2020-06-23 22:51:25

by Konrad Dybcio

Subject: [PATCH v2 02/12] arm64: dts: qcom: msm8994: Add SPMI PMIC arbiter device

Add SPMI PMIC arbiter device to communicate with PMICs
attached to SPMI bus.

Signed-off-by: Konrad Dybcio <[email protected]>
---
arch/arm64/boot/dts/qcom/msm8994.dtsi | 16 ++++++++++++++++
1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi
index 79e6e46798c8..23e50c30669b 100644
--- a/arch/arm64/boot/dts/qcom/msm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi
@@ -169,6 +169,22 @@ restart@fc4ab000 {
reg = <0xfc4ab000 0x4>;
};

+ spmi_bus: spmi@fc4c0000 {
+ compatible = "qcom,spmi-pmic-arb";
+ reg = <0xfc4cf000 0x1000>,
+ <0xfc4cb000 0x1000>,
+ <0xfc4ca000 0x1000>;
+ reg-names = "core", "intr", "cnfg";
+ interrupt-names = "periph_irq";
+ interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
+ qcom,ee = <0>;
+ qcom,channel = <0>;
+ #address-cells = <2>;
+ #size-cells = <0>;
+ interrupt-controller;
+ #interrupt-cells = <4>;
+ };
+
tcsr_mutex_regs: syscon@fd484000 {
compatible = "syscon";
reg = <0xfd484000 0x2000>;
--
2.27.0

2020-06-23 23:20:17

by Bjorn Andersson

Subject: Re: [PATCH v2 02/12] arm64: dts: qcom: msm8994: Add SPMI PMIC arbiter device

On Tue 23 Jun 15:48 PDT 2020, Konrad Dybcio wrote:

> Add SPMI PMIC arbiter device to communicate with PMICs
> attached to SPMI bus.
>
> Signed-off-by: Konrad Dybcio <[email protected]>

Applied, thanks

> ---
> arch/arm64/boot/dts/qcom/msm8994.dtsi | 16 ++++++++++++++++
> 1 file changed, 16 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi
> index 79e6e46798c8..23e50c30669b 100644
> --- a/arch/arm64/boot/dts/qcom/msm8994.dtsi
> +++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi
> @@ -169,6 +169,22 @@ restart@fc4ab000 {
> reg = <0xfc4ab000 0x4>;
> };
>
> + spmi_bus: spmi@fc4c0000 {
> + compatible = "qcom,spmi-pmic-arb";
> + reg = <0xfc4cf000 0x1000>,
> + <0xfc4cb000 0x1000>,
> + <0xfc4ca000 0x1000>;
> + reg-names = "core", "intr", "cnfg";
> + interrupt-names = "periph_irq";
> + interrupts = <GIC_SPI 190 IRQ_TYPE_LEVEL_HIGH>;
> + qcom,ee = <0>;
> + qcom,channel = <0>;
> + #address-cells = <2>;
> + #size-cells = <0>;
> + interrupt-controller;
> + #interrupt-cells = <4>;
> + };
> +
> tcsr_mutex_regs: syscon@fd484000 {
> compatible = "syscon";
> reg = <0xfd484000 0x2000>;
> --
> 2.27.0
>