */
> > > > > > > diff --git a/drivers/virtio/virtio_dma_buf.c b/drivers/virtio/virtio_dma_buf.c
> > > > > > > new file mode 100644
> > > > > > > index 000000000000..23e3399b11ed
> > > > > > > --- /dev/null
> > > > > > > +++ b/drivers/virtio/virtio_dma_buf.c
> > > > > > > @@ -0,0 +1,89 @@
> > > > > > > +// SPDX-License-Identifier: GPL-2.0-or-later
> > > > > > > +/*
> > > > > > > + * dma-bufs for virtio exported objects
> > > > > > > + *
> > > > > > > + * Copyright (C) 2020 Google, Inc.
> > > > > > > + */
> > > > > > > +
> > > > > > > +#include <linux/virtio_dma_buf.h>
> > > > > > > +
> > > > > > > +/**
> > > > > > > + * virtio_dma_buf_export - Creates a new dma-buf for a virtio exported object
> > > > > > > + *
> > > > > > > + * This wraps dma_buf_export() to allow virtio drivers to create a dma-buf
> > > > > > > + * for an virtio exported object that can be queried by other virtio drivers
> > > > > > > + * for the object's UUID.
> > > > > > > + */
> > > > > > > +struct dma_buf *virtio_dma_buf_export(
> > > > > > > + const struct virtio_dma_buf_export_info *virtio_exp_info)
> > > > > > > +{
> > > > > > > + struct dma_buf_export_info exp_info;
> > > > > > > +
> > > > > > > + if (!virtio_exp_info->ops
> > > > > > > + || virtio_exp_info->ops->ops.attach != &virtio_dma_buf_attach
> > > > > > > + || !virtio_exp_info->ops->get_uuid) {
> > > > > > > + return ERR_PTR(-EINVAL);
> > > > > > > + }
> > > > > > > +
> > > > > > > + exp_info.exp_name = virtio_exp_info->exp_name;
> > > > > > > + exp_info.owner = virtio_exp_info->owner;
> > > > > > > + exp_info.ops = &virtio_exp_info->ops->ops;
> > > > > > > + exp_info.size = virtio_exp_info->size;
> > > > > > > + exp_info.flags = virtio_exp_info->flags;
> > > > > > > + exp_info.resv = virtio_exp_info->resv;
> > > > > > > + exp_info.priv = virtio_exp_info->priv;
> > > > > > > + BUILD_BUG_ON(sizeof(struct virtio_dma_buf_export_info)
> > > > > > > + != sizeof(struct dma_buf_export_info));
> > > > > >
> > > > > > This is the only part that gives me pause. Why do we need this hack?
> > > > > > What's wrong with just using dma_buf_export_info directly,
> > > > > > and if you want the virtio ops, just using container_off?
> > > > >
> > > > > This approach provides a more explicit type signature and a little
> > > > > more type safety, I think. If others don't think it's a worthwhile
> > > > > tradeoff, I can remove it.
> > > > >
> > > > > -David
> > > >
> > > > The cost is that if dma_buf_export_info changes even slightly, we get
> > > > weird crashes.
> > >
> > > I'm not sure I understand what types of changes you're referring to.
> > > As this is written, virtio-dma-buf is just another client of the
> > > dma-buf API. If this were rewritten to use dma-buf directly, then
> > > whatever code calls virtio_dma_buf_export would become a client of the
> > > dma-buf API. If the semantics of existing fields in the dma-buf API
> > > were changed and virtio-dma-buf wasn't updated, then yes, you could
> > > get weird crashes from virtio-dma-buf.
> > > However, the same problem would
> > > exist if virtio_dma_buf_export used dma-buf directly - changes to
> > > dma-buf's semantics could cause weird crashes if the caller of
> > > virtio_dma_buf_export wasn't updated properly. The only potential
> > > source of problems I see is if virtio_dma_buf_export_info wasn't
> > > updated properly, but virtio_dma_buf_export_info is dead simple, so I
> > > don't know if that's really a problem.
> > >
> > > -David
> >
> > I think you can get weird crashes if fields in dma buf are reordered, or
> > if a field size changes. You have a build bug catching overall struct
> > size changes but that can remain the same due do compiler padding or
> > such.
>
> Since it's manually copying the fields instead of trying something
> clever like memcpy, I don't see how reordering the fields or changing
> the size of the fields would cause problems. Right now,
> virtio_dma_buf_export is just a regular client of dma_buf_export, no
> different than any of the other call sites in the kernel.
>
> Overall, I don't really think that this is a problem. If someone makes
> breaking changes to the semantics of dma-buf, then they will need to
> update this call site, just like they will need to update all of the
> other call sites in the kernel. If someone adds new functionality to
> dma-buf and adds another field to dma_buf_export_info, the build bug
> is a reminder to add it to virtio_dma_buf_export_info. However, if the
> struct padding happens to work out such that the build bug doesn't
> trigger, that doesn't really matter - it just means that the new
> dma-buf feature won't be exposed by virito-dma-buf until someone needs
> it and notices that the new field is missing.
>
> -David

Think about the reasons for the BUILD_BUG_ON being there, checking
struct sizes like this is a clear sign of something strange going on.


But really this is just unnecessary complexity anyway.

The only difference with dma_buf is get_uuid and device_attacj, isn't it?

And they are called like this:



+ */
+int virtio_dma_buf_get_uuid(struct dma_buf *dma_buf,
+ uuid_t *uuid)
+{
+ const struct virtio_dma_buf_ops *ops = container_of(
+ dma_buf->ops, const struct virtio_dma_buf_ops, ops);
+
+ if (!is_virtio_dma_buf(dma_buf))
+ return -EINVAL;
+
+ return ops->get_uuid(dma_buf, uuid);
+}


So you are doing the container_of trick anyway, the extra structure
did not give us any type safety.


--
MST

2020-06-08 09:35:28

by David Stevens

[permalink] [raw]
Subject: Re: [PATCH v4 1/3] virtio: add dma-buf support for exported objects

On Mon, Jun 8, 2020 at 6:05 PM Michael S. Tsirkin <[email protected]> wrote:
>
> On Mon, Jun 08, 2020 at 05:32:26PM +0900, David Stevens wrote:
> > On Mon, Jun 8, 2020 at 3:00 PM Michael S. Tsirkin <[email protected]> wrote:
> > >
> > > On Mon, Jun 08, 2020 at 10:33:09AM +0900, David Stevens wrote:
> > > > On Sun, Jun 7, 2020 at 5:04 AM Michael S. Tsirkin <[email protected]> wrote:
> > > > >
> > > > > On Fri, Jun 05, 2020 at 10:28:42AM +0900, David Stevens wrote:
> > > > > > On Fri, Jun 5, 2020 at 4:05 AM Michael S. Tsirkin <[email protected]> wrote:
> > > > > > >
> > > > > > > On Tue, May 26, 2020 at 07:58:09PM +0900, David Stevens wrote:
> > > > > > > > This change adds a new flavor of dma-bufs that can be used by virtio
> > > > > > > > drivers to share exported objects. A virtio dma-buf can be queried by
> > > > > > > > virtio drivers to obtain the UUID which identifies the underlying
> > > > > > > > exported object.
> > > > > > > >
> > > > > > > > Signed-off-by: David Stevens <[email protected]>
> > > > > > >
> > > > > > > Is this just for graphics? If yes I'd rather we put it in the graphics
> > > > > > > driver. We can always move it later ...
> > > > > >
> > > > > > As stated in the cover letter, this will be used by virtio-video.
> > > > > >
> > > > > > The proposed virtio-video patches: https://markmail.org/thread/p5d3k566srtdtute
> > > > > > The patch which imports these dma-bufs (slightly out of data, uses v3
> > > > > > of this patch set): https://markmail.org/thread/j4xlqaaim266qpks
> > > > > >
> > > > > > > > ---
> > > > > > > > drivers/virtio/Makefile | 2 +-
> > > > > > > > drivers/virtio/virtio.c | 6 +++
> > > > > > > > drivers/virtio/virtio_dma_buf.c | 89 +++++++++++++++++++++++++++++++++
> > > > > > > > include/linux/virtio.h | 1 +
> > > > > > > > include/linux/virtio_dma_buf.h | 58 +++++++++++++++++++++
> > > > > > > > 5 files changed, 155 insertions(+), 1 deletion(-)
> > > > > > > > create mode 100644 drivers/virtio/virtio_dma_buf.c
> > > > > > > > create mode 100644 include/linux/virtio_dma_buf.h
> > > > > > > >
> > > > > > > > diff --git a/drivers/virtio/Makefile b/drivers/virtio/Makefile
> > > > > > > > index 29a1386ecc03..ecdae5b596de 100644
> > > > > > > > --- a/drivers/virtio/Makefile
> > > > > > > > +++ b/drivers/virtio/Makefile
> > > > > > > > @@ -1,5 +1,5 @@
> > > > > > > > # SPDX-License-Identifier: GPL-2.0
> > > > > > > > -obj-$(CONFIG_VIRTIO) += virtio.o virtio_ring.o
> > > > > > > > +obj-$(CONFIG_VIRTIO) += virtio.o virtio_ring.o virtio_dma_buf.o
> > > > > > > > obj-$(CONFIG_VIRTIO_MMIO) += virtio_mmio.o
> > > > > > > > obj-$(CONFIG_VIRTIO_PCI) += virtio_pci.o
> > > > > > > > virtio_pci-y := virtio_pci_modern.o virtio_pci_common.o
> > > > > > > > diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c
> > > > > > > > index a977e32a88f2..5d46f0ded92d 100644
> > > > > > > > --- a/drivers/virtio/virtio.c
> > > > > > > > +++ b/drivers/virtio/virtio.c
> > > > > > > > @@ -357,6 +357,12 @@ int register_virtio_device(struct virtio_device *dev)
> > > > > > > > }
> > > > > > > > EXPORT_SYMBOL_GPL(register_virtio_device);
> > > > > > > >
> > > > > > > > +bool is_virtio_device(struct device *dev)
> > > > > > > > +{
> > > > > > > > + return dev->bus == &virtio_bus;
> > > > > > > > +}
> > > > > > > > +EXPORT_SYMBOL_GPL(is_virtio_device);
> > > > > > > > +
> > > > > > > > void unregister_virtio_device(struct virtio_device *dev)
> > > > > > > > {
> > > > > > > > int index = dev->index; /* save for after device release */
> > > > > > > > diff --git a/drivers/virtio/virtio_dma_buf.c b/drivers/virtio/virtio_dma_buf.c
> > > > > > > > new file mode 100644
> > > > > > > > index 000000000000..23e3399b11ed
> > > > > > > > --- /dev/null
> > > > > > > > +++ b/drivers/virtio/virtio_dma_buf.c
> > > > > > > > @@ -0,0 +1,89 @@
> > > > > > > > +// SPDX-License-Identifier: GPL-2.0-or-later
> > > > > > > > +/*
> > > > > > > > + * dma-bufs for virtio exported objects
> > > > > > > > + *
> > > > > > > > + * Copyright (C) 2020 Google, Inc.
> > > > > > > > + */
> > > > > > > > +
> > > > > > > > +#include <linux/virtio_dma_buf.h>
> > > > > > > > +
> > > > > > > > +/**
> > > > > > > > + * virtio_dma_buf_export - Creates a new dma-buf for a virtio exported object
> > > > > > > > + *
> > > > > > > > + * This wraps dma_buf_export() to allow virtio drivers to create a dma-buf
> > > > > > > > + * for an virtio exported object that can be queried by other virtio drivers
> > > > > > > > + * for the object's UUID.
> > > > > > > > + */
> > > > > > > > +struct dma_buf *virtio_dma_buf_export(
> > > > > > > > + const struct virtio_dma_buf_export_info *virtio_exp_info)
> > > > > > > > +{
> > > > > > > > + struct dma_buf_export_info exp_info;
> > > > > > > > +
> > > > > > > > + if (!virtio_exp_info->ops
> > > > > > > > + || virtio_exp_info->ops->ops.attach != &virtio_dma_buf_attach
> > > > > > > > + || !virtio_exp_info->ops->get_uuid) {
> > > > > > > > + return ERR_PTR(-EINVAL);
> > > > > > > > + }
> > > > > > > > +
> > > > > > > > + exp_info.exp_name = virtio_exp_info->exp_name;
> > > > > > > > + exp_info.owner = virtio_exp_info->owner;
> > > > > > > > + exp_info.ops = &virtio_exp_info->ops->ops;
> > > > > > > > + exp_info.size = virtio_exp_info->size;
> > > > > > > > + exp_info.flags = virtio_exp_info->flags;
> > > > > > > > + exp_info.resv = virtio_exp_info->resv;
> > > > > > > > + exp_info.priv = virtio_exp_info->priv;
> > > > > > > > + BUILD_BUG_ON(sizeof(struct virtio_dma_buf_export_info)
> > > > > > > > + != sizeof(struct dma_buf_export_info));
> > > > > > >
> > > > > > > This is the only part that gives me pause. Why do we need this hack?
> > > > > > > What's wrong with just using dma_buf_export_info directly,
> > > > > > > and if you want the virtio ops, just using container_off?
> > > > > >
> > > > > > This approach provides a more explicit type signature and a little
> > > > > > more type safety, I think. If others don't think it's a worthwhile
> > > > > > tradeoff, I can remove it.
> > > > > >
> > > > > > -David
> > > > >
> > > > > The cost is that if dma_buf_export_info changes even slightly, we get
> > > > > weird crashes.
> > > >
> > > > I'm not sure I understand what types of changes you're referring to.
> > > > As this is written, virtio-dma-buf is just another client of the
> > > > dma-buf API. If this were rewritten to use dma-buf directly, then
> > > > whatever code calls virtio_dma_buf_export would become a client of the
> > > > dma-buf API. If the semantics of existing fields in the dma-buf API
> > > > were changed and virtio-dma-buf wasn't updated, then yes, you could
> > > > get weird crashes from virtio-dma-buf.
> > > > However, the same problem would
> > > > exist if virtio_dma_buf_export used dma-buf directly - changes to
> > > > dma-buf's semantics could cause weird crashes if the caller of
> > > > virtio_dma_buf_export wasn't updated properly. The only potential
> > > > source of problems I see is if virtio_dma_buf_export_info wasn't
> > > > updated properly, but virtio_dma_buf_export_info is dead simple, so I
> > > > don't know if that's really a problem.
> > > >
> > > > -David
> > >
> > > I think you can get weird crashes if fields in dma buf are reordered, or
> > > if a field size changes. You have a build bug catching overall struct
> > > size changes but that can remain the same due do compiler padding or
> > > such.
> >
> > Since it's manually copying the fields instead of trying something
> > clever like memcpy, I don't see how reordering the fields or changing
> > the size of the fields would cause problems. Right now,
> > virtio_dma_buf_export is just a regular client of dma_buf_export, no
> > different than any of the other call sites in the kernel.
> >
> > Overall, I don't really think that this is a problem. If someone makes
> > breaking changes to the semantics of dma-buf, then they will need to
> > update this call site, just like they will need to update all of the
> > other call sites in the kernel. If someone adds new functionality to
> > dma-buf and adds another field to dma_buf_export_info, the build bug
> > is a reminder to add it to virtio_dma_buf_export_info. However, if the
> > struct padding happens to work out such that the build bug doesn't
> > trigger, that doesn't really matter - it just means that the new
> > dma-buf feature won't be exposed by virito-dma-buf until someone needs
> > it and notices that the new field is missing.
> >
> > -David
>
> Think about the reasons for the BUILD_BUG_ON being there, checking
> struct sizes like this is a clear sign of something strange going on.

Like I said, it's there as a reminder to update the virtio-dma-buf API
if the dma-buf API gets updated. Perhaps you could say it's a misuse
of BUILD_BUG_ON, since not updating virtio-dma-buf in such a situation
isn't a bug per se. If the BUILD_BUG_ON actually caught a real bug,
there would be a much more fundamental issue going on. The code is
doing nothing strange, nothing fundamentally different from any other
call such as in drm_gem_prime_export or udmabuf_create - it's just
setting fields in the dma_buf_export_info struct to values.

> But really this is just unnecessary complexity anyway.
>
> The only difference with dma_buf is get_uuid and device_attacj, isn't it?
>
> And they are called like this:
>
>
>
> + */
> +int virtio_dma_buf_get_uuid(struct dma_buf *dma_buf,
> + uuid_t *uuid)
> +{
> + const struct virtio_dma_buf_ops *ops = container_of(
> + dma_buf->ops, const struct virtio_dma_buf_ops, ops);
> +
> + if (!is_virtio_dma_buf(dma_buf))
> + return -EINVAL;
> +
> + return ops->get_uuid(dma_buf, uuid);
> +}
>
>
> So you are doing the container_of trick anyway, the extra structure
> did not give us any type safety.

Lack of type safety in one situation doesn't mean that type safety in
another situation isn't worthwhile. If that were the case, then why
does C have typedef? Why does Linux bother with types at all, since
you can cast anything to anything with strict aliasing disabled? We
can still make the virtio_dma_buf_export function more type-safe and
readable while still having some unavoidable casting.

But that being said, it's not worth further bikeshedding. I'll send
out an updated patch set.

-David

2020-06-18 21:18:08

by Guennadi Liakhovetski

[permalink] [raw]
Subject: Re: [PATCH v4 1/3] virtio: add dma-buf support for exported objects

Hi Michael,

On Thu, Jun 04, 2020 at 03:05:23PM -0400, Michael S. Tsirkin wrote:
> On Tue, May 26, 2020 at 07:58:09PM +0900, David Stevens wrote:
> > This change adds a new flavor of dma-bufs that can be used by virtio
> > drivers to share exported objects. A virtio dma-buf can be queried by
> > virtio drivers to obtain the UUID which identifies the underlying
> > exported object.
> >
> > Signed-off-by: David Stevens <[email protected]>
>
> Is this just for graphics? If yes I'd rather we put it in the graphics
> driver. We can always move it later ...

Wouldn't this be the API that audio virtualisation will have to use to share
buffers between the host and any guests?

Thanks
Guennadi

> > ---
> > drivers/virtio/Makefile | 2 +-
> > drivers/virtio/virtio.c | 6 +++
> > drivers/virtio/virtio_dma_buf.c | 89 +++++++++++++++++++++++++++++++++
> > include/linux/virtio.h | 1 +
> > include/linux/virtio_dma_buf.h | 58 +++++++++++++++++++++
> > 5 files changed, 155 insertions(+), 1 deletion(-)
> > create mode 100644 drivers/virtio/virtio_dma_buf.c
> > create mode 100644 include/linux/virtio_dma_buf.h
> >
> > diff --git a/drivers/virtio/Makefile b/drivers/virtio/Makefile
> > index 29a1386ecc03..ecdae5b596de 100644
> > --- a/drivers/virtio/Makefile
> > +++ b/drivers/virtio/Makefile
> > @@ -1,5 +1,5 @@
> > # SPDX-License-Identifier: GPL-2.0
> > -obj-$(CONFIG_VIRTIO) += virtio.o virtio_ring.o
> > +obj-$(CONFIG_VIRTIO) += virtio.o virtio_ring.o virtio_dma_buf.o
> > obj-$(CONFIG_VIRTIO_MMIO) += virtio_mmio.o
> > obj-$(CONFIG_VIRTIO_PCI) += virtio_pci.o
> > virtio_pci-y := virtio_pci_modern.o virtio_pci_common.o
> > diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c
> > index a977e32a88f2..5d46f0ded92d 100644
> > --- a/drivers/virtio/virtio.c
> > +++ b/drivers/virtio/virtio.c
> > @@ -357,6 +357,12 @@ int register_virtio_device(struct virtio_device *dev)
> > }
> > EXPORT_SYMBOL_GPL(register_virtio_device);
> >
> > +bool is_virtio_device(struct device *dev)
> > +{
> > + return dev->bus == &virtio_bus;
> > +}
> > +EXPORT_SYMBOL_GPL(is_virtio_device);
> > +
> > void unregister_virtio_device(struct virtio_device *dev)
> > {
> > int index = dev->index; /* save for after device release */
> > diff --git a/drivers/virtio/virtio_dma_buf.c b/drivers/virtio/virtio_dma_buf.c
> > new file mode 100644
> > index 000000000000..23e3399b11ed
> > --- /dev/null
> > +++ b/drivers/virtio/virtio_dma_buf.c
> > @@ -0,0 +1,89 @@
> > +// SPDX-License-Identifier: GPL-2.0-or-later
> > +/*
> > + * dma-bufs for virtio exported objects
> > + *
> > + * Copyright (C) 2020 Google, Inc.
> > + */
> > +
> > +#include <linux/virtio_dma_buf.h>
> > +
> > +/**
> > + * virtio_dma_buf_export - Creates a new dma-buf for a virtio exported object
> > + *
> > + * This wraps dma_buf_export() to allow virtio drivers to create a dma-buf
> > + * for an virtio exported object that can be queried by other virtio drivers
> > + * for the object's UUID.
> > + */
> > +struct dma_buf *virtio_dma_buf_export(
> > + const struct virtio_dma_buf_export_info *virtio_exp_info)
> > +{
> > + struct dma_buf_export_info exp_info;
> > +
> > + if (!virtio_exp_info->ops
> > + || virtio_exp_info->ops->ops.attach != &virtio_dma_buf_attach
> > + || !virtio_exp_info->ops->get_uuid) {
> > + return ERR_PTR(-EINVAL);
> > + }
> > +
> > + exp_info.exp_name = virtio_exp_info->exp_name;
> > + exp_info.owner = virtio_exp_info->owner;
> > + exp_info.ops = &virtio_exp_info->ops->ops;
> > + exp_info.size = virtio_exp_info->size;
> > + exp_info.flags = virtio_exp_info->flags;
> > + exp_info.resv = virtio_exp_info->resv;
> > + exp_info.priv = virtio_exp_info->priv;
> > + BUILD_BUG_ON(sizeof(struct virtio_dma_buf_export_info)
> > + != sizeof(struct dma_buf_export_info));
>
> This is the only part that gives me pause. Why do we need this hack?
> What's wrong with just using dma_buf_export_info directly,
> and if you want the virtio ops, just using container_off?
>
>
>
> > +
> > + return dma_buf_export(&exp_info);
> > +}
> > +EXPORT_SYMBOL(virtio_dma_buf_export);
> > +
> > +/**
> > + * virtio_dma_buf_attach - mandatory attach callback for virtio dma-bufs
> > + */
> > +int virtio_dma_buf_attach(struct dma_buf *dma_buf,
> > + struct dma_buf_attachment *attach)
> > +{
> > + int ret;
> > + const struct virtio_dma_buf_ops *ops = container_of(
> > + dma_buf->ops, const struct virtio_dma_buf_ops, ops);
> > +
> > + if (ops->device_attach) {
> > + ret = ops->device_attach(dma_buf, attach);
> > + if (ret)
> > + return ret;
> > + }
> > + return 0;
> > +}
> > +EXPORT_SYMBOL(virtio_dma_buf_attach);
> > +
> > +/**
> > + * is_virtio_dma_buf - returns true if the given dma-buf is a virtio dma-buf
> > + * @dma_buf: buffer to query
> > + */
> > +bool is_virtio_dma_buf(struct dma_buf *dma_buf)
> > +{
> > + return dma_buf->ops->attach == &virtio_dma_buf_attach;
> > +}
> > +EXPORT_SYMBOL(is_virtio_dma_buf);
> > +
> > +/**
> > + * virtio_dma_buf_get_uuid - gets the uuid of the virtio dma-buf's exported object
> > + * @dma_buf: [in] buffer to query
> > + * @uuid: [out] the uuid
> > + *
> > + * Returns: 0 on success, negative on failure.
> > + */
> > +int virtio_dma_buf_get_uuid(struct dma_buf *dma_buf,
> > + uuid_t *uuid)
> > +{
> > + const struct virtio_dma_buf_ops *ops = container_of(
> > + dma_buf->ops, const struct virtio_dma_buf_ops, ops);
> > +
> > + if (!is_virtio_dma_buf(dma_buf))
> > + return -EINVAL;
> > +
> > + return ops->get_uuid(dma_buf, uuid);
> > +}
> > +EXPORT_SYMBOL(virtio_dma_buf_get_uuid);
> > diff --git a/include/linux/virtio.h b/include/linux/virtio.h
> > index 15f906e4a748..9397e25616c4 100644
> > --- a/include/linux/virtio.h
> > +++ b/include/linux/virtio.h
> > @@ -128,6 +128,7 @@ static inline struct virtio_device *dev_to_virtio(struct device *_dev)
> > void virtio_add_status(struct virtio_device *dev, unsigned int status);
> > int register_virtio_device(struct virtio_device *dev);
> > void unregister_virtio_device(struct virtio_device *dev);
> > +bool is_virtio_device(struct device *dev);
> >
> > void virtio_break_device(struct virtio_device *dev);
> >
> > diff --git a/include/linux/virtio_dma_buf.h b/include/linux/virtio_dma_buf.h
> > new file mode 100644
> > index 000000000000..29fee167afbd
> > --- /dev/null
> > +++ b/include/linux/virtio_dma_buf.h
> > @@ -0,0 +1,58 @@
> > +/* SPDX-License-Identifier: GPL-2.0 */
> > +/*
> > + * dma-bufs for virtio exported objects
> > + *
> > + * Copyright (C) 2020 Google, Inc.
> > + */
> > +
> > +#ifndef _LINUX_VIRTIO_DMA_BUF_H
> > +#define _LINUX_VIRTIO_DMA_BUF_H
> > +
> > +#include <linux/dma-buf.h>
> > +#include <linux/uuid.h>
> > +#include <linux/virtio.h>
> > +
> > +/**
> > + * struct virtio_dma_buf_ops - operations possible on exported object dma-buf
> > + * @ops: the base dma_buf_ops. ops.attach MUST be virtio_dma_buf_attach.
> > + * @device_attach: [optional] callback invoked by virtio_dma_buf_attach during
> > + * all attach operations.
> > + * @get_uid: [required] callback to get the uuid of the exported object.
> > + */
> > +struct virtio_dma_buf_ops {
> > + struct dma_buf_ops ops;
> > + int (*device_attach)(struct dma_buf *dma_buf,
> > + struct dma_buf_attachment *attach);
> > + int (*get_uuid)(struct dma_buf *dma_buf, uuid_t *uuid);
> > +};
> > +
> > +/**
> > + * struct virtio_dma_buf_export_info - see struct dma_buf_export_info
> > + */
> > +struct virtio_dma_buf_export_info {
> > + const char *exp_name;
> > + struct module *owner;
> > + const struct virtio_dma_buf_ops *ops;
> > + size_t size;
> > + int flags;
> > + struct dma_resv *resv;
> > + void *priv;
> > +};
> > +
> > +/**
> > + * DEFINE_VIRTIO_DMA_BUF_EXPORT_INFO - helper macro for exporters
> > + */
> > +#define DEFINE_VIRTIO_DMA_BUF_EXPORT_INFO(name) \
> > + struct virtio_dma_buf_export_info name = { \
> > + .exp_name = KBUILD_MODNAME, \
> > + .owner = THIS_MODULE }
> > +
> > +int virtio_dma_buf_attach(struct dma_buf *dma_buf,
> > + struct dma_buf_attachment *attach);
> > +
> > +struct dma_buf *virtio_dma_buf_export(
> > + const struct virtio_dma_buf_export_info *virtio_exp_info);
> > +bool is_virtio_dma_buf(struct dma_buf *dma_buf);
> > +int virtio_dma_buf_get_uuid(struct dma_buf *dma_buf, uuid_t *uuid);
> > +
> > +#endif /* _LINUX_VIRTIO_DMA_BUF_H */
> > --
> > 2.27.0.rc0.183.gde8f92d652-goog
>
> _______________________________________________
> Virtualization mailing list
> [email protected]
> https://lists.linuxfoundation.org/mailman/listinfo/virtualization

2020-06-19 04:49:33

by David Stevens

[permalink] [raw]
Subject: Re: [PATCH v4 1/3] virtio: add dma-buf support for exported objects

On Thu, Jun 18, 2020 at 9:29 PM Guennadi Liakhovetski
<[email protected]> wrote:
>
> Hi Michael,
>
> On Thu, Jun 04, 2020 at 03:05:23PM -0400, Michael S. Tsirkin wrote:
> > On Tue, May 26, 2020 at 07:58:09PM +0900, David Stevens wrote:
> > > This change adds a new flavor of dma-bufs that can be used by virtio
> > > drivers to share exported objects. A virtio dma-buf can be queried by
> > > virtio drivers to obtain the UUID which identifies the underlying
> > > exported object.
> > >
> > > Signed-off-by: David Stevens <[email protected]>
> >
> > Is this just for graphics? If yes I'd rather we put it in the graphics
> > driver. We can always move it later ...
>
> Wouldn't this be the API that audio virtualisation will have to use to share
> buffers between the host and any guests?

The new flavor of dma-buf isn't directly related to sharing buffers
between the host and the guest. The purpose of this API is to help
share buffers between multiple virtio devices - e.g. share buffers
created by a virito-gpu device with a virito-video device. In
particular, the new flavor of dma-buf provides a mechanism to attach
identifying metadata to a dma-buf object that is shared between
different virtio drivers in a single guest. This identifying metadata
can then be passed to the importing device and used to fetch some
resource from the exporting device. But the new flavor of dma-buf is
an abstraction within the guest kernel, independent of the host-guest
boundary, and it's definitely not necessary if we're only talking
about a single virtio subsystem.

-David

> Thanks
> Guennadi
>
> > > ---
> > > drivers/virtio/Makefile | 2 +-
> > > drivers/virtio/virtio.c | 6 +++
> > > drivers/virtio/virtio_dma_buf.c | 89 +++++++++++++++++++++++++++++++++
> > > include/linux/virtio.h | 1 +
> > > include/linux/virtio_dma_buf.h | 58 +++++++++++++++++++++
> > > 5 files changed, 155 insertions(+), 1 deletion(-)
> > > create mode 100644 drivers/virtio/virtio_dma_buf.c
> > > create mode 100644 include/linux/virtio_dma_buf.h
> > >
> > > diff --git a/drivers/virtio/Makefile b/drivers/virtio/Makefile
> > > index 29a1386ecc03..ecdae5b596de 100644
> > > --- a/drivers/virtio/Makefile
> > > +++ b/drivers/virtio/Makefile
> > > @@ -1,5 +1,5 @@
> > > # SPDX-License-Identifier: GPL-2.0
> > > -obj-$(CONFIG_VIRTIO) += virtio.o virtio_ring.o
> > > +obj-$(CONFIG_VIRTIO) += virtio.o virtio_ring.o virtio_dma_buf.o
> > > obj-$(CONFIG_VIRTIO_MMIO) += virtio_mmio.o
> > > obj-$(CONFIG_VIRTIO_PCI) += virtio_pci.o
> > > virtio_pci-y := virtio_pci_modern.o virtio_pci_common.o
> > > diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c
> > > index a977e32a88f2..5d46f0ded92d 100644
> > > --- a/drivers/virtio/virtio.c
> > > +++ b/drivers/virtio/virtio.c
> > > @@ -357,6 +357,12 @@ int register_virtio_device(struct virtio_device *dev)
> > > }
> > > EXPORT_SYMBOL_GPL(register_virtio_device);
> > >
> > > +bool is_virtio_device(struct device *dev)
> > > +{
> > > + return dev->bus == &virtio_bus;
> > > +}
> > > +EXPORT_SYMBOL_GPL(is_virtio_device);
> > > +
> > > void unregister_virtio_device(struct virtio_device *dev)
> > > {
> > > int index = dev->index; /* save for after device release */
> > > diff --git a/drivers/virtio/virtio_dma_buf.c b/drivers/virtio/virtio_dma_buf.c
> > > new file mode 100644
> > > index 000000000000..23e3399b11ed
> > > --- /dev/null
> > > +++ b/drivers/virtio/virtio_dma_buf.c
> > > @@ -0,0 +1,89 @@
> > > +// SPDX-License-Identifier: GPL-2.0-or-later
> > > +/*
> > > + * dma-bufs for virtio exported objects
> > > + *
> > > + * Copyright (C) 2020 Google, Inc.
> > > + */
> > > +
> > > +#include <linux/virtio_dma_buf.h>
> > > +
> > > +/**
> > > + * virtio_dma_buf_export - Creates a new dma-buf for a virtio exported object
> > > + *
> > > + * This wraps dma_buf_export() to allow virtio drivers to create a dma-buf
> > > + * for an virtio exported object that can be queried by other virtio drivers
> > > + * for the object's UUID.
> > > + */
> > > +struct dma_buf *virtio_dma_buf_export(
> > > + const struct virtio_dma_buf_export_info *virtio_exp_info)
> > > +{
> > > + struct dma_buf_export_info exp_info;
> > > +
> > > + if (!virtio_exp_info->ops
> > > + || virtio_exp_info->ops->ops.attach != &virtio_dma_buf_attach
> > > + || !virtio_exp_info->ops->get_uuid) {
> > > + return ERR_PTR(-EINVAL);
> > > + }
> > > +
> > > + exp_info.exp_name = virtio_exp_info->exp_name;
> > > + exp_info.owner = virtio_exp_info->owner;
> > > + exp_info.ops = &virtio_exp_info->ops->ops;
> > > + exp_info.size = virtio_exp_info->size;
> > > + exp_info.flags = virtio_exp_info->flags;
> > > + exp_info.resv = virtio_exp_info->resv;
> > > + exp_info.priv = virtio_exp_info->priv;
> > > + BUILD_BUG_ON(sizeof(struct virtio_dma_buf_export_info)
> > > + != sizeof(struct dma_buf_export_info));
> >
> > This is the only part that gives me pause. Why do we need this hack?
> > What's wrong with just using dma_buf_export_info directly,
> > and if you want the virtio ops, just using container_off?
> >
> >
> >
> > > +
> > > + return dma_buf_export(&exp_info);
> > > +}
> > > +EXPORT_SYMBOL(virtio_dma_buf_export);
> > > +
> > > +/**
> > > + * virtio_dma_buf_attach - mandatory attach callback for virtio dma-bufs
> > > + */
> > > +int virtio_dma_buf_attach(struct dma_buf *dma_buf,
> > > + struct dma_buf_attachment *attach)
> > > +{
> > > + int ret;
> > > + const struct virtio_dma_buf_ops *ops = container_of(
> > > + dma_buf->ops, const struct virtio_dma_buf_ops, ops);
> > > +
> > > + if (ops->device_attach) {
> > > + ret = ops->device_attach(dma_buf, attach);
> > > + if (ret)
> > > + return ret;
> > > + }
> > > + return 0;
> > > +}
> > > +EXPORT_SYMBOL(virtio_dma_buf_attach);
> > > +
> > > +/**
> > > + * is_virtio_dma_buf - returns true if the given dma-buf is a virtio dma-buf
> > > + * @dma_buf: buffer to query
> > > + */
> > > +bool is_virtio_dma_buf(struct dma_buf *dma_buf)
> > > +{
> > > + return dma_buf->ops->attach == &virtio_dma_buf_attach;
> > > +}
> > > +EXPORT_SYMBOL(is_virtio_dma_buf);
> > > +
> > > +/**
> > > + * virtio_dma_buf_get_uuid - gets the uuid of the virtio dma-buf's exported object
> > > + * @dma_buf: [in] buffer to query
> > > + * @uuid: [out] the uuid
> > > + *
> > > + * Returns: 0 on success, negative on failure.
> > > + */
> > > +int virtio_dma_buf_get_uuid(struct dma_buf *dma_buf,
> > > + uuid_t *uuid)
> > > +{
> > > + const struct virtio_dma_buf_ops *ops = container_of(
> > > + dma_buf->ops, const struct virtio_dma_buf_ops, ops);
> > > +
> > > + if (!is_virtio_dma_buf(dma_buf))
> > > + return -EINVAL;
> > > +
> > > + return ops->get_uuid(dma_buf, uuid);
> > > +}
> > > +EXPORT_SYMBOL(virtio_dma_buf_get_uuid);
> > > diff --git a/include/linux/virtio.h b/include/linux/virtio.h
> > > index 15f906e4a748..9397e25616c4 100644
> > > --- a/include/linux/virtio.h
> > > +++ b/include/linux/virtio.h
> > > @@ -128,6 +128,7 @@ static inline struct virtio_device *dev_to_virtio(struct device *_dev)
> > > void virtio_add_status(struct virtio_device *dev, unsigned int status);
> > > int register_virtio_device(struct virtio_device *dev);
> > > void unregister_virtio_device(struct virtio_device *dev);
> > > +bool is_virtio_device(struct device *dev);
> > >
> > > void virtio_break_device(struct virtio_device *dev);
> > >
> > > diff --git a/include/linux/virtio_dma_buf.h b/include/linux/virtio_dma_buf.h
> > > new file mode 100644
> > > index 000000000000..29fee167afbd
> > > --- /dev/null
> > > +++ b/include/linux/virtio_dma_buf.h
> > > @@ -0,0 +1,58 @@
> > > +/* SPDX-License-Identifier: GPL-2.0 */
> > > +/*
> > > + * dma-bufs for virtio exported objects
> > > + *
> > > + * Copyright (C) 2020 Google, Inc.
> > > + */
> > > +
> > > +#ifndef _LINUX_VIRTIO_DMA_BUF_H
> > > +#define _LINUX_VIRTIO_DMA_BUF_H
> > > +
> > > +#include <linux/dma-buf.h>
> > > +#include <linux/uuid.h>
> > > +#include <linux/virtio.h>
> > > +
> > > +/**
> > > + * struct virtio_dma_buf_ops - operations possible on exported object dma-buf
> > > + * @ops: the base dma_buf_ops. ops.attach MUST be virtio_dma_buf_attach.
> > > + * @device_attach: [optional] callback invoked by virtio_dma_buf_attach during
> > > + * all attach operations.
> > > + * @get_uid: [required] callback to get the uuid of the exported object.
> > > + */
> > > +struct virtio_dma_buf_ops {
> > > + struct dma_buf_ops ops;
> > > + int (*device_attach)(struct dma_buf *dma_buf,
> > > + struct dma_buf_attachment *attach);
> > > + int (*get_uuid)(struct dma_buf *dma_buf, uuid_t *uuid);
> > > +};
> > > +
> > > +/**
> > > + * struct virtio_dma_buf_export_info - see struct dma_buf_export_info
> > > + */
> > > +struct virtio_dma_buf_export_info {
> > > + const char *exp_name;
> > > + struct module *owner;
> > > + const struct virtio_dma_buf_ops *ops;
> > > + size_t size;
> > > + int flags;
> > > + struct dma_resv *resv;
> > > + void *priv;
> > > +};
> > > +
> > > +/**
> > > + * DEFINE_VIRTIO_DMA_BUF_EXPORT_INFO - helper macro for exporters
> > > + */
> > > +#define DEFINE_VIRTIO_DMA_BUF_EXPORT_INFO(name) \
> > > + struct virtio_dma_buf_export_info name = { \
> > > + .exp_name = KBUILD_MODNAME, \
> > > + .owner = THIS_MODULE }
> > > +
> > > +int virtio_dma_buf_attach(struct dma_buf *dma_buf,
> > > + struct dma_buf_attachment *attach);
> > > +
> > > +struct dma_buf *virtio_dma_buf_export(
> > > + const struct virtio_dma_buf_export_info *virtio_exp_info);
> > > +bool is_virtio_dma_buf(struct dma_buf *dma_buf);
> > > +int virtio_dma_buf_get_uuid(struct dma_buf *dma_buf, uuid_t *uuid);
> > > +
> > > +#endif /* _LINUX_VIRTIO_DMA_BUF_H */
> > > --
> > > 2.27.0.rc0.183.gde8f92d652-goog
> >
> > _______________________________________________
> > Virtualization mailing list
> > [email protected]
> > https://lists.linuxfoundation.org/mailman/listinfo/virtualization

2020-06-19 06:56:07

by Guennadi Liakhovetski

[permalink] [raw]
Subject: Re: [PATCH v4 1/3] virtio: add dma-buf support for exported objects

Hi David,

On Fri, Jun 19, 2020 at 10:57:37AM +0900, David Stevens wrote:
> On Thu, Jun 18, 2020 at 9:29 PM Guennadi Liakhovetski
> <[email protected]> wrote:
> >
> > Hi Michael,
> >
> > On Thu, Jun 04, 2020 at 03:05:23PM -0400, Michael S. Tsirkin wrote:
> > > On Tue, May 26, 2020 at 07:58:09PM +0900, David Stevens wrote:
> > > > This change adds a new flavor of dma-bufs that can be used by virtio
> > > > drivers to share exported objects. A virtio dma-buf can be queried by
> > > > virtio drivers to obtain the UUID which identifies the underlying
> > > > exported object.
> > > >
> > > > Signed-off-by: David Stevens <[email protected]>
> > >
> > > Is this just for graphics? If yes I'd rather we put it in the graphics
> > > driver. We can always move it later ...
> >
> > Wouldn't this be the API that audio virtualisation will have to use to share
> > buffers between the host and any guests?
>
> The new flavor of dma-buf isn't directly related to sharing buffers
> between the host and the guest. The purpose of this API is to help
> share buffers between multiple virtio devices - e.g. share buffers
> created by a virito-gpu device with a virito-video device. In
> particular, the new flavor of dma-buf provides a mechanism to attach
> identifying metadata to a dma-buf object that is shared between
> different virtio drivers in a single guest. This identifying metadata
> can then be passed to the importing device and used to fetch some
> resource from the exporting device. But the new flavor of dma-buf is
> an abstraction within the guest kernel, independent of the host-guest
> boundary, and it's definitely not necessary if we're only talking
> about a single virtio subsystem.

Thanks for the explanation!

Regards
Guennadi

> > > > ---
> > > > drivers/virtio/Makefile | 2 +-
> > > > drivers/virtio/virtio.c | 6 +++
> > > > drivers/virtio/virtio_dma_buf.c | 89 +++++++++++++++++++++++++++++++++
> > > > include/linux/virtio.h | 1 +
> > > > include/linux/virtio_dma_buf.h | 58 +++++++++++++++++++++
> > > > 5 files changed, 155 insertions(+), 1 deletion(-)
> > > > create mode 100644 drivers/virtio/virtio_dma_buf.c
> > > > create mode 100644 include/linux/virtio_dma_buf.h
> > > >
> > > > diff --git a/drivers/virtio/Makefile b/drivers/virtio/Makefile
> > > > index 29a1386ecc03..ecdae5b596de 100644
> > > > --- a/drivers/virtio/Makefile
> > > > +++ b/drivers/virtio/Makefile
> > > > @@ -1,5 +1,5 @@
> > > > # SPDX-License-Identifier: GPL-2.0
> > > > -obj-$(CONFIG_VIRTIO) += virtio.o virtio_ring.o
> > > > +obj-$(CONFIG_VIRTIO) += virtio.o virtio_ring.o virtio_dma_buf.o
> > > > obj-$(CONFIG_VIRTIO_MMIO) += virtio_mmio.o
> > > > obj-$(CONFIG_VIRTIO_PCI) += virtio_pci.o
> > > > virtio_pci-y := virtio_pci_modern.o virtio_pci_common.o
> > > > diff --git a/drivers/virtio/virtio.c b/drivers/virtio/virtio.c
> > > > index a977e32a88f2..5d46f0ded92d 100644
> > > > --- a/drivers/virtio/virtio.c
> > > > +++ b/drivers/virtio/virtio.c
> > > > @@ -357,6 +357,12 @@ int register_virtio_device(struct virtio_device *dev)
> > > > }
> > > > EXPORT_SYMBOL_GPL(register_virtio_device);
> > > >
> > > > +bool is_virtio_device(struct device *dev)
> > > > +{
> > > > + return dev->bus == &virtio_bus;
> > > > +}
> > > > +EXPORT_SYMBOL_GPL(is_virtio_device);
> > > > +
> > > > void unregister_virtio_device(struct virtio_device *dev)
> > > > {
> > > > int index = dev->index; /* save for after device release */
> > > > diff --git a/drivers/virtio/virtio_dma_buf.c b/drivers/virtio/virtio_dma_buf.c
> > > > new file mode 100644
> > > > index 000000000000..23e3399b11ed
> > > > --- /dev/null
> > > > +++ b/drivers/virtio/virtio_dma_buf.c
> > > > @@ -0,0 +1,89 @@
> > > > +// SPDX-License-Identifier: GPL-2.0-or-later
> > > > +/*
> > > > + * dma-bufs for virtio exported objects
> > > > + *
> > > > + * Copyright (C) 2020 Google, Inc.
> > > > + */
> > > > +
> > > > +#include <linux/virtio_dma_buf.h>
> > > > +
> > > > +/**
> > > > + * virtio_dma_buf_export - Creates a new dma-buf for a virtio exported object
> > > > + *
> > > > + * This wraps dma_buf_export() to allow virtio drivers to create a dma-buf
> > > > + * for an virtio exported object that can be queried by other virtio drivers
> > > > + * for the object's UUID.
> > > > + */
> > > > +struct dma_buf *virtio_dma_buf_export(
> > > > + const struct virtio_dma_buf_export_info *virtio_exp_info)
> > > > +{
> > > > + struct dma_buf_export_info exp_info;
> > > > +
> > > > + if (!virtio_exp_info->ops
> > > > + || virtio_exp_info->ops->ops.attach != &virtio_dma_buf_attach
> > > > + || !virtio_exp_info->ops->get_uuid) {
> > > > + return ERR_PTR(-EINVAL);
> > > > + }
> > > > +
> > > > + exp_info.exp_name = virtio_exp_info->exp_name;
> > > > + exp_info.owner = virtio_exp_info->owner;
> > > > + exp_info.ops = &virtio_exp_info->ops->ops;
> > > > + exp_info.size = virtio_exp_info->size;
> > > > + exp_info.flags = virtio_exp_info->flags;
> > > > + exp_info.resv = virtio_exp_info->resv;
> > > > + exp_info.priv = virtio_exp_info->priv;
> > > > + BUILD_BUG_ON(sizeof(struct virtio_dma_buf_export_info)
> > > > + != sizeof(struct dma_buf_export_info));
> > >
> > > This is the only part that gives me pause. Why do we need this hack?
> > > What's wrong with just using dma_buf_export_info directly,
> > > and if you want the virtio ops, just using container_off?
> > >
> > >
> > >
> > > > +
> > > > + return dma_buf_export(&exp_info);
> > > > +}
> > > > +EXPORT_SYMBOL(virtio_dma_buf_export);
> > > > +
> > > > +/**
> > > > + * virtio_dma_buf_attach - mandatory attach callback for virtio dma-bufs
> > > > + */
> > > > +int virtio_dma_buf_attach(struct dma_buf *dma_buf,
> > > > + struct dma_buf_attachment *attach)
> > > > +{
> > > > + int ret;
> > > > + const struct virtio_dma_buf_ops *ops = container_of(
> > > > + dma_buf->ops, const struct virtio_dma_buf_ops, ops);
> > > > +
> > > > + if (ops->device_attach) {
> > > > + ret = ops->device_attach(dma_buf, attach);
> > > > + if (ret)
> > > > + return ret;
> > > > + }
> > > > + return 0;
> > > > +}
> > > > +EXPORT_SYMBOL(virtio_dma_buf_attach);
> > > > +
> > > > +/**
> > > > + * is_virtio_dma_buf - returns true if the given dma-buf is a virtio dma-buf
> > > > + * @dma_buf: buffer to query
> > > > + */
> > > > +bool is_virtio_dma_buf(struct dma_buf *dma_buf)
> > > > +{
> > > > + return dma_buf->ops->attach == &virtio_dma_buf_attach;
> > > > +}
> > > > +EXPORT_SYMBOL(is_virtio_dma_buf);
> > > > +
> > > > +/**
> > > > + * virtio_dma_buf_get_uuid - gets the uuid of the virtio dma-buf's exported object
> > > > + * @dma_buf: [in] buffer to query
> > > > + * @uuid: [out] the uuid
> > > > + *
> > > > + * Returns: 0 on success, negative on failure.
> > > > + */
> > > > +int virtio_dma_buf_get_uuid(struct dma_buf *dma_buf,
> > > > + uuid_t *uuid)
> > > > +{
> > > > + const struct virtio_dma_buf_ops *ops = container_of(
> > > > + dma_buf->ops, const struct virtio_dma_buf_ops, ops);
> > > > +
> > > > + if (!is_virtio_dma_buf(dma_buf))
> > > > + return -EINVAL;
> > > > +
> > > > + return ops->get_uuid(dma_buf, uuid);
> > > > +}
> > > > +EXPORT_SYMBOL(virtio_dma_buf_get_uuid);
> > > > diff --git a/include/linux/virtio.h b/include/linux/virtio.h
> > > > index 15f906e4a748..9397e25616c4 100644
> > > > --- a/include/linux/virtio.h
> > > > +++ b/include/linux/virtio.h
> > > > @@ -128,6 +128,7 @@ static inline struct virtio_device *dev_to_virtio(struct device *_dev)
> > > > void virtio_add_status(struct virtio_device *dev, unsigned int status);
> > > > int register_virtio_device(struct virtio_device *dev);
> > > > void unregister_virtio_device(struct virtio_device *dev);
> > > > +bool is_virtio_device(struct device *dev);
> > > >
> > > > void virtio_break_device(struct virtio_device *dev);
> > > >
> > > > diff --git a/include/linux/virtio_dma_buf.h b/include/linux/virtio_dma_buf.h
> > > > new file mode 100644
> > > > index 000000000000..29fee167afbd
> > > > --- /dev/null
> > > > +++ b/include/linux/virtio_dma_buf.h
> > > > @@ -0,0 +1,58 @@
> > > > +/* SPDX-License-Identifier: GPL-2.0 */
> > > > +/*
> > > > + * dma-bufs for virtio exported objects
> > > > + *
> > > > + * Copyright (C) 2020 Google, Inc.
> > > > + */
> > > > +
> > > > +#ifndef _LINUX_VIRTIO_DMA_BUF_H
> > > > +#define _LINUX_VIRTIO_DMA_BUF_H
> > > > +
> > > > +#include <linux/dma-buf.h>
> > > > +#include <linux/uuid.h>
> > > > +#include <linux/virtio.h>
> > > > +
> > > > +/**
> > > > + * struct virtio_dma_buf_ops - operations possible on exported object dma-buf
> > > > + * @ops: the base dma_buf_ops. ops.attach MUST be virtio_dma_buf_attach.
> > > > + * @device_attach: [optional] callback invoked by virtio_dma_buf_attach during
> > > > + * all attach operations.
> > > > + * @get_uid: [required] callback to get the uuid of the exported object.
> > > > + */
> > > > +struct virtio_dma_buf_ops {
> > > > + struct dma_buf_ops ops;
> > > > + int (*device_attach)(struct dma_buf *dma_buf,
> > > > + struct dma_buf_attachment *attach);
> > > > + int (*get_uuid)(struct dma_buf *dma_buf, uuid_t *uuid);
> > > > +};
> > > > +
> > > > +/**
> > > > + * struct virtio_dma_buf_export_info - see struct dma_buf_export_info
> > > > + */
> > > > +struct virtio_dma_buf_export_info {
> > > > + const char *exp_name;
> > > > + struct module *owner;
> > > > + const struct virtio_dma_buf_ops *ops;
> > > > + size_t size;
> > > > + int flags;
> > > > + struct dma_resv *resv;
> > > > + void *priv;
> > > > +};
> > > > +
> > > > +/**
> > > > + * DEFINE_VIRTIO_DMA_BUF_EXPORT_INFO - helper macro for exporters
> > > > + */
> > > > +#define DEFINE_VIRTIO_DMA_BUF_EXPORT_INFO(name) \
> > > > + struct virtio_dma_buf_export_info name = { \
> > > > + .exp_name = KBUILD_MODNAME, \
> > > > + .owner = THIS_MODULE }
> > > > +
> > > > +int virtio_dma_buf_attach(struct dma_buf *dma_buf,
> > > > + struct dma_buf_attachment *attach);
> > > > +
> > > > +struct dma_buf *virtio_dma_buf_export(
> > > > + const struct virtio_dma_buf_export_info *virtio_exp_info);
> > > > +bool is_virtio_dma_buf(struct dma_buf *dma_buf);
> > > > +int virtio_dma_buf_get_uuid(struct dma_buf *dma_buf, uuid_t *uuid);
> > > > +
> > > > +#endif /* _LINUX_VIRTIO_DMA_BUF_H */
> > > > --
> > > > 2.27.0.rc0.183.gde8f92d652-goog
> > >
> > > _______________________________________________
> > > Virtualization mailing list
> > > [email protected]
> > > https://lists.linuxfoundation.org/mailman/listinfo/virtualization