changes since v2:
- drop applied patches
- add msm8994 SCM compat and binding
- declare regulators in device DTs
- make APCS a mailbox
Konrad Dybcio (8):
firmware: qcom_scm: Add msm8994 compatible
arm64: dts: qcom: msm8994: Add SCM node
arm64: dts: qcom: msm8992: Add a label to rpm-requests
arm64: dts: qcom: msm8992: Remove regulators from SoC DTSI
mailbox: qcom: Add msm8994 apcs compatible
arm64: dts: qcom: msm8994: Add support for SMD RPM
arm64: dts: qcom: Move msm8994-smd-rpm contents to lg-bullhead.
arm64: dts: qcom: Add support for Sony Xperia Z5 (SoMC Sumire-RoW)
.../devicetree/bindings/firmware/qcom,scm.txt | 1 +
.../mailbox/qcom,apcs-kpss-global.yaml | 1 +
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../dts/qcom/msm8992-bullhead-rev-101.dts | 225 ++++++++++++++-
arch/arm64/boot/dts/qcom/msm8992.dtsi | 48 +---
arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi | 268 ------------------
.../msm8994-sony-xperia-kitakami-sumire.dts | 13 +
.../qcom/msm8994-sony-xperia-kitakami.dtsi | 235 +++++++++++++++
arch/arm64/boot/dts/qcom/msm8994.dtsi | 49 ++++
drivers/firmware/qcom_scm.c | 1 +
drivers/mailbox/qcom-apcs-ipc-mailbox.c | 5 +
11 files changed, 531 insertions(+), 316 deletions(-)
delete mode 100644 arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi
create mode 100644 arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts
create mode 100644 arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
--
2.27.0
This change adds a compatible for msm8994,
which requires no additional clocks for
scm to probe correctly.
Signed-off-by: Konrad Dybcio <[email protected]>
---
Documentation/devicetree/bindings/firmware/qcom,scm.txt | 1 +
drivers/firmware/qcom_scm.c | 1 +
2 files changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/firmware/qcom,scm.txt b/Documentation/devicetree/bindings/firmware/qcom,scm.txt
index 354b448fc0c3..898831d170bc 100644
--- a/Documentation/devicetree/bindings/firmware/qcom,scm.txt
+++ b/Documentation/devicetree/bindings/firmware/qcom,scm.txt
@@ -15,6 +15,7 @@ Required properties:
* "qcom,scm-msm8916"
* "qcom,scm-msm8960"
* "qcom,scm-msm8974"
+ * "qcom,scm-msm8994"
* "qcom,scm-msm8996"
* "qcom,scm-msm8998"
* "qcom,scm-sc7180"
diff --git a/drivers/firmware/qcom_scm.c b/drivers/firmware/qcom_scm.c
index 0e7233a20f34..008b3a08fb15 100644
--- a/drivers/firmware/qcom_scm.c
+++ b/drivers/firmware/qcom_scm.c
@@ -1151,6 +1151,7 @@ static const struct of_device_id qcom_scm_dt_match[] = {
SCM_HAS_IFACE_CLK |
SCM_HAS_BUS_CLK)
},
+ { .compatible = "qcom,scm-msm8994" },
{ .compatible = "qcom,scm-msm8996" },
{ .compatible = "qcom,scm" },
{}
--
2.27.0
Signed-off-by: Konrad Dybcio <[email protected]>
---
arch/arm64/boot/dts/qcom/msm8994.dtsi | 6 ++++++
1 file changed, 6 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi
index 9ae848442d0b..bf5aa7308b63 100644
--- a/arch/arm64/boot/dts/qcom/msm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi
@@ -142,6 +142,12 @@ core3 {
};
};
+ firmware {
+ scm {
+ compatible = "qcom,scm-msm8994", "qcom,scm";
+ };
+ };
+
memory {
device_type = "memory";
/* We expect the bootloader to fill in the reg */
--
2.27.0
This is now considered obsolete practice.
Signed-off-by: Konrad Dybcio <[email protected]>
---
arch/arm64/boot/dts/qcom/msm8992.dtsi | 46 ---------------------------
1 file changed, 46 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi
index 8e5a3ae79997..d41ba1ef687a 100644
--- a/arch/arm64/boot/dts/qcom/msm8992.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi
@@ -261,52 +261,6 @@ rpm {
rpm_requests: rpm-requests {
compatible = "qcom,rpm-msm8994";
qcom,smd-channels = "rpm_requests";
-
- pm8994-regulators {
- compatible = "qcom,rpm-pm8994-regulators";
-
- pm8994_s1: s1 {};
- pm8994_s2: s2 {};
- pm8994_s3: s3 {};
- pm8994_s4: s4 {};
- pm8994_s5: s5 {};
- pm8994_s6: s6 {};
- pm8994_s7: s7 {};
-
- pm8994_l1: l1 {};
- pm8994_l2: l2 {};
- pm8994_l3: l3 {};
- pm8994_l4: l4 {};
- pm8994_l6: l6 {};
- pm8994_l8: l8 {};
- pm8994_l9: l9 {};
- pm8994_l10: l10 {};
- pm8994_l11: l11 {};
- pm8994_l12: l12 {};
- pm8994_l13: l13 {};
- pm8994_l14: l14 {};
- pm8994_l15: l15 {};
- pm8994_l16: l16 {};
- pm8994_l17: l17 {};
- pm8994_l18: l18 {};
- pm8994_l19: l19 {};
- pm8994_l20: l20 {};
- pm8994_l21: l21 {};
- pm8994_l22: l22 {};
- pm8994_l23: l23 {};
- pm8994_l24: l24 {};
- pm8994_l25: l25 {};
- pm8994_l26: l26 {};
- pm8994_l27: l27 {};
- pm8994_l28: l28 {};
- pm8994_l29: l29 {};
- pm8994_l30: l30 {};
- pm8994_l31: l31 {};
- pm8994_l32: l32 {};
-
- pm8994_lvs1: lvs1 {};
- pm8994_lvs2: lvs2 {};
- };
};
};
};
--
2.27.0
This was the only device using that dtsi, so no point
keeping it separate AND with a confusing name (bullhead
is based on msm8992 and the file contains regulator
values for that specific board).
Signed-off-by: Konrad Dybcio <[email protected]>
---
.../dts/qcom/msm8992-bullhead-rev-101.dts | 225 ++++++++++++++-
arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi | 268 ------------------
2 files changed, 224 insertions(+), 269 deletions(-)
delete mode 100644 arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi
diff --git a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
index 32670d5afdd6..a2de69292d28 100644
--- a/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
+++ b/arch/arm64/boot/dts/qcom/msm8992-bullhead-rev-101.dts
@@ -47,4 +47,227 @@ ramoops@1ff00000 {
};
};
-#include "msm8994-smd-rpm.dtsi"
+&rpm_requests {
+ pm8994-regulators {
+ compatible = "qcom,rpm-pm8994-regulators";
+
+ vdd_l1-supply = <&pm8994_s1>;
+ vdd_l2_26_28-supply = <&pm8994_s3>;
+ vdd_l3_11-supply = <&pm8994_s3>;
+ vdd_l4_27_31-supply = <&pm8994_s3>;
+ vdd_l5_7-supply = <&pm8994_s3>;
+ vdd_l6_12_32-supply = <&pm8994_s5>;
+ vdd_l8_16_30-supply = <&vreg_vph_pwr>;
+ vdd_l9_10_18_22-supply = <&vreg_vph_pwr>;
+ vdd_l13_19_23_24-supply = <&vreg_vph_pwr>;
+ vdd_l14_15-supply = <&pm8994_s5>;
+ vdd_l17_29-supply = <&vreg_vph_pwr>;
+ vdd_l20_21-supply = <&vreg_vph_pwr>;
+ vdd_l25-supply = <&pm8994_s5>;
+ vdd_lvs1_2 = <&pm8994_s4>;
+
+ pm8994_s1: s1 {
+ regulator-min-microvolt = <800000>;
+ regulator-max-microvolt = <800000>;
+ };
+
+ pm8994_s2: s2 {
+ /* TODO */
+ };
+
+ pm8994_s3: s3 {
+ regulator-min-microvolt = <1300000>;
+ regulator-max-microvolt = <1300000>;
+ };
+
+ pm8994_s4: s4 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-allow-set-load;
+ regulator-system-load = <325000>;
+ };
+
+ pm8994_s5: s5 {
+ regulator-min-microvolt = <2150000>;
+ regulator-max-microvolt = <2150000>;
+ };
+
+ pm8994_s7: s7 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ pm8994_l1: l1 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ pm8994_l2: l2 {
+ regulator-min-microvolt = <1250000>;
+ regulator-max-microvolt = <1250000>;
+ };
+
+ pm8994_l3: l3 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8994_l4: l4 {
+ regulator-min-microvolt = <1225000>;
+ regulator-max-microvolt = <1225000>;
+ };
+
+ pm8994_l5: l5 {
+ /* TODO */
+ };
+
+ pm8994_l6: l6 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8994_l7: l7 {
+ /* TODO */
+ };
+
+ pm8994_l8: l8 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8994_l9: l9 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8994_l10: l10 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8994_l11: l11 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8994_l12: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8994_l13: l13 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <2950000>;
+ };
+
+ pm8994_l14: l14 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1200000>;
+ };
+
+ pm8994_l15: l15 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8994_l16: l16 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+
+ pm8994_l17: l17 {
+ regulator-min-microvolt = <2700000>;
+ regulator-max-microvolt = <2700000>;
+ };
+
+ pm8994_l18: l18 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3000000>;
+ };
+
+ pm8994_l19: l19 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8994_l20: l20 {
+ regulator-min-microvolt = <2950000>;
+ regulator-max-microvolt = <2950000>;
+ regulator-always-on;
+ regulator-boot-on;
+ regulator-allow-set-load;
+ regulator-system-load = <570000>;
+ };
+
+ pm8994_l21: l21 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ regulator-always-on;
+ };
+
+ pm8994_l22: l22 {
+ regulator-min-microvolt = <3100000>;
+ regulator-max-microvolt = <3100000>;
+ };
+
+ pm8994_l23: l23 {
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ };
+
+ pm8994_l24: l24 {
+ regulator-min-microvolt = <3075000>;
+ regulator-max-microvolt = <3150000>;
+ };
+
+ pm8994_l25: l25 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ };
+
+ pm8994_l26: l26 {
+ /* TODO: value from downstream
+ regulator-min-microvolt = <987500>;
+ fails to apply */
+ };
+
+ pm8994_l27: l27 {
+ regulator-min-microvolt = <1050000>;
+ regulator-max-microvolt = <1050000>;
+ };
+
+ pm8994_l28: l28 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1000000>;
+ };
+
+ pm8994_l29: l29 {
+ /* TODO: Unsupported voltage range.
+ regulator-min-microvolt = <2800000>;
+ regulator-max-microvolt = <2800000>;
+ qcom,init-voltage = <2800000>;
+ */
+ };
+
+ pm8994_l30: l30 {
+ /* TODO: get this verified
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,init-voltage = <1800000>;
+ */
+ };
+
+ pm8994_l31: l31 {
+ regulator-min-microvolt = <1262500>;
+ regulator-max-microvolt = <1262500>;
+ };
+
+ pm8994_l32: l32 {
+ /* TODO: get this verified
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1800000>;
+ qcom,init-voltage = <1800000>;
+ */
+ };
+ };
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi b/arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi
deleted file mode 100644
index 31e3eb6ab515..000000000000
--- a/arch/arm64/boot/dts/qcom/msm8994-smd-rpm.dtsi
+++ /dev/null
@@ -1,268 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0-only
-/* Copyright (c) 2015, LGE Inc. All rights reserved.
- * Copyright (c) 2016, The Linux Foundation. All rights reserved.
- */
-
-&smd_rpm {
- rpm {
- rpm_requests {
- pm8994-regulators {
-
- vdd_l1-supply = <&pm8994_s1>;
- vdd_l2_26_28-supply = <&pm8994_s3>;
- vdd_l3_11-supply = <&pm8994_s3>;
- vdd_l4_27_31-supply = <&pm8994_s3>;
- vdd_l5_7-supply = <&pm8994_s3>;
- vdd_l6_12_32-supply = <&pm8994_s5>;
- vdd_l8_16_30-supply = <&vreg_vph_pwr>;
- vdd_l9_10_18_22-supply = <&vreg_vph_pwr>;
- vdd_l13_19_23_24-supply = <&vreg_vph_pwr>;
- vdd_l14_15-supply = <&pm8994_s5>;
- vdd_l17_29-supply = <&vreg_vph_pwr>;
- vdd_l20_21-supply = <&vreg_vph_pwr>;
- vdd_l25-supply = <&pm8994_s5>;
- vdd_lvs1_2 = <&pm8994_s4>;
-
- s1 {
- regulator-min-microvolt = <800000>;
- regulator-max-microvolt = <800000>;
- };
-
- s2 {
- /* TODO */
- };
-
- s3 {
- regulator-min-microvolt = <1300000>;
- regulator-max-microvolt = <1300000>;
- };
-
- s4 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-allow-set-load;
- regulator-system-load = <325000>;
- };
-
- s5 {
- regulator-min-microvolt = <2150000>;
- regulator-max-microvolt = <2150000>;
- };
-
- s7 {
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- };
-
- l1 {
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- };
-
- l2 {
- regulator-min-microvolt = <1250000>;
- regulator-max-microvolt = <1250000>;
- };
-
- l3 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- };
-
- l4 {
- regulator-min-microvolt = <1225000>;
- regulator-max-microvolt = <1225000>;
- };
-
- l5 {
- /* TODO */
- };
-
- l6 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- l7 {
- /* TODO */
- };
-
- l8 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- l9 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- };
-
- l10 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- qcom,init-voltage = <1800000>;
- };
-
- l11 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- qcom,init-voltage = <1200000>;
- };
-
- l12 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- qcom,init-voltage = <1800000>;
- proxy-supply = <&pm8994_l12>;
- qcom,proxy-consumer-enable;
- qcom,proxy-consumer-current = <10000>;
- status = "okay";
- };
-
- l13 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <2950000>;
- qcom,init-voltage = <2950000>;
- status = "okay";
- };
-
- l14 {
- regulator-min-microvolt = <1200000>;
- regulator-max-microvolt = <1200000>;
- qcom,init-voltage = <1200000>;
- proxy-supply = <&pm8994_l14>;
- qcom,proxy-consumer-enable;
- qcom,proxy-consumer-current = <10000>;
- status = "okay";
- };
-
- l15 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- qcom,init-voltage = <1800000>;
- status = "okay";
- };
-
- l16 {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <2700000>;
- qcom,init-voltage = <2700000>;
- status = "okay";
- };
-
- l17 {
- regulator-min-microvolt = <2700000>;
- regulator-max-microvolt = <2700000>;
- qcom,init-voltage = <2700000>;
- status = "okay";
- };
-
- l18 {
- regulator-min-microvolt = <3000000>;
- regulator-max-microvolt = <3000000>;
- regulator-always-on;
- qcom,init-voltage = <3000000>;
- qcom,init-ldo-mode = <1>;
- };
-
- l19 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- qcom,init-voltage = <1800000>;
- status = "okay";
- };
-
- l20 {
- regulator-min-microvolt = <2950000>;
- regulator-max-microvolt = <2950000>;
- regulator-always-on;
- regulator-boot-on;
- regulator-allow-set-load;
- regulator-system-load = <570000>;
- };
-
- l21 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- regulator-always-on;
- qcom,init-voltage = <1800000>;
- };
-
- l22 {
- regulator-min-microvolt = <3100000>;
- regulator-max-microvolt = <3100000>;
- qcom,init-voltage = <3100000>;
- };
-
- l23 {
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- qcom,init-voltage = <2800000>;
- };
-
- l24 {
- regulator-min-microvolt = <3075000>;
- regulator-max-microvolt = <3150000>;
- qcom,init-voltage = <3075000>;
- };
-
- l25 {
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- qcom,init-voltage = <1800000>;
- };
-
- l26 {
- /* TODO: value from downstream
- regulator-min-microvolt = <987500>;
- fails to apply */
- };
-
- l27 {
- regulator-min-microvolt = <1050000>;
- regulator-max-microvolt = <1050000>;
- qcom,init-voltage = <1050000>;
- };
-
- l28 {
- regulator-min-microvolt = <1000000>;
- regulator-max-microvolt = <1000000>;
- qcom,init-voltage = <1000000>;
- proxy-supply = <&pm8994_l28>;
- qcom,proxy-consumer-enable;
- qcom,proxy-consumer-current = <10000>;
- };
-
- l29 {
- /* TODO: Unsupported voltage range.
- regulator-min-microvolt = <2800000>;
- regulator-max-microvolt = <2800000>;
- qcom,init-voltage = <2800000>;
- */
- };
-
- l30 {
- /* TODO: get this verified
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- qcom,init-voltage = <1800000>;
- */
- };
-
- l31 {
- regulator-min-microvolt = <1262500>;
- regulator-max-microvolt = <1262500>;
- qcom,init-voltage = <1262500>;
- };
-
- l32 {
- /* TODO: get this verified
- regulator-min-microvolt = <1800000>;
- regulator-max-microvolt = <1800000>;
- qcom,init-voltage = <1800000>;
- */
- };
- };
- };
- };
-};
--
2.27.0
Add device tree support for the Sony Xperia Z5 smartphone.
It's based on Sony Kitakami platform (msm8994) and hence
a Kitakami-common DTSI has been created so as to reduce
clutter when remaining devices are added.
The board currently supports
* Serial
* SDHCI
* I2C
* Regulator configuration
* pstore log dump
* GPIO keys
Signed-off-by: Konrad Dybcio <[email protected]>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../msm8994-sony-xperia-kitakami-sumire.dts | 13 +
.../qcom/msm8994-sony-xperia-kitakami.dtsi | 235 ++++++++++++++++++
3 files changed, 249 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts
create mode 100644 arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 0f2c33d611df..01ca9ac9f905 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -10,6 +10,7 @@ dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a3u-eur.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8916-samsung-a5u-eur.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8992-bullhead-rev-101.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8994-angler-rev-101.dtb
+dtb-$(CONFIG_ARCH_QCOM) += msm8994-sony-xperia-kitakami-sumire.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8996-mtp.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-asus-novago-tp370ql.dtb
dtb-$(CONFIG_ARCH_QCOM) += msm8998-hp-envy-x2.dtb
diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts
new file mode 100644
index 000000000000..e4ae6600be9d
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami-sumire.dts
@@ -0,0 +1,13 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+/dts-v1/;
+
+#include "msm8994-sony-xperia-kitakami.dtsi"
+
+/ {
+ model = "Sony Xperia Z5";
+ compatible = "somc,sumire-row", "qcom,msm8994";
+};
diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
new file mode 100644
index 000000000000..4032b7478f04
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
@@ -0,0 +1,235 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2020, Konrad Dybcio
+ */
+
+#include "msm8994.dtsi"
+#include "pm8994.dtsi"
+#include "pmi8994.dtsi"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/gpio-keys.h>
+
+/ {
+ /* required for bootloader to select correct board */
+ qcom,msm-id = <0xcf 0x20001>;
+ qcom,pmic-id = <0x10009 0x1000a 0x00 0x00>;
+ qcom,board-id = <8 0>;
+
+ /* Kitakami firmware doesn't support PSCI */
+ /delete-node/ psci;
+
+ gpio_keys {
+ compatible = "gpio-keys";
+ input-name = "gpio-keys";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ autorepeat;
+
+ button@0 {
+ label = "Volume Down";
+ gpios = <&pm8994_gpios 2 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_VOLUMEDOWN>;
+ wakeup-source;
+ debounce-interval = <15>;
+ };
+
+ button@1 {
+ label = "Volume Up";
+ gpios = <&pm8994_gpios 3 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_VOLUMEUP>;
+ wakeup-source;
+ debounce-interval = <15>;
+ };
+
+ button@2 {
+ label = "Camera Snapshot";
+ gpios = <&pm8994_gpios 4 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_CAMERA>;
+ wakeup-source;
+ debounce-interval = <15>;
+ };
+
+ button@3 {
+ label = "Camera Focus";
+ gpios = <&pm8994_gpios 5 GPIO_ACTIVE_LOW>;
+ linux,input-type = <1>;
+ linux,code = <KEY_VOLUMEUP>;
+ wakeup-source;
+ debounce-interval = <15>;
+ };
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* This is for getting crash logs using Android downstream kernels */
+ ramoops@1fe00000 {
+ compatible = "ramoops";
+ reg = <0x0 0x1fe00000 0x0 0x200000>;
+ console-size = <0x100000>;
+ record-size = <0x10000>;
+ ftrace-size = <0x10000>;
+ pmsg-size = <0x80000>;
+ };
+
+ continuous_splash: framebuffer@3401000{
+ reg = <0x0 0x3401000 0x0 0x2200000>;
+ no-map;
+ };
+
+ dfps_data_mem: dfps_data_mem@3400000 {
+ reg = <0x0 0x3400000 0x0 0x1000>;
+ no-map;
+ };
+
+ peripheral_region: peripheral_region@7400000 {
+ reg = <0x0 0x7400000 0x0 0x1c00000>;
+ no-map;
+ };
+
+ modem_region: modem_region@9000000 {
+ reg = <0x0 0x9000000 0x0 0x5a00000>;
+ no-map;
+ };
+
+ tzapp: modem_region@ea00000 {
+ reg = <0x0 0xea00000 0x0 0x1900000>;
+ no-map;
+ };
+
+ fb_region: fb_region@40000000 {
+ reg = <0x00 0x40000000 0x00 0x1000000>;
+ no-map;
+ };
+ };
+};
+
+&blsp_spi0 {
+ status = "okay";
+
+ /* FPC fingerprint reader */
+};
+
+/* I2C1 is disabled on this board */
+
+&blsp_i2c2 {
+ status = "okay";
+
+ /* NXP NFC */
+};
+
+&blsp_i2c4 {
+ status = "okay";
+
+ /* Empty but active */
+};
+
+&blsp_i2c5 {
+ status = "okay";
+
+ /* SMB1357 charger and sii8620 HDMI/MHL bridge */
+};
+
+&blsp_i2c6 {
+ status = "okay";
+
+ /* Synaptics touchscreen */
+};
+
+&blsp1_uart2 {
+ status = "okay";
+};
+
+&blsp2_uart2 {
+ status = "okay";
+};
+
+&rpm_requests {
+ pm8994_regulators: pm8994-regulators {
+ compatible = "qcom,rpm-pm8994-regulators";
+ vdd_l1-supply = <&pm8994_s1>;
+ vdd_l2_26_28-supply = <&pm8994_s3>;
+ vdd_l3_11-supply = <&pm8994_s3>;
+ vdd_l4_27_31-supply = <&pm8994_s3>;
+ vdd_l5_7-supply = <&pm8994_s3>;
+ vdd_l6_12_32-supply = <&pm8994_s5>;
+ vdd_l8_16_30-supply = <&vreg_vph_pwr>;
+ vdd_l9_10_18_22-supply = <&vreg_vph_pwr>;
+ vdd_l13_19_23_24-supply = <&vreg_vph_pwr>;
+ vdd_l14_15-supply = <&pm8994_s5>;
+ vdd_l17_29-supply = <&vreg_vph_pwr>;
+ vdd_l20_21-supply = <&vreg_vph_pwr>;
+ vdd_l25-supply = <&pm8994_s5>;
+ vdd_lvs1_2 = <&pm8994_s4>;
+
+ pm8994_s1: s1 {};
+ pm8994_s2: s2 {};
+ pm8994_s3: s3 {};
+ pm8994_s4: s4 {};
+ pm8994_s5: s5 {};
+ pm8994_s6: s6 {};
+ pm8994_s7: s7 {};
+
+ pm8994_l1: l1 {};
+ pm8994_l2: l2 {};
+ pm8994_l3: l3 {};
+ pm8994_l4: l4 {};
+ pm8994_l6: l6 {};
+ pm8994_l8: l8 {};
+ pm8994_l9: l9 {};
+ pm8994_l10: l10 {};
+ pm8994_l11: l11 {};
+ pm8994_l12: l12 {};
+ pm8994_l13: l13 {};
+ pm8994_l14: l14 {};
+ pm8994_l15: l15 {};
+ pm8994_l16: l16 {};
+ pm8994_l17: l17 {};
+ pm8994_l18: l18 {};
+ pm8994_l19: l19 {};
+ pm8994_l20: l20 {};
+ pm8994_l21: l21 {};
+ pm8994_l22: l22 {};
+ pm8994_l23: l23 {};
+ pm8994_l24: l24 {};
+ pm8994_l25: l25 {};
+ pm8994_l26: l26 {};
+ pm8994_l27: l27 {};
+ pm8994_l28: l28 {};
+ pm8994_l29: l29 {};
+ pm8994_l30: l30 {};
+ pm8994_l31: l31 {};
+ pm8994_l32: l32 {};
+
+ pm8994_lvs1: lvs1 {};
+ pm8994_lvs2: lvs2 {};
+ };
+
+ pmi8994_regulators: pmi8994-regulators {
+ compatible = "qcom,rpm-pmi8994-regulators";
+
+ pmi8994_s1: s1 {};
+ pmi8994_s2: s2 {};
+ pmi8994_s3: s3 {};
+ pmi8994_bby: boost-bypass {};
+ };
+};
+
+&sdhc1 {
+ status = "okay";
+
+ /* Downstream pushes 2.95V to the sdhci device,
+ * but upstream driver REALLY wants to make vmmc 1.8v
+ * cause of the hs400-1_8v mode. MMC works fine without
+ * that regulator, so let's not use it for now.
+ * vqmmc is also disabled cause driver stll complains.
+ *
+ * vmmc-supply = <&pm8994_l20>;
+ * vqmmc-supply = <&pm8994_s4>;
+ */
+};
--
2.27.0
This enables the node to be referenced directly from other
DTs.
Signed-off-by: Konrad Dybcio <[email protected]>
---
arch/arm64/boot/dts/qcom/msm8992.dtsi | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi
index 2021795c99ad..8e5a3ae79997 100644
--- a/arch/arm64/boot/dts/qcom/msm8992.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi
@@ -258,7 +258,7 @@ rpm {
qcom,local-pid = <0>;
qcom,remote-pid = <6>;
- rpm-requests {
+ rpm_requests: rpm-requests {
compatible = "qcom,rpm-msm8994";
qcom,smd-channels = "rpm_requests";
--
2.27.0
Add support for SMD RPM, including pm8994 and pmi8994
regulators.
Signed-off-by: Konrad Dybcio <[email protected]>
---
arch/arm64/boot/dts/qcom/msm8994.dtsi | 43 +++++++++++++++++++++++++++
1 file changed, 43 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi
index bf5aa7308b63..cd1476dfeca4 100644
--- a/arch/arm64/boot/dts/qcom/msm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi
@@ -175,9 +175,31 @@ smem_mem: smem_region@6a00000 {
};
};
+ smd {
+ compatible = "qcom,smd";
+ rpm {
+ interrupts = <GIC_SPI 168 IRQ_TYPE_EDGE_RISING>;
+ qcom,ipc = <&apcs 8 0>;
+ qcom,smd-edge = <15>;
+ qcom,local-pid = <0>;
+ qcom,remote-pid = <6>;
+
+ rpm_requests: rpm-requests {
+ compatible = "qcom,rpm-msm8994";
+ qcom,smd-channels = "rpm_requests";
+
+ rpmcc: rpmcc {
+ compatible = "qcom,rpmcc-msm8994";
+ #clock-cells = <1>;
+ };
+ };
+ };
+ };
+
smem {
compatible = "qcom,smem";
memory-region = <&smem_mem>;
+ qcom,rpm-msg-ram = <&rpm_msg_ram>;
hwlocks = <&tcsr_mutex 3>;
};
@@ -196,6 +218,12 @@ intc: interrupt-controller@f9000000 {
<0xf9002000 0x1000>;
};
+ apcs: mailbox@f900d000 {
+ compatible = "qcom,msm8994-apcs-kpss-global", "syscon";
+ reg = <0xf900d000 0x2000>;
+ #mbox-cells = <1>;
+ };
+
timer@f9020000 {
#address-cells = <1>;
#size-cells = <1>;
@@ -451,6 +479,11 @@ gcc: clock-controller@fc400000 {
reg = <0xfc400000 0x2000>;
};
+ rpm_msg_ram: memory@fc428000 {
+ compatible = "qcom,rpm-msg-ram";
+ reg = <0xfc428000 0x4000>;
+ };
+
restart@fc4ab000 {
compatible = "qcom,pshold";
reg = <0xfc4ab000 0x4>;
@@ -668,5 +701,15 @@ timer {
<1 4 0xff08>,
<1 1 0xff08>;
};
+
+ vreg_vph_pwr: vreg-vph-pwr {
+ compatible = "regulator-fixed";
+ regulator-name = "vph-pwr";
+
+ regulator-min-microvolt = <3600000>;
+ regulator-max-microvolt = <3600000>;
+
+ regulator-always-on;
+ };
};
--
2.27.0
MSM8994 has an APCS block similar to 8916, but
with a different clock driver due to the former
one having 2 clusters.
Signed-off-by: Konrad Dybcio <[email protected]>
---
.../devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml | 1 +
drivers/mailbox/qcom-apcs-ipc-mailbox.c | 5 +++++
2 files changed, 6 insertions(+)
diff --git a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml
index 12eff942708d..5125ca3533d2 100644
--- a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml
+++ b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml
@@ -18,6 +18,7 @@ properties:
enum:
- qcom,ipq8074-apcs-apps-global
- qcom,msm8916-apcs-kpss-global
+ - qcom,msm8994-apcs-kpss-global
- qcom,msm8996-apcs-hmss-global
- qcom,msm8998-apcs-hmss-global
- qcom,qcs404-apcs-apps-global
diff --git a/drivers/mailbox/qcom-apcs-ipc-mailbox.c b/drivers/mailbox/qcom-apcs-ipc-mailbox.c
index cec34f0af6ce..6d892136e0e6 100644
--- a/drivers/mailbox/qcom-apcs-ipc-mailbox.c
+++ b/drivers/mailbox/qcom-apcs-ipc-mailbox.c
@@ -41,6 +41,10 @@ static const struct qcom_apcs_ipc_data msm8916_apcs_data = {
.offset = 8, .clk_name = "qcom-apcs-msm8916-clk"
};
+static const struct qcom_apcs_ipc_data msm8994_apcs_data = {
+ .offset = 8, .clk_name = NULL
+};
+
static const struct qcom_apcs_ipc_data msm8996_apcs_data = {
.offset = 16, .clk_name = NULL
};
@@ -146,6 +150,7 @@ static const struct of_device_id qcom_apcs_ipc_of_match[] = {
{ .compatible = "qcom,ipq6018-apcs-apps-global", .data = &ipq6018_apcs_data },
{ .compatible = "qcom,ipq8074-apcs-apps-global", .data = &ipq8074_apcs_data },
{ .compatible = "qcom,msm8916-apcs-kpss-global", .data = &msm8916_apcs_data },
+ { .compatible = "qcom,msm8994-apcs-kpss-global", .data = &msm8994_apcs_data },
{ .compatible = "qcom,msm8996-apcs-hmss-global", .data = &msm8996_apcs_data },
{ .compatible = "qcom,msm8998-apcs-hmss-global", .data = &msm8998_apcs_data },
{ .compatible = "qcom,qcs404-apcs-apps-global", .data = &msm8916_apcs_data },
--
2.27.0
On Wed, 24 Jun 2020 17:00:59 +0200, Konrad Dybcio wrote:
> This change adds a compatible for msm8994,
> which requires no additional clocks for
> scm to probe correctly.
>
> Signed-off-by: Konrad Dybcio <[email protected]>
> ---
> Documentation/devicetree/bindings/firmware/qcom,scm.txt | 1 +
> drivers/firmware/qcom_scm.c | 1 +
> 2 files changed, 2 insertions(+)
>
Acked-by: Rob Herring <[email protected]>
On Wed, 24 Jun 2020 17:01:03 +0200, Konrad Dybcio wrote:
> MSM8994 has an APCS block similar to 8916, but
> with a different clock driver due to the former
> one having 2 clusters.
>
> Signed-off-by: Konrad Dybcio <[email protected]>
> ---
> .../devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml | 1 +
> drivers/mailbox/qcom-apcs-ipc-mailbox.c | 5 +++++
> 2 files changed, 6 insertions(+)
>
Acked-by: Rob Herring <[email protected]>
On Wed 24 Jun 08:01 PDT 2020, Konrad Dybcio wrote:
> MSM8994 has an APCS block similar to 8916, but
> with a different clock driver due to the former
> one having 2 clusters.
>
> Signed-off-by: Konrad Dybcio <[email protected]>
Reviewed-by: Bjorn Andersson <[email protected]>
Regards,
Bjorn
> ---
> .../devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml | 1 +
> drivers/mailbox/qcom-apcs-ipc-mailbox.c | 5 +++++
> 2 files changed, 6 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml
> index 12eff942708d..5125ca3533d2 100644
> --- a/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml
> +++ b/Documentation/devicetree/bindings/mailbox/qcom,apcs-kpss-global.yaml
> @@ -18,6 +18,7 @@ properties:
> enum:
> - qcom,ipq8074-apcs-apps-global
> - qcom,msm8916-apcs-kpss-global
> + - qcom,msm8994-apcs-kpss-global
> - qcom,msm8996-apcs-hmss-global
> - qcom,msm8998-apcs-hmss-global
> - qcom,qcs404-apcs-apps-global
> diff --git a/drivers/mailbox/qcom-apcs-ipc-mailbox.c b/drivers/mailbox/qcom-apcs-ipc-mailbox.c
> index cec34f0af6ce..6d892136e0e6 100644
> --- a/drivers/mailbox/qcom-apcs-ipc-mailbox.c
> +++ b/drivers/mailbox/qcom-apcs-ipc-mailbox.c
> @@ -41,6 +41,10 @@ static const struct qcom_apcs_ipc_data msm8916_apcs_data = {
> .offset = 8, .clk_name = "qcom-apcs-msm8916-clk"
> };
>
> +static const struct qcom_apcs_ipc_data msm8994_apcs_data = {
> + .offset = 8, .clk_name = NULL
> +};
> +
> static const struct qcom_apcs_ipc_data msm8996_apcs_data = {
> .offset = 16, .clk_name = NULL
> };
> @@ -146,6 +150,7 @@ static const struct of_device_id qcom_apcs_ipc_of_match[] = {
> { .compatible = "qcom,ipq6018-apcs-apps-global", .data = &ipq6018_apcs_data },
> { .compatible = "qcom,ipq8074-apcs-apps-global", .data = &ipq8074_apcs_data },
> { .compatible = "qcom,msm8916-apcs-kpss-global", .data = &msm8916_apcs_data },
> + { .compatible = "qcom,msm8994-apcs-kpss-global", .data = &msm8994_apcs_data },
> { .compatible = "qcom,msm8996-apcs-hmss-global", .data = &msm8996_apcs_data },
> { .compatible = "qcom,msm8998-apcs-hmss-global", .data = &msm8998_apcs_data },
> { .compatible = "qcom,qcs404-apcs-apps-global", .data = &msm8916_apcs_data },
> --
> 2.27.0
>