Add binding documentation for mmc host controllers present on
TI's J7200 SOC
Signed-off-by: Faiz Abbas <[email protected]>
---
Documentation/devicetree/bindings/mmc/sdhci-am654.txt | 6 +++++-
1 file changed, 5 insertions(+), 1 deletion(-)
diff --git a/Documentation/devicetree/bindings/mmc/sdhci-am654.txt b/Documentation/devicetree/bindings/mmc/sdhci-am654.txt
index 6d202f4d9249..b49cbfdd679f 100644
--- a/Documentation/devicetree/bindings/mmc/sdhci-am654.txt
+++ b/Documentation/devicetree/bindings/mmc/sdhci-am654.txt
@@ -12,6 +12,8 @@ Required Properties:
"ti,am654-sdhci-5.1": SDHCI on AM654 device.
"ti,j721e-sdhci-8bit": 8 bit SDHCI on J721E device.
"ti,j721e-sdhci-4bit": 4 bit SDHCI on J721E device.
+ "ti,j7200-sdhci-8bit": 8 bit SDHCI on J7200 device.
+ "ti,j7200-sdhci-4bit": 4 bit SDHCI on J7200 device.
- reg: Must be two entries.
- The first should be the sdhci register space
- The second should the subsystem/phy register space
@@ -33,7 +35,9 @@ Required Properties:
These bindings must be provided otherwise the driver will disable the
corresponding speed mode (i.e. all nodes must provide at least -legacy)
-Optional Properties (Required for ti,am654-sdhci-5.1 and ti,j721e-sdhci-8bit):
+Optional Properties (Required for ti,am654-sdhci-5.1,
+ ti,j721e-sdhci-8bit,
+ ti,j7200-sdhci-8bit):
- ti,trm-icp: DLL trim select
- ti,driver-strength-ohm: driver strength in ohms.
Valid values are 33, 40, 50, 66 and 100 ohms.
--
2.17.1
On Sun, 02 Aug 2020 12:31:14 +0530, Faiz Abbas wrote:
> Add binding documentation for mmc host controllers present on
> TI's J7200 SOC
>
> Signed-off-by: Faiz Abbas <[email protected]>
> ---
> Documentation/devicetree/bindings/mmc/sdhci-am654.txt | 6 +++++-
> 1 file changed, 5 insertions(+), 1 deletion(-)
>
Acked-by: Rob Herring <[email protected]>
Hi Ulf,
On 18/08/20 2:47 am, Rob Herring wrote:
> On Sun, 02 Aug 2020 12:31:14 +0530, Faiz Abbas wrote:
>> Add binding documentation for mmc host controllers present on
>> TI's J7200 SOC
>>
>> Signed-off-by: Faiz Abbas <[email protected]>
>> ---
>> Documentation/devicetree/bindings/mmc/sdhci-am654.txt | 6 +++++-
>> 1 file changed, 5 insertions(+), 1 deletion(-)
>>
>
> Acked-by: Rob Herring <[email protected]>
>
Can you pick this up now or should I rebase to latest?
Thanks,
Faiz
On Sun, 2 Aug 2020 at 09:01, Faiz Abbas <[email protected]> wrote:
>
> Add binding documentation for mmc host controllers present on
> TI's J7200 SOC
>
> Signed-off-by: Faiz Abbas <[email protected]>
Applied for next, thanks!
Kind regards
Uffe
> ---
> Documentation/devicetree/bindings/mmc/sdhci-am654.txt | 6 +++++-
> 1 file changed, 5 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/mmc/sdhci-am654.txt b/Documentation/devicetree/bindings/mmc/sdhci-am654.txt
> index 6d202f4d9249..b49cbfdd679f 100644
> --- a/Documentation/devicetree/bindings/mmc/sdhci-am654.txt
> +++ b/Documentation/devicetree/bindings/mmc/sdhci-am654.txt
> @@ -12,6 +12,8 @@ Required Properties:
> "ti,am654-sdhci-5.1": SDHCI on AM654 device.
> "ti,j721e-sdhci-8bit": 8 bit SDHCI on J721E device.
> "ti,j721e-sdhci-4bit": 4 bit SDHCI on J721E device.
> + "ti,j7200-sdhci-8bit": 8 bit SDHCI on J7200 device.
> + "ti,j7200-sdhci-4bit": 4 bit SDHCI on J7200 device.
> - reg: Must be two entries.
> - The first should be the sdhci register space
> - The second should the subsystem/phy register space
> @@ -33,7 +35,9 @@ Required Properties:
> These bindings must be provided otherwise the driver will disable the
> corresponding speed mode (i.e. all nodes must provide at least -legacy)
>
> -Optional Properties (Required for ti,am654-sdhci-5.1 and ti,j721e-sdhci-8bit):
> +Optional Properties (Required for ti,am654-sdhci-5.1,
> + ti,j721e-sdhci-8bit,
> + ti,j7200-sdhci-8bit):
> - ti,trm-icp: DLL trim select
> - ti,driver-strength-ohm: driver strength in ohms.
> Valid values are 33, 40, 50, 66 and 100 ohms.
> --
> 2.17.1
>