2020-07-15 21:32:37

by Chris Healy

Subject: [PATCH v2] ARM: dts: vf610-zii-ssmb-dtu: Add no-sdio/no-sd properties

esdhc0 is connected to an eMMC, so it is safe to pass the "no-sdio"/"no-sd"
properties.

esdhc1 is wired to a standard SD socket, so pass the "no-sdio" property.

Signed-off-by: Chris Healy <[email protected]>
Reviewed-by: Fabio Estevam <[email protected]>

---
v2:
- Fix formatting so patch applies cleanly
- Add Fabio's reviewed-by
- Update subject line per Shawn's recommendation

arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts | 3 +++
1 file changed, 3 insertions(+)

diff --git a/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts b/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts
index e37b9643269b..3ecc1ad5abea 100644
--- a/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts
+++ b/arch/arm/boot/dts/vf610-zii-ssmb-dtu.dts
@@ -81,6 +81,8 @@
non-removable;
no-1-8-v;
keep-power-in-suspend;
+ no-sdio;
+ no-sd;
status = "okay";
};

@@ -88,6 +90,7 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
bus-width = <4>;
+ no-sdio;
status = "okay";
};

--
2.21.3

2020-07-20 03:22:16

by Shawn Guo

Subject: Re: [PATCH v2] ARM: dts: vf610-zii-ssmb-dtu: Add no-sdio/no-sd properties

On Wed, Jul 15, 2020 at 02:31:48PM -0700, Chris Healy wrote:
> esdhc0 is connected to an eMMC, so it is safe to pass the "no-sdio"/"no-sd"
> properties.
>
> esdhc1 is wired to a standard SD socket, so pass the "no-sdio" property.
>
> Signed-off-by: Chris Healy <[email protected]>
> Reviewed-by: Fabio Estevam <[email protected]>

Applied, thanks.