2020-06-30 12:28:50

by Fabio Estevam

Subject: [PATCH] dt-bindings: thermal: Remove soc unit address

Remove the soc unit address to fix the following warning seen with
'make dt_binding_check':

Documentation/devicetree/bindings/thermal/thermal-sensor.example.dts:22.20-49.11: Warning (unit_address_vs_reg): /example-0/soc@0: node has a unit name, but no reg or ranges property

Signed-off-by: Fabio Estevam <[email protected]>
---
Documentation/devicetree/bindings/thermal/thermal-sensor.yaml | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml b/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml
index fcd25a0af38c..727d04550324 100644
--- a/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml
+++ b/Documentation/devicetree/bindings/thermal/thermal-sensor.yaml
@@ -41,7 +41,7 @@ examples:
#include <dt-bindings/interrupt-controller/arm-gic.h>

// Example 1: SDM845 TSENS
- soc: soc@0 {
+ soc: soc {
#address-cells = <2>;
#size-cells = <2>;

--
2.17.1

2020-06-30 14:42:25

by Rob Herring (Arm)

Subject: Re: [PATCH] dt-bindings: thermal: Remove soc unit address

On Tue, 30 Jun 2020 09:18:04 -0300, Fabio Estevam wrote:
> Remove the soc unit address to fix the following warning seen with
> 'make dt_binding_check':
>
> Documentation/devicetree/bindings/thermal/thermal-sensor.example.dts:22.20-49.11: Warning (unit_address_vs_reg): /example-0/soc@0: node has a unit name, but no reg or ranges property
>
> Signed-off-by: Fabio Estevam <[email protected]>
> ---
> Documentation/devicetree/bindings/thermal/thermal-sensor.yaml | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>

Applied, thanks!

2020-06-30 15:04:06

by Rob Herring

Subject: Re: [PATCH] dt-bindings: thermal: Remove soc unit address

On Tue, Jun 30, 2020 at 8:41 AM Rob Herring <[email protected]> wrote:
>
> On Tue, 30 Jun 2020 09:18:04 -0300, Fabio Estevam wrote:
> > Remove the soc unit address to fix the following warning seen with
> > 'make dt_binding_check':
> >
> > Documentation/devicetree/bindings/thermal/thermal-sensor.example.dts:22.20-49.11: Warning (unit_address_vs_reg): /example-0/soc@0: node has a unit name, but no reg or ranges property
> >
> > Signed-off-by: Fabio Estevam <[email protected]>
> > ---
> > Documentation/devicetree/bindings/thermal/thermal-sensor.yaml | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
>
> Applied, thanks!

thermal-zones.yaml had the same warning, so I added a fix for it to this.

Rob