Last series[1] was to add basic infrastructure support for more than
one watchpoint on Book3S powerpc. This series actually enables the 2nd
DAWR for baremetal and powervm. Kvm guest is still not supported.
v2: https://lore.kernel.org/linuxppc-dev/[email protected]/
v2->v3:
- patch #2 is new. It fixes an issue with DAWR exception constraint
- Rename dawr1 to debug-facilities-v31 in dt cpu feature, suggested
by Nick Piggin.
- Rebased to powerpc/next
[1]: https://lore.kernel.org/linuxppc-dev/[email protected]/
Ravi Bangoria (9):
powerpc/watchpoint: Fix 512 byte boundary limit
powerpc/watchpoint: Fix DAWR exception constraint
powerpc/watchpoint: Enable watchpoint functionality on power10 guest
powerpc/dt_cpu_ftrs: Add feature for 2nd DAWR
powerpc/watchpoint: Set CPU_FTR_DAWR1 based on pa-features bit
powerpc/watchpoint: Rename current H_SET_MODE DAWR macro
powerpc/watchpoint: Guest support for 2nd DAWR hcall
powerpc/watchpoint: Return available watchpoints dynamically
powerpc/watchpoint: Remove 512 byte boundary
arch/powerpc/include/asm/cputable.h | 13 ++-
arch/powerpc/include/asm/hvcall.h | 3 +-
arch/powerpc/include/asm/hw_breakpoint.h | 5 +-
arch/powerpc/include/asm/machdep.h | 2 +-
arch/powerpc/include/asm/plpar_wrappers.h | 7 +-
arch/powerpc/kernel/dawr.c | 2 +-
arch/powerpc/kernel/dt_cpu_ftrs.c | 7 ++
arch/powerpc/kernel/hw_breakpoint.c | 98 +++++++++++++++--------
arch/powerpc/kernel/prom.c | 2 +
arch/powerpc/kvm/book3s_hv.c | 2 +-
arch/powerpc/platforms/pseries/setup.c | 7 +-
11 files changed, 103 insertions(+), 45 deletions(-)
--
2.26.2
2nd DAWR can be set/unset using H_SET_MODE hcall with resource value 5.
Enable powervm guest support with that. This has no effect on kvm guest
because kvm will return error if guest does hcall with resource value 5.
Signed-off-by: Ravi Bangoria <[email protected]>
---
arch/powerpc/include/asm/hvcall.h | 1 +
arch/powerpc/include/asm/machdep.h | 2 +-
arch/powerpc/include/asm/plpar_wrappers.h | 5 +++++
arch/powerpc/kernel/dawr.c | 2 +-
arch/powerpc/platforms/pseries/setup.c | 7 +++++--
5 files changed, 13 insertions(+), 4 deletions(-)
diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h
index a7f6f1aeda6b..3f170b9496a1 100644
--- a/arch/powerpc/include/asm/hvcall.h
+++ b/arch/powerpc/include/asm/hvcall.h
@@ -357,6 +357,7 @@
#define H_SET_MODE_RESOURCE_SET_DAWR0 2
#define H_SET_MODE_RESOURCE_ADDR_TRANS_MODE 3
#define H_SET_MODE_RESOURCE_LE 4
+#define H_SET_MODE_RESOURCE_SET_DAWR1 5
/* Values for argument to H_SIGNAL_SYS_RESET */
#define H_SIGNAL_SYS_RESET_ALL -1
diff --git a/arch/powerpc/include/asm/machdep.h b/arch/powerpc/include/asm/machdep.h
index 7bcb64444a39..a90b892f0bfe 100644
--- a/arch/powerpc/include/asm/machdep.h
+++ b/arch/powerpc/include/asm/machdep.h
@@ -131,7 +131,7 @@ struct machdep_calls {
unsigned long dabrx);
/* Set DAWR for this platform, leave empty for default implementation */
- int (*set_dawr)(unsigned long dawr,
+ int (*set_dawr)(int nr, unsigned long dawr,
unsigned long dawrx);
#ifdef CONFIG_PPC32 /* XXX for now */
diff --git a/arch/powerpc/include/asm/plpar_wrappers.h b/arch/powerpc/include/asm/plpar_wrappers.h
index 93eb133d572c..d7a1acc83593 100644
--- a/arch/powerpc/include/asm/plpar_wrappers.h
+++ b/arch/powerpc/include/asm/plpar_wrappers.h
@@ -315,6 +315,11 @@ static inline long plpar_set_watchpoint0(unsigned long dawr0, unsigned long dawr
return plpar_set_mode(0, H_SET_MODE_RESOURCE_SET_DAWR0, dawr0, dawrx0);
}
+static inline long plpar_set_watchpoint1(unsigned long dawr1, unsigned long dawrx1)
+{
+ return plpar_set_mode(0, H_SET_MODE_RESOURCE_SET_DAWR1, dawr1, dawrx1);
+}
+
static inline long plpar_signal_sys_reset(long cpu)
{
return plpar_hcall_norets(H_SIGNAL_SYS_RESET, cpu);
diff --git a/arch/powerpc/kernel/dawr.c b/arch/powerpc/kernel/dawr.c
index 500f52fa4711..cdc2dccb987d 100644
--- a/arch/powerpc/kernel/dawr.c
+++ b/arch/powerpc/kernel/dawr.c
@@ -37,7 +37,7 @@ int set_dawr(int nr, struct arch_hw_breakpoint *brk)
dawrx |= (mrd & 0x3f) << (63 - 53);
if (ppc_md.set_dawr)
- return ppc_md.set_dawr(dawr, dawrx);
+ return ppc_md.set_dawr(nr, dawr, dawrx);
if (nr == 0) {
mtspr(SPRN_DAWR0, dawr);
diff --git a/arch/powerpc/platforms/pseries/setup.c b/arch/powerpc/platforms/pseries/setup.c
index 2db8469e475f..d516ee8eb7fc 100644
--- a/arch/powerpc/platforms/pseries/setup.c
+++ b/arch/powerpc/platforms/pseries/setup.c
@@ -831,12 +831,15 @@ static int pseries_set_xdabr(unsigned long dabr, unsigned long dabrx)
return plpar_hcall_norets(H_SET_XDABR, dabr, dabrx);
}
-static int pseries_set_dawr(unsigned long dawr, unsigned long dawrx)
+static int pseries_set_dawr(int nr, unsigned long dawr, unsigned long dawrx)
{
/* PAPR says we can't set HYP */
dawrx &= ~DAWRX_HYP;
- return plpar_set_watchpoint0(dawr, dawrx);
+ if (nr == 0)
+ return plpar_set_watchpoint0(dawr, dawrx);
+ else
+ return plpar_set_watchpoint1(dawr, dawrx);
}
#define CMO_CHARACTERISTICS_TOKEN 44
--
2.26.2
Power10 has removed 512 bytes boundary from match criteria. i.e. The watch
range can cross 512 bytes boundary.
Signed-off-by: Ravi Bangoria <[email protected]>
---
arch/powerpc/kernel/hw_breakpoint.c | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/powerpc/kernel/hw_breakpoint.c b/arch/powerpc/kernel/hw_breakpoint.c
index 7a66c370a105..270fbb4d01ce 100644
--- a/arch/powerpc/kernel/hw_breakpoint.c
+++ b/arch/powerpc/kernel/hw_breakpoint.c
@@ -418,8 +418,9 @@ static int hw_breakpoint_validate_len(struct arch_hw_breakpoint *hw)
if (dawr_enabled()) {
max_len = DAWR_MAX_LEN;
- /* DAWR region can't cross 512 bytes boundary */
- if (ALIGN_DOWN(start_addr, SZ_512) != ALIGN_DOWN(end_addr - 1, SZ_512))
+ /* DAWR region can't cross 512 bytes boundary on p10 predecessors */
+ if (!cpu_has_feature(CPU_FTR_ARCH_31) &&
+ (ALIGN_DOWN(start_addr, SZ_512) != ALIGN_DOWN(end_addr - 1, SZ_512)))
return -EINVAL;
} else if (IS_ENABLED(CONFIG_PPC_8xx)) {
/* 8xx can setup a range without limitation */
--
2.26.2
Current H_SET_MODE hcall macro name for setting/resetting DAWR0 is
H_SET_MODE_RESOURCE_SET_DAWR. Add suffix 0 to macro name as well.
Signed-off-by: Ravi Bangoria <[email protected]>
---
arch/powerpc/include/asm/hvcall.h | 2 +-
arch/powerpc/include/asm/plpar_wrappers.h | 2 +-
arch/powerpc/kvm/book3s_hv.c | 2 +-
3 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/include/asm/hvcall.h b/arch/powerpc/include/asm/hvcall.h
index e90c073e437e..a7f6f1aeda6b 100644
--- a/arch/powerpc/include/asm/hvcall.h
+++ b/arch/powerpc/include/asm/hvcall.h
@@ -354,7 +354,7 @@
/* Values for 2nd argument to H_SET_MODE */
#define H_SET_MODE_RESOURCE_SET_CIABR 1
-#define H_SET_MODE_RESOURCE_SET_DAWR 2
+#define H_SET_MODE_RESOURCE_SET_DAWR0 2
#define H_SET_MODE_RESOURCE_ADDR_TRANS_MODE 3
#define H_SET_MODE_RESOURCE_LE 4
diff --git a/arch/powerpc/include/asm/plpar_wrappers.h b/arch/powerpc/include/asm/plpar_wrappers.h
index 4497c8afb573..93eb133d572c 100644
--- a/arch/powerpc/include/asm/plpar_wrappers.h
+++ b/arch/powerpc/include/asm/plpar_wrappers.h
@@ -312,7 +312,7 @@ static inline long plpar_set_ciabr(unsigned long ciabr)
static inline long plpar_set_watchpoint0(unsigned long dawr0, unsigned long dawrx0)
{
- return plpar_set_mode(0, H_SET_MODE_RESOURCE_SET_DAWR, dawr0, dawrx0);
+ return plpar_set_mode(0, H_SET_MODE_RESOURCE_SET_DAWR0, dawr0, dawrx0);
}
static inline long plpar_signal_sys_reset(long cpu)
diff --git a/arch/powerpc/kvm/book3s_hv.c b/arch/powerpc/kvm/book3s_hv.c
index 6bf66649ab92..7ad692c2d7c7 100644
--- a/arch/powerpc/kvm/book3s_hv.c
+++ b/arch/powerpc/kvm/book3s_hv.c
@@ -764,7 +764,7 @@ static int kvmppc_h_set_mode(struct kvm_vcpu *vcpu, unsigned long mflags,
return H_P3;
vcpu->arch.ciabr = value1;
return H_SUCCESS;
- case H_SET_MODE_RESOURCE_SET_DAWR:
+ case H_SET_MODE_RESOURCE_SET_DAWR0:
if (!kvmppc_power8_compatible(vcpu))
return H_P2;
if (!ppc_breakpoint_available())
--
2.26.2
As per the PAPR, bit 0 of byte 64 in pa-features property indicates
availability of 2nd DAWR registers. i.e. If this bit is set, 2nd
DAWR is present, otherwise not. Host generally uses "cpu-features",
which masks "pa-features". But "cpu-features" are still not used for
guests and thus this change is mostly applicable for guests only.
Signed-off-by: Ravi Bangoria <[email protected]>
---
arch/powerpc/kernel/prom.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 9cc49f265c86..c76c09b97bc8 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -175,6 +175,8 @@ static struct ibm_pa_feature {
*/
{ .pabyte = 22, .pabit = 0, .cpu_features = CPU_FTR_TM_COMP,
.cpu_user_ftrs2 = PPC_FEATURE2_HTM_COMP | PPC_FEATURE2_HTM_NOSC_COMP },
+
+ { .pabyte = 64, .pabit = 0, .cpu_features = CPU_FTR_DAWR1 },
};
static void __init scan_features(unsigned long node, const unsigned char *ftrs,
--
2.26.2
So far Book3S Powerpc supported only one watchpoint. Power10 is
introducing 2nd DAWR. Enable 2nd DAWR support for Power10.
Availability of 2nd DAWR will depend on CPU_FTR_DAWR1.
Signed-off-by: Ravi Bangoria <[email protected]>
---
arch/powerpc/include/asm/cputable.h | 4 +++-
arch/powerpc/include/asm/hw_breakpoint.h | 5 +++--
2 files changed, 6 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/include/asm/cputable.h b/arch/powerpc/include/asm/cputable.h
index 3445c86e1f6f..36a0851a7a9b 100644
--- a/arch/powerpc/include/asm/cputable.h
+++ b/arch/powerpc/include/asm/cputable.h
@@ -633,7 +633,9 @@ enum {
* Maximum number of hw breakpoint supported on powerpc. Number of
* breakpoints supported by actual hw might be less than this.
*/
-#define HBP_NUM_MAX 1
+#define HBP_NUM_MAX 2
+#define HBP_NUM_ONE 1
+#define HBP_NUM_TWO 2
#endif /* !__ASSEMBLY__ */
diff --git a/arch/powerpc/include/asm/hw_breakpoint.h b/arch/powerpc/include/asm/hw_breakpoint.h
index cb424799da0d..d4eab1694bcd 100644
--- a/arch/powerpc/include/asm/hw_breakpoint.h
+++ b/arch/powerpc/include/asm/hw_breakpoint.h
@@ -5,10 +5,11 @@
* Copyright 2010, IBM Corporation.
* Author: K.Prasad <[email protected]>
*/
-
#ifndef _PPC_BOOK3S_64_HW_BREAKPOINT_H
#define _PPC_BOOK3S_64_HW_BREAKPOINT_H
+#include <asm/cpu_has_feature.h>
+
#ifdef __KERNEL__
struct arch_hw_breakpoint {
unsigned long address;
@@ -46,7 +47,7 @@ struct arch_hw_breakpoint {
static inline int nr_wp_slots(void)
{
- return HBP_NUM_MAX;
+ return cpu_has_feature(CPU_FTR_DAWR1) ? HBP_NUM_TWO : HBP_NUM_ONE;
}
#ifdef CONFIG_HAVE_HW_BREAKPOINT
--
2.26.2