This patch adds a driver for configuration of the Microchip USB49xx/xi
USB 2.0 hub controller series with USB 2.0 upstream connectivity, SMBus
configuration interface and two to four USB 2.0 downstream ports.
Furthermore add myself as a maintainer for this driver.
The datasheet can be found at the manufacturers website, see [1]. All
device-tree exposed configuration features have been tested on a i.MX6
platform with a USB4916 hub.
[1] http://ww1.microchip.com/downloads/en/Appnotes/AN2651-Configuration-of-Microchip-USB47xx-USB49xx-Application-Note-00002651B.pdf
Signed-off-by: Christian Eggers <[email protected]>
---
MAINTAINERS | 7 +
drivers/usb/misc/Kconfig | 10 +
drivers/usb/misc/Makefile | 1 +
drivers/usb/misc/usb49xx.c | 825 +++++++++++++++++++++++++++++++++++++
4 files changed, 843 insertions(+)
create mode 100644 drivers/usb/misc/usb49xx.c
diff --git a/MAINTAINERS b/MAINTAINERS
index fe1108ba6ce7..068d6e94122b 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -11363,6 +11363,13 @@ S: Maintained
F: Documentation/devicetree/bindings/usb/usb253x.yaml
F: drivers/usb/misc/usb253x.c
+MICROCHIP USB49XX DRIVER
+M: Christian Eggers <[email protected]>
+L: [email protected]
+S: Maintained
+F: Documentation/devicetree/bindings/usb/usb49xx.yaml
+F: drivers/usb/misc/usb49xx.c
+
MICROCHIP USBA UDC DRIVER
M: Cristian Birsan <[email protected]>
L: [email protected] (moderated for non-subscribers)
diff --git a/drivers/usb/misc/Kconfig b/drivers/usb/misc/Kconfig
index 7a7b854e803a..14bea87c0f81 100644
--- a/drivers/usb/misc/Kconfig
+++ b/drivers/usb/misc/Kconfig
@@ -252,6 +252,16 @@ config USB_HUB_USB253X
Configuration parameters may be set in devicetree or platform data.
Say Y or M here if you need to configure such a device via I2C.
+config USB_HUB_USB49XX
+ tristate "USB47XX/USB49XX Hub Controller Configuration Driver"
+ depends on I2C
+ select REGMAP
+ help
+ This option enables support for configuration via I2C bus of the
+ Microchip USB47xx/49xx USB 2.0 Hub Controller series.
+ Configuration parameters may be set in devicetree or platform data.
+ Say Y or M here if you need to configure such a device via I2C.
+
config USB_HSIC_USB3503
tristate "USB3503 HSIC to USB20 Driver"
depends on I2C
diff --git a/drivers/usb/misc/Makefile b/drivers/usb/misc/Makefile
index 6fd8c53841e4..3832858aba1e 100644
--- a/drivers/usb/misc/Makefile
+++ b/drivers/usb/misc/Makefile
@@ -26,6 +26,7 @@ obj-$(CONFIG_USB_SEVSEG) += usbsevseg.o
obj-$(CONFIG_USB_YUREX) += yurex.o
obj-$(CONFIG_USB_HUB_USB251XB) += usb251xb.o
obj-$(CONFIG_USB_HUB_USB253X) += usb253x.o
+obj-$(CONFIG_USB_HUB_USB49XX) += usb49xx.o
obj-$(CONFIG_USB_HSIC_USB3503) += usb3503.o
obj-$(CONFIG_USB_HSIC_USB4604) += usb4604.o
obj-$(CONFIG_USB_CHAOSKEY) += chaoskey.o
diff --git a/drivers/usb/misc/usb49xx.c b/drivers/usb/misc/usb49xx.c
new file mode 100644
index 000000000000..b713ef4557c2
--- /dev/null
+++ b/drivers/usb/misc/usb49xx.c
@@ -0,0 +1,825 @@
+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * Driver for Microchip USB47xx and USB49xx USB 2.0 Hi-Speed Hub Controller
+ * Configuration via I2C.
+ *
+ * Copyright (c) 2020 ARRI Lighting
+ *
+ * This work is based on the USB251xb driver by Richard Leitner.
+ *
+ */
+
+#include <linux/delay.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/driver.h>
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/nls.h>
+#include <linux/of_device.h>
+#include <linux/regmap.h>
+#include <linux/regulator/consumer.h>
+#include <linux/slab.h>
+
+/* Internal Register Set Addresses acc. to DS00002651B */
+#define USB49XX_ADDR_VENDOR_ID 0xBF803000
+#define USB49XX_ADDR_PRODUCT_ID 0xBF803002
+#define USB49XX_ADDR_DEVICE_ID 0xBF803004
+#define USB49XX_ADDR_HUB_CFG 0xBF803006
+#define USB49XX_HUB_CFG3_PRTMAP_EN BIT(3)
+#define USB49XX_HUB_CFG3_STRING_EN BIT(0)
+#define USB49XX_ADDR_NON_REMOVABLE_DEVICES 0xBF803009
+#define USB49XX_ADDR_PORT_DISABLE_SELF 0xBF80300A
+#define USB49XX_ADDR_PORT_DISABLE_BUS 0xBF80300B
+#define USB49XX_ADDR_POWER_ON_TIME 0xBF803010
+#define USB49XX_ADDR_OCS_MIN_WIDTH 0xBF8030EA
+#define USB49XX_ADDR_LANGUAGE_ID 0xBF803202
+#define USB49XX_STRING_BUFSIZE 62
+#define USB49XX_ADDR_MANUFACTURER_STRING_DESC 0xBFD23204
+#define USB49XX_ADDR_PRODUCT_STRING_DESC 0xBFD23244
+#define USB49XX_ADDR_MANUFACTURER_STRING_LEN 0xBFD2346A
+#define USB49XX_ADDR_PRODUCT_STRING_LEN 0xBFD23472
+#define USB49XX_ADDR_USB2_HUB_CTRL 0xBF803104
+#define USB49XX_USB2_HUB_CTRL_LPM_DISABLE BIT(1)
+
+#define DRIVER_NAME "usb49xx"
+
+
+struct usb49xx {
+ struct device *dev;
+ struct i2c_client *i2c;
+ struct regulator *vdd;
+ struct regmap *regmap;
+ u8 skip_config;
+ struct gpio_desc *gpio_reset;
+};
+
+#ifdef CONFIG_GPIOLIB
+static int usb49xx_check_dev_children(struct device *dev, void *child)
+{
+ if (dev->type == &i2c_adapter_type) {
+ return device_for_each_child(dev, child,
+ usb49xx_check_dev_children);
+ }
+
+ return (dev == child);
+}
+
+static int usb49xx_check_gpio_chip(struct usb49xx *hub)
+{
+ struct gpio_chip *gc = gpiod_to_chip(hub->gpio_reset);
+ struct i2c_adapter *adap = hub->i2c->adapter;
+ int ret;
+
+ if (!hub->gpio_reset)
+ return 0;
+
+ if (!gc)
+ return -EINVAL;
+
+ ret = usb49xx_check_dev_children(&adap->dev, gc->parent);
+ if (ret) {
+ dev_err(hub->dev, "Reset GPIO chip is at the same i2c-bus\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+#else
+static int usb49xx_check_gpio_chip(struct usb49xx *hub)
+{
+ return 0;
+}
+#endif
+
+static void usb49xx_reset(struct usb49xx *hub, int state)
+{
+ if (state) {
+ /* During rising edge of reset, there must be no traffic on the i2c bus */
+ i2c_lock_bus(hub->i2c->adapter, I2C_LOCK_SEGMENT);
+ gpiod_set_value_cansleep(hub->gpio_reset, 1);
+ /* Wait for i2c logic to come up (hub seems to require ~10 ms)*/
+ msleep(20);
+ i2c_unlock_bus(hub->i2c->adapter, I2C_LOCK_SEGMENT);
+ } else {
+ gpiod_set_value_cansleep(hub->gpio_reset, 0);
+ /* minimum reset pulse width is 5 us */
+ usleep_range(5, 10);
+ }
+}
+
+struct usb49xx_string_desc {
+ u8 length; /* length of string in bytes + 2 */
+ u8 type; /* always 0x03 */
+ wchar_t string[USB49XX_STRING_BUFSIZE/sizeof(wchar_t)];
+};
+
+static void usb49xx_get_ports_field(struct usb49xx *hub,
+ const char *prop_name, u8 port_cnt,
+ u8 *fld)
+{
+ struct device *dev = hub->dev;
+ struct property *prop;
+ const __be32 *p;
+ u32 port;
+
+ of_property_for_each_u32(dev->of_node, prop_name, prop, p, port) {
+ if ((port >= 1) && (port <= port_cnt))
+ *fld |= BIT(port);
+ else
+ dev_warn(dev, "port %u doesn't exist\n", port);
+ }
+}
+
+static int usb49xx_connect(struct usb49xx *hub)
+{
+ struct device *dev = hub->dev;
+ struct device_node *np = dev->of_node;
+ int err;
+ char attach_buffer[3];
+
+ usb49xx_reset(hub, 1);
+
+ if (hub->skip_config) {
+ dev_info(dev, "Skip hub configuration, only attach.\n");
+ } else {
+ u16 vendor_id, product_id, device_id, lang_id;
+ u8 hub_cfg[3];
+ u32 property_u32;
+ char const *manufacturer;
+ char const *product;
+ u8 non_rem_dev = 0;
+ u8 port_disable_sp = 0;
+ u8 port_disable_bp = 0;
+
+ if (!of_property_read_u16_array(np, "vendor-id", &vendor_id, 1)) {
+ char buffer[] = { vendor_id >> 8, vendor_id };
+
+ err = regmap_bulk_write(hub->regmap, USB49XX_ADDR_VENDOR_ID,
+ buffer, ARRAY_SIZE(buffer));
+ if (err) {
+ dev_err(dev, "Setting vendor id failed: %d\n", err);
+ return err;
+ }
+ }
+
+ if (!of_property_read_u16_array(np, "product-id", &product_id, 1)) {
+ char buffer[] = { product_id >> 8, product_id };
+
+ err = regmap_bulk_write(hub->regmap, USB49XX_ADDR_PRODUCT_ID,
+ buffer, ARRAY_SIZE(buffer));
+ if (err) {
+ dev_err(dev, "Setting product id failed: %d\n", err);
+ return err;
+ }
+ }
+
+ if (!of_property_read_u16_array(np, "device-id", &device_id, 1)) {
+ char buffer[] = { device_id >> 8, device_id };
+
+ err = regmap_bulk_write(hub->regmap, USB49XX_ADDR_DEVICE_ID,
+ buffer, ARRAY_SIZE(buffer));
+ if (err) {
+ dev_err(dev, "Setting device id failed: %d\n", err);
+ return err;
+ }
+ }
+
+ err = regmap_bulk_read(hub->regmap, USB49XX_ADDR_HUB_CFG,
+ hub_cfg, ARRAY_SIZE(hub_cfg));
+ if (err) {
+ dev_err(dev, "Reading hub cfg failed: %d\n", err);
+ return err;
+ }
+
+ if (of_get_property(np, "self-powered", NULL)) {
+ hub_cfg[0] |= BIT(7);
+
+ /* Configure Over-Current sens when self-powered */
+ hub_cfg[0] &= ~BIT(2);
+ if (of_get_property(np, "ganged-sensing", NULL))
+ hub_cfg[0] &= ~BIT(1);
+ else if (of_get_property(np, "individual-sensing", NULL))
+ hub_cfg[0] |= BIT(1);
+ } else if (of_get_property(np, "bus-powered", NULL)) {
+ hub_cfg[0] &= ~BIT(7);
+
+ /* Disable Over-Current sense when bus-powered */
+ hub_cfg[0] |= BIT(2);
+ }
+
+ if (of_get_property(np, "disable-hi-speed", NULL))
+ hub_cfg[0] |= BIT(5);
+
+ if (of_get_property(np, "multi-tt", NULL))
+ hub_cfg[0] |= BIT(4);
+ else if (of_get_property(np, "single-tt", NULL))
+ hub_cfg[0] &= ~BIT(4);
+
+ if (of_get_property(np, "disable-eop", NULL))
+ hub_cfg[0] |= BIT(3);
+
+ if (of_get_property(np, "individual-port-switching", NULL))
+ hub_cfg[0] |= BIT(0);
+ else if (of_get_property(np, "ganged-port-switching", NULL))
+ hub_cfg[0] &= ~BIT(0);
+
+ if (of_get_property(np, "dynamic-power-switching", NULL))
+ hub_cfg[1] |= BIT(7);
+
+ if (!of_property_read_u32(np, "oc-delay-ns", &property_u32)) {
+ if (property_u32 == 50) {
+ /* 50 ns*/
+ hub_cfg[1] &= ~BIT(5);
+ hub_cfg[1] &= ~BIT(4);
+ } else if (property_u32 == 100) {
+ /* 100 ns */
+ hub_cfg[1] &= ~BIT(5);
+ hub_cfg[1] |= BIT(4);
+ } else if (property_u32 == 200) {
+ /* 400 ns */
+ hub_cfg[1] |= BIT(5);
+ hub_cfg[1] |= BIT(4);
+ } else {
+ /* 200 ns (DEFAULT) */
+ hub_cfg[1] |= BIT(5);
+ hub_cfg[1] &= ~BIT(4);
+ }
+ }
+
+ if (of_get_property(np, "compound-device", NULL))
+ hub_cfg[1] |= BIT(3);
+
+ if (of_get_property(np, "port-mapping-mode", NULL))
+ hub_cfg[2] |= USB49XX_HUB_CFG3_PRTMAP_EN;
+
+ /* port mapping requires that Link Power Management is disabled */
+ if (hub_cfg[2] & USB49XX_HUB_CFG3_PRTMAP_EN) {
+ unsigned int usb2_hub_ctrl;
+
+ /* Disable Link Power Management */
+ err = regmap_read(hub->regmap, USB49XX_ADDR_USB2_HUB_CTRL,
+ &usb2_hub_ctrl);
+ if (err) {
+ dev_err(dev, "Reading USB2 Hub Control failed: %d\n", err);
+ return err;
+ }
+
+ usb2_hub_ctrl |= USB49XX_USB2_HUB_CTRL_LPM_DISABLE;
+
+ err = regmap_write(hub->regmap, USB49XX_ADDR_USB2_HUB_CTRL,
+ usb2_hub_ctrl);
+ if (err) {
+ dev_err(dev, "Writing USB2 Hub Control failed: %d\n", err);
+ return err;
+ }
+ }
+
+ manufacturer = of_get_property(np, "manufacturer", NULL);
+ product = of_get_property(np, "product", NULL);
+
+ if (manufacturer || product)
+ hub_cfg[2] |= USB49XX_HUB_CFG3_STRING_EN;
+
+ err = regmap_bulk_write(hub->regmap, USB49XX_ADDR_HUB_CFG,
+ hub_cfg, ARRAY_SIZE(hub_cfg));
+ if (err) {
+ dev_err(dev, "Setting hub cfg failed: %d\n", err);
+ return err;
+ }
+
+ usb49xx_get_ports_field(hub, "non-removable-ports", 5, &non_rem_dev);
+ err = regmap_write(hub->regmap, USB49XX_ADDR_NON_REMOVABLE_DEVICES,
+ non_rem_dev);
+ if (err) {
+ dev_err(dev, "Setting non removable devices failed: %d\n", err);
+ return err;
+ }
+
+ usb49xx_get_ports_field(hub, "sp-disabled-ports", 7, &port_disable_sp);
+ err = regmap_write(hub->regmap, USB49XX_ADDR_PORT_DISABLE_SELF,
+ port_disable_sp);
+ if (err) {
+ dev_err(dev, "Setting port disable self powered failed: %d\n", err);
+ return err;
+ }
+
+ usb49xx_get_ports_field(hub, "bp-disabled-ports", 7, &port_disable_bp);
+ err = regmap_write(hub->regmap, USB49XX_ADDR_PORT_DISABLE_BUS,
+ port_disable_bp);
+ if (err) {
+ dev_err(dev, "Setting port disable powered powered failed: %d\n", err);
+ return err;
+ }
+
+ if (!of_property_read_u32(np, "power-on-time-ms", &property_u32)) {
+ u8 power_on_time = min_t(u8, property_u32 / 2, 255);
+
+ err = regmap_write(hub->regmap, USB49XX_ADDR_POWER_ON_TIME,
+ power_on_time);
+ if (err) {
+ dev_err(dev, "Setting power on time failed: %d\n", err);
+ return err;
+ }
+ }
+
+ if (!of_property_read_u32(np, "ocs-min-width-ms", &property_u32)) {
+ u8 ocs_min_width = min_t(u8, property_u32, 5);
+
+ err = regmap_write(hub->regmap, USB49XX_ADDR_OCS_MIN_WIDTH,
+ ocs_min_width);
+ if (err) {
+ dev_err(dev, "Setting ocs min width failed: %d\n", err);
+ return err;
+ }
+ }
+
+ if (!of_property_read_u16_array(np, "language-id", &lang_id, 1)) {
+ char buffer[] = { lang_id >> 8, lang_id };
+
+ err = regmap_bulk_write(hub->regmap, USB49XX_ADDR_LANGUAGE_ID,
+ buffer, ARRAY_SIZE(buffer));
+ if (err) {
+ dev_err(dev, "Setting language id failed: %d\n", err);
+ return err;
+ }
+ }
+
+ if (manufacturer) {
+ struct usb49xx_string_desc manufacturer_desc;
+
+ memset(&manufacturer_desc, 0, sizeof(manufacturer_desc));
+ manufacturer_desc.type = 0x3;
+ manufacturer_desc.length =
+ utf8s_to_utf16s(manufacturer, strlen(manufacturer),
+ UTF16_LITTLE_ENDIAN,
+ manufacturer_desc.string, USB49XX_STRING_BUFSIZE)
+ * sizeof(wchar_t) + 2;
+
+ err = regmap_bulk_write(hub->regmap,
+ USB49XX_ADDR_MANUFACTURER_STRING_DESC,
+ &manufacturer_desc, sizeof(manufacturer_desc));
+ if (err) {
+ dev_err(dev, "Setting manufacturer string descriptor failed: %d\n",
+ err);
+ return err;
+ }
+
+ err = regmap_write(hub->regmap, USB49XX_ADDR_MANUFACTURER_STRING_LEN,
+ manufacturer_desc.length);
+ if (err) {
+ dev_err(dev, "Setting manufacturer string length failed: %d\n",
+ err);
+ return err;
+ }
+ }
+
+ if (product) {
+ struct usb49xx_string_desc product_desc;
+
+ memset(&product_desc, 0, sizeof(product_desc));
+ product_desc.type = 0x3;
+ product_desc.length = utf8s_to_utf16s(product, strlen(product),
+ UTF16_LITTLE_ENDIAN,
+ product_desc.string, USB49XX_STRING_BUFSIZE)
+ * sizeof(wchar_t) + 2;
+
+ err = regmap_bulk_write(hub->regmap,
+ USB49XX_ADDR_PRODUCT_STRING_DESC,
+ &product_desc, sizeof(product_desc));
+ if (err) {
+ dev_err(dev, "Setting product string descriptor failed: %d\n", err);
+ return err;
+ }
+
+ err = regmap_write(hub->regmap, USB49XX_ADDR_PRODUCT_STRING_LEN,
+ product_desc.length);
+ if (err) {
+ dev_err(dev, "SSetting product string length failed: %d\n", err);
+ return err;
+ }
+ }
+ }
+
+#ifdef DEBUG
+ {
+ char *buffer = kzalloc(0x5000, GFP_KERNEL);
+
+ err = regmap_bulk_read(hub->regmap, 0xBF800000, buffer, 0x4);
+ print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, buffer, 0x4);
+ err = regmap_bulk_read(hub->regmap, 0xBF803000, buffer, 0x200);
+ print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, buffer, 0x200);
+ err = regmap_bulk_read(hub->regmap, 0xBFD23200, buffer, 0x200);
+ print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, buffer, 0x200);
+ kfree(buffer);
+ }
+#endif
+
+ /*
+ * attach
+ */
+ /* n.b. Could also use 0xAA56 (attach with SMBus runtime access) */
+ attach_buffer[0] = 0xAA; /* USB attach (high byte) */
+ attach_buffer[1] = 0x56; /* USB attach (low byte) */
+ attach_buffer[2] = 0x00; /* terminator */
+
+ err = i2c_master_send(hub->i2c, attach_buffer, 3);
+ if (err != 3) {
+ dev_err(dev, "attaching hub failed: %d\n", err);
+ return err;
+ }
+
+ dev_info(dev, "Hub configuration was successful.\n");
+ return 0;
+
+}
+
+#ifdef CONFIG_OF
+static int usb49xx_get_ofdata(struct usb49xx *hub)
+{
+ struct device *dev = hub->dev;
+ struct device_node *np = dev->of_node;
+
+ if (!np) {
+ dev_err(dev, "failed to get ofdata\n");
+ return -ENODEV;
+ }
+
+ if (of_get_property(np, "skip-config", NULL))
+ hub->skip_config = 1;
+ else
+ hub->skip_config = 0;
+
+ hub->gpio_reset = devm_gpiod_get_optional(dev, "reset", GPIOD_OUT_LOW);
+ if (IS_ERR(hub->gpio_reset))
+ return PTR_ERR(hub->gpio_reset);
+
+ return 0;
+}
+
+static const struct of_device_id usb49xx_of_match[] = {
+ { .compatible = "microchip,usb4712", },
+ { .compatible = "microchip,usb4712i", },
+ { .compatible = "microchip,usb4715", },
+ { .compatible = "microchip,usb4715i", },
+ { .compatible = "microchip,usb4912", },
+ { .compatible = "microchip,usb4912i", },
+ { .compatible = "microchip,usb4914", },
+ { .compatible = "microchip,usb4914i", },
+ { .compatible = "microchip,usb4916", },
+ { .compatible = "microchip,usb4916i", },
+ { .compatible = "microchip,usb4925", },
+ { .compatible = "microchip,usb4925i", },
+ { .compatible = "microchip,usb4927", },
+ { .compatible = "microchip,usb4927i", },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, usb49xx_of_match);
+#else /* CONFIG_OF */
+static int usb49xx_get_ofdata(struct usb49xx *hub)
+{
+ return 0;
+}
+#endif /* CONFIG_OF */
+
+static void usb49xx_regulator_disable_action(void *data)
+{
+ struct usb49xx *hub = data;
+
+ regulator_disable(hub->vdd);
+}
+
+static int usb49xx_probe(struct usb49xx *hub)
+{
+ struct device *dev = hub->dev;
+ struct device_node *np = dev->of_node;
+ int err;
+
+ if (np) {
+ err = usb49xx_get_ofdata(hub);
+ if (err) {
+ dev_err(dev, "failed to get ofdata: %d\n", err);
+ return err;
+ }
+ }
+
+ /*
+ * The usb49xx performs a check on the SMBus during the SMBUS_CHECK state.
+ * In order to successful, SCL and SDA must be stable at this moment.
+ * Normally we could just lock the SMBus-segment the
+ * hub i2c-interface resides for the device-specific reset timing. But
+ * the GPIO controller, which is used to handle the hub reset, might be
+ * placed at the same i2c-bus segment. In this case an error should be
+ * returned since we can't safely use the GPIO controller to clear the
+ * reset state (it may affect the hub configuration) and we can't lock
+ * the i2c-bus segment (it will cause a deadlock).
+ */
+ err = usb49xx_check_gpio_chip(hub);
+ if (err)
+ return err;
+
+ hub->vdd = devm_regulator_get(dev, "vdd");
+ if (IS_ERR(hub->vdd))
+ return PTR_ERR(hub->vdd);
+
+ err = regulator_enable(hub->vdd);
+ if (err)
+ return err;
+
+ err = devm_add_action_or_reset(dev,
+ usb49xx_regulator_disable_action, hub);
+ if (err)
+ return err;
+
+ err = usb49xx_connect(hub);
+ if (err) {
+ dev_err(dev, "Failed to connect hub (%d)\n", err);
+ return err;
+ }
+
+ dev_info(dev, "Hub probed successfully\n");
+
+ return 0;
+}
+
+static int usb49xx_i2c_gather_write(void *context,
+ const void *reg, size_t reg_len,
+ const void *val, size_t val_len)
+{
+ struct i2c_client *i2c = (struct i2c_client *)context;
+ size_t frame_len = val_len + 9;
+ char *buffer;
+ int err;
+
+ if (WARN_ON(reg_len != 4))
+ return -EINVAL;
+
+ buffer = kmalloc(frame_len, GFP_KERNEL);
+ if (!buffer)
+ return -ENOMEM;
+
+ buffer[0] = 0x00; /* Memory address (high byte) */
+ buffer[1] = 0x00; /* Memory address (low byte) */
+ buffer[2] = val_len + 6; /* Number of bytes to write to memory */
+ buffer[3] = 0x00; /* Register Write */
+ buffer[4] = val_len; /* Write val_len data bytes */
+ buffer[5] = *((const char *)reg + 0); /* Register address (MSB) */
+ buffer[6] = *((const char *)reg + 1); /* Register address */
+ buffer[7] = *((const char *)reg + 2); /* Register address */
+ buffer[8] = *((const char *)reg + 3); /* Register address (LSB) */
+ memcpy(&buffer[9], val, val_len);
+
+ err = i2c_master_send(i2c, buffer, frame_len);
+ if (err != (int)frame_len) {
+ dev_err(&i2c->dev, "Writing to hub memory failed: %d\n", err);
+ goto error_kfree;
+ }
+
+ buffer[0] = 0x99; /* Command (high byte) */
+ buffer[1] = 0x37; /* Command (low byte) */
+ buffer[2] = 0x00; /* Termination */
+ frame_len = 3;
+
+ err = i2c_master_send(i2c, buffer, frame_len);
+ if (err != (int)frame_len) {
+ dev_err(&i2c->dev, "Accessing configuration data failed: %d\n", err);
+ goto error_kfree;
+ }
+
+ err = 0;
+
+error_kfree:
+ kfree(buffer);
+ return err;
+}
+
+/* regmap puts address into data[0] .. data[3]; value is in data[4] */
+static int usb49xx_i2c_write(void *context, const void *data, size_t count)
+{
+ if (WARN_ON(count != 5))
+ return -EINVAL;
+
+ return usb49xx_i2c_gather_write(context, data, 4, data + 4, 1);
+}
+
+static int usb49xx_i2c_read(void *context, const void *reg_buf, size_t reg_size,
+ void *val_buf, size_t val_size)
+{
+ struct i2c_client *i2c = (struct i2c_client *)context;
+ char *tx, *rx;
+ int err;
+
+ if (WARN_ON(reg_size != 4)) {
+ err = -EINVAL;
+ goto error_return;
+ }
+
+ tx = kmalloc(9, GFP_KERNEL);
+ if (!tx) {
+ err = -ENOMEM;
+ goto error_return;
+ }
+
+ rx = kmalloc(1 + val_size, GFP_KERNEL);
+ if (!rx) {
+ err = -ENOMEM;
+ goto error_free_tx;
+ }
+
+ tx[0] = 0x00; /* Memory address (high byte) */
+ tx[1] = 0x00; /* Memory address (low byte) */
+ tx[2] = 6; /* Number of bytes to write to memory */
+ tx[3] = 0x01; /* Register Read */
+ tx[4] = val_size; /* Read val_size data bytes */
+ tx[5] = *((const char *)reg_buf + 0); /* Register address (MSB) */
+ tx[6] = *((const char *)reg_buf + 1); /* Register address */
+ tx[7] = *((const char *)reg_buf + 2); /* Register address */
+ tx[8] = *((const char *)reg_buf + 3); /* Register address (LSB) */
+
+ err = i2c_master_send(i2c, tx, 9);
+ if (err != 9) {
+ dev_err(&i2c->dev, "Writing to hub memory failed: %d\n", err);
+ goto error_free_rx;
+ }
+
+ tx[0] = 0x99; /* Command (high byte) */
+ tx[1] = 0x37; /* Command (low byte) */
+ tx[2] = 0x00; /* Termination */
+
+ err = i2c_master_send(i2c, tx, 3);
+ if (err != 3) {
+ dev_err(&i2c->dev, "Accessing configuration data failed: %d\n", err);
+ goto error_free_rx;
+ }
+
+ /* Read from hub memory address 6 (according to application note) */
+ tx[0] = 0x00; /* Memory address (high byte) */
+ tx[1] = 0x06; /* Memory address (low byte) */
+
+ {
+ struct i2c_msg msgs[] = {
+ {
+ .addr = i2c->addr, .flags = 0,
+ .len = 2, .buf = tx
+ },
+ {
+ .addr = i2c->addr, .flags = I2C_M_RD,
+ .len = 1 + val_size, .buf = rx
+ },
+ };
+
+ err = i2c_transfer(i2c->adapter, msgs, ARRAY_SIZE(msgs));
+ if (err < 0) {
+ dev_err(&i2c->dev, "Reading from hub memory failed: %d\n", err);
+ goto error_free_rx;
+ }
+ }
+
+ WARN_ON(rx[0] < val_size);
+
+ memcpy(val_buf, &rx[1], val_size);
+
+ err = 0;
+
+error_free_rx:
+ kfree(rx);
+error_free_tx:
+ kfree(tx);
+error_return:
+ return err;
+}
+
+/*
+ * The reason we need this custom regmap_bus instead of using regmap_init_i2c()
+ * is that accesses to the USB49xx configuration memory have to be wrapped into
+ * a special protocol.
+ */
+static const struct regmap_bus usb49xx_i2c_regmap = {
+ .write = usb49xx_i2c_write,
+ .gather_write = usb49xx_i2c_gather_write,
+ .read = usb49xx_i2c_read,
+ .max_raw_read = 8,
+ .max_raw_write = 128,
+};
+
+/* Avoid reading bigger dead ranges inside hubs memory. Same table for
+ * read and write.
+ */
+static const struct regmap_range usb49xx_regmap_yes_ranges[] = {
+ { .range_min = 0xBF800000, .range_max = 0xBF800003 },
+ { .range_min = 0xBF800900, .range_max = 0xBF8009FF },
+ { .range_min = 0xBF803000, .range_max = 0xBF803015 },
+ { .range_min = 0xBF8030D0, .range_max = 0xBF803197 },
+ { .range_min = 0xBF80398C, .range_max = 0xBF80398D },
+ { .range_min = 0xBF803C00, .range_max = 0xBF803C3C },
+ { .range_min = 0xBF8060CA, .range_max = 0xBF8060CC },
+ { .range_min = 0xBF8064CA, .range_max = 0xBF8064CC },
+ { .range_min = 0xBF8068CA, .range_max = 0xBF8068CC },
+ { .range_min = 0xBF806CCA, .range_max = 0xBF806CCC },
+ { .range_min = 0xBF8070CA, .range_max = 0xBF8070CC },
+ { .range_min = 0xBF8074CA, .range_max = 0xBF8074CC },
+ { .range_min = 0xBF8078CA, .range_max = 0xBF8078CC },
+
+ { .range_min = 0xBFD22856, .range_max = 0xBFD22857 },
+ { .range_min = 0xBFD23202, .range_max = 0xBFD23472 },
+};
+
+static const struct regmap_access_table usb49xx_regmap_access_table = {
+ .yes_ranges = usb49xx_regmap_yes_ranges,
+ .n_yes_ranges = ARRAY_SIZE(usb49xx_regmap_yes_ranges),
+};
+
+static int usb49xx_i2c_probe(struct i2c_client *i2c,
+ const struct i2c_device_id *id __always_unused)
+{
+ struct usb49xx *hub;
+ struct regmap_config regmap_cfg = {
+ .name = "usb49xx_config_mem",
+ .reg_bits = 32,
+ .val_bits = 8,
+ .wr_table = &usb49xx_regmap_access_table,
+ .rd_table = &usb49xx_regmap_access_table,
+ .can_multi_write = 1,
+ };
+
+ hub = devm_kzalloc(&i2c->dev, sizeof(struct usb49xx), GFP_KERNEL);
+ if (!hub)
+ return -ENOMEM;
+
+ i2c_set_clientdata(i2c, hub);
+ hub->dev = &i2c->dev;
+ hub->i2c = i2c;
+ hub->regmap = devm_regmap_init(&i2c->dev, &usb49xx_i2c_regmap, i2c,
+ ®map_cfg);
+ if (IS_ERR(hub->regmap))
+ return PTR_ERR(hub->regmap);
+
+ return usb49xx_probe(hub);
+}
+
+static int usb49xx_i2c_remove(struct i2c_client *i2c)
+{
+ struct usb49xx *hub = i2c_get_clientdata(i2c);
+
+ usb49xx_reset(hub, 0);
+
+ return 0;
+};
+
+static int __maybe_unused usb49xx_suspend(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct usb49xx *hub = i2c_get_clientdata(client);
+
+ return regulator_disable(hub->vdd);
+}
+
+static int __maybe_unused usb49xx_resume(struct device *dev)
+{
+ struct i2c_client *client = to_i2c_client(dev);
+ struct usb49xx *hub = i2c_get_clientdata(client);
+ int err;
+
+ err = regulator_enable(hub->vdd);
+ if (err)
+ return err;
+
+ return usb49xx_connect(hub);
+}
+
+static SIMPLE_DEV_PM_OPS(usb49xx_pm_ops, usb49xx_suspend, usb49xx_resume);
+
+static const struct i2c_device_id usb49xx_id[] = {
+ { "usb4712", 0 },
+ { "usb4712i", 0 },
+ { "usb4715", 0 },
+ { "usb4715i", 0 },
+ { "usb4912", 0 },
+ { "usb4912i", 0 },
+ { "usb4914", 0 },
+ { "usb4914i", 0 },
+ { "usb4916", 0 },
+ { "usb4916 i", 0 },
+ { "usb4925", 0 },
+ { "usb4925i", 0 },
+ { "usb4927", 0 },
+ { "usb4927i", 0 },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(i2c, usb49xx_id);
+
+static struct i2c_driver usb49xx_i2c_driver = {
+ .driver = {
+ .name = DRIVER_NAME,
+ .of_match_table = of_match_ptr(usb49xx_of_match),
+ .pm = &usb49xx_pm_ops,
+ },
+ .probe = usb49xx_i2c_probe,
+ .remove = usb49xx_i2c_remove,
+ .id_table = usb49xx_id,
+};
+
+module_i2c_driver(usb49xx_i2c_driver);
+
+MODULE_AUTHOR("Christian Eggers <[email protected]>");
+MODULE_DESCRIPTION("USB47xx/USB49xx USB 2.0 Hub Controller Driver");
+MODULE_LICENSE("GPL");
--
Christian Eggers
Embedded software developer
Arnold & Richter Cine Technik GmbH & Co. Betriebs KG
Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRA 57918
Persoenlich haftender Gesellschafter: Arnold & Richter Cine Technik GmbH
Sitz: Muenchen - Registergericht: Amtsgericht Muenchen - Handelsregisternummer: HRB 54477
Geschaeftsfuehrer: Dr. Michael Neuhaeuser; Stephan Schenk; Walter Trauninger; Markus Zeiler