2020-07-10 02:15:23

by Peng Fan

Subject: [PATCH] ARM: imx_v6_v7_defconfig: Support i.MX8MM

From: Peng Fan <[email protected]>

i.MX8MM is built with AArch64 hardware, this is to support
it could run in Aarch32 mode with clock and pinctrl driver enabled.

Signed-off-by: Peng Fan <[email protected]>
---

To make kernel boot, needs the GIC_V3 select patch:
https://patchwork.kernel.org/patch/11655383/

arch/arm/configs/imx_v6_v7_defconfig | 3 +++
1 file changed, 3 insertions(+)

diff --git a/arch/arm/configs/imx_v6_v7_defconfig b/arch/arm/configs/imx_v6_v7_defconfig
index 87e6400c436b..cb335478ac37 100644
--- a/arch/arm/configs/imx_v6_v7_defconfig
+++ b/arch/arm/configs/imx_v6_v7_defconfig
@@ -217,6 +217,7 @@ CONFIG_SPI=y
CONFIG_SPI_GPIO=y
CONFIG_SPI_IMX=y
CONFIG_SPI_FSL_DSPI=y
+CONFIG_PINCTRL_IMX8MM=y
CONFIG_GPIO_SYSFS=y
CONFIG_GPIO_SIOX=m
CONFIG_GPIO_MAX732X=y
@@ -406,6 +407,8 @@ CONFIG_STAGING=y
CONFIG_STAGING_MEDIA=y
CONFIG_VIDEO_IMX_MEDIA=y
CONFIG_COMMON_CLK_PWM=y
+CONFIG_CLK_IMX8MM=y
+CONFIG_SOC_IMX8M=y
CONFIG_IIO=y
CONFIG_MMA8452=y
CONFIG_IMX7D_ADC=y
--
2.16.4

2020-07-13 08:45:55

by Shawn Guo

Subject: Re: [PATCH] ARM: imx_v6_v7_defconfig: Support i.MX8MM

On Fri, Jul 10, 2020 at 10:10:53AM +0800, [email protected] wrote:
> From: Peng Fan <[email protected]>
>
> i.MX8MM is built with AArch64 hardware, this is to support
> it could run in Aarch32 mode with clock and pinctrl driver enabled.
>
> Signed-off-by: Peng Fan <[email protected]>

Applied, thanks.