POWER9 onwards the support for the registers HID1, HID4, HID5 has been
receded.
Although mfspr on the above registers worked in Power9, In Power10
simulator is unrecognized. Moving their assignment under the
check for machines lower than Power9
Signed-off-by: Pratik Rajesh Sampat <[email protected]>
---
arch/powerpc/platforms/powernv/idle.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/arch/powerpc/platforms/powernv/idle.c b/arch/powerpc/platforms/powernv/idle.c
index 2dd467383a88..19d94d021357 100644
--- a/arch/powerpc/platforms/powernv/idle.c
+++ b/arch/powerpc/platforms/powernv/idle.c
@@ -73,9 +73,6 @@ static int pnv_save_sprs_for_deep_states(void)
*/
uint64_t lpcr_val = mfspr(SPRN_LPCR);
uint64_t hid0_val = mfspr(SPRN_HID0);
- uint64_t hid1_val = mfspr(SPRN_HID1);
- uint64_t hid4_val = mfspr(SPRN_HID4);
- uint64_t hid5_val = mfspr(SPRN_HID5);
uint64_t hmeer_val = mfspr(SPRN_HMEER);
uint64_t msr_val = MSR_IDLE;
uint64_t psscr_val = pnv_deepest_stop_psscr_val;
@@ -117,6 +114,9 @@ static int pnv_save_sprs_for_deep_states(void)
/* Only p8 needs to set extra HID regiters */
if (!cpu_has_feature(CPU_FTR_ARCH_300)) {
+ uint64_t hid1_val = mfspr(SPRN_HID1);
+ uint64_t hid4_val = mfspr(SPRN_HID4);
+ uint64_t hid5_val = mfspr(SPRN_HID5);
rc = opal_slw_set_reg(pir, SPRN_HID1, hid1_val);
if (rc != 0)
--
2.25.4
On Fri, Jul 03, 2020 at 06:16:39PM +0530, Pratik Rajesh Sampat wrote:
> POWER9 onwards the support for the registers HID1, HID4, HID5 has been
> receded.
> Although mfspr on the above registers worked in Power9, In Power10
> simulator is unrecognized. Moving their assignment under the
> check for machines lower than Power9
>
> Signed-off-by: Pratik Rajesh Sampat <[email protected]>
Nice catch.
Reviewed-by: Gautham R. Shenoy <[email protected]>
> ---
> arch/powerpc/platforms/powernv/idle.c | 6 +++---
> 1 file changed, 3 insertions(+), 3 deletions(-)
>
> diff --git a/arch/powerpc/platforms/powernv/idle.c b/arch/powerpc/platforms/powernv/idle.c
> index 2dd467383a88..19d94d021357 100644
> --- a/arch/powerpc/platforms/powernv/idle.c
> +++ b/arch/powerpc/platforms/powernv/idle.c
> @@ -73,9 +73,6 @@ static int pnv_save_sprs_for_deep_states(void)
> */
> uint64_t lpcr_val = mfspr(SPRN_LPCR);
> uint64_t hid0_val = mfspr(SPRN_HID0);
> - uint64_t hid1_val = mfspr(SPRN_HID1);
> - uint64_t hid4_val = mfspr(SPRN_HID4);
> - uint64_t hid5_val = mfspr(SPRN_HID5);
> uint64_t hmeer_val = mfspr(SPRN_HMEER);
> uint64_t msr_val = MSR_IDLE;
> uint64_t psscr_val = pnv_deepest_stop_psscr_val;
> @@ -117,6 +114,9 @@ static int pnv_save_sprs_for_deep_states(void)
>
> /* Only p8 needs to set extra HID regiters */
> if (!cpu_has_feature(CPU_FTR_ARCH_300)) {
> + uint64_t hid1_val = mfspr(SPRN_HID1);
> + uint64_t hid4_val = mfspr(SPRN_HID4);
> + uint64_t hid5_val = mfspr(SPRN_HID5);
>
> rc = opal_slw_set_reg(pir, SPRN_HID1, hid1_val);
> if (rc != 0)
> --
> 2.25.4
>
--
Thanks and Regards
gautham.