This series brings support for:
* sdhci2 on 8992/4
* BLSP_I2C1 (a seemingly WP-exclusive i2c bus) for 8992
* Synaptics RMI4 touchscreen for Sony Kitakami and MSFT L950
* DWC3 USB for msm8992/4 (doesn't work on Lumias, they use custom
circuitry)
* Missing clocks for 8994 GCC needed for USB
Konrad Dybcio (9):
arm64: dts: qcom: msm8992: Add support for SDHCI2
arm64: dts: qcom: msm8992: Add BLSP_I2C1 support
arm64: dts: qcom: talkman: Add Synaptics RMI4 touchscreen
arm64: dts: qcom: msm8994: Add USB support
arm64: dts: qcom: msm8992: Add USB support
clk: qcom: gcc-msm8994: Add missing clocks, resets and GDSCs
arm64: dts: qcom: kitakami: Add Synaptics touchscreen
arm64: dts: qcom: msm8994: Add SDHCI2 node
arm64: dts: qcom: kitakami: Enable SDHCI2
.../dts/qcom/msm8992-msft-lumia-talkman.dts | 28 ++
arch/arm64/boot/dts/qcom/msm8992.dtsi | 124 ++++++
.../qcom/msm8994-sony-xperia-kitakami.dtsi | 49 ++-
arch/arm64/boot/dts/qcom/msm8994.dtsi | 89 ++++
drivers/clk/qcom/gcc-msm8994.c | 388 +++++++++++++++++-
include/dt-bindings/clock/qcom,gcc-msm8994.h | 36 ++
6 files changed, 712 insertions(+), 2 deletions(-)
--
2.27.0
This will let us use SD cards on our devices.
Signed-off-by: Konrad Dybcio <[email protected]>
---
arch/arm64/boot/dts/qcom/msm8992.dtsi | 58 +++++++++++++++++++++++++++
1 file changed, 58 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi
index 188fff2095f1..9b42ac42b171 100644
--- a/arch/arm64/boot/dts/qcom/msm8992.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi
@@ -269,6 +269,28 @@ sdhc_1: sdhci@f9824900 {
status = "disabled";
};
+ sdhc_2: sdhci@f98a4900 {
+ compatible = "qcom,sdhci-msm-v4";
+ reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
+ reg-names = "hc_mem", "core_mem";
+
+ interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
+
+ clocks = <&gcc GCC_SDCC2_APPS_CLK>,
+ <&gcc GCC_SDCC2_AHB_CLK>,
+ <&xo_board>;
+ clock-names = "core", "iface", "xo";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>;
+ pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
+
+ bus-width = <4>;
+ status = "disabled";
+ };
+
blsp1_uart2: serial@f991e000 {
compatible = "qcom,msm-uartdm-v1.4", "qcom,msm-uartdm";
reg = <0xf991e000 0x1000>;
@@ -573,6 +595,42 @@ i2c13_sleep: i2c13-sleep {
drive-strength = <2>;
bias-disable;
};
+
+ sdc2_clk_on: sdc2-clk-on {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <16>;
+ };
+
+ sdc2_clk_off: sdc2-clk-off {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ sdc2_cmd_on: sdc2-cmd-on {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ sdc2_cmd_off: sdc2-cmd-off {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ sdc2_data_on: sdc2-data-on {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ sdc2_data_off: sdc2-data-off {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
};
};
--
2.27.0
This adds touchscreen capabilities to the Lumia 950.
Signed-off-by: Konrad Dybcio <[email protected]>
---
.../dts/qcom/msm8992-msft-lumia-talkman.dts | 28 +++++++++++++++++++
1 file changed, 28 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-talkman.dts b/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-talkman.dts
index 3cc01f02219d..c337a86a5c77 100644
--- a/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-talkman.dts
+++ b/arch/arm64/boot/dts/qcom/msm8992-msft-lumia-talkman.dts
@@ -32,6 +32,34 @@ chosen {
};
};
+&blsp_i2c1 {
+ status = "okay";
+
+ rmi4-i2c-dev@4b {
+ compatible = "syna,rmi4-i2c";
+ reg = <0x4b>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <77 IRQ_TYPE_EDGE_FALLING>;
+
+ rmi4-f01@1 {
+ reg = <0x01>;
+ syna,nosleep-mode = <1>;
+ };
+
+ rmi4-f12@12 {
+ reg = <0x12>;
+ syna,sensor-type = <1>;
+ syna,clip-x-low = <0>;
+ syna,clip-x-high = <1440>;
+ syna,clip-y-low = <0>;
+ syna,clip-y-high = <2560>;
+ };
+ };
+};
+
&sdhc_1 {
status = "okay";
--
2.27.0
This is a very basic dwc3 configuration (no PHYs yet),
but it works.
Signed-off-by: Konrad Dybcio <[email protected]>
---
arch/arm64/boot/dts/qcom/msm8994.dtsi | 31 +++++++++++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi
index 6707f898607f..69c99a4cd817 100644
--- a/arch/arm64/boot/dts/qcom/msm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi
@@ -282,6 +282,37 @@ frame@f9028000 {
};
};
+ usb3: usb@f92f8800 {
+ compatible = "qcom,msm8996-dwc3", "qcom,dwc3";
+ reg = <0xf92f8800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clocks = <&gcc GCC_USB30_MASTER_CLK>,
+ <&gcc GCC_SYS_NOC_USB3_AXI_CLK>,
+ <&gcc GCC_USB30_SLEEP_CLK>,
+ <&gcc GCC_USB30_MOCK_UTMI_CLK>;
+ clock-names = "core", "iface", "sleep", "mock_utmi", "ref", "xo";
+
+ assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <120000000>;
+
+ power-domains = <&gcc USB30_GDSC>;
+ qcom,select-utmi-as-pipe-clk;
+
+ dwc3@f9200000 {
+ compatible = "snps,dwc3";
+ reg = <0xf9200000 0xcc00>;
+ interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ maximum-speed = "high-speed";
+ dr_mode = "peripheral";
+ };
+ };
+
sdhc1: sdhci@f9824900 {
compatible = "qcom,sdhci-msm-v4";
reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>;
--
2.27.0
This enables the use of uSD cards.
Signed-off-by: Konrad Dybcio <[email protected]>
---
arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
index 696cd39852f4..806e8ee00833 100644
--- a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
@@ -261,6 +261,10 @@ &sdhc1 {
*/
};
+&sdhc2 {
+ status = "okay";
+};
+
&tlmm {
ts_int_active: ts-int-active {
pins = "gpio42";
--
2.27.0
All Kitakami devices seem to use the Synaptics RMI4
touchscreen attached to the same i2c bus. Configure and
enable it.
Signed-off-by: Konrad Dybcio <[email protected]>
---
.../qcom/msm8994-sony-xperia-kitakami.dtsi | 45 ++++++++++++++++++-
1 file changed, 44 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
index 4032b7478f04..696cd39852f4 100644
--- a/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994-sony-xperia-kitakami.dtsi
@@ -138,7 +138,34 @@ &blsp_i2c5 {
&blsp_i2c6 {
status = "okay";
- /* Synaptics touchscreen */
+ rmi4-i2c-dev@2c {
+ compatible = "syna,rmi4-i2c";
+ reg = <0x2c>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ interrupt-parent = <&tlmm>;
+ interrupts = <42 IRQ_TYPE_EDGE_FALLING>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&ts_int_active &ts_reset_active>;
+
+ vdd-supply = <&pm8994_l22>;
+ vio-supply = <&pm8994_s4>;
+
+ syna,reset-delay-ms = <220>;
+ syna,startup-delay-ms = <220>;
+
+ rmi4-f01@1 {
+ reg = <0x01>;
+ syna,nosleep-mode = <1>;
+ };
+
+ rmi4-f11@11 {
+ reg = <0x11>;
+ syna,sensor-type = <1>;
+ };
+ };
};
&blsp1_uart2 {
@@ -233,3 +260,19 @@ &sdhc1 {
* vqmmc-supply = <&pm8994_s4>;
*/
};
+
+&tlmm {
+ ts_int_active: ts-int-active {
+ pins = "gpio42";
+ drive-strength = <2>;
+ bias-disable;
+ input-enable;
+ };
+
+ ts_reset_active: ts-reset-active {
+ pins = "gpio109";
+ drive-strength = <2>;
+ bias-disable;
+ output-low;
+ };
+};
--
2.27.0
This is a very basic dwc3 configuration (no PHYs yet),
but it works.
Signed-off-by: Konrad Dybcio <[email protected]>
---
arch/arm64/boot/dts/qcom/msm8992.dtsi | 31 +++++++++++++++++++++++++++
1 file changed, 31 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi
index c7dc81311f6a..c9502fcf5d70 100644
--- a/arch/arm64/boot/dts/qcom/msm8992.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi
@@ -242,6 +242,37 @@ frame@f9028000 {
};
};
+ usb3: usb@f92f8800 {
+ compatible = "qcom,msm8996-dwc3", "qcom,dwc3";
+ reg = <0xf92f8800 0x400>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+
+ clocks = <&gcc GCC_USB30_MASTER_CLK>,
+ <&gcc GCC_SYS_NOC_USB3_AXI_CLK>,
+ <&gcc GCC_USB30_SLEEP_CLK>,
+ <&gcc GCC_USB30_MOCK_UTMI_CLK>;
+ clock-names = "core", "iface", "sleep", "mock_utmi", "ref", "xo";
+
+ assigned-clocks = <&gcc GCC_USB30_MOCK_UTMI_CLK>,
+ <&gcc GCC_USB30_MASTER_CLK>;
+ assigned-clock-rates = <19200000>, <120000000>;
+
+ power-domains = <&gcc USB30_GDSC>;
+ qcom,select-utmi-as-pipe-clk;
+
+ dwc3@f9200000 {
+ compatible = "snps,dwc3";
+ reg = <0xf9200000 0xcc00>;
+ interrupts = <0 131 IRQ_TYPE_LEVEL_HIGH>;
+ snps,dis_u2_susphy_quirk;
+ snps,dis_enblslpm_quirk;
+ maximum-speed = "high-speed";
+ dr_mode = "peripheral";
+ };
+ };
+
sdhc_1: sdhci@f9824900 {
compatible = "qcom,sdhci-msm-v4";
reg = <0xf9824900 0x1a0>, <0xf9824000 0x800>;
--
2.27.0
This change adds GDSCs, resets and most of the missing
clocks to the msm8994 GCC driver. The remaining ones
are of local_vote_clk and gate_clk type, which are not
yet supported upstream. Also reorder them to match the
original downstream driver.
Signed-off-by: Konrad Dybcio <[email protected]>
---
I plan on converting this to use parent_data later on,
but I think we could merge it as-is for now..?
drivers/clk/qcom/gcc-msm8994.c | 388 ++++++++++++++++++-
include/dt-bindings/clock/qcom,gcc-msm8994.h | 36 ++
2 files changed, 423 insertions(+), 1 deletion(-)
diff --git a/drivers/clk/qcom/gcc-msm8994.c b/drivers/clk/qcom/gcc-msm8994.c
index b7fc8c7ba195..144d2ba7a9be 100644
--- a/drivers/clk/qcom/gcc-msm8994.c
+++ b/drivers/clk/qcom/gcc-msm8994.c
@@ -20,6 +20,7 @@
#include "clk-rcg.h"
#include "clk-branch.h"
#include "reset.h"
+#include "gdsc.h"
enum {
P_XO,
@@ -1772,6 +1773,32 @@ static struct clk_branch gcc_gp3_clk = {
},
};
+static struct clk_branch gcc_lpass_q6_axi_clk = {
+ .halt_reg = 0x0280,
+ .clkr = {
+ .enable_reg = 0x0280,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_lpass_q6_axi_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_mss_q6_bimc_axi_clk = {
+ .halt_reg = 0x0284,
+ .clkr = {
+ .enable_reg = 0x0284,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_mss_q6_bimc_axi_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
static struct clk_branch gcc_pcie_0_aux_clk = {
.halt_reg = 0x1ad4,
.clkr = {
@@ -1790,6 +1817,32 @@ static struct clk_branch gcc_pcie_0_aux_clk = {
},
};
+static struct clk_branch gcc_pcie_0_cfg_ahb_clk = {
+ .halt_reg = 0x1ad0,
+ .clkr = {
+ .enable_reg = 0x1ad0,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_pcie_0_cfg_ahb_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_pcie_0_mstr_axi_clk = {
+ .halt_reg = 0x1acc,
+ .clkr = {
+ .enable_reg = 0x1acc,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_pcie_0_mstr_axi_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
static struct clk_branch gcc_pcie_0_pipe_clk = {
.halt_reg = 0x1ad8,
.halt_check = BRANCH_HALT_DELAY,
@@ -1809,6 +1862,20 @@ static struct clk_branch gcc_pcie_0_pipe_clk = {
},
};
+static struct clk_branch gcc_pcie_0_slv_axi_clk = {
+ .halt_reg = 0x1ac8,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x1ac8,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_pcie_0_slv_axi_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
static struct clk_branch gcc_pcie_1_aux_clk = {
.halt_reg = 0x1b54,
.clkr = {
@@ -1827,6 +1894,32 @@ static struct clk_branch gcc_pcie_1_aux_clk = {
},
};
+static struct clk_branch gcc_pcie_1_cfg_ahb_clk = {
+ .halt_reg = 0x1b54,
+ .clkr = {
+ .enable_reg = 0x1b54,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_pcie_1_cfg_ahb_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_pcie_1_mstr_axi_clk = {
+ .halt_reg = 0x1b50,
+ .clkr = {
+ .enable_reg = 0x1b50,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_pcie_1_mstr_axi_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
static struct clk_branch gcc_pcie_1_pipe_clk = {
.halt_reg = 0x1b58,
.halt_check = BRANCH_HALT_DELAY,
@@ -1846,6 +1939,19 @@ static struct clk_branch gcc_pcie_1_pipe_clk = {
},
};
+static struct clk_branch gcc_pcie_1_slv_axi_clk = {
+ .halt_reg = 0x1b48,
+ .clkr = {
+ .enable_reg = 0x1b48,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_pcie_1_slv_axi_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
static struct clk_branch gcc_pdm2_clk = {
.halt_reg = 0x0ccc,
.clkr = {
@@ -1864,6 +1970,19 @@ static struct clk_branch gcc_pdm2_clk = {
},
};
+static struct clk_branch gcc_pdm_ahb_clk = {
+ .halt_reg = 0x0cc4,
+ .clkr = {
+ .enable_reg = 0x0cc4,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_pdm_ahb_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
static struct clk_branch gcc_sdcc1_apps_clk = {
.halt_reg = 0x04c4,
.clkr = {
@@ -1899,6 +2018,23 @@ static struct clk_branch gcc_sdcc1_ahb_clk = {
},
};
+static struct clk_branch gcc_sdcc2_ahb_clk = {
+ .halt_reg = 0x0508,
+ .clkr = {
+ .enable_reg = 0x0508,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_sdcc2_ahb_clk",
+ .parent_names = (const char *[]){
+ "periph_noc_clk_src",
+ },
+ .num_parents = 1,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
static struct clk_branch gcc_sdcc2_apps_clk = {
.halt_reg = 0x0504,
.clkr = {
@@ -1917,6 +2053,23 @@ static struct clk_branch gcc_sdcc2_apps_clk = {
},
};
+static struct clk_branch gcc_sdcc3_ahb_clk = {
+ .halt_reg = 0x0548,
+ .clkr = {
+ .enable_reg = 0x0548,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_sdcc3_ahb_clk",
+ .parent_names = (const char *[]){
+ "periph_noc_clk_src",
+ },
+ .num_parents = 1,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
static struct clk_branch gcc_sdcc3_apps_clk = {
.halt_reg = 0x0544,
.clkr = {
@@ -1935,6 +2088,23 @@ static struct clk_branch gcc_sdcc3_apps_clk = {
},
};
+static struct clk_branch gcc_sdcc4_ahb_clk = {
+ .halt_reg = 0x0588,
+ .clkr = {
+ .enable_reg = 0x0588,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_sdcc4_ahb_clk",
+ .parent_names = (const char *[]){
+ "periph_noc_clk_src",
+ },
+ .num_parents = 1,
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
static struct clk_branch gcc_sdcc4_apps_clk = {
.halt_reg = 0x0584,
.clkr = {
@@ -1989,6 +2159,19 @@ static struct clk_branch gcc_sys_noc_usb3_axi_clk = {
},
};
+static struct clk_branch gcc_tsif_ahb_clk = {
+ .halt_reg = 0x0d84,
+ .clkr = {
+ .enable_reg = 0x0d84,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_tsif_ahb_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
static struct clk_branch gcc_tsif_ref_clk = {
.halt_reg = 0x0d88,
.clkr = {
@@ -2007,6 +2190,19 @@ static struct clk_branch gcc_tsif_ref_clk = {
},
};
+static struct clk_branch gcc_ufs_ahb_clk = {
+ .halt_reg = 0x1d4c,
+ .clkr = {
+ .enable_reg = 0x1d4c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_ufs_ahb_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
static struct clk_branch gcc_ufs_axi_clk = {
.halt_reg = 0x1d48,
.clkr = {
@@ -2043,6 +2239,34 @@ static struct clk_branch gcc_ufs_rx_cfg_clk = {
},
};
+static struct clk_branch gcc_ufs_rx_symbol_0_clk = {
+ .halt_reg = 0x1d60,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x1d60,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_ufs_rx_symbol_0_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_ufs_rx_symbol_1_clk = {
+ .halt_reg = 0x1d64,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x1d64,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_ufs_rx_symbol_1_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
static struct clk_branch gcc_ufs_tx_cfg_clk = {
.halt_reg = 0x1d50,
.clkr = {
@@ -2061,6 +2285,47 @@ static struct clk_branch gcc_ufs_tx_cfg_clk = {
},
};
+static struct clk_branch gcc_ufs_tx_symbol_0_clk = {
+ .halt_reg = 0x1d58,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x1d58,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_ufs_tx_symbol_0_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_ufs_tx_symbol_1_clk = {
+ .halt_reg = 0x1d5c,
+ .halt_check = BRANCH_HALT_DELAY,
+ .clkr = {
+ .enable_reg = 0x1d5c,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_ufs_tx_symbol_1_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct clk_branch gcc_usb2_hs_phy_sleep_clk = {
+ .halt_reg = 0x04ac,
+ .clkr = {
+ .enable_reg = 0x04ac,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_usb2_hs_phy_sleep_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
static struct clk_branch gcc_usb30_master_clk = {
.halt_reg = 0x03c8,
.clkr = {
@@ -2097,6 +2362,19 @@ static struct clk_branch gcc_usb30_mock_utmi_clk = {
},
};
+static struct clk_branch gcc_usb30_sleep_clk = {
+ .halt_reg = 0x03cc,
+ .clkr = {
+ .enable_reg = 0x03cc,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_usb30_sleep_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
static struct clk_branch gcc_usb3_phy_aux_clk = {
.halt_reg = 0x1408,
.clkr = {
@@ -2115,6 +2393,19 @@ static struct clk_branch gcc_usb3_phy_aux_clk = {
},
};
+static struct clk_branch gcc_usb_hs_ahb_clk = {
+ .halt_reg = 0x0488,
+ .clkr = {
+ .enable_reg = 0x0488,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_usb_hs_ahb_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
static struct clk_branch gcc_usb_hs_system_clk = {
.halt_reg = 0x0484,
.clkr = {
@@ -2133,6 +2424,59 @@ static struct clk_branch gcc_usb_hs_system_clk = {
},
};
+static struct clk_branch gcc_usb_phy_cfg_ahb2phy_clk = {
+ .halt_reg = 0x1a84,
+ .clkr = {
+ .enable_reg = 0x1a84,
+ .enable_mask = BIT(0),
+ .hw.init = &(struct clk_init_data)
+ {
+ .name = "gcc_usb_phy_cfg_ahb2phy_clk",
+ .ops = &clk_branch2_ops,
+ },
+ },
+};
+
+static struct gdsc pcie_gdsc = {
+ .gdscr = 0x1e18,
+ .pd = {
+ .name = "pcie",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc pcie_0_gdsc = {
+ .gdscr = 0x1ac4,
+ .pd = {
+ .name = "pcie_0",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc pcie_1_gdsc = {
+ .gdscr = 0x1b44,
+ .pd = {
+ .name = "pcie_1",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc usb30_gdsc = {
+ .gdscr = 0x3c4,
+ .pd = {
+ .name = "usb30",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+};
+
+static struct gdsc ufs_gdsc = {
+ .gdscr = 0x1d44,
+ .pd = {
+ .name = "ufs",
+ },
+ .pwrsts = PWRSTS_OFF_ON,
+};
+
static struct clk_regmap *gcc_msm8994_clocks[] = {
[GPLL0_EARLY] = &gpll0_early.clkr,
[GPLL0] = &gpll0.clkr,
@@ -2233,26 +2577,64 @@ static struct clk_regmap *gcc_msm8994_clocks[] = {
[GCC_GP1_CLK] = &gcc_gp1_clk.clkr,
[GCC_GP2_CLK] = &gcc_gp2_clk.clkr,
[GCC_GP3_CLK] = &gcc_gp3_clk.clkr,
+ [GCC_LPASS_Q6_AXI_CLK] = &gcc_lpass_q6_axi_clk.clkr,
+ [GCC_MSS_Q6_BIMC_AXI_CLK] = &gcc_mss_q6_bimc_axi_clk.clkr,
[GCC_PCIE_0_AUX_CLK] = &gcc_pcie_0_aux_clk.clkr,
+ [GCC_PCIE_0_CFG_AHB_CLK] = &gcc_pcie_0_cfg_ahb_clk.clkr,
+ [GCC_PCIE_0_MSTR_AXI_CLK] = &gcc_pcie_0_mstr_axi_clk.clkr,
[GCC_PCIE_0_PIPE_CLK] = &gcc_pcie_0_pipe_clk.clkr,
+ [GCC_PCIE_0_SLV_AXI_CLK] = &gcc_pcie_0_slv_axi_clk.clkr,
[GCC_PCIE_1_AUX_CLK] = &gcc_pcie_1_aux_clk.clkr,
+ [GCC_PCIE_1_CFG_AHB_CLK] = &gcc_pcie_1_cfg_ahb_clk.clkr,
+ [GCC_PCIE_1_MSTR_AXI_CLK] = &gcc_pcie_1_mstr_axi_clk.clkr,
[GCC_PCIE_1_PIPE_CLK] = &gcc_pcie_1_pipe_clk.clkr,
+ [GCC_PCIE_1_SLV_AXI_CLK] = &gcc_pcie_1_slv_axi_clk.clkr,
[GCC_PDM2_CLK] = &gcc_pdm2_clk.clkr,
+ [GCC_PDM_AHB_CLK] = &gcc_pdm_ahb_clk.clkr,
+ [GCC_SDCC1_AHB_CLK] = &gcc_sdcc1_ahb_clk.clkr,
[GCC_SDCC1_APPS_CLK] = &gcc_sdcc1_apps_clk.clkr,
+ [GCC_SDCC2_AHB_CLK] = &gcc_sdcc2_ahb_clk.clkr,
[GCC_SDCC2_APPS_CLK] = &gcc_sdcc2_apps_clk.clkr,
+ [GCC_SDCC3_AHB_CLK] = &gcc_sdcc3_ahb_clk.clkr,
[GCC_SDCC3_APPS_CLK] = &gcc_sdcc3_apps_clk.clkr,
+ [GCC_SDCC4_AHB_CLK] = &gcc_sdcc4_ahb_clk.clkr,
[GCC_SDCC4_APPS_CLK] = &gcc_sdcc4_apps_clk.clkr,
- [GCC_SDCC1_AHB_CLK] = &gcc_sdcc1_ahb_clk.clkr,
[GCC_SYS_NOC_UFS_AXI_CLK] = &gcc_sys_noc_ufs_axi_clk.clkr,
[GCC_SYS_NOC_USB3_AXI_CLK] = &gcc_sys_noc_usb3_axi_clk.clkr,
+ [GCC_TSIF_AHB_CLK] = &gcc_tsif_ahb_clk.clkr,
[GCC_TSIF_REF_CLK] = &gcc_tsif_ref_clk.clkr,
+ [GCC_UFS_AHB_CLK] = &gcc_ufs_ahb_clk.clkr,
[GCC_UFS_AXI_CLK] = &gcc_ufs_axi_clk.clkr,
[GCC_UFS_RX_CFG_CLK] = &gcc_ufs_rx_cfg_clk.clkr,
+ [GCC_UFS_RX_SYMBOL_0_CLK] = &gcc_ufs_rx_symbol_0_clk.clkr,
+ [GCC_UFS_RX_SYMBOL_1_CLK] = &gcc_ufs_rx_symbol_1_clk.clkr,
[GCC_UFS_TX_CFG_CLK] = &gcc_ufs_tx_cfg_clk.clkr,
+ [GCC_UFS_TX_SYMBOL_0_CLK] = &gcc_ufs_tx_symbol_0_clk.clkr,
+ [GCC_UFS_TX_SYMBOL_1_CLK] = &gcc_ufs_tx_symbol_1_clk.clkr,
+ [GCC_USB2_HS_PHY_SLEEP_CLK] = &gcc_usb2_hs_phy_sleep_clk.clkr,
[GCC_USB30_MASTER_CLK] = &gcc_usb30_master_clk.clkr,
[GCC_USB30_MOCK_UTMI_CLK] = &gcc_usb30_mock_utmi_clk.clkr,
+ [GCC_USB30_SLEEP_CLK] = &gcc_usb30_sleep_clk.clkr,
[GCC_USB3_PHY_AUX_CLK] = &gcc_usb3_phy_aux_clk.clkr,
+ [GCC_USB_HS_AHB_CLK] = &gcc_usb_hs_ahb_clk.clkr,
[GCC_USB_HS_SYSTEM_CLK] = &gcc_usb_hs_system_clk.clkr,
+ [GCC_USB_PHY_CFG_AHB2PHY_CLK] = &gcc_usb_phy_cfg_ahb2phy_clk.clkr,
+};
+
+static struct gdsc *gcc_msm8994_gdscs[] = {
+ [PCIE_GDSC] = &pcie_gdsc,
+ [PCIE_0_GDSC] = &pcie_0_gdsc,
+ [PCIE_1_GDSC] = &pcie_1_gdsc,
+ [USB30_GDSC] = &usb30_gdsc,
+ [UFS_GDSC] = &ufs_gdsc,
+};
+
+static const struct qcom_reset_map gcc_msm8994_resets[] = {
+ [USB3_PHY_RESET] = { 0x1400 },
+ [USB3PHY_PHY_RESET] = { 0x1404 },
+ [PCIE_PHY_0_RESET] = { 0x1b18 },
+ [PCIE_PHY_1_RESET] = { 0x1b98 },
+ [QUSB2_PHY_RESET] = { 0x04b8 },
};
static const struct regmap_config gcc_msm8994_regmap_config = {
@@ -2267,6 +2649,10 @@ static const struct qcom_cc_desc gcc_msm8994_desc = {
.config = &gcc_msm8994_regmap_config,
.clks = gcc_msm8994_clocks,
.num_clks = ARRAY_SIZE(gcc_msm8994_clocks),
+ .resets = gcc_msm8994_resets,
+ .num_resets = ARRAY_SIZE(gcc_msm8994_resets),
+ .gdscs = gcc_msm8994_gdscs,
+ .num_gdscs = ARRAY_SIZE(gcc_msm8994_gdscs),
};
static const struct of_device_id gcc_msm8994_match_table[] = {
diff --git a/include/dt-bindings/clock/qcom,gcc-msm8994.h b/include/dt-bindings/clock/qcom,gcc-msm8994.h
index 938969309e00..507b8d6effd2 100644
--- a/include/dt-bindings/clock/qcom,gcc-msm8994.h
+++ b/include/dt-bindings/clock/qcom,gcc-msm8994.h
@@ -126,5 +126,41 @@
#define GCC_USB3_PHY_AUX_CLK 116
#define GCC_USB_HS_SYSTEM_CLK 117
#define GCC_SDCC1_AHB_CLK 118
+#define GCC_LPASS_Q6_AXI_CLK 119
+#define GCC_MSS_Q6_BIMC_AXI_CLK 120
+#define GCC_PCIE_0_CFG_AHB_CLK 121
+#define GCC_PCIE_0_MSTR_AXI_CLK 122
+#define GCC_PCIE_0_SLV_AXI_CLK 123
+#define GCC_PCIE_1_CFG_AHB_CLK 124
+#define GCC_PCIE_1_MSTR_AXI_CLK 125
+#define GCC_PCIE_1_SLV_AXI_CLK 126
+#define GCC_PDM_AHB_CLK 127
+#define GCC_SDCC2_AHB_CLK 128
+#define GCC_SDCC3_AHB_CLK 129
+#define GCC_SDCC4_AHB_CLK 130
+#define GCC_TSIF_AHB_CLK 131
+#define GCC_UFS_AHB_CLK 132
+#define GCC_UFS_RX_SYMBOL_0_CLK 133
+#define GCC_UFS_RX_SYMBOL_1_CLK 134
+#define GCC_UFS_TX_SYMBOL_0_CLK 135
+#define GCC_UFS_TX_SYMBOL_1_CLK 136
+#define GCC_USB2_HS_PHY_SLEEP_CLK 137
+#define GCC_USB30_SLEEP_CLK 138
+#define GCC_USB_HS_AHB_CLK 139
+#define GCC_USB_PHY_CFG_AHB2PHY_CLK 140
+
+/* GDSCs */
+#define PCIE_GDSC 0
+#define PCIE_0_GDSC 1
+#define PCIE_1_GDSC 2
+#define USB30_GDSC 3
+#define UFS_GDSC 4
+
+/* Resets */
+#define USB3_PHY_RESET 0
+#define USB3PHY_PHY_RESET 1
+#define PCIE_PHY_0_RESET 2
+#define PCIE_PHY_1_RESET 3
+#define QUSB2_PHY_RESET 4
#endif
--
2.27.0
This will be required to support touchscreen on Lumia
devices.
Signed-off-by: Konrad Dybcio <[email protected]>
---
arch/arm64/boot/dts/qcom/msm8992.dtsi | 35 +++++++++++++++++++++++++++
1 file changed, 35 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8992.dtsi b/arch/arm64/boot/dts/qcom/msm8992.dtsi
index 9b42ac42b171..c7dc81311f6a 100644
--- a/arch/arm64/boot/dts/qcom/msm8992.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8992.dtsi
@@ -304,6 +304,27 @@ blsp1_uart2: serial@f991e000 {
status = "disabled";
};
+ /*
+ * This I2C seems to only be present on WP platforms
+ * and is likely disabled in firmware
+ * (hangs at least one device) on android platforms.
+ */
+ blsp_i2c1: i2c@f9923000 {
+ compatible = "qcom,i2c-qup-v2.2.1";
+ reg = <0xf9923000 0x500>;
+ interrupts = <GIC_SPI 95 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&gcc GCC_BLSP1_AHB_CLK>,
+ <&gcc GCC_BLSP1_QUP1_I2C_APPS_CLK>;
+ clock-names = "iface", "core";
+ clock-frequency = <400000>;
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&i2c1_default>;
+ pinctrl-1 = <&i2c1_sleep>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
blsp_i2c2: i2c@f9924000 {
compatible = "qcom,i2c-qup-v2.2.1";
reg = <0xf9924000 0x500>;
@@ -524,6 +545,20 @@ sdc1_rclk_off: rclk-off {
bias-pull-down;
};
+ i2c1_default: i2c1-default {
+ function = "blsp_i2c1";
+ pins = "gpio2", "gpio3";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
+ i2c1_sleep: i2c1-sleep {
+ function = "gpio";
+ pins = "gpio2", "gpio3";
+ drive-strength = <2>;
+ bias-disable;
+ };
+
i2c2_default: i2c2-default {
function = "blsp_i2c2";
pins = "gpio6", "gpio7";
--
2.27.0
Add SDHCI2 to enable use of uSD cards on msm8994.
Signed-off-by: Konrad Dybcio <[email protected]>
---
arch/arm64/boot/dts/qcom/msm8994.dtsi | 58 +++++++++++++++++++++++++++
1 file changed, 58 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8994.dtsi b/arch/arm64/boot/dts/qcom/msm8994.dtsi
index 69c99a4cd817..58fc8b0321c3 100644
--- a/arch/arm64/boot/dts/qcom/msm8994.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8994.dtsi
@@ -336,6 +336,28 @@ sdhc1: sdhci@f9824900 {
status = "disabled";
};
+ sdhc2: sdhci@f98a4900 {
+ compatible = "qcom,sdhci-msm-v4";
+ reg = <0xf98a4900 0x11c>, <0xf98a4000 0x800>;
+ reg-names = "hc_mem", "core_mem";
+
+ interrupts = <GIC_SPI 125 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "hc_irq", "pwr_irq";
+
+ clocks = <&gcc GCC_SDCC2_APPS_CLK>,
+ <&gcc GCC_SDCC2_AHB_CLK>,
+ <&xo_board>;
+ clock-names = "core", "iface", "xo";
+
+ pinctrl-names = "default", "sleep";
+ pinctrl-0 = <&sdc2_clk_on &sdc2_cmd_on &sdc2_data_on>;
+ pinctrl-1 = <&sdc2_clk_off &sdc2_cmd_off &sdc2_data_off>;
+
+ bus-width = <4>;
+ status = "disabled";
+ };
+
blsp1_dma: dma@f9904000 {
compatible = "qcom,bam-v1.7.0";
reg = <0xf9904000 0x19000>;
@@ -714,6 +736,42 @@ sdc1_rclk_off: rclk-off {
pins = "sdc1_rclk";
bias-pull-down;
};
+
+ sdc2_clk_on: sdc2-clk-on {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <10>;
+ };
+
+ sdc2_clk_off: sdc2-clk-off {
+ pins = "sdc2_clk";
+ bias-disable;
+ drive-strength = <2>;
+ };
+
+ sdc2_cmd_on: sdc2-cmd-on {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ sdc2_cmd_off: sdc2-cmd-off {
+ pins = "sdc2_cmd";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ sdc2_data_on: sdc2-data-on {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <10>;
+ };
+
+ sdc2_data_off: sdc2-data-off {
+ pins = "sdc2_data";
+ bias-pull-up;
+ drive-strength = <2>;
+ };
};
};
--
2.27.0
Quoting Konrad Dybcio (2020-07-28 05:00:45)
> This change adds GDSCs, resets and most of the missing
> clocks to the msm8994 GCC driver. The remaining ones
> are of local_vote_clk and gate_clk type, which are not
> yet supported upstream. Also reorder them to match the
> original downstream driver.
>
> Signed-off-by: Konrad Dybcio <[email protected]>
> ---
> I plan on converting this to use parent_data later on,
> but I think we could merge it as-is for now..?
Why not convert to parent_data now? Otherwise we can wait given that the
merge window is near anyway.