Add properties required for the bootloader to select
the correct bootloader blob. They have been removed from
the SoC device tree as they should be set on a per-device
basis.
Signed-off-by: Konrad Dybcio <[email protected]>
---
arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts
index a5f9a6ab512c..baa55643b40f 100644
--- a/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts
+++ b/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts
@@ -11,6 +11,8 @@ / {
model = "Huawei Nexus 6P";
compatible = "huawei,angler", "qcom,msm8994";
/* required for bootloader to select correct board */
+ qcom,msm-id = <207 0x20000>;
+ qcom,pmic-id = <0x10009 0x1000A 0x0 0x0>;
qcom,board-id = <8026 0>;
aliases {
--
2.27.0
On Tue 23 Jun 15:48 PDT 2020, Konrad Dybcio wrote:
> Add properties required for the bootloader to select
> the correct bootloader blob. They have been removed from
> the SoC device tree as they should be set on a per-device
> basis.
>
> Signed-off-by: Konrad Dybcio <[email protected]>
Applied, thanks.
> ---
> arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts
> index a5f9a6ab512c..baa55643b40f 100644
> --- a/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts
> +++ b/arch/arm64/boot/dts/qcom/msm8994-angler-rev-101.dts
> @@ -11,6 +11,8 @@ / {
> model = "Huawei Nexus 6P";
> compatible = "huawei,angler", "qcom,msm8994";
> /* required for bootloader to select correct board */
> + qcom,msm-id = <207 0x20000>;
> + qcom,pmic-id = <0x10009 0x1000A 0x0 0x0>;
> qcom,board-id = <8026 0>;
>
> aliases {
> --
> 2.27.0
>