Add support and enable decoding of H264 High 10 and 4:2:2 profiles.
Decoded CAPTURE buffer width is aligned to 64 pixels to accommodate HW
requirement on 10-bit format buffers.
The new valid_fmt operation is implemented and return a valid pixelformat
for the provided SPS control.
Signed-off-by: Jonas Karlman <[email protected]>
---
Changes in v2:
- Only align decoded buffer instead of using frmsize step_width
---
drivers/staging/media/rkvdec/rkvdec-h264.c | 20 ++++++++++++++++++++
drivers/staging/media/rkvdec/rkvdec.c | 19 +++++++++----------
2 files changed, 29 insertions(+), 10 deletions(-)
diff --git a/drivers/staging/media/rkvdec/rkvdec-h264.c b/drivers/staging/media/rkvdec/rkvdec-h264.c
index 10756b9d6118..0757fc97d1ff 100644
--- a/drivers/staging/media/rkvdec/rkvdec-h264.c
+++ b/drivers/staging/media/rkvdec/rkvdec-h264.c
@@ -1018,6 +1018,25 @@ static int rkvdec_h264_adjust_fmt(struct rkvdec_ctx *ctx,
return 0;
}
+static u32 rkvdec_h264_valid_fmt(struct rkvdec_ctx *ctx, struct v4l2_ctrl *ctrl)
+{
+ const struct v4l2_ctrl_h264_sps *sps = ctrl->p_new.p;
+
+ if (sps->bit_depth_luma_minus8 == 0) {
+ if (sps->chroma_format_idc == 2)
+ return V4L2_PIX_FMT_NV16;
+ else
+ return V4L2_PIX_FMT_NV12;
+ } else if (sps->bit_depth_luma_minus8 == 2) {
+ if (sps->chroma_format_idc == 2)
+ return V4L2_PIX_FMT_NV20;
+ else
+ return V4L2_PIX_FMT_NV15;
+ }
+
+ return 0;
+}
+
static int rkvdec_h264_start(struct rkvdec_ctx *ctx)
{
struct rkvdec_dev *rkvdec = ctx->dev;
@@ -1125,6 +1144,7 @@ static int rkvdec_h264_run(struct rkvdec_ctx *ctx)
const struct rkvdec_coded_fmt_ops rkvdec_h264_fmt_ops = {
.adjust_fmt = rkvdec_h264_adjust_fmt,
+ .valid_fmt = rkvdec_h264_valid_fmt,
.start = rkvdec_h264_start,
.stop = rkvdec_h264_stop,
.run = rkvdec_h264_run,
diff --git a/drivers/staging/media/rkvdec/rkvdec.c b/drivers/staging/media/rkvdec/rkvdec.c
index 11a88cb6407d..4faee9262392 100644
--- a/drivers/staging/media/rkvdec/rkvdec.c
+++ b/drivers/staging/media/rkvdec/rkvdec.c
@@ -31,7 +31,7 @@ static void rkvdec_fill_decoded_pixfmt(struct rkvdec_ctx *ctx,
struct v4l2_pix_format_mplane *pix_mp)
{
v4l2_fill_pixfmt_mp(pix_mp, pix_mp->pixelformat,
- pix_mp->width, pix_mp->height);
+ ALIGN(pix_mp->width, 64), pix_mp->height);
pix_mp->plane_fmt[0].sizeimage += 128 *
DIV_ROUND_UP(pix_mp->width, 16) *
DIV_ROUND_UP(pix_mp->height, 16);
@@ -55,19 +55,15 @@ static int rkvdec_try_ctrl(struct v4l2_ctrl *ctrl)
if (ctrl->id == V4L2_CID_MPEG_VIDEO_H264_SPS) {
const struct v4l2_ctrl_h264_sps *sps = ctrl->p_new.p;
unsigned int width, height;
- /*
- * TODO: The hardware supports 10-bit and 4:2:2 profiles,
- * but it's currently broken in the driver.
- * Reject them for now, until it's fixed.
- */
- if (sps->chroma_format_idc > 1)
- /* Only 4:0:0 and 4:2:0 are supported */
+
+ if (sps->chroma_format_idc > 2)
+ /* Only 4:0:0, 4:2:0 and 4:2:2 are supported */
return -EINVAL;
if (sps->bit_depth_luma_minus8 != sps->bit_depth_chroma_minus8)
/* Luma and chroma bit depth mismatch */
return -EINVAL;
- if (sps->bit_depth_luma_minus8 != 0)
- /* Only 8-bit is supported */
+ if (sps->bit_depth_luma_minus8 != 0 && sps->bit_depth_luma_minus8 != 2)
+ /* Only 8-bit and 10-bit is supported */
return -EINVAL;
if (ctx->valid_fmt && ctx->valid_fmt != rkvdec_valid_fmt(ctx, ctrl))
@@ -157,6 +153,9 @@ static const struct rkvdec_ctrls rkvdec_h264_ctrls = {
static const u32 rkvdec_h264_decoded_fmts[] = {
V4L2_PIX_FMT_NV12,
+ V4L2_PIX_FMT_NV15,
+ V4L2_PIX_FMT_NV16,
+ V4L2_PIX_FMT_NV20,
};
static const struct rkvdec_coded_fmt_desc rkvdec_coded_fmts[] = {
--
2.17.1