This change regresses the QCA6174A-3 bluetooth chip, preventing
firmware from being properly loaded. Without this change, the
chip works as intended.
The device is the Kukui Chromebook using the Mediatek chipset
and the 8250_mtk uart. Initial controller baudrate is 115200
and operating speed is 3000000. Our entire suite of bluetooth
tests now fail on this platform due to an apparent failure to
sync its firmware on initialization.
The driver is in the cros tree at drivers/bluetooth/hci_qca.c
and uses the serdev interface. Specifically, this is the
QCA_ROME chipset.
Daniel Winkler (1):
Revert "serial: 8250: Fix max baud limit in generic 8250 port"
drivers/tty/serial/8250/8250_port.c | 4 +---
1 file changed, 1 insertion(+), 3 deletions(-)
--
2.27.0.212.ge8ba1cc988-goog
On Thu, Jul 02, 2020 at 01:37:13AM +0300, Serge Semin wrote:
> 1) Add a new capability like UART_CAP_NO16DIV and take it into account
> in the serial8250_get_baud_rate() method.
>
> I don't have a documentation for the Mediatek UART port, but it seems to me
> that that controller calculates the baud rate differently from the standard
> 8250 port. A standard 8250 port does that by the next formulae:
> baud = uartclk / (16 * divisor).
> While it seems to me that the Mediatek port uses the formulae like:
> baud = uartclk / divisor. (Please, correct me if I'm wrong)
8250_bcm2835aux.c seems to suffer from a similar issue and
solves it like this in the ->probe hook:
/* the HW-clock divider for bcm2835aux is 8,
* but 8250 expects a divider of 16,
* so we have to multiply the actual clock by 2
* to get identical baudrates.
*/
up.port.uartclk = clk_get_rate(data->clk) * 2;
> 2) Manually call serial8250_do_set_divisor() in the custom set_termios()
> callback.
>
> Just add the uart_update_timeout() and serial8250_do_set_divisor() methods
> invocation into the mtk8250_set_termios() function, which the original commit
> 81bb549fdf14 ("serial: 8250_mtk: support big baud rate") author should have
> done in the first place.
That sound preferable as adding new quirks into core code feels
like a case of midlayer fallacy:
https://blog.ffwll.ch/2016/12/midlayers-once-more-with-feeling.html
Thanks,
Lukas
On Thu, Jul 02, 2020 at 01:37:13AM +0300, Serge Semin wrote:
> On Wed, Jul 01, 2020 at 02:13:36PM -0700, Daniel Winkler wrote:
> >
> > This change regresses the QCA6174A-3 bluetooth chip, preventing
> > firmware from being properly loaded. Without this change, the
> > chip works as intended.
> >
> > The device is the Kukui Chromebook using the Mediatek chipset
> > and the 8250_mtk uart. Initial controller baudrate is 115200
> > and operating speed is 3000000. Our entire suite of bluetooth
> > tests now fail on this platform due to an apparent failure to
> > sync its firmware on initialization.
>
> Ok. It's mediatek 8250 driver, which is responsible for the failure.
> Then we'll have two options:
>
> 1) Add a new capability like UART_CAP_NO16DIV and take it into account
> in the serial8250_get_baud_rate() method.
>
> I don't have a documentation for the Mediatek UART port, but it seems to me
> that that controller calculates the baud rate differently from the standard
> 8250 port. A standard 8250 port does that by the next formulae:
> baud = uartclk / (16 * divisor).
> While it seems to me that the Mediatek port uses the formulae like:
> baud = uartclk / divisor. (Please, correct me if I'm wrong)
> If so, then we could introduce a new capability like UART_CAP_NO16DIV. The
> 8250_mtk driver will add it to the 8250-port capabilities field. The
> serial8250_get_baud_rate() method should be altered in a way so one would check
> whether the UART_CAP_NO16DIV flag is set and if it is then the
> uart_get_baud_rate() function will be called without uartclk normalized by the
> factor of 16.
>
> 2) Manually call serial8250_do_set_divisor() in the custom set_termios()
> callback.
>
> Just add the uart_update_timeout() and serial8250_do_set_divisor() methods
> invocation into the mtk8250_set_termios() function, which the original commit
> 81bb549fdf14 ("serial: 8250_mtk: support big baud rate") author should have
> done in the first place.
Sounds like a sane fix, thanks for looking into this.
greg k-h
On Thu, Jul 02, 2020 at 06:11:52AM +0200, Lukas Wunner wrote:
> On Thu, Jul 02, 2020 at 01:37:13AM +0300, Serge Semin wrote:
> > 1) Add a new capability like UART_CAP_NO16DIV and take it into account
> > in the serial8250_get_baud_rate() method.
> >
> > I don't have a documentation for the Mediatek UART port, but it seems to me
> > that that controller calculates the baud rate differently from the standard
> > 8250 port. A standard 8250 port does that by the next formulae:
> > baud = uartclk / (16 * divisor).
> > While it seems to me that the Mediatek port uses the formulae like:
> > baud = uartclk / divisor. (Please, correct me if I'm wrong)
>
> 8250_bcm2835aux.c seems to suffer from a similar issue and
> solves it like this in the ->probe hook:
>
> /* the HW-clock divider for bcm2835aux is 8,
> * but 8250 expects a divider of 16,
> * so we have to multiply the actual clock by 2
> * to get identical baudrates.
> */
> up.port.uartclk = clk_get_rate(data->clk) * 2;
8250_mid for example lies about UART clock due to this. It has a comment in the
code in its ->set_termios().
Yes, we have a lot of possibilities here to fix, I guess. We have custom
termios callback, also get and set divisor and so on.
--
With Best Regards,
Andy Shevchenko