esdhc0 is connected to an eMMC, so it is safe to pass the "no-sdio"/"no-sd"
properties.
esdhc1 is wired to a standard SD socket, so pass the "no-sdio" property.
Signed-off-by: Chris Healy <[email protected]>
---
arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts
b/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts
index 0bb3dcff0b79..7d4ddfb6b5b5 100644
--- a/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts
+++ b/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts
@@ -81,6 +81,8 @@
non-removable;
no-1-8-v;
keep-power-in-suspend;
+ no-sdio;
+ no-sd;
status = "okay";
};
@@ -88,6 +90,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
bus-width = <4>;
+ no-sdio;
status = "okay";
};
--
2.21.3
On Sun, Jul 5, 2020 at 12:16 AM Chris Healy <[email protected]> wrote:
>
> esdhc0 is connected to an eMMC, so it is safe to pass the "no-sdio"/"no-sd"
> properties.
>
> esdhc1 is wired to a standard SD socket, so pass the "no-sdio" property.
>
> Signed-off-by: Chris Healy <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>
On Sat, Jul 04, 2020 at 08:16:10PM -0700, Chris Healy wrote:
> esdhc0 is connected to an eMMC, so it is safe to pass the "no-sdio"/"no-sd"
> properties.
>
> esdhc1 is wired to a standard SD socket, so pass the "no-sdio" property.
>
> Signed-off-by: Chris Healy <[email protected]>
I would suggest something like below for patch subject.
ARM: dts: vf610-zii-ssmb-dtu: Add no-sdio/no-sd properties
Also the patch doesn't apply to my branch.
Shawn
> ---
> arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts | 3 +++
> 1 file changed, 3 insertions(+)
>
> diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts
> b/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts
> index 0bb3dcff0b79..7d4ddfb6b5b5 100644
> --- a/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts
> +++ b/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts
> @@ -81,6 +81,8 @@
> non-removable;
> no-1-8-v;
> keep-power-in-suspend;
> + no-sdio;
> + no-sd;
> status = "okay";
> };
>
> @@ -88,6 +90,7 @@
> pinctrl-names = "default";
> pinctrl-0 = <&pinctrl_esdhc1>;
> bus-width = <4>;
> + no-sdio;
> status = "okay";
> };
>
> --
> 2.21.3