This is the start of the stable review cycle for the 4.9.230 release.
There are 24 patches in this series, all will be posted as a response
to this one. If anyone has any issues with these being applied, please
let me know.
Responses should be made by Thu, 09 Jul 2020 14:57:34 +0000.
Anything received after that time might be too late.
The whole patch series can be found in one patch at:
https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.230-rc1.gz
or in the git tree and branch at:
git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
and the diffstat can be found below.
thanks,
greg k-h
-------------
Pseudo-Shortlog of commits:
Greg Kroah-Hartman <[email protected]>
Linux 4.9.230-rc1
Peter Jones <[email protected]>
efi: Make it possible to disable efivar_ssdt entirely
Vasily Averin <[email protected]>
netfilter: nf_conntrack_h323: lost .data_len definition for Q.931/ipv6
Hauke Mehrtens <[email protected]>
MIPS: Add missing EHB in mtc0 -> mfc0 sequence for DSPen
Zhang Xiaoxu <[email protected]>
cifs: Fix the target file was deleted when rename failed.
Paul Aurich <[email protected]>
SMB3: Honor persistent/resilient handle flags for multiuser mounts
Paul Aurich <[email protected]>
SMB3: Honor 'seal' flag for multiuser mounts
Greg Kroah-Hartman <[email protected]>
Revert "ALSA: usb-audio: Improve frames size computation"
Chris Packham <[email protected]>
i2c: algo-pca: Add 0x78 as SCL stuck low status for PCA9665
Hou Tao <[email protected]>
virtio-blk: free vblk-vqs in error path of virtblk_probe()
Misono Tomohiro <[email protected]>
hwmon: (acpi_power_meter) Fix potential memory leak in acpi_power_meter_add()
Chu Lin <[email protected]>
hwmon: (max6697) Make sure the OVERT mask is set correctly
Rahul Lakkireddy <[email protected]>
cxgb4: parse TC-U32 key values and masks natively
Shile Zhang <[email protected]>
sched/rt: Show the 'sched_rr_timeslice' SCHED_RR timeslice tuning knob in milliseconds
Herbert Xu <[email protected]>
crypto: af_alg - fix use-after-free in af_alg_accept() due to bh_lock_sock()
Douglas Anderson <[email protected]>
kgdb: Avoid suspicious RCU usage warning
Zqiang <[email protected]>
usb: usbtest: fix missing kfree(dev->buf) in usbtest_disconnect
Qian Cai <[email protected]>
mm/slub: fix stack overruns with SLUB_STATS
Dongli Zhang <[email protected]>
mm/slub.c: fix corrupted freechain in deactivate_slab()
Tuomas Tynkkynen <[email protected]>
usbnet: smsc95xx: Fix use-after-free after removal
Borislav Petkov <[email protected]>
EDAC/amd64: Read back the scrub rate PCI register on F15h
Hugh Dickins <[email protected]>
mm: fix swap cache node allocation mask
Filipe Manana <[email protected]>
btrfs: fix data block group relocation failure due to concurrent scrub
Anand Jain <[email protected]>
btrfs: cow_file_range() num_bytes and disk_num_bytes are same
Filipe Manana <[email protected]>
btrfs: fix a block group ref counter leak after failure to remove block group
-------------
Diffstat:
Makefile | 4 +-
arch/mips/kernel/traps.c | 1 +
crypto/af_alg.c | 26 ++---
crypto/algif_aead.c | 9 +-
crypto/algif_hash.c | 9 +-
crypto/algif_skcipher.c | 9 +-
drivers/block/virtio_blk.c | 1 +
drivers/edac/amd64_edac.c | 2 +
drivers/firmware/efi/Kconfig | 11 ++
drivers/firmware/efi/efi.c | 2 +-
drivers/hwmon/acpi_power_meter.c | 4 +-
drivers/hwmon/max6697.c | 7 +-
drivers/i2c/algos/i2c-algo-pca.c | 3 +-
drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_u32.c | 18 +--
.../ethernet/chelsio/cxgb4/cxgb4_tc_u32_parse.h | 122 ++++++++++++++-------
drivers/net/usb/smsc95xx.c | 2 +-
drivers/usb/misc/usbtest.c | 1 +
fs/btrfs/extent-tree.c | 19 ++--
fs/btrfs/inode.c | 36 ++++--
fs/cifs/connect.c | 3 +
fs/cifs/inode.c | 10 +-
include/crypto/if_alg.h | 4 +-
include/linux/sched/sysctl.h | 1 +
kernel/debug/debug_core.c | 4 +
kernel/sched/core.c | 5 +-
kernel/sched/rt.c | 1 +
kernel/sysctl.c | 2 +-
mm/slub.c | 30 ++++-
mm/swap_state.c | 3 +-
net/netfilter/nf_conntrack_h323_main.c | 1 +
sound/usb/card.h | 4 -
sound/usb/endpoint.c | 43 +-------
sound/usb/endpoint.h | 1 -
sound/usb/pcm.c | 2 -
34 files changed, 235 insertions(+), 165 deletions(-)
From: Anand Jain <[email protected]>
[ Upstream commit 3752d22fcea160cc2493e34f5e0e41cdd7fdd921 ]
This patch deletes local variable disk_num_bytes as its value
is same as num_bytes in the function cow_file_range().
Signed-off-by: Anand Jain <[email protected]>
Reviewed-by: Nikolay Borisov <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/btrfs/inode.c | 17 ++++++++---------
1 file changed, 8 insertions(+), 9 deletions(-)
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index c425443c31fea..6d63050abe214 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -947,7 +947,6 @@ static noinline int cow_file_range(struct inode *inode,
u64 alloc_hint = 0;
u64 num_bytes;
unsigned long ram_size;
- u64 disk_num_bytes;
u64 cur_alloc_size;
u64 blocksize = root->sectorsize;
struct btrfs_key ins;
@@ -963,7 +962,6 @@ static noinline int cow_file_range(struct inode *inode,
num_bytes = ALIGN(end - start + 1, blocksize);
num_bytes = max(blocksize, num_bytes);
- disk_num_bytes = num_bytes;
/* if this is a small write inside eof, kick off defrag */
if (num_bytes < SZ_64K &&
@@ -992,16 +990,15 @@ static noinline int cow_file_range(struct inode *inode,
}
}
- BUG_ON(disk_num_bytes >
- btrfs_super_total_bytes(root->fs_info->super_copy));
+ BUG_ON(num_bytes > btrfs_super_total_bytes(root->fs_info->super_copy));
alloc_hint = get_extent_allocation_hint(inode, start, num_bytes);
btrfs_drop_extent_cache(inode, start, start + num_bytes - 1, 0);
- while (disk_num_bytes > 0) {
+ while (num_bytes > 0) {
unsigned long op;
- cur_alloc_size = disk_num_bytes;
+ cur_alloc_size = num_bytes;
ret = btrfs_reserve_extent(root, cur_alloc_size, cur_alloc_size,
root->sectorsize, 0, alloc_hint,
&ins, 1, 1);
@@ -1058,7 +1055,7 @@ static noinline int cow_file_range(struct inode *inode,
btrfs_dec_block_group_reservations(root->fs_info, ins.objectid);
- if (disk_num_bytes < cur_alloc_size)
+ if (num_bytes < cur_alloc_size)
break;
/* we're not doing compressed IO, don't unlock the first
@@ -1076,8 +1073,10 @@ static noinline int cow_file_range(struct inode *inode,
delalloc_end, locked_page,
EXTENT_LOCKED | EXTENT_DELALLOC,
op);
- disk_num_bytes -= cur_alloc_size;
- num_bytes -= cur_alloc_size;
+ if (num_bytes < cur_alloc_size)
+ num_bytes = 0;
+ else
+ num_bytes -= cur_alloc_size;
alloc_hint = ins.objectid + ins.offset;
start += cur_alloc_size;
}
--
2.25.1
From: Herbert Xu <[email protected]>
commit 34c86f4c4a7be3b3e35aa48bd18299d4c756064d upstream.
The locking in af_alg_release_parent is broken as the BH socket
lock can only be taken if there is a code-path to handle the case
where the lock is owned by process-context. Instead of adding
such handling, we can fix this by changing the ref counts to
atomic_t.
This patch also modifies the main refcnt to include both normal
and nokey sockets. This way we don't have to fudge the nokey
ref count when a socket changes from nokey to normal.
Credits go to Mauricio Faria de Oliveira who diagnosed this bug
and sent a patch for it:
https://lore.kernel.org/linux-crypto/[email protected]/
Reported-by: Brian Moyles <[email protected]>
Reported-by: Mauricio Faria de Oliveira <[email protected]>
Fixes: 37f96694cf73 ("crypto: af_alg - Use bh_lock_sock in...")
Cc: <[email protected]>
Signed-off-by: Herbert Xu <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
crypto/af_alg.c | 26 +++++++++++---------------
crypto/algif_aead.c | 9 +++------
crypto/algif_hash.c | 9 +++------
crypto/algif_skcipher.c | 9 +++------
include/crypto/if_alg.h | 4 ++--
5 files changed, 22 insertions(+), 35 deletions(-)
--- a/crypto/af_alg.c
+++ b/crypto/af_alg.c
@@ -130,21 +130,15 @@ EXPORT_SYMBOL_GPL(af_alg_release);
void af_alg_release_parent(struct sock *sk)
{
struct alg_sock *ask = alg_sk(sk);
- unsigned int nokey = ask->nokey_refcnt;
- bool last = nokey && !ask->refcnt;
+ unsigned int nokey = atomic_read(&ask->nokey_refcnt);
sk = ask->parent;
ask = alg_sk(sk);
- local_bh_disable();
- bh_lock_sock(sk);
- ask->nokey_refcnt -= nokey;
- if (!last)
- last = !--ask->refcnt;
- bh_unlock_sock(sk);
- local_bh_enable();
+ if (nokey)
+ atomic_dec(&ask->nokey_refcnt);
- if (last)
+ if (atomic_dec_and_test(&ask->refcnt))
sock_put(sk);
}
EXPORT_SYMBOL_GPL(af_alg_release_parent);
@@ -189,7 +183,7 @@ static int alg_bind(struct socket *sock,
err = -EBUSY;
lock_sock(sk);
- if (ask->refcnt | ask->nokey_refcnt)
+ if (atomic_read(&ask->refcnt))
goto unlock;
swap(ask->type, type);
@@ -238,7 +232,7 @@ static int alg_setsockopt(struct socket
int err = -EBUSY;
lock_sock(sk);
- if (ask->refcnt)
+ if (atomic_read(&ask->refcnt) != atomic_read(&ask->nokey_refcnt))
goto unlock;
type = ask->type;
@@ -305,12 +299,14 @@ int af_alg_accept(struct sock *sk, struc
sk2->sk_family = PF_ALG;
- if (nokey || !ask->refcnt++)
+ if (atomic_inc_return_relaxed(&ask->refcnt) == 1)
sock_hold(sk);
- ask->nokey_refcnt += nokey;
+ if (nokey) {
+ atomic_inc(&ask->nokey_refcnt);
+ atomic_set(&alg_sk(sk2)->nokey_refcnt, 1);
+ }
alg_sk(sk2)->parent = sk;
alg_sk(sk2)->type = type;
- alg_sk(sk2)->nokey_refcnt = nokey;
newsock->ops = type->ops;
newsock->state = SS_CONNECTED;
--- a/crypto/algif_aead.c
+++ b/crypto/algif_aead.c
@@ -747,7 +747,7 @@ static int aead_check_key(struct socket
struct alg_sock *ask = alg_sk(sk);
lock_sock(sk);
- if (ask->refcnt)
+ if (!atomic_read(&ask->nokey_refcnt))
goto unlock_child;
psk = ask->parent;
@@ -759,11 +759,8 @@ static int aead_check_key(struct socket
if (!tfm->has_key)
goto unlock;
- if (!pask->refcnt++)
- sock_hold(psk);
-
- ask->refcnt = 1;
- sock_put(psk);
+ atomic_dec(&pask->nokey_refcnt);
+ atomic_set(&ask->nokey_refcnt, 0);
err = 0;
--- a/crypto/algif_hash.c
+++ b/crypto/algif_hash.c
@@ -308,7 +308,7 @@ static int hash_check_key(struct socket
struct alg_sock *ask = alg_sk(sk);
lock_sock(sk);
- if (ask->refcnt)
+ if (!atomic_read(&ask->nokey_refcnt))
goto unlock_child;
psk = ask->parent;
@@ -320,11 +320,8 @@ static int hash_check_key(struct socket
if (crypto_ahash_get_flags(tfm) & CRYPTO_TFM_NEED_KEY)
goto unlock;
- if (!pask->refcnt++)
- sock_hold(psk);
-
- ask->refcnt = 1;
- sock_put(psk);
+ atomic_dec(&pask->nokey_refcnt);
+ atomic_set(&ask->nokey_refcnt, 0);
err = 0;
--- a/crypto/algif_skcipher.c
+++ b/crypto/algif_skcipher.c
@@ -774,7 +774,7 @@ static int skcipher_check_key(struct soc
struct alg_sock *ask = alg_sk(sk);
lock_sock(sk);
- if (ask->refcnt)
+ if (!atomic_read(&ask->nokey_refcnt))
goto unlock_child;
psk = ask->parent;
@@ -786,11 +786,8 @@ static int skcipher_check_key(struct soc
if (!tfm->has_key)
goto unlock;
- if (!pask->refcnt++)
- sock_hold(psk);
-
- ask->refcnt = 1;
- sock_put(psk);
+ atomic_dec(&pask->nokey_refcnt);
+ atomic_set(&ask->nokey_refcnt, 0);
err = 0;
--- a/include/crypto/if_alg.h
+++ b/include/crypto/if_alg.h
@@ -30,8 +30,8 @@ struct alg_sock {
struct sock *parent;
- unsigned int refcnt;
- unsigned int nokey_refcnt;
+ atomic_t refcnt;
+ atomic_t nokey_refcnt;
const struct af_alg_type *type;
void *private;
From: Shile Zhang <[email protected]>
[ Upstream commit 975e155ed8732cb81f55c021c441ae662dd040b5 ]
We added the 'sched_rr_timeslice_ms' SCHED_RR tuning knob in this commit:
ce0dbbbb30ae ("sched/rt: Add a tuning knob to allow changing SCHED_RR timeslice")
... which name suggests to users that it's in milliseconds, while in reality
it's being set in milliseconds but the result is shown in jiffies.
This is obviously confusing when HZ is not 1000, it makes it appear like the
value set failed, such as HZ=100:
root# echo 100 > /proc/sys/kernel/sched_rr_timeslice_ms
root# cat /proc/sys/kernel/sched_rr_timeslice_ms
10
Fix this to be milliseconds all around.
Signed-off-by: Shile Zhang <[email protected]>
Signed-off-by: Peter Zijlstra (Intel) <[email protected]>
Cc: Linus Torvalds <[email protected]>
Cc: Mike Galbraith <[email protected]>
Cc: Peter Zijlstra <[email protected]>
Cc: Thomas Gleixner <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Ingo Molnar <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
include/linux/sched/sysctl.h | 1 +
kernel/sched/core.c | 5 +++--
kernel/sched/rt.c | 1 +
kernel/sysctl.c | 2 +-
4 files changed, 6 insertions(+), 3 deletions(-)
diff --git a/include/linux/sched/sysctl.h b/include/linux/sched/sysctl.h
index 05e8b6e4edcb6..debcd4bf22956 100644
--- a/include/linux/sched/sysctl.h
+++ b/include/linux/sched/sysctl.h
@@ -60,6 +60,7 @@ extern unsigned int sysctl_sched_cfs_bandwidth_slice;
extern unsigned int sysctl_sched_autogroup_enabled;
#endif
+extern int sysctl_sched_rr_timeslice;
extern int sched_rr_timeslice;
extern int sched_rr_handler(struct ctl_table *table, int write,
diff --git a/kernel/sched/core.c b/kernel/sched/core.c
index 870d802c46f90..c7c7ba8807f83 100644
--- a/kernel/sched/core.c
+++ b/kernel/sched/core.c
@@ -8389,8 +8389,9 @@ int sched_rr_handler(struct ctl_table *table, int write,
/* make sure that internally we keep jiffies */
/* also, writing zero resets timeslice to default */
if (!ret && write) {
- sched_rr_timeslice = sched_rr_timeslice <= 0 ?
- RR_TIMESLICE : msecs_to_jiffies(sched_rr_timeslice);
+ sched_rr_timeslice =
+ sysctl_sched_rr_timeslice <= 0 ? RR_TIMESLICE :
+ msecs_to_jiffies(sysctl_sched_rr_timeslice);
}
mutex_unlock(&mutex);
return ret;
diff --git a/kernel/sched/rt.c b/kernel/sched/rt.c
index 9ab4d73e9cc95..5034c41a53130 100644
--- a/kernel/sched/rt.c
+++ b/kernel/sched/rt.c
@@ -9,6 +9,7 @@
#include <linux/irq_work.h>
int sched_rr_timeslice = RR_TIMESLICE;
+int sysctl_sched_rr_timeslice = (MSEC_PER_SEC / HZ) * RR_TIMESLICE;
static int do_sched_rt_period_timer(struct rt_bandwidth *rt_b, int overrun);
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index 34449ec0689d0..513e6da318c47 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -426,7 +426,7 @@ static struct ctl_table kern_table[] = {
},
{
.procname = "sched_rr_timeslice_ms",
- .data = &sched_rr_timeslice,
+ .data = &sysctl_sched_rr_timeslice,
.maxlen = sizeof(int),
.mode = 0644,
.proc_handler = sched_rr_handler,
--
2.25.1
From: Rahul Lakkireddy <[email protected]>
[ Upstream commit 27f78cb245abdb86735529c13b0a579f57829e71 ]
TC-U32 passes all keys values and masks in __be32 format. The parser
already expects this and hence pass the value and masks in __be32
natively to the parser.
Fixes following sparse warnings in several places:
cxgb4_tc_u32.c:57:21: warning: incorrect type in assignment (different base
types)
cxgb4_tc_u32.c:57:21: expected unsigned int [usertype] val
cxgb4_tc_u32.c:57:21: got restricted __be32 [usertype] val
cxgb4_tc_u32_parse.h:48:24: warning: cast to restricted __be32
Fixes: 2e8aad7bf203 ("cxgb4: add parser to translate u32 filters to internal spec")
Signed-off-by: Rahul Lakkireddy <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
.../net/ethernet/chelsio/cxgb4/cxgb4_tc_u32.c | 18 +--
.../chelsio/cxgb4/cxgb4_tc_u32_parse.h | 122 ++++++++++++------
2 files changed, 91 insertions(+), 49 deletions(-)
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_u32.c b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_u32.c
index 49d2debb334e8..6afad4d3385a9 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_u32.c
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_u32.c
@@ -47,7 +47,7 @@ static int fill_match_fields(struct adapter *adap,
bool next_header)
{
unsigned int i, j;
- u32 val, mask;
+ __be32 val, mask;
int off, err;
bool found;
@@ -217,7 +217,7 @@ int cxgb4_config_knode(struct net_device *dev, __be16 protocol,
const struct cxgb4_next_header *next;
bool found = false;
unsigned int i, j;
- u32 val, mask;
+ __be32 val, mask;
int off;
if (t->table[link_uhtid - 1].link_handle) {
@@ -231,10 +231,10 @@ int cxgb4_config_knode(struct net_device *dev, __be16 protocol,
/* Try to find matches that allow jumps to next header. */
for (i = 0; next[i].jump; i++) {
- if (next[i].offoff != cls->knode.sel->offoff ||
- next[i].shift != cls->knode.sel->offshift ||
- next[i].mask != cls->knode.sel->offmask ||
- next[i].offset != cls->knode.sel->off)
+ if (next[i].sel.offoff != cls->knode.sel->offoff ||
+ next[i].sel.offshift != cls->knode.sel->offshift ||
+ next[i].sel.offmask != cls->knode.sel->offmask ||
+ next[i].sel.off != cls->knode.sel->off)
continue;
/* Found a possible candidate. Find a key that
@@ -246,9 +246,9 @@ int cxgb4_config_knode(struct net_device *dev, __be16 protocol,
val = cls->knode.sel->keys[j].val;
mask = cls->knode.sel->keys[j].mask;
- if (next[i].match_off == off &&
- next[i].match_val == val &&
- next[i].match_mask == mask) {
+ if (next[i].key.off == off &&
+ next[i].key.val == val &&
+ next[i].key.mask == mask) {
found = true;
break;
}
diff --git a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_u32_parse.h b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_u32_parse.h
index a4b99edcc3399..141085e159e57 100644
--- a/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_u32_parse.h
+++ b/drivers/net/ethernet/chelsio/cxgb4/cxgb4_tc_u32_parse.h
@@ -38,12 +38,12 @@
struct cxgb4_match_field {
int off; /* Offset from the beginning of the header to match */
/* Fill the value/mask pair in the spec if matched */
- int (*val)(struct ch_filter_specification *f, u32 val, u32 mask);
+ int (*val)(struct ch_filter_specification *f, __be32 val, __be32 mask);
};
/* IPv4 match fields */
static inline int cxgb4_fill_ipv4_tos(struct ch_filter_specification *f,
- u32 val, u32 mask)
+ __be32 val, __be32 mask)
{
f->val.tos = (ntohl(val) >> 16) & 0x000000FF;
f->mask.tos = (ntohl(mask) >> 16) & 0x000000FF;
@@ -52,7 +52,7 @@ static inline int cxgb4_fill_ipv4_tos(struct ch_filter_specification *f,
}
static inline int cxgb4_fill_ipv4_frag(struct ch_filter_specification *f,
- u32 val, u32 mask)
+ __be32 val, __be32 mask)
{
u32 mask_val;
u8 frag_val;
@@ -74,7 +74,7 @@ static inline int cxgb4_fill_ipv4_frag(struct ch_filter_specification *f,
}
static inline int cxgb4_fill_ipv4_proto(struct ch_filter_specification *f,
- u32 val, u32 mask)
+ __be32 val, __be32 mask)
{
f->val.proto = (ntohl(val) >> 16) & 0x000000FF;
f->mask.proto = (ntohl(mask) >> 16) & 0x000000FF;
@@ -83,7 +83,7 @@ static inline int cxgb4_fill_ipv4_proto(struct ch_filter_specification *f,
}
static inline int cxgb4_fill_ipv4_src_ip(struct ch_filter_specification *f,
- u32 val, u32 mask)
+ __be32 val, __be32 mask)
{
memcpy(&f->val.fip[0], &val, sizeof(u32));
memcpy(&f->mask.fip[0], &mask, sizeof(u32));
@@ -92,7 +92,7 @@ static inline int cxgb4_fill_ipv4_src_ip(struct ch_filter_specification *f,
}
static inline int cxgb4_fill_ipv4_dst_ip(struct ch_filter_specification *f,
- u32 val, u32 mask)
+ __be32 val, __be32 mask)
{
memcpy(&f->val.lip[0], &val, sizeof(u32));
memcpy(&f->mask.lip[0], &mask, sizeof(u32));
@@ -111,7 +111,7 @@ static const struct cxgb4_match_field cxgb4_ipv4_fields[] = {
/* IPv6 match fields */
static inline int cxgb4_fill_ipv6_tos(struct ch_filter_specification *f,
- u32 val, u32 mask)
+ __be32 val, __be32 mask)
{
f->val.tos = (ntohl(val) >> 20) & 0x000000FF;
f->mask.tos = (ntohl(mask) >> 20) & 0x000000FF;
@@ -120,7 +120,7 @@ static inline int cxgb4_fill_ipv6_tos(struct ch_filter_specification *f,
}
static inline int cxgb4_fill_ipv6_proto(struct ch_filter_specification *f,
- u32 val, u32 mask)
+ __be32 val, __be32 mask)
{
f->val.proto = (ntohl(val) >> 8) & 0x000000FF;
f->mask.proto = (ntohl(mask) >> 8) & 0x000000FF;
@@ -129,7 +129,7 @@ static inline int cxgb4_fill_ipv6_proto(struct ch_filter_specification *f,
}
static inline int cxgb4_fill_ipv6_src_ip0(struct ch_filter_specification *f,
- u32 val, u32 mask)
+ __be32 val, __be32 mask)
{
memcpy(&f->val.fip[0], &val, sizeof(u32));
memcpy(&f->mask.fip[0], &mask, sizeof(u32));
@@ -138,7 +138,7 @@ static inline int cxgb4_fill_ipv6_src_ip0(struct ch_filter_specification *f,
}
static inline int cxgb4_fill_ipv6_src_ip1(struct ch_filter_specification *f,
- u32 val, u32 mask)
+ __be32 val, __be32 mask)
{
memcpy(&f->val.fip[4], &val, sizeof(u32));
memcpy(&f->mask.fip[4], &mask, sizeof(u32));
@@ -147,7 +147,7 @@ static inline int cxgb4_fill_ipv6_src_ip1(struct ch_filter_specification *f,
}
static inline int cxgb4_fill_ipv6_src_ip2(struct ch_filter_specification *f,
- u32 val, u32 mask)
+ __be32 val, __be32 mask)
{
memcpy(&f->val.fip[8], &val, sizeof(u32));
memcpy(&f->mask.fip[8], &mask, sizeof(u32));
@@ -156,7 +156,7 @@ static inline int cxgb4_fill_ipv6_src_ip2(struct ch_filter_specification *f,
}
static inline int cxgb4_fill_ipv6_src_ip3(struct ch_filter_specification *f,
- u32 val, u32 mask)
+ __be32 val, __be32 mask)
{
memcpy(&f->val.fip[12], &val, sizeof(u32));
memcpy(&f->mask.fip[12], &mask, sizeof(u32));
@@ -165,7 +165,7 @@ static inline int cxgb4_fill_ipv6_src_ip3(struct ch_filter_specification *f,
}
static inline int cxgb4_fill_ipv6_dst_ip0(struct ch_filter_specification *f,
- u32 val, u32 mask)
+ __be32 val, __be32 mask)
{
memcpy(&f->val.lip[0], &val, sizeof(u32));
memcpy(&f->mask.lip[0], &mask, sizeof(u32));
@@ -174,7 +174,7 @@ static inline int cxgb4_fill_ipv6_dst_ip0(struct ch_filter_specification *f,
}
static inline int cxgb4_fill_ipv6_dst_ip1(struct ch_filter_specification *f,
- u32 val, u32 mask)
+ __be32 val, __be32 mask)
{
memcpy(&f->val.lip[4], &val, sizeof(u32));
memcpy(&f->mask.lip[4], &mask, sizeof(u32));
@@ -183,7 +183,7 @@ static inline int cxgb4_fill_ipv6_dst_ip1(struct ch_filter_specification *f,
}
static inline int cxgb4_fill_ipv6_dst_ip2(struct ch_filter_specification *f,
- u32 val, u32 mask)
+ __be32 val, __be32 mask)
{
memcpy(&f->val.lip[8], &val, sizeof(u32));
memcpy(&f->mask.lip[8], &mask, sizeof(u32));
@@ -192,7 +192,7 @@ static inline int cxgb4_fill_ipv6_dst_ip2(struct ch_filter_specification *f,
}
static inline int cxgb4_fill_ipv6_dst_ip3(struct ch_filter_specification *f,
- u32 val, u32 mask)
+ __be32 val, __be32 mask)
{
memcpy(&f->val.lip[12], &val, sizeof(u32));
memcpy(&f->mask.lip[12], &mask, sizeof(u32));
@@ -216,7 +216,7 @@ static const struct cxgb4_match_field cxgb4_ipv6_fields[] = {
/* TCP/UDP match */
static inline int cxgb4_fill_l4_ports(struct ch_filter_specification *f,
- u32 val, u32 mask)
+ __be32 val, __be32 mask)
{
f->val.fport = ntohl(val) >> 16;
f->mask.fport = ntohl(mask) >> 16;
@@ -237,19 +237,13 @@ static const struct cxgb4_match_field cxgb4_udp_fields[] = {
};
struct cxgb4_next_header {
- unsigned int offset; /* Offset to next header */
- /* offset, shift, and mask added to offset above
+ /* Offset, shift, and mask added to beginning of the header
* to get to next header. Useful when using a header
* field's value to jump to next header such as IHL field
* in IPv4 header.
*/
- unsigned int offoff;
- u32 shift;
- u32 mask;
- /* match criteria to make this jump */
- unsigned int match_off;
- u32 match_val;
- u32 match_mask;
+ struct tc_u32_sel sel;
+ struct tc_u32_key key;
/* location of jump to make */
const struct cxgb4_match_field *jump;
};
@@ -258,26 +252,74 @@ struct cxgb4_next_header {
* IPv4 header.
*/
static const struct cxgb4_next_header cxgb4_ipv4_jumps[] = {
- { .offset = 0, .offoff = 0, .shift = 6, .mask = 0xF,
- .match_off = 8, .match_val = 0x600, .match_mask = 0xFF00,
- .jump = cxgb4_tcp_fields },
- { .offset = 0, .offoff = 0, .shift = 6, .mask = 0xF,
- .match_off = 8, .match_val = 0x1100, .match_mask = 0xFF00,
- .jump = cxgb4_udp_fields },
- { .jump = NULL }
+ {
+ /* TCP Jump */
+ .sel = {
+ .off = 0,
+ .offoff = 0,
+ .offshift = 6,
+ .offmask = cpu_to_be16(0x0f00),
+ },
+ .key = {
+ .off = 8,
+ .val = cpu_to_be32(0x00060000),
+ .mask = cpu_to_be32(0x00ff0000),
+ },
+ .jump = cxgb4_tcp_fields,
+ },
+ {
+ /* UDP Jump */
+ .sel = {
+ .off = 0,
+ .offoff = 0,
+ .offshift = 6,
+ .offmask = cpu_to_be16(0x0f00),
+ },
+ .key = {
+ .off = 8,
+ .val = cpu_to_be32(0x00110000),
+ .mask = cpu_to_be32(0x00ff0000),
+ },
+ .jump = cxgb4_udp_fields,
+ },
+ { .jump = NULL },
};
/* Accept a rule with a jump directly past the 40 Bytes of IPv6 fixed header
* to get to transport layer header.
*/
static const struct cxgb4_next_header cxgb4_ipv6_jumps[] = {
- { .offset = 0x28, .offoff = 0, .shift = 0, .mask = 0,
- .match_off = 4, .match_val = 0x60000, .match_mask = 0xFF0000,
- .jump = cxgb4_tcp_fields },
- { .offset = 0x28, .offoff = 0, .shift = 0, .mask = 0,
- .match_off = 4, .match_val = 0x110000, .match_mask = 0xFF0000,
- .jump = cxgb4_udp_fields },
- { .jump = NULL }
+ {
+ /* TCP Jump */
+ .sel = {
+ .off = 40,
+ .offoff = 0,
+ .offshift = 0,
+ .offmask = 0,
+ },
+ .key = {
+ .off = 4,
+ .val = cpu_to_be32(0x00000600),
+ .mask = cpu_to_be32(0x0000ff00),
+ },
+ .jump = cxgb4_tcp_fields,
+ },
+ {
+ /* UDP Jump */
+ .sel = {
+ .off = 40,
+ .offoff = 0,
+ .offshift = 0,
+ .offmask = 0,
+ },
+ .key = {
+ .off = 4,
+ .val = cpu_to_be32(0x00001100),
+ .mask = cpu_to_be32(0x0000ff00),
+ },
+ .jump = cxgb4_udp_fields,
+ },
+ { .jump = NULL },
};
struct cxgb4_link {
--
2.25.1
From: Chu Lin <[email protected]>
[ Upstream commit 016983d138cbe99a5c0aaae0103ee88f5300beb3 ]
Per the datasheet for max6697, OVERT mask and ALERT mask are different.
For example, the 7th bit of OVERT is the local channel but for alert
mask, the 6th bit is the local channel. Therefore, we can't apply the
same mask for both registers. In addition to that, the max6697 driver
is supposed to be compatibale with different models. I manually went over
all the listed chips and made sure all chip types have the same layout.
Testing;
mask value of 0x9 should map to 0x44 for ALERT and 0x84 for OVERT.
I used iotool to read the reg value back to verify. I only tested this
change on max6581.
Reference:
https://datasheets.maximintegrated.com/en/ds/MAX6581.pdf
https://datasheets.maximintegrated.com/en/ds/MAX6697.pdf
https://datasheets.maximintegrated.com/en/ds/MAX6699.pdf
Signed-off-by: Chu Lin <[email protected]>
Fixes: 5372d2d71c46e ("hwmon: Driver for Maxim MAX6697 and compatibles")
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hwmon/max6697.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/hwmon/max6697.c b/drivers/hwmon/max6697.c
index f03a71722849a..d4bb3d6aaf18c 100644
--- a/drivers/hwmon/max6697.c
+++ b/drivers/hwmon/max6697.c
@@ -46,8 +46,9 @@ static const u8 MAX6697_REG_CRIT[] = {
* Map device tree / platform data register bit map to chip bit map.
* Applies to alert register and over-temperature register.
*/
-#define MAX6697_MAP_BITS(reg) ((((reg) & 0x7e) >> 1) | \
+#define MAX6697_ALERT_MAP_BITS(reg) ((((reg) & 0x7e) >> 1) | \
(((reg) & 0x01) << 6) | ((reg) & 0x80))
+#define MAX6697_OVERT_MAP_BITS(reg) (((reg) >> 1) | (((reg) & 0x01) << 7))
#define MAX6697_REG_STAT(n) (0x44 + (n))
@@ -586,12 +587,12 @@ static int max6697_init_chip(struct max6697_data *data,
return ret;
ret = i2c_smbus_write_byte_data(client, MAX6697_REG_ALERT_MASK,
- MAX6697_MAP_BITS(pdata->alert_mask));
+ MAX6697_ALERT_MAP_BITS(pdata->alert_mask));
if (ret < 0)
return ret;
ret = i2c_smbus_write_byte_data(client, MAX6697_REG_OVERT_MASK,
- MAX6697_MAP_BITS(pdata->over_temperature_mask));
+ MAX6697_OVERT_MAP_BITS(pdata->over_temperature_mask));
if (ret < 0)
return ret;
--
2.25.1
From: Misono Tomohiro <[email protected]>
[ Upstream commit 8b97f9922211c44a739c5cbd9502ecbb9f17f6d1 ]
Although it rarely happens, we should call free_capabilities()
if error happens after read_capabilities() to free allocated strings.
Fixes: de584afa5e188 ("hwmon driver for ACPI 4.0 power meters")
Signed-off-by: Misono Tomohiro <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Guenter Roeck <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/hwmon/acpi_power_meter.c | 4 +++-
1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/drivers/hwmon/acpi_power_meter.c b/drivers/hwmon/acpi_power_meter.c
index e27f7e12c05bb..9b4ad6c74041e 100644
--- a/drivers/hwmon/acpi_power_meter.c
+++ b/drivers/hwmon/acpi_power_meter.c
@@ -895,7 +895,7 @@ static int acpi_power_meter_add(struct acpi_device *device)
res = setup_attrs(resource);
if (res)
- goto exit_free;
+ goto exit_free_capability;
resource->hwmon_dev = hwmon_device_register(&device->dev);
if (IS_ERR(resource->hwmon_dev)) {
@@ -908,6 +908,8 @@ static int acpi_power_meter_add(struct acpi_device *device)
exit_remove:
remove_attrs(resource);
+exit_free_capability:
+ free_capabilities(resource);
exit_free:
kfree(resource);
exit:
--
2.25.1
From: Chris Packham <[email protected]>
[ Upstream commit cd217f2300793a106b49c7dfcbfb26e348bc7593 ]
The PCA9665 datasheet says that I2CSTA = 78h indicates that SCL is stuck
low, this differs to the PCA9564 which uses 90h for this indication.
Treat either 0x78 or 0x90 as an indication that the SCL line is stuck.
Based on looking through the PCA9564 and PCA9665 datasheets this should
be safe for both chips. The PCA9564 should not return 0x78 for any valid
state and the PCA9665 should not return 0x90.
Fixes: eff9ec95efaa ("i2c-algo-pca: Add PCA9665 support")
Signed-off-by: Chris Packham <[email protected]>
Reviewed-by: Andy Shevchenko <[email protected]>
Signed-off-by: Wolfram Sang <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/i2c/algos/i2c-algo-pca.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c
index e370804ec8bc6..3a9db4626cb60 100644
--- a/drivers/i2c/algos/i2c-algo-pca.c
+++ b/drivers/i2c/algos/i2c-algo-pca.c
@@ -326,7 +326,8 @@ static int pca_xfer(struct i2c_adapter *i2c_adap,
DEB2("BUS ERROR - SDA Stuck low\n");
pca_reset(adap);
goto out;
- case 0x90: /* Bus error - SCL stuck low */
+ case 0x78: /* Bus error - SCL stuck low (PCA9665) */
+ case 0x90: /* Bus error - SCL stuck low (PCA9564) */
DEB2("BUS ERROR - SCL Stuck low\n");
pca_reset(adap);
goto out;
--
2.25.1
From: Greg Kroah-Hartman <[email protected]>
This reverts commit 5ef30e443e6d3654cccecec99cf481a69a0a6d3b which is
commit f0bd62b64016508938df9babe47f65c2c727d25c upstream.
It causes a number of reported issues and a fix for it has not hit
Linus's tree yet. Revert this to resolve those problems.
Cc: Alexander Tsoy <[email protected]>
Cc: Takashi Iwai <[email protected]>
Cc: Sasha Levin <[email protected]>
Cc: Hans de Goede <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
sound/usb/card.h | 4 ----
sound/usb/endpoint.c | 43 +++++--------------------------------------
sound/usb/endpoint.h | 1 -
sound/usb/pcm.c | 2 --
4 files changed, 5 insertions(+), 45 deletions(-)
--- a/sound/usb/card.h
+++ b/sound/usb/card.h
@@ -80,10 +80,6 @@ struct snd_usb_endpoint {
dma_addr_t sync_dma; /* DMA address of syncbuf */
unsigned int pipe; /* the data i/o pipe */
- unsigned int framesize[2]; /* small/large frame sizes in samples */
- unsigned int sample_rem; /* remainder from division fs/fps */
- unsigned int sample_accum; /* sample accumulator */
- unsigned int fps; /* frames per second */
unsigned int freqn; /* nominal sampling rate in fs/fps in Q16.16 format */
unsigned int freqm; /* momentary sampling rate in fs/fps in Q16.16 format */
int freqshift; /* how much to shift the feedback value to get Q16.16 */
--- a/sound/usb/endpoint.c
+++ b/sound/usb/endpoint.c
@@ -137,12 +137,12 @@ int snd_usb_endpoint_implicit_feedback_s
/*
* For streaming based on information derived from sync endpoints,
- * prepare_outbound_urb_sizes() will call slave_next_packet_size() to
+ * prepare_outbound_urb_sizes() will call next_packet_size() to
* determine the number of samples to be sent in the next packet.
*
- * For implicit feedback, slave_next_packet_size() is unused.
+ * For implicit feedback, next_packet_size() is unused.
*/
-int snd_usb_endpoint_slave_next_packet_size(struct snd_usb_endpoint *ep)
+int snd_usb_endpoint_next_packet_size(struct snd_usb_endpoint *ep)
{
unsigned long flags;
int ret;
@@ -159,29 +159,6 @@ int snd_usb_endpoint_slave_next_packet_s
return ret;
}
-/*
- * For adaptive and synchronous endpoints, prepare_outbound_urb_sizes()
- * will call next_packet_size() to determine the number of samples to be
- * sent in the next packet.
- */
-int snd_usb_endpoint_next_packet_size(struct snd_usb_endpoint *ep)
-{
- int ret;
-
- if (ep->fill_max)
- return ep->maxframesize;
-
- ep->sample_accum += ep->sample_rem;
- if (ep->sample_accum >= ep->fps) {
- ep->sample_accum -= ep->fps;
- ret = ep->framesize[1];
- } else {
- ret = ep->framesize[0];
- }
-
- return ret;
-}
-
static void retire_outbound_urb(struct snd_usb_endpoint *ep,
struct snd_urb_ctx *urb_ctx)
{
@@ -226,8 +203,6 @@ static void prepare_silent_urb(struct sn
if (ctx->packet_size[i])
counts = ctx->packet_size[i];
- else if (ep->sync_master)
- counts = snd_usb_endpoint_slave_next_packet_size(ep);
else
counts = snd_usb_endpoint_next_packet_size(ep);
@@ -900,17 +875,10 @@ int snd_usb_endpoint_set_params(struct s
ep->maxpacksize = fmt->maxpacksize;
ep->fill_max = !!(fmt->attributes & UAC_EP_CS_ATTR_FILL_MAX);
- if (snd_usb_get_speed(ep->chip->dev) == USB_SPEED_FULL) {
+ if (snd_usb_get_speed(ep->chip->dev) == USB_SPEED_FULL)
ep->freqn = get_usb_full_speed_rate(rate);
- ep->fps = 1000;
- } else {
+ else
ep->freqn = get_usb_high_speed_rate(rate);
- ep->fps = 8000;
- }
-
- ep->sample_rem = rate % ep->fps;
- ep->framesize[0] = rate / ep->fps;
- ep->framesize[1] = (rate + (ep->fps - 1)) / ep->fps;
/* calculate the frequency in 16.16 format */
ep->freqm = ep->freqn;
@@ -969,7 +937,6 @@ int snd_usb_endpoint_start(struct snd_us
ep->active_mask = 0;
ep->unlink_mask = 0;
ep->phase = 0;
- ep->sample_accum = 0;
snd_usb_endpoint_start_quirk(ep);
--- a/sound/usb/endpoint.h
+++ b/sound/usb/endpoint.h
@@ -27,7 +27,6 @@ void snd_usb_endpoint_release(struct snd
void snd_usb_endpoint_free(struct snd_usb_endpoint *ep);
int snd_usb_endpoint_implicit_feedback_sink(struct snd_usb_endpoint *ep);
-int snd_usb_endpoint_slave_next_packet_size(struct snd_usb_endpoint *ep);
int snd_usb_endpoint_next_packet_size(struct snd_usb_endpoint *ep);
void snd_usb_handle_sync_urb(struct snd_usb_endpoint *ep,
--- a/sound/usb/pcm.c
+++ b/sound/usb/pcm.c
@@ -1483,8 +1483,6 @@ static void prepare_playback_urb(struct
for (i = 0; i < ctx->packets; i++) {
if (ctx->packet_size[i])
counts = ctx->packet_size[i];
- else if (ep->sync_master)
- counts = snd_usb_endpoint_slave_next_packet_size(ep);
else
counts = snd_usb_endpoint_next_packet_size(ep);
From: Hauke Mehrtens <[email protected]>
commit fcec538ef8cca0ad0b84432235dccd9059c8e6f8 upstream.
This resolves the hazard between the mtc0 in the change_c0_status() and
the mfc0 in configure_exception_vector(). Without resolving this hazard
configure_exception_vector() could read an old value and would restore
this old value again. This would revert the changes change_c0_status()
did. I checked this by printing out the read_c0_status() at the end of
per_cpu_trap_init() and the ST0_MX is not set without this patch.
The hazard is documented in the MIPS Architecture Reference Manual Vol.
III: MIPS32/microMIPS32 Privileged Resource Architecture (MD00088), rev
6.03 table 8.1 which includes:
Producer | Consumer | Hazard
----------|----------|----------------------------
mtc0 | mfc0 | any coprocessor 0 register
I saw this hazard on an Atheros AR9344 rev 2 SoC with a MIPS 74Kc CPU.
There the change_c0_status() function would activate the DSPen by
setting ST0_MX in the c0_status register. This was reverted and then the
system got a DSP exception when the DSP registers were saved in
save_dsp() in the first process switch. The crash looks like this:
[ 0.089999] Mount-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.097796] Mountpoint-cache hash table entries: 1024 (order: 0, 4096 bytes, linear)
[ 0.107070] Kernel panic - not syncing: Unexpected DSP exception
[ 0.113470] Rebooting in 1 seconds..
We saw this problem in OpenWrt only on the MIPS 74Kc based Atheros SoCs,
not on the 24Kc based SoCs. We only saw it with kernel 5.4 not with
kernel 4.19, in addition we had to use GCC 8.4 or 9.X, with GCC 8.3 it
did not happen.
In the kernel I bisected this problem to commit 9012d011660e ("compiler:
allow all arches to enable CONFIG_OPTIMIZE_INLINING"), but when this was
reverted it also happened after commit 172dcd935c34b ("MIPS: Always
allocate exception vector for MIPSr2+").
Commit 0b24cae4d535 ("MIPS: Add missing EHB in mtc0 -> mfc0 sequence.")
does similar changes to a different file. I am not sure if there are
more places affected by this problem.
Signed-off-by: Hauke Mehrtens <[email protected]>
Cc: <[email protected]>
Signed-off-by: Thomas Bogendoerfer <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
arch/mips/kernel/traps.c | 1 +
1 file changed, 1 insertion(+)
--- a/arch/mips/kernel/traps.c
+++ b/arch/mips/kernel/traps.c
@@ -2137,6 +2137,7 @@ static void configure_status(void)
change_c0_status(ST0_CU|ST0_MX|ST0_RE|ST0_FR|ST0_BEV|ST0_TS|ST0_KX|ST0_SX|ST0_UX,
status_set);
+ back_to_back_c0_hazard();
}
unsigned int hwrena;
From: Hugh Dickins <[email protected]>
[ Upstream commit 243bce09c91b0145aeaedd5afba799d81841c030 ]
Chris Murphy reports that a slightly overcommitted load, testing swap
and zram along with i915, splats and keeps on splatting, when it had
better fail less noisily:
gnome-shell: page allocation failure: order:0,
mode:0x400d0(__GFP_IO|__GFP_FS|__GFP_COMP|__GFP_RECLAIMABLE),
nodemask=(null),cpuset=/,mems_allowed=0
CPU: 2 PID: 1155 Comm: gnome-shell Not tainted 5.7.0-1.fc33.x86_64 #1
Call Trace:
dump_stack+0x64/0x88
warn_alloc.cold+0x75/0xd9
__alloc_pages_slowpath.constprop.0+0xcfa/0xd30
__alloc_pages_nodemask+0x2df/0x320
alloc_slab_page+0x195/0x310
allocate_slab+0x3c5/0x440
___slab_alloc+0x40c/0x5f0
__slab_alloc+0x1c/0x30
kmem_cache_alloc+0x20e/0x220
xas_nomem+0x28/0x70
add_to_swap_cache+0x321/0x400
__read_swap_cache_async+0x105/0x240
swap_cluster_readahead+0x22c/0x2e0
shmem_swapin+0x8e/0xc0
shmem_swapin_page+0x196/0x740
shmem_getpage_gfp+0x3a2/0xa60
shmem_read_mapping_page_gfp+0x32/0x60
shmem_get_pages+0x155/0x5e0 [i915]
__i915_gem_object_get_pages+0x68/0xa0 [i915]
i915_vma_pin+0x3fe/0x6c0 [i915]
eb_add_vma+0x10b/0x2c0 [i915]
i915_gem_do_execbuffer+0x704/0x3430 [i915]
i915_gem_execbuffer2_ioctl+0x1ea/0x3e0 [i915]
drm_ioctl_kernel+0x86/0xd0 [drm]
drm_ioctl+0x206/0x390 [drm]
ksys_ioctl+0x82/0xc0
__x64_sys_ioctl+0x16/0x20
do_syscall_64+0x5b/0xf0
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Reported on 5.7, but it goes back really to 3.1: when
shmem_read_mapping_page_gfp() was implemented for use by i915, and
allowed for __GFP_NORETRY and __GFP_NOWARN flags in most places, but
missed swapin's "& GFP_KERNEL" mask for page tree node allocation in
__read_swap_cache_async() - that was to mask off HIGHUSER_MOVABLE bits
from what page cache uses, but GFP_RECLAIM_MASK is now what's needed.
Link: https://bugzilla.kernel.org/show_bug.cgi?id=208085
Link: http://lkml.kernel.org/r/[email protected]
Fixes: 68da9f055755 ("tmpfs: pass gfp to shmem_getpage_gfp")
Signed-off-by: Hugh Dickins <[email protected]>
Reviewed-by: Vlastimil Babka <[email protected]>
Reviewed-by: Matthew Wilcox (Oracle) <[email protected]>
Reported-by: Chris Murphy <[email protected]>
Analyzed-by: Vlastimil Babka <[email protected]>
Analyzed-by: Matthew Wilcox <[email protected]>
Tested-by: Chris Murphy <[email protected]>
Cc: <[email protected]> [3.1+]
Signed-off-by: Andrew Morton <[email protected]>
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
mm/swap_state.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/mm/swap_state.c b/mm/swap_state.c
index 35d7e0ee1c77c..f5cb6b23cedaf 100644
--- a/mm/swap_state.c
+++ b/mm/swap_state.c
@@ -19,6 +19,7 @@
#include <linux/migrate.h>
#include <asm/pgtable.h>
+#include "internal.h"
/*
* swapper_space is a fiction, retained to simplify the path through
@@ -326,7 +327,7 @@ struct page *__read_swap_cache_async(swp_entry_t entry, gfp_t gfp_mask,
/*
* call radix_tree_preload() while we can wait.
*/
- err = radix_tree_maybe_preload(gfp_mask & GFP_KERNEL);
+ err = radix_tree_maybe_preload(gfp_mask & GFP_RECLAIM_MASK);
if (err)
break;
--
2.25.1
From: Borislav Petkov <[email protected]>
[ Upstream commit ee470bb25d0dcdf126f586ec0ae6dca66cb340a4 ]
Commit:
da92110dfdfa ("EDAC, amd64_edac: Extend scrub rate support to F15hM60h")
added support for F15h, model 0x60 CPUs but in doing so, missed to read
back SCRCTRL PCI config register on F15h CPUs which are *not* model
0x60. Add that read so that doing
$ cat /sys/devices/system/edac/mc/mc0/sdram_scrub_rate
can show the previously set DRAM scrub rate.
Fixes: da92110dfdfa ("EDAC, amd64_edac: Extend scrub rate support to F15hM60h")
Reported-by: Anders Andersson <[email protected]>
Signed-off-by: Borislav Petkov <[email protected]>
Cc: <[email protected]> #v4.4..
Link: https://lkml.kernel.org/r/CAKkunMbNWppx_i6xSdDHLseA2QQmGJqj_crY=NF-GZML5np4Vw@mail.gmail.com
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/edac/amd64_edac.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/edac/amd64_edac.c b/drivers/edac/amd64_edac.c
index 1c5f23224b3cb..020dd07d1c23a 100644
--- a/drivers/edac/amd64_edac.c
+++ b/drivers/edac/amd64_edac.c
@@ -243,6 +243,8 @@ static int get_scrub_rate(struct mem_ctl_info *mci)
if (pvt->model == 0x60)
amd64_read_pci_cfg(pvt->F2, F15H_M60H_SCRCTRL, &scrubval);
+ else
+ amd64_read_pci_cfg(pvt->F3, SCRCTRL, &scrubval);
} else
amd64_read_pci_cfg(pvt->F3, SCRCTRL, &scrubval);
--
2.25.1
From: Dongli Zhang <[email protected]>
[ Upstream commit 52f23478081ae0dcdb95d1650ea1e7d52d586829 ]
The slub_debug is able to fix the corrupted slab freelist/page.
However, alloc_debug_processing() only checks the validity of current
and next freepointer during allocation path. As a result, once some
objects have their freepointers corrupted, deactivate_slab() may lead to
page fault.
Below is from a test kernel module when 'slub_debug=PUF,kmalloc-128
slub_nomerge'. The test kernel corrupts the freepointer of one free
object on purpose. Unfortunately, deactivate_slab() does not detect it
when iterating the freechain.
BUG: unable to handle page fault for address: 00000000123456f8
#PF: supervisor read access in kernel mode
#PF: error_code(0x0000) - not-present page
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
... ...
RIP: 0010:deactivate_slab.isra.92+0xed/0x490
... ...
Call Trace:
___slab_alloc+0x536/0x570
__slab_alloc+0x17/0x30
__kmalloc+0x1d9/0x200
ext4_htree_store_dirent+0x30/0xf0
htree_dirblock_to_tree+0xcb/0x1c0
ext4_htree_fill_tree+0x1bc/0x2d0
ext4_readdir+0x54f/0x920
iterate_dir+0x88/0x190
__x64_sys_getdents+0xa6/0x140
do_syscall_64+0x49/0x170
entry_SYSCALL_64_after_hwframe+0x44/0xa9
Therefore, this patch adds extra consistency check in deactivate_slab().
Once an object's freepointer is corrupted, all following objects
starting at this object are isolated.
[[email protected]: fix build with CONFIG_SLAB_DEBUG=n]
Signed-off-by: Dongli Zhang <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Cc: Joe Jin <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
mm/slub.c | 27 +++++++++++++++++++++++++++
1 file changed, 27 insertions(+)
diff --git a/mm/slub.c b/mm/slub.c
index 3d45713187a47..c20c87099a99d 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -624,6 +624,20 @@ static void slab_fix(struct kmem_cache *s, char *fmt, ...)
va_end(args);
}
+static bool freelist_corrupted(struct kmem_cache *s, struct page *page,
+ void *freelist, void *nextfree)
+{
+ if ((s->flags & SLAB_CONSISTENCY_CHECKS) &&
+ !check_valid_pointer(s, page, nextfree)) {
+ object_err(s, page, freelist, "Freechain corrupt");
+ freelist = NULL;
+ slab_fix(s, "Isolate corrupted freechain");
+ return true;
+ }
+
+ return false;
+}
+
static void print_trailer(struct kmem_cache *s, struct page *page, u8 *p)
{
unsigned int off; /* Offset of last byte */
@@ -1305,6 +1319,11 @@ static inline void inc_slabs_node(struct kmem_cache *s, int node,
static inline void dec_slabs_node(struct kmem_cache *s, int node,
int objects) {}
+static bool freelist_corrupted(struct kmem_cache *s, struct page *page,
+ void *freelist, void *nextfree)
+{
+ return false;
+}
#endif /* CONFIG_SLUB_DEBUG */
/*
@@ -2016,6 +2035,14 @@ static void deactivate_slab(struct kmem_cache *s, struct page *page,
void *prior;
unsigned long counters;
+ /*
+ * If 'nextfree' is invalid, it is possible that the object at
+ * 'freelist' is already corrupted. So isolate all objects
+ * starting at 'freelist'.
+ */
+ if (freelist_corrupted(s, page, freelist, nextfree))
+ break;
+
do {
prior = page->freelist;
counters = page->counters;
--
2.25.1
From: Qian Cai <[email protected]>
[ Upstream commit a68ee0573991e90af2f1785db309206408bad3e5 ]
There is no need to copy SLUB_STATS items from root memcg cache to new
memcg cache copies. Doing so could result in stack overruns because the
store function only accepts 0 to clear the stat and returns an error for
everything else while the show method would print out the whole stat.
Then, the mismatch of the lengths returns from show and store methods
happens in memcg_propagate_slab_attrs():
else if (root_cache->max_attr_size < ARRAY_SIZE(mbuf))
buf = mbuf;
max_attr_size is only 2 from slab_attr_store(), then, it uses mbuf[64]
in show_stat() later where a bounch of sprintf() would overrun the stack
variable. Fix it by always allocating a page of buffer to be used in
show_stat() if SLUB_STATS=y which should only be used for debug purpose.
# echo 1 > /sys/kernel/slab/fs_cache/shrink
BUG: KASAN: stack-out-of-bounds in number+0x421/0x6e0
Write of size 1 at addr ffffc900256cfde0 by task kworker/76:0/53251
Hardware name: HPE ProLiant DL385 Gen10/ProLiant DL385 Gen10, BIOS A40 07/10/2019
Workqueue: memcg_kmem_cache memcg_kmem_cache_create_func
Call Trace:
number+0x421/0x6e0
vsnprintf+0x451/0x8e0
sprintf+0x9e/0xd0
show_stat+0x124/0x1d0
alloc_slowpath_show+0x13/0x20
__kmem_cache_create+0x47a/0x6b0
addr ffffc900256cfde0 is located in stack of task kworker/76:0/53251 at offset 0 in frame:
process_one_work+0x0/0xb90
this frame has 1 object:
[32, 72) 'lockdep_map'
Memory state around the buggy address:
ffffc900256cfc80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffffc900256cfd00: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
>ffffc900256cfd80: 00 00 00 00 00 00 00 00 00 00 00 00 f1 f1 f1 f1
^
ffffc900256cfe00: 00 00 00 00 00 f2 f2 f2 00 00 00 00 00 00 00 00
ffffc900256cfe80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
==================================================================
Kernel panic - not syncing: stack-protector: Kernel stack is corrupted in: __kmem_cache_create+0x6ac/0x6b0
Workqueue: memcg_kmem_cache memcg_kmem_cache_create_func
Call Trace:
__kmem_cache_create+0x6ac/0x6b0
Fixes: 107dab5c92d5 ("slub: slub-specific propagation changes")
Signed-off-by: Qian Cai <[email protected]>
Signed-off-by: Andrew Morton <[email protected]>
Cc: Glauber Costa <[email protected]>
Cc: Christoph Lameter <[email protected]>
Cc: Pekka Enberg <[email protected]>
Cc: David Rientjes <[email protected]>
Cc: Joonsoo Kim <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Signed-off-by: Linus Torvalds <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
mm/slub.c | 3 ++-
1 file changed, 2 insertions(+), 1 deletion(-)
diff --git a/mm/slub.c b/mm/slub.c
index c20c87099a99d..454c1d550ad22 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -5526,7 +5526,8 @@ static void memcg_propagate_slab_attrs(struct kmem_cache *s)
*/
if (buffer)
buf = buffer;
- else if (root_cache->max_attr_size < ARRAY_SIZE(mbuf))
+ else if (root_cache->max_attr_size < ARRAY_SIZE(mbuf) &&
+ !IS_ENABLED(CONFIG_SLUB_STATS))
buf = mbuf;
else {
buffer = (char *) get_zeroed_page(GFP_KERNEL);
--
2.25.1
From: Douglas Anderson <[email protected]>
[ Upstream commit 440ab9e10e2e6e5fd677473ee6f9e3af0f6904d6 ]
At times when I'm using kgdb I see a splat on my console about
suspicious RCU usage. I managed to come up with a case that could
reproduce this that looked like this:
WARNING: suspicious RCU usage
5.7.0-rc4+ #609 Not tainted
-----------------------------
kernel/pid.c:395 find_task_by_pid_ns() needs rcu_read_lock() protection!
other info that might help us debug this:
rcu_scheduler_active = 2, debug_locks = 1
3 locks held by swapper/0/1:
#0: ffffff81b6b8e988 (&dev->mutex){....}-{3:3}, at: __device_attach+0x40/0x13c
#1: ffffffd01109e9e8 (dbg_master_lock){....}-{2:2}, at: kgdb_cpu_enter+0x20c/0x7ac
#2: ffffffd01109ea90 (dbg_slave_lock){....}-{2:2}, at: kgdb_cpu_enter+0x3ec/0x7ac
stack backtrace:
CPU: 7 PID: 1 Comm: swapper/0 Not tainted 5.7.0-rc4+ #609
Hardware name: Google Cheza (rev3+) (DT)
Call trace:
dump_backtrace+0x0/0x1b8
show_stack+0x1c/0x24
dump_stack+0xd4/0x134
lockdep_rcu_suspicious+0xf0/0x100
find_task_by_pid_ns+0x5c/0x80
getthread+0x8c/0xb0
gdb_serial_stub+0x9d4/0xd04
kgdb_cpu_enter+0x284/0x7ac
kgdb_handle_exception+0x174/0x20c
kgdb_brk_fn+0x24/0x30
call_break_hook+0x6c/0x7c
brk_handler+0x20/0x5c
do_debug_exception+0x1c8/0x22c
el1_sync_handler+0x3c/0xe4
el1_sync+0x7c/0x100
rpmh_rsc_probe+0x38/0x420
platform_drv_probe+0x94/0xb4
really_probe+0x134/0x300
driver_probe_device+0x68/0x100
__device_attach_driver+0x90/0xa8
bus_for_each_drv+0x84/0xcc
__device_attach+0xb4/0x13c
device_initial_probe+0x18/0x20
bus_probe_device+0x38/0x98
device_add+0x38c/0x420
If I understand properly we should just be able to blanket kgdb under
one big RCU read lock and the problem should go away. We'll add it to
the beast-of-a-function known as kgdb_cpu_enter().
With this I no longer get any splats and things seem to work fine.
Signed-off-by: Douglas Anderson <[email protected]>
Link: https://lore.kernel.org/r/20200602154729.v2.1.I70e0d4fd46d5ed2aaf0c98a355e8e1b7a5bb7e4e@changeid
Signed-off-by: Daniel Thompson <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
kernel/debug/debug_core.c | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/kernel/debug/debug_core.c b/kernel/debug/debug_core.c
index 9c939c6bf21cb..321ccdbb73649 100644
--- a/kernel/debug/debug_core.c
+++ b/kernel/debug/debug_core.c
@@ -488,6 +488,7 @@ static int kgdb_cpu_enter(struct kgdb_state *ks, struct pt_regs *regs,
arch_kgdb_ops.disable_hw_break(regs);
acquirelock:
+ rcu_read_lock();
/*
* Interrupts will be restored by the 'trap return' code, except when
* single stepping.
@@ -542,6 +543,7 @@ return_normal:
atomic_dec(&slaves_in_kgdb);
dbg_touch_watchdogs();
local_irq_restore(flags);
+ rcu_read_unlock();
return 0;
}
cpu_relax();
@@ -560,6 +562,7 @@ return_normal:
raw_spin_unlock(&dbg_master_lock);
dbg_touch_watchdogs();
local_irq_restore(flags);
+ rcu_read_unlock();
goto acquirelock;
}
@@ -677,6 +680,7 @@ kgdb_restore:
raw_spin_unlock(&dbg_master_lock);
dbg_touch_watchdogs();
local_irq_restore(flags);
+ rcu_read_unlock();
return kgdb_info[cpu].ret_state;
}
--
2.25.1
From: Filipe Manana <[email protected]>
[ Upstream commit 9fecd13202f520f3f25d5b1c313adb740fe19773 ]
When removing a block group, if we fail to delete the block group's item
from the extent tree, we jump to the 'out' label and end up decrementing
the block group's reference count once only (by 1), resulting in a counter
leak because the block group at that point was already removed from the
block group cache rbtree - so we have to decrement the reference count
twice, once for the rbtree and once for our lookup at the start of the
function.
There is a second bug where if removing the free space tree entries (the
call to remove_block_group_free_space()) fails we end up jumping to the
'out_put_group' label but end up decrementing the reference count only
once, when we should have done it twice, since we have already removed
the block group from the block group cache rbtree. This happens because
the reference count decrement for the rbtree reference happens after
attempting to remove the free space tree entries, which is far away from
the place where we remove the block group from the rbtree.
To make things less error prone, decrement the reference count for the
rbtree immediately after removing the block group from it. This also
eleminates the need for two different exit labels on error, renaming
'out_put_label' to just 'out' and removing the old 'out'.
Fixes: f6033c5e333238 ("btrfs: fix block group leak when removing fails")
CC: [email protected] # 4.4+
Reviewed-by: Nikolay Borisov <[email protected]>
Reviewed-by: Anand Jain <[email protected]>
Signed-off-by: Filipe Manana <[email protected]>
Reviewed-by: David Sterba <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/btrfs/extent-tree.c | 19 +++++++++----------
1 file changed, 9 insertions(+), 10 deletions(-)
diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index a83f353e44188..c0033a0d00787 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -10645,7 +10645,7 @@ int btrfs_remove_block_group(struct btrfs_trans_handle *trans,
path = btrfs_alloc_path();
if (!path) {
ret = -ENOMEM;
- goto out_put_group;
+ goto out;
}
/*
@@ -10684,7 +10684,7 @@ int btrfs_remove_block_group(struct btrfs_trans_handle *trans,
ret = btrfs_orphan_add(trans, inode);
if (ret) {
btrfs_add_delayed_iput(inode);
- goto out_put_group;
+ goto out;
}
clear_nlink(inode);
/* One for the block groups ref */
@@ -10707,13 +10707,13 @@ int btrfs_remove_block_group(struct btrfs_trans_handle *trans,
ret = btrfs_search_slot(trans, tree_root, &key, path, -1, 1);
if (ret < 0)
- goto out_put_group;
+ goto out;
if (ret > 0)
btrfs_release_path(path);
if (ret == 0) {
ret = btrfs_del_item(trans, tree_root, path);
if (ret)
- goto out_put_group;
+ goto out;
btrfs_release_path(path);
}
@@ -10722,6 +10722,9 @@ int btrfs_remove_block_group(struct btrfs_trans_handle *trans,
&root->fs_info->block_group_cache_tree);
RB_CLEAR_NODE(&block_group->cache_node);
+ /* Once for the block groups rbtree */
+ btrfs_put_block_group(block_group);
+
if (root->fs_info->first_logical_byte == block_group->key.objectid)
root->fs_info->first_logical_byte = (u64)-1;
spin_unlock(&root->fs_info->block_group_cache_lock);
@@ -10871,10 +10874,7 @@ int btrfs_remove_block_group(struct btrfs_trans_handle *trans,
ret = remove_block_group_free_space(trans, root->fs_info, block_group);
if (ret)
- goto out_put_group;
-
- /* Once for the block groups rbtree */
- btrfs_put_block_group(block_group);
+ goto out;
ret = btrfs_search_slot(trans, root, &key, path, -1, 1);
if (ret > 0)
@@ -10884,10 +10884,9 @@ int btrfs_remove_block_group(struct btrfs_trans_handle *trans,
ret = btrfs_del_item(trans, root, path);
-out_put_group:
+out:
/* Once for the lookup reference */
btrfs_put_block_group(block_group);
-out:
btrfs_free_path(path);
return ret;
}
--
2.25.1
From: Vasily Averin <[email protected]>
Could you please push this patch into stable@?
it fixes memory corruption in kernels v3.5 .. v4.10
Lost .data_len definition leads to write beyond end of
struct nf_ct_h323_master. Usually it corrupts following
struct nf_conn_nat, however if nat is not loaded it corrupts
following slab object.
In mainline this problem went away in v4.11,
after commit 9f0f3ebeda47 ("netfilter: helpers: remove data_len usage
for inkernel helpers") however many stable kernels are still affected.
Fixes: 1afc56794e03 ("netfilter: nf_ct_helper: implement variable length helper private data") # v3.5
cc: [email protected]
Reviewed-by: Florian Westphal <[email protected]>
Signed-off-by: Vasily Averin <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
net/netfilter/nf_conntrack_h323_main.c | 1 +
1 file changed, 1 insertion(+)
--- a/net/netfilter/nf_conntrack_h323_main.c
+++ b/net/netfilter/nf_conntrack_h323_main.c
@@ -1225,6 +1225,7 @@ static struct nf_conntrack_helper nf_con
{
.name = "Q.931",
.me = THIS_MODULE,
+ .data_len = sizeof(struct nf_ct_h323_master),
.tuple.src.l3num = AF_INET6,
.tuple.src.u.tcp.port = cpu_to_be16(Q931_PORT),
.tuple.dst.protonum = IPPROTO_TCP,
From: Paul Aurich <[email protected]>
commit 00dfbc2f9c61185a2e662f27c45a0bb29b2a134f upstream.
Without this:
- persistent handles will only be enabled for per-user tcons if the
server advertises the 'Continuous Availabity' capability
- resilient handles would never be enabled for per-user tcons
Signed-off-by: Paul Aurich <[email protected]>
CC: Stable <[email protected]>
Signed-off-by: Steve French <[email protected]>
Reviewed-by: Aurelien Aptel <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/cifs/connect.c | 2 ++
1 file changed, 2 insertions(+)
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -4213,6 +4213,8 @@ cifs_construct_tcon(struct cifs_sb_info
vol_info->retry = master_tcon->retry;
vol_info->nocase = master_tcon->nocase;
vol_info->local_lease = master_tcon->local_lease;
+ vol_info->resilient = master_tcon->use_resilient;
+ vol_info->persistent = master_tcon->use_persistent;
vol_info->no_linux_ext = !master_tcon->unix_ext;
vol_info->sectype = master_tcon->ses->sectype;
vol_info->sign = master_tcon->ses->sign;
From: Filipe Manana <[email protected]>
[ Upstream commit 432cd2a10f1c10cead91fe706ff5dc52f06d642a ]
When running relocation of a data block group while scrub is running in
parallel, it is possible that the relocation will fail and abort the
current transaction with an -EINVAL error:
[134243.988595] BTRFS info (device sdc): found 14 extents, stage: move data extents
[134243.999871] ------------[ cut here ]------------
[134244.000741] BTRFS: Transaction aborted (error -22)
[134244.001692] WARNING: CPU: 0 PID: 26954 at fs/btrfs/ctree.c:1071 __btrfs_cow_block+0x6a7/0x790 [btrfs]
[134244.003380] Modules linked in: btrfs blake2b_generic xor raid6_pq (...)
[134244.012577] CPU: 0 PID: 26954 Comm: btrfs Tainted: G W 5.6.0-rc7-btrfs-next-58 #5
[134244.014162] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS rel-1.12.0-59-gc9ba5276e321-prebuilt.qemu.org 04/01/2014
[134244.016184] RIP: 0010:__btrfs_cow_block+0x6a7/0x790 [btrfs]
[134244.017151] Code: 48 c7 c7 (...)
[134244.020549] RSP: 0018:ffffa41607863888 EFLAGS: 00010286
[134244.021515] RAX: 0000000000000000 RBX: ffff9614bdfe09c8 RCX: 0000000000000000
[134244.022822] RDX: 0000000000000001 RSI: ffffffffb3d63980 RDI: 0000000000000001
[134244.024124] RBP: ffff961589e8c000 R08: 0000000000000000 R09: 0000000000000001
[134244.025424] R10: ffffffffc0ae5955 R11: 0000000000000000 R12: ffff9614bd530d08
[134244.026725] R13: ffff9614ced41b88 R14: ffff9614bdfe2a48 R15: 0000000000000000
[134244.028024] FS: 00007f29b63c08c0(0000) GS:ffff9615ba600000(0000) knlGS:0000000000000000
[134244.029491] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[134244.030560] CR2: 00007f4eb339b000 CR3: 0000000130d6e006 CR4: 00000000003606f0
[134244.031997] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[134244.033153] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
[134244.034484] Call Trace:
[134244.034984] btrfs_cow_block+0x12b/0x2b0 [btrfs]
[134244.035859] do_relocation+0x30b/0x790 [btrfs]
[134244.036681] ? do_raw_spin_unlock+0x49/0xc0
[134244.037460] ? _raw_spin_unlock+0x29/0x40
[134244.038235] relocate_tree_blocks+0x37b/0x730 [btrfs]
[134244.039245] relocate_block_group+0x388/0x770 [btrfs]
[134244.040228] btrfs_relocate_block_group+0x161/0x2e0 [btrfs]
[134244.041323] btrfs_relocate_chunk+0x36/0x110 [btrfs]
[134244.041345] btrfs_balance+0xc06/0x1860 [btrfs]
[134244.043382] ? btrfs_ioctl_balance+0x27c/0x310 [btrfs]
[134244.045586] btrfs_ioctl_balance+0x1ed/0x310 [btrfs]
[134244.045611] btrfs_ioctl+0x1880/0x3760 [btrfs]
[134244.049043] ? do_raw_spin_unlock+0x49/0xc0
[134244.049838] ? _raw_spin_unlock+0x29/0x40
[134244.050587] ? __handle_mm_fault+0x11b3/0x14b0
[134244.051417] ? ksys_ioctl+0x92/0xb0
[134244.052070] ksys_ioctl+0x92/0xb0
[134244.052701] ? trace_hardirqs_off_thunk+0x1a/0x1c
[134244.053511] __x64_sys_ioctl+0x16/0x20
[134244.054206] do_syscall_64+0x5c/0x280
[134244.054891] entry_SYSCALL_64_after_hwframe+0x49/0xbe
[134244.055819] RIP: 0033:0x7f29b51c9dd7
[134244.056491] Code: 00 00 00 (...)
[134244.059767] RSP: 002b:00007ffcccc1dd08 EFLAGS: 00000202 ORIG_RAX: 0000000000000010
[134244.061168] RAX: ffffffffffffffda RBX: 0000000000000001 RCX: 00007f29b51c9dd7
[134244.062474] RDX: 00007ffcccc1dda0 RSI: 00000000c4009420 RDI: 0000000000000003
[134244.063771] RBP: 0000000000000003 R08: 00005565cea4b000 R09: 0000000000000000
[134244.065032] R10: 0000000000000541 R11: 0000000000000202 R12: 00007ffcccc2060a
[134244.066327] R13: 00007ffcccc1dda0 R14: 0000000000000002 R15: 00007ffcccc1dec0
[134244.067626] irq event stamp: 0
[134244.068202] hardirqs last enabled at (0): [<0000000000000000>] 0x0
[134244.069351] hardirqs last disabled at (0): [<ffffffffb2abdedf>] copy_process+0x74f/0x2020
[134244.070909] softirqs last enabled at (0): [<ffffffffb2abdedf>] copy_process+0x74f/0x2020
[134244.072392] softirqs last disabled at (0): [<0000000000000000>] 0x0
[134244.073432] ---[ end trace bd7c03622e0b0a99 ]---
The -EINVAL error comes from the following chain of function calls:
__btrfs_cow_block() <-- aborts the transaction
btrfs_reloc_cow_block()
replace_file_extents()
get_new_location() <-- returns -EINVAL
When relocating a data block group, for each allocated extent of the block
group, we preallocate another extent (at prealloc_file_extent_cluster()),
associated with the data relocation inode, and then dirty all its pages.
These preallocated extents have, and must have, the same size that extents
from the data block group being relocated have.
Later before we start the relocation stage that updates pointers (bytenr
field of file extent items) to point to the the new extents, we trigger
writeback for the data relocation inode. The expectation is that writeback
will write the pages to the previously preallocated extents, that it
follows the NOCOW path. That is generally the case, however, if a scrub
is running it may have turned the block group that contains those extents
into RO mode, in which case writeback falls back to the COW path.
However in the COW path instead of allocating exactly one extent with the
expected size, the allocator may end up allocating several smaller extents
due to free space fragmentation - because we tell it at cow_file_range()
that the minimum allocation size can match the filesystem's sector size.
This later breaks the relocation's expectation that an extent associated
to a file extent item in the data relocation inode has the same size as
the respective extent pointed by a file extent item in another tree - in
this case the extent to which the relocation inode poins to is smaller,
causing relocation.c:get_new_location() to return -EINVAL.
For example, if we are relocating a data block group X that has a logical
address of X and the block group has an extent allocated at the logical
address X + 128KiB with a size of 64KiB:
1) At prealloc_file_extent_cluster() we allocate an extent for the data
relocation inode with a size of 64KiB and associate it to the file
offset 128KiB (X + 128KiB - X) of the data relocation inode. This
preallocated extent was allocated at block group Z;
2) A scrub running in parallel turns block group Z into RO mode and
starts scrubing its extents;
3) Relocation triggers writeback for the data relocation inode;
4) When running delalloc (btrfs_run_delalloc_range()), we try first the
NOCOW path because the data relocation inode has BTRFS_INODE_PREALLOC
set in its flags. However, because block group Z is in RO mode, the
NOCOW path (run_delalloc_nocow()) falls back into the COW path, by
calling cow_file_range();
5) At cow_file_range(), in the first iteration of the while loop we call
btrfs_reserve_extent() to allocate a 64KiB extent and pass it a minimum
allocation size of 4KiB (fs_info->sectorsize). Due to free space
fragmentation, btrfs_reserve_extent() ends up allocating two extents
of 32KiB each, each one on a different iteration of that while loop;
6) Writeback of the data relocation inode completes;
7) Relocation proceeds and ends up at relocation.c:replace_file_extents(),
with a leaf which has a file extent item that points to the data extent
from block group X, that has a logical address (bytenr) of X + 128KiB
and a size of 64KiB. Then it calls get_new_location(), which does a
lookup in the data relocation tree for a file extent item starting at
offset 128KiB (X + 128KiB - X) and belonging to the data relocation
inode. It finds a corresponding file extent item, however that item
points to an extent that has a size of 32KiB, which doesn't match the
expected size of 64KiB, resuling in -EINVAL being returned from this
function and propagated up to __btrfs_cow_block(), which aborts the
current transaction.
To fix this make sure that at cow_file_range() when we call the allocator
we pass it a minimum allocation size corresponding the desired extent size
if the inode belongs to the data relocation tree, otherwise pass it the
filesystem's sector size as the minimum allocation size.
CC: [email protected] # 4.4+
Reviewed-by: Josef Bacik <[email protected]>
Signed-off-by: Filipe Manana <[email protected]>
Signed-off-by: David Sterba <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
fs/btrfs/inode.c | 19 ++++++++++++++++++-
1 file changed, 18 insertions(+), 1 deletion(-)
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 6d63050abe214..dfc0b3adf57af 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -947,6 +947,7 @@ static noinline int cow_file_range(struct inode *inode,
u64 alloc_hint = 0;
u64 num_bytes;
unsigned long ram_size;
+ u64 min_alloc_size;
u64 cur_alloc_size;
u64 blocksize = root->sectorsize;
struct btrfs_key ins;
@@ -995,12 +996,28 @@ static noinline int cow_file_range(struct inode *inode,
alloc_hint = get_extent_allocation_hint(inode, start, num_bytes);
btrfs_drop_extent_cache(inode, start, start + num_bytes - 1, 0);
+ /*
+ * Relocation relies on the relocated extents to have exactly the same
+ * size as the original extents. Normally writeback for relocation data
+ * extents follows a NOCOW path because relocation preallocates the
+ * extents. However, due to an operation such as scrub turning a block
+ * group to RO mode, it may fallback to COW mode, so we must make sure
+ * an extent allocated during COW has exactly the requested size and can
+ * not be split into smaller extents, otherwise relocation breaks and
+ * fails during the stage where it updates the bytenr of file extent
+ * items.
+ */
+ if (root->root_key.objectid == BTRFS_DATA_RELOC_TREE_OBJECTID)
+ min_alloc_size = num_bytes;
+ else
+ min_alloc_size = root->sectorsize;
+
while (num_bytes > 0) {
unsigned long op;
cur_alloc_size = num_bytes;
ret = btrfs_reserve_extent(root, cur_alloc_size, cur_alloc_size,
- root->sectorsize, 0, alloc_hint,
+ min_alloc_size, 0, alloc_hint,
&ins, 1, 1);
if (ret < 0)
goto out_unlock;
--
2.25.1
From: Tuomas Tynkkynen <[email protected]>
[ Upstream commit b835a71ef64a61383c414d6bf2896d2c0161deca ]
Syzbot reports an use-after-free in workqueue context:
BUG: KASAN: use-after-free in mutex_unlock+0x19/0x40 kernel/locking/mutex.c:737
mutex_unlock+0x19/0x40 kernel/locking/mutex.c:737
__smsc95xx_mdio_read drivers/net/usb/smsc95xx.c:217 [inline]
smsc95xx_mdio_read+0x583/0x870 drivers/net/usb/smsc95xx.c:278
check_carrier+0xd1/0x2e0 drivers/net/usb/smsc95xx.c:644
process_one_work+0x777/0xf90 kernel/workqueue.c:2274
worker_thread+0xa8f/0x1430 kernel/workqueue.c:2420
kthread+0x2df/0x300 kernel/kthread.c:255
It looks like that smsc95xx_unbind() is freeing the structures that are
still in use by the concurrently running workqueue callback. Thus switch
to using cancel_delayed_work_sync() to ensure the work callback really
is no longer active.
Reported-by: [email protected]
Signed-off-by: Tuomas Tynkkynen <[email protected]>
Signed-off-by: David S. Miller <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/net/usb/smsc95xx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
index e719ecd69d01b..6852ebafd4d3b 100644
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -1327,7 +1327,7 @@ static void smsc95xx_unbind(struct usbnet *dev, struct usb_interface *intf)
struct smsc95xx_priv *pdata = (struct smsc95xx_priv *)(dev->data[0]);
if (pdata) {
- cancel_delayed_work(&pdata->carrier_check);
+ cancel_delayed_work_sync(&pdata->carrier_check);
netif_dbg(dev, ifdown, dev->net, "free pdata\n");
kfree(pdata);
pdata = NULL;
--
2.25.1
From: Peter Jones <[email protected]>
commit 435d1a471598752446a72ad1201b3c980526d869 upstream.
In most cases, such as CONFIG_ACPI_CUSTOM_DSDT and
CONFIG_ACPI_TABLE_UPGRADE, boot-time modifications to firmware tables
are tied to specific Kconfig options. Currently this is not the case
for modifying the ACPI SSDT via the efivar_ssdt kernel command line
option and associated EFI variable.
This patch adds CONFIG_EFI_CUSTOM_SSDT_OVERLAYS, which defaults
disabled, in order to allow enabling or disabling that feature during
the build.
Cc: <[email protected]>
Signed-off-by: Peter Jones <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Ard Biesheuvel <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
drivers/firmware/efi/Kconfig | 11 +++++++++++
drivers/firmware/efi/efi.c | 2 +-
2 files changed, 12 insertions(+), 1 deletion(-)
--- a/drivers/firmware/efi/Kconfig
+++ b/drivers/firmware/efi/Kconfig
@@ -129,6 +129,17 @@ config EFI_TEST
Say Y here to enable the runtime services support via /dev/efi_test.
If unsure, say N.
+config EFI_CUSTOM_SSDT_OVERLAYS
+ bool "Load custom ACPI SSDT overlay from an EFI variable"
+ depends on EFI_VARS && ACPI
+ default ACPI_TABLE_UPGRADE
+ help
+ Allow loading of an ACPI SSDT overlay from an EFI variable specified
+ by a kernel command line option.
+
+ See Documentation/admin-guide/acpi/ssdt-overlays.rst for more
+ information.
+
endmenu
config UEFI_CPER
--- a/drivers/firmware/efi/efi.c
+++ b/drivers/firmware/efi/efi.c
@@ -198,7 +198,7 @@ static void generic_ops_unregister(void)
efivars_unregister(&generic_efivars);
}
-#if IS_ENABLED(CONFIG_ACPI)
+#ifdef CONFIG_EFI_CUSTOM_SSDT_OVERLAYS
#define EFIVAR_SSDT_NAME_MAX 16
static char efivar_ssdt[EFIVAR_SSDT_NAME_MAX] __initdata;
static int __init efivar_ssdt_setup(char *str)
From: Zhang Xiaoxu <[email protected]>
commit 9ffad9263b467efd8f8dc7ae1941a0a655a2bab2 upstream.
When xfstest generic/035, we found the target file was deleted
if the rename return -EACESS.
In cifs_rename2, we unlink the positive target dentry if rename
failed with EACESS or EEXIST, even if the target dentry is positived
before rename. Then the existing file was deleted.
We should just delete the target file which created during the
rename.
Reported-by: Hulk Robot <[email protected]>
Signed-off-by: Zhang Xiaoxu <[email protected]>
Cc: [email protected]
Signed-off-by: Steve French <[email protected]>
Reviewed-by: Aurelien Aptel <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/cifs/inode.c | 10 ++++++++--
1 file changed, 8 insertions(+), 2 deletions(-)
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -1770,6 +1770,7 @@ cifs_rename2(struct inode *source_dir, s
FILE_UNIX_BASIC_INFO *info_buf_target;
unsigned int xid;
int rc, tmprc;
+ bool new_target = d_really_is_negative(target_dentry);
if (flags & ~RENAME_NOREPLACE)
return -EINVAL;
@@ -1846,8 +1847,13 @@ cifs_rename2(struct inode *source_dir, s
*/
unlink_target:
- /* Try unlinking the target dentry if it's not negative */
- if (d_really_is_positive(target_dentry) && (rc == -EACCES || rc == -EEXIST)) {
+ /*
+ * If the target dentry was created during the rename, try
+ * unlinking it if it's not negative
+ */
+ if (new_target &&
+ d_really_is_positive(target_dentry) &&
+ (rc == -EACCES || rc == -EEXIST)) {
if (d_is_dir(target_dentry))
tmprc = cifs_rmdir(target_dir, target_dentry);
else
From: Paul Aurich <[email protected]>
commit cc15461c73d7d044d56c47e869a215e49bd429c8 upstream.
Ensure multiuser SMB3 mounts use encryption for all users' tcons if the
mount options are configured to require encryption. Without this, only
the primary tcon and IPC tcons are guaranteed to be encrypted. Per-user
tcons would only be encrypted if the server was configured to require
encryption.
Signed-off-by: Paul Aurich <[email protected]>
CC: Stable <[email protected]>
Signed-off-by: Steve French <[email protected]>
Reviewed-by: Aurelien Aptel <[email protected]>
Signed-off-by: Greg Kroah-Hartman <[email protected]>
---
fs/cifs/connect.c | 1 +
1 file changed, 1 insertion(+)
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -4216,6 +4216,7 @@ cifs_construct_tcon(struct cifs_sb_info
vol_info->no_linux_ext = !master_tcon->unix_ext;
vol_info->sectype = master_tcon->ses->sectype;
vol_info->sign = master_tcon->ses->sign;
+ vol_info->seal = master_tcon->seal;
rc = cifs_set_vol_auth(vol_info, master_tcon->ses);
if (rc) {
From: Zqiang <[email protected]>
[ Upstream commit 28ebeb8db77035e058a510ce9bd17c2b9a009dba ]
BUG: memory leak
unreferenced object 0xffff888055046e00 (size 256):
comm "kworker/2:9", pid 2570, jiffies 4294942129 (age 1095.500s)
hex dump (first 32 bytes):
00 70 04 55 80 88 ff ff 18 bb 5a 81 ff ff ff ff .p.U......Z.....
f5 96 78 81 ff ff ff ff 37 de 8e 81 ff ff ff ff ..x.....7.......
backtrace:
[<00000000d121dccf>] kmemleak_alloc_recursive
include/linux/kmemleak.h:43 [inline]
[<00000000d121dccf>] slab_post_alloc_hook mm/slab.h:586 [inline]
[<00000000d121dccf>] slab_alloc_node mm/slub.c:2786 [inline]
[<00000000d121dccf>] slab_alloc mm/slub.c:2794 [inline]
[<00000000d121dccf>] kmem_cache_alloc_trace+0x15e/0x2d0 mm/slub.c:2811
[<000000005c3c3381>] kmalloc include/linux/slab.h:555 [inline]
[<000000005c3c3381>] usbtest_probe+0x286/0x19d0
drivers/usb/misc/usbtest.c:2790
[<000000001cec6910>] usb_probe_interface+0x2bd/0x870
drivers/usb/core/driver.c:361
[<000000007806c118>] really_probe+0x48d/0x8f0 drivers/base/dd.c:551
[<00000000a3308c3e>] driver_probe_device+0xfc/0x2a0 drivers/base/dd.c:724
[<000000003ef66004>] __device_attach_driver+0x1b6/0x240
drivers/base/dd.c:831
[<00000000eee53e97>] bus_for_each_drv+0x14e/0x1e0 drivers/base/bus.c:431
[<00000000bb0648d0>] __device_attach+0x1f9/0x350 drivers/base/dd.c:897
[<00000000838b324a>] device_initial_probe+0x1a/0x20 drivers/base/dd.c:944
[<0000000030d501c1>] bus_probe_device+0x1e1/0x280 drivers/base/bus.c:491
[<000000005bd7adef>] device_add+0x131d/0x1c40 drivers/base/core.c:2504
[<00000000a0937814>] usb_set_configuration+0xe84/0x1ab0
drivers/usb/core/message.c:2030
[<00000000e3934741>] generic_probe+0x6a/0xe0 drivers/usb/core/generic.c:210
[<0000000098ade0f1>] usb_probe_device+0x90/0xd0
drivers/usb/core/driver.c:266
[<000000007806c118>] really_probe+0x48d/0x8f0 drivers/base/dd.c:551
[<00000000a3308c3e>] driver_probe_device+0xfc/0x2a0 drivers/base/dd.c:724
Acked-by: Alan Stern <[email protected]>
Reported-by: Kyungtae Kim <[email protected]>
Signed-off-by: Zqiang <[email protected]>
Link: https://lore.kernel.org/r/[email protected]
Signed-off-by: Greg Kroah-Hartman <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/usb/misc/usbtest.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/usb/misc/usbtest.c b/drivers/usb/misc/usbtest.c
index e31f72b3a22c5..54b8e8645e0bb 100644
--- a/drivers/usb/misc/usbtest.c
+++ b/drivers/usb/misc/usbtest.c
@@ -2771,6 +2771,7 @@ static void usbtest_disconnect(struct usb_interface *intf)
usb_set_intfdata(intf, NULL);
dev_dbg(&intf->dev, "disconnect\n");
+ kfree(dev->buf);
kfree(dev);
}
--
2.25.1
From: Hou Tao <[email protected]>
[ Upstream commit e7eea44eefbdd5f0345a0a8b80a3ca1c21030d06 ]
Else there will be memory leak if alloc_disk() fails.
Fixes: 6a27b656fc02 ("block: virtio-blk: support multi virt queues per virtio-blk device")
Signed-off-by: Hou Tao <[email protected]>
Reviewed-by: Stefano Garzarella <[email protected]>
Reviewed-by: Ming Lei <[email protected]>
Signed-off-by: Jens Axboe <[email protected]>
Signed-off-by: Sasha Levin <[email protected]>
---
drivers/block/virtio_blk.c | 1 +
1 file changed, 1 insertion(+)
diff --git a/drivers/block/virtio_blk.c b/drivers/block/virtio_blk.c
index f287eec36b282..e57a1f6e39d5c 100644
--- a/drivers/block/virtio_blk.c
+++ b/drivers/block/virtio_blk.c
@@ -749,6 +749,7 @@ static int virtblk_probe(struct virtio_device *vdev)
put_disk(vblk->disk);
out_free_vq:
vdev->config->del_vqs(vdev);
+ kfree(vblk->vqs);
out_free_vblk:
kfree(vblk);
out_free_index:
--
2.25.1
On Tue, 7 Jul 2020 at 20:44, Greg Kroah-Hartman
<[email protected]> wrote:
>
> This is the start of the stable review cycle for the 4.9.230 release.
> There are 24 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 09 Jul 2020 14:57:34 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.230-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
Results from Linaro’s test farm.
No regressions on arm64, arm, x86_64, and i386.
Summary
------------------------------------------------------------------------
kernel: 4.9.230-rc1
git repo: https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git
git branch: linux-4.9.y
git commit: e3bed594af79a41cf71d9942b412663a8c6b4fad
git describe: v4.9.228-216-ge3bed594af79
Test details: https://qa-reports.linaro.org/lkft/linux-stable-rc-4.9-oe/build/v4.9.228-216-ge3bed594af79
No regressions (compared to build v4.9.228)
No fixes (compared to build v4.9.228)
Ran 29962 total tests in the following environments and test suites.
Environments
--------------
- dragonboard-410c - arm64
- hi6220-hikey - arm64
- i386
- juno-r2 - arm64
- juno-r2-compat
- juno-r2-kasan
- qemu_arm
- qemu_arm64
- qemu_i386
- qemu_x86_64
- x15 - arm
- x86_64
- x86-kasan
Test Suites
-----------
* build
* install-android-platform-tools-r2600
* install-android-platform-tools-r2800
* kselftest
* kselftest/drivers
* kselftest/filesystems
* libhugetlbfs
* linux-log-parser
* ltp-cap_bounds-tests
* ltp-commands-tests
* ltp-containers-tests
* ltp-controllers-tests
* ltp-cpuhotplug-tests
* ltp-crypto-tests
* ltp-cve-tests
* ltp-dio-tests
* ltp-fcntl-locktests-tests
* ltp-filecaps-tests
* ltp-fs-tests
* ltp-fs_bind-tests
* ltp-fs_perms_simple-tests
* ltp-fsx-tests
* ltp-hugetlb-tests
* ltp-io-tests
* ltp-ipc-tests
* ltp-math-tests
* ltp-mm-tests
* ltp-nptl-tests
* ltp-pty-tests
* ltp-sched-tests
* ltp-securebits-tests
* ltp-syscalls-tests
* perf
* v4l2-compliance
* kvm-unit-tests
* network-basic-tests
* ltp-open-posix-tests
* kselftest/net
--
Linaro LKFT
https://lkft.linaro.org
On 07/07/2020 16:13, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.230 release.
> There are 24 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 09 Jul 2020 14:57:34 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.230-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
All tests are passing for Tegra ...
Test results for stable-v4.9:
8 builds: 8 pass, 0 fail
16 boots: 16 pass, 0 fail
30 tests: 30 pass, 0 fail
Linux version: 4.9.230-rc1-ge3bed594af79
Boards tested: tegra124-jetson-tk1, tegra20-ventana,
tegra210-p2371-2180, tegra30-cardhu-a04
Cheers
Jon
--
nvpublic
On 7/7/20 9:13 AM, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.230 release.
> There are 24 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 09 Jul 2020 14:57:34 +0000.
> Anything received after that time might be too late.
>
> The whole patch series can be found in one patch at:
> https://www.kernel.org/pub/linux/kernel/v4.x/stable-review/patch-4.9.230-rc1.gz
> or in the git tree and branch at:
> git://git.kernel.org/pub/scm/linux/kernel/git/stable/linux-stable-rc.git linux-4.9.y
> and the diffstat can be found below.
>
> thanks,
>
> greg k-h
>
>
Compiled and booted on my test system. No dmesg regressions.
thanks,
-- Shuah
On Tue, Jul 07, 2020 at 05:13:32PM +0200, Greg Kroah-Hartman wrote:
> This is the start of the stable review cycle for the 4.9.230 release.
> There are 24 patches in this series, all will be posted as a response
> to this one. If anyone has any issues with these being applied, please
> let me know.
>
> Responses should be made by Thu, 09 Jul 2020 14:57:34 +0000.
> Anything received after that time might be too late.
>
Build results:
total: 171 pass: 171 fail: 0
Qemu test results:
total: 386 pass: 386 fail: 0
Guenter