2020-07-07 21:15:22

by Chris Healy

[permalink] [raw]
Subject: [PATCH v2] ARM: dts: vfxxx: Add node for CAAM

From: Andrey Smirnov <[email protected]>

Add node for CAAM device in NXP Vybrid SoC.

Signed-off-by: Andrey Smirnov <[email protected]>
Signed-off-by: Chris Healy <[email protected]>

v2:
- fixup commit to show that this patch is from Andrey Smirnov.

---
arch/arm/boot/dts/vfxxx.dtsi | 22 ++++++++++++++++++++++
1 file changed, 22 insertions(+)

diff --git a/arch/arm/boot/dts/vfxxx.dtsi b/arch/arm/boot/dts/vfxxx.dtsi
index 2d547e7b21ad..0fe03aa0367f 100644
--- a/arch/arm/boot/dts/vfxxx.dtsi
+++ b/arch/arm/boot/dts/vfxxx.dtsi
@@ -729,6 +729,28 @@
dma-names = "rx","tx";
status = "disabled";
};
+
+ crypto: crypto@400f0000 {
+ compatible = "fsl,sec-v4.0";
+ #address-cells = <1>;
+ #size-cells = <1>;
+ reg = <0x400f0000 0x9000>;
+ ranges = <0 0x400f0000 0x9000>;
+ clocks = <&clks VF610_CLK_CAAM>;
+ clock-names = "ipg";
+
+ sec_jr0: jr0@1000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x1000 0x1000>;
+ interrupts = <102 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ sec_jr1: jr1@2000 {
+ compatible = "fsl,sec-v4.0-job-ring";
+ reg = <0x2000 0x1000>;
+ interrupts = <102 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
};
};
};
--
2.21.3


2020-07-07 21:54:16

by Fabio Estevam

[permalink] [raw]
Subject: Re: [PATCH v2] ARM: dts: vfxxx: Add node for CAAM

Hi Chris,

On Tue, Jul 7, 2020 at 6:15 PM Chris Healy <[email protected]> wrote:
>
> From: Andrey Smirnov <[email protected]>
>
> Add node for CAAM device in NXP Vybrid SoC.
>
> Signed-off-by: Andrey Smirnov <[email protected]>
> Signed-off-by: Chris Healy <[email protected]>
>
> v2:
> - fixup commit to show that this patch is from Andrey Smirnov.

We usually put this information below the --- line.

Maybe Shawn could fix it while applying it.

Other that that:
Reviewed-by: Fabio Estevam <[email protected]>

2020-07-13 06:58:10

by Shawn Guo

[permalink] [raw]
Subject: Re: [PATCH v2] ARM: dts: vfxxx: Add node for CAAM

On Tue, Jul 07, 2020 at 06:51:00PM -0300, Fabio Estevam wrote:
> Hi Chris,
>
> On Tue, Jul 7, 2020 at 6:15 PM Chris Healy <[email protected]> wrote:
> >
> > From: Andrey Smirnov <[email protected]>
> >
> > Add node for CAAM device in NXP Vybrid SoC.
> >
> > Signed-off-by: Andrey Smirnov <[email protected]>
> > Signed-off-by: Chris Healy <[email protected]>
> >
> > v2:
> > - fixup commit to show that this patch is from Andrey Smirnov.
>
> We usually put this information below the --- line.
>
> Maybe Shawn could fix it while applying it.

Fixed and applied.