From: Matthias Brugger <[email protected]>
The driver relies on the compatible string from DT to determine which
FW configuration file it should load. The DTS spec allows for '/' as
part of the compatible string. We change this to '-' so that we will
still be able to load the config file, even when the compatible has a
'/'. This fixes explicitly the firmware loading for
"solidrun,cubox-i/q".
Signed-off-by: Matthias Brugger <[email protected]>
---
Changes in v3:
- use len variable to store length of string (Hans de Goede)
- fix for loop to stop on first NULL-byte (Hans de Goede)
Changes in v2:
- use strscpy instead of strncpy (Hans de Goede)
- use strlen(tmp) + 1 for allocation (Hans de Goede, kernel test robot)
.../wireless/broadcom/brcm80211/brcmfmac/of.c | 19 ++++++++++++++++---
1 file changed, 16 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
index b886b56a5e5a..a7554265f95f 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/of.c
@@ -17,7 +17,6 @@ void brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type,
{
struct brcmfmac_sdio_pd *sdio = &settings->bus.sdio;
struct device_node *root, *np = dev->of_node;
- struct property *prop;
int irq;
u32 irqf;
u32 val;
@@ -25,8 +24,22 @@ void brcmf_of_probe(struct device *dev, enum brcmf_bus_type bus_type,
/* Set board-type to the first string of the machine compatible prop */
root = of_find_node_by_path("/");
if (root) {
- prop = of_find_property(root, "compatible", NULL);
- settings->board_type = of_prop_next_string(prop, NULL);
+ int i, len;
+ char *board_type;
+ const char *tmp;
+
+ of_property_read_string_index(root, "compatible", 0, &tmp);
+
+ /* get rid of '/' in the compatible string to be able to find the FW */
+ len = strlen(tmp) + 1;
+ board_type = devm_kzalloc(dev, len, GFP_KERNEL);
+ strscpy(board_type, tmp, len);
+ for (i = 0; i < board_type[i]; i++) {
+ if (board_type[i] == '/')
+ board_type[i] = '-';
+ }
+ settings->board_type = board_type;
+
of_node_put(root);
}
--
2.27.0
[email protected] wrote:
> From: Matthias Brugger <[email protected]>
>
> The driver relies on the compatible string from DT to determine which
> FW configuration file it should load. The DTS spec allows for '/' as
> part of the compatible string. We change this to '-' so that we will
> still be able to load the config file, even when the compatible has a
> '/'. This fixes explicitly the firmware loading for
> "solidrun,cubox-i/q".
>
> Signed-off-by: Matthias Brugger <[email protected]>
> Reviewed-by: Hans deGoede <[email protected]>
Patch applied to wireless-drivers-next.git, thanks.
29e354ebeeec brcmfmac: Transform compatible string for FW loading
--
https://patchwork.kernel.org/patch/11636153/
https://wireless.wiki.kernel.org/en/developers/documentation/submittingpatches