UDC hardware may have endpoints with different maxpacket
size. Current endpoint matching code takes first matching
endpoint from the list.
It's always possible that gadget allocates endpoints for
small transfers (maxpacket size) first, then larger ones.
That works fine if all matching UDC endpoints have same
maxpacket size or are big enough to serve that allocation.
However, some UDCs have first endpoints in the list with
bigger maxpacket size, whereas last endpoints are much
smaller. In this case endpoint allocation will fail for
the gadget (which allocates smaller endpoints first) on
final endpoint allocations.
To make endpoint allocation fair, pick up smallest
matching endpoints first, leaving bigger ones for
heavier applications.
Signed-off-by: Ruslan Bilovol <[email protected]>
---
drivers/usb/gadget/epautoconf.c | 23 ++++++++++++++++++-----
1 file changed, 18 insertions(+), 5 deletions(-)
diff --git a/drivers/usb/gadget/epautoconf.c b/drivers/usb/gadget/epautoconf.c
index 71b15c65b90f..1814a760ce48 100644
--- a/drivers/usb/gadget/epautoconf.c
+++ b/drivers/usb/gadget/epautoconf.c
@@ -66,7 +66,7 @@ struct usb_ep *usb_ep_autoconfig_ss(
struct usb_ss_ep_comp_descriptor *ep_comp
)
{
- struct usb_ep *ep;
+ struct usb_ep *ep, *ep_min = NULL;
u8 type;
type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK;
@@ -77,14 +77,27 @@ struct usb_ep *usb_ep_autoconfig_ss(
goto found_ep;
}
- /* Second, look at endpoints until an unclaimed one looks usable */
+ /*
+ * Second, look at endpoints until an unclaimed one looks usable.
+ * Try to find one with smallest maxpacket limit, leaving larger
+ * endpoints for heavier applications
+ */
list_for_each_entry (ep, &gadget->ep_list, ep_list) {
- if (usb_gadget_ep_match_desc(gadget, ep, desc, ep_comp))
- goto found_ep;
+ if (usb_gadget_ep_match_desc(gadget, ep, desc, ep_comp)) {
+ if (desc->wMaxPacketSize == 0)
+ goto found_ep;
+ else if (!ep_min)
+ ep_min = ep;
+ else if (ep->maxpacket_limit < ep_min->maxpacket_limit)
+ ep_min = ep;
+ }
}
/* Fail */
- return NULL;
+ if (!ep_min)
+ return NULL;
+
+ ep = ep_min;
found_ep:
/*
--
2.17.1
Ruslan Bilovol <[email protected]> writes:
> UDC hardware may have endpoints with different maxpacket
> size. Current endpoint matching code takes first matching
> endpoint from the list.
>
> It's always possible that gadget allocates endpoints for
> small transfers (maxpacket size) first, then larger ones.
> That works fine if all matching UDC endpoints have same
> maxpacket size or are big enough to serve that allocation.
>
> However, some UDCs have first endpoints in the list with
> bigger maxpacket size, whereas last endpoints are much
> smaller. In this case endpoint allocation will fail for
> the gadget (which allocates smaller endpoints first) on
> final endpoint allocations.
>
> To make endpoint allocation fair, pick up smallest
> matching endpoints first, leaving bigger ones for
> heavier applications.
>
> Signed-off-by: Ruslan Bilovol <[email protected]>
checking file drivers/usb/gadget/epautoconf.c
Hunk #1 succeeded at 151 with fuzz 1 (offset 85 lines).
Hunk #2 FAILED at 77.
1 out of 2 hunks FAILED
--
balbi