2020-07-09 15:23:32

by Artur Rojek

[permalink] [raw]
Subject: [PATCH v8 1/6] dt-bindings: iio/adc: Convert ingenic-adc docs to YAML.

Convert the textual documentation of Device Tree bindings for the
Ingenic JZ47xx SoCs ADC controller to YAML.

The `interrupts` property is now explicitly listed and marked as
required. While missing from the previous textual documentation, this
property has been used with all the boards which probe this driver.

Signed-off-by: Artur Rojek <[email protected]>
Tested-by: Paul Cercueil <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
---

Changes:

v6: new patch

v7: - specify `maxItems: 1` for single entry properties
- get rid of redundant descriptions of said properties

v8: no change

.../bindings/iio/adc/ingenic,adc.txt | 49 -------------
.../bindings/iio/adc/ingenic,adc.yaml | 71 +++++++++++++++++++
2 files changed, 71 insertions(+), 49 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/iio/adc/ingenic,adc.txt
create mode 100644 Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml

diff --git a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.txt b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.txt
deleted file mode 100644
index cd9048cf9dcf..000000000000
--- a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.txt
+++ /dev/null
@@ -1,49 +0,0 @@
-* Ingenic JZ47xx ADC controller IIO bindings
-
-Required properties:
-
-- compatible: Should be one of:
- * ingenic,jz4725b-adc
- * ingenic,jz4740-adc
- * ingenic,jz4770-adc
-- reg: ADC controller registers location and length.
-- clocks: phandle to the SoC's ADC clock.
-- clock-names: Must be set to "adc".
-- #io-channel-cells: Must be set to <1> to indicate channels are selected
- by index.
-
-ADC clients must use the format described in iio-bindings.txt, giving
-a phandle and IIO specifier pair ("io-channels") to the ADC controller.
-
-Example:
-
-#include <dt-bindings/iio/adc/ingenic,adc.h>
-
-adc: adc@10070000 {
- compatible = "ingenic,jz4740-adc";
- #io-channel-cells = <1>;
-
- reg = <0x10070000 0x30>;
-
- clocks = <&cgu JZ4740_CLK_ADC>;
- clock-names = "adc";
-
- interrupt-parent = <&intc>;
- interrupts = <18>;
-};
-
-adc-keys {
- ...
- compatible = "adc-keys";
- io-channels = <&adc INGENIC_ADC_AUX>;
- io-channel-names = "buttons";
- ...
-};
-
-battery {
- ...
- compatible = "ingenic,jz4740-battery";
- io-channels = <&adc INGENIC_ADC_BATTERY>;
- io-channel-names = "battery";
- ...
-};
diff --git a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml
new file mode 100644
index 000000000000..9f414dbdae86
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml
@@ -0,0 +1,71 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+# Copyright 2019-2020 Artur Rojek
+%YAML 1.2
+---
+$id: "http://devicetree.org/schemas/iio/adc/ingenic,adc.yaml#"
+$schema: "http://devicetree.org/meta-schemas/core.yaml#"
+
+title: Ingenic JZ47xx ADC controller IIO bindings
+
+maintainers:
+ - Artur Rojek <[email protected]>
+
+description: >
+ Industrial I/O subsystem bindings for ADC controller found in
+ Ingenic JZ47xx SoCs.
+
+ ADC clients must use the format described in iio-bindings.txt, giving
+ a phandle and IIO specifier pair ("io-channels") to the ADC controller.
+
+properties:
+ compatible:
+ enum:
+ - ingenic,jz4725b-adc
+ - ingenic,jz4740-adc
+ - ingenic,jz4770-adc
+
+ '#io-channel-cells':
+ const: 1
+ description:
+ Must be set to <1> to indicate channels are selected by index.
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ maxItems: 1
+
+ clock-names:
+ items:
+ - const: adc
+
+ interrupts:
+ maxItems: 1
+
+required:
+ - compatible
+ - '#io-channel-cells'
+ - reg
+ - clocks
+ - clock-names
+ - interrupts
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/clock/jz4740-cgu.h>
+ #include <dt-bindings/iio/adc/ingenic,adc.h>
+
+ adc@10070000 {
+ compatible = "ingenic,jz4740-adc";
+ #io-channel-cells = <1>;
+
+ reg = <0x10070000 0x30>;
+
+ clocks = <&cgu JZ4740_CLK_ADC>;
+ clock-names = "adc";
+
+ interrupt-parent = <&intc>;
+ interrupts = <18>;
+ };
--
2.27.0


2020-07-12 11:23:18

by Jonathan Cameron

[permalink] [raw]
Subject: Re: [PATCH v8 1/6] dt-bindings: iio/adc: Convert ingenic-adc docs to YAML.

On Thu, 9 Jul 2020 17:21:55 +0200
Artur Rojek <[email protected]> wrote:

> Convert the textual documentation of Device Tree bindings for the
> Ingenic JZ47xx SoCs ADC controller to YAML.
>
> The `interrupts` property is now explicitly listed and marked as
> required. While missing from the previous textual documentation, this
> property has been used with all the boards which probe this driver.
>
> Signed-off-by: Artur Rojek <[email protected]>
> Tested-by: Paul Cercueil <[email protected]>
> Reviewed-by: Rob Herring <[email protected]>

Given this is a good change on it's own. I'll apply it before even
reading the rest of the series. If we do need to go to a v9 at least
it'll be shorter ;)

Applied to the togreg branch of iio.git and pushed out as testing
for the autobuilders to poke at it.

Thanks,

Jonathan

> ---
>
> Changes:
>
> v6: new patch
>
> v7: - specify `maxItems: 1` for single entry properties
> - get rid of redundant descriptions of said properties
>
> v8: no change
>
> .../bindings/iio/adc/ingenic,adc.txt | 49 -------------
> .../bindings/iio/adc/ingenic,adc.yaml | 71 +++++++++++++++++++
> 2 files changed, 71 insertions(+), 49 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/iio/adc/ingenic,adc.txt
> create mode 100644 Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml
>
> diff --git a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.txt b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.txt
> deleted file mode 100644
> index cd9048cf9dcf..000000000000
> --- a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.txt
> +++ /dev/null
> @@ -1,49 +0,0 @@
> -* Ingenic JZ47xx ADC controller IIO bindings
> -
> -Required properties:
> -
> -- compatible: Should be one of:
> - * ingenic,jz4725b-adc
> - * ingenic,jz4740-adc
> - * ingenic,jz4770-adc
> -- reg: ADC controller registers location and length.
> -- clocks: phandle to the SoC's ADC clock.
> -- clock-names: Must be set to "adc".
> -- #io-channel-cells: Must be set to <1> to indicate channels are selected
> - by index.
> -
> -ADC clients must use the format described in iio-bindings.txt, giving
> -a phandle and IIO specifier pair ("io-channels") to the ADC controller.
> -
> -Example:
> -
> -#include <dt-bindings/iio/adc/ingenic,adc.h>
> -
> -adc: adc@10070000 {
> - compatible = "ingenic,jz4740-adc";
> - #io-channel-cells = <1>;
> -
> - reg = <0x10070000 0x30>;
> -
> - clocks = <&cgu JZ4740_CLK_ADC>;
> - clock-names = "adc";
> -
> - interrupt-parent = <&intc>;
> - interrupts = <18>;
> -};
> -
> -adc-keys {
> - ...
> - compatible = "adc-keys";
> - io-channels = <&adc INGENIC_ADC_AUX>;
> - io-channel-names = "buttons";
> - ...
> -};
> -
> -battery {
> - ...
> - compatible = "ingenic,jz4740-battery";
> - io-channels = <&adc INGENIC_ADC_BATTERY>;
> - io-channel-names = "battery";
> - ...
> -};
> diff --git a/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml
> new file mode 100644
> index 000000000000..9f414dbdae86
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/adc/ingenic,adc.yaml
> @@ -0,0 +1,71 @@
> +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> +# Copyright 2019-2020 Artur Rojek
> +%YAML 1.2
> +---
> +$id: "http://devicetree.org/schemas/iio/adc/ingenic,adc.yaml#"
> +$schema: "http://devicetree.org/meta-schemas/core.yaml#"
> +
> +title: Ingenic JZ47xx ADC controller IIO bindings
> +
> +maintainers:
> + - Artur Rojek <[email protected]>
> +
> +description: >
> + Industrial I/O subsystem bindings for ADC controller found in
> + Ingenic JZ47xx SoCs.
> +
> + ADC clients must use the format described in iio-bindings.txt, giving
> + a phandle and IIO specifier pair ("io-channels") to the ADC controller.
> +
> +properties:
> + compatible:
> + enum:
> + - ingenic,jz4725b-adc
> + - ingenic,jz4740-adc
> + - ingenic,jz4770-adc
> +
> + '#io-channel-cells':
> + const: 1
> + description:
> + Must be set to <1> to indicate channels are selected by index.
> +
> + reg:
> + maxItems: 1
> +
> + clocks:
> + maxItems: 1
> +
> + clock-names:
> + items:
> + - const: adc
> +
> + interrupts:
> + maxItems: 1
> +
> +required:
> + - compatible
> + - '#io-channel-cells'
> + - reg
> + - clocks
> + - clock-names
> + - interrupts
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/clock/jz4740-cgu.h>
> + #include <dt-bindings/iio/adc/ingenic,adc.h>
> +
> + adc@10070000 {
> + compatible = "ingenic,jz4740-adc";
> + #io-channel-cells = <1>;
> +
> + reg = <0x10070000 0x30>;
> +
> + clocks = <&cgu JZ4740_CLK_ADC>;
> + clock-names = "adc";
> +
> + interrupt-parent = <&intc>;
> + interrupts = <18>;
> + };