On some platform(.e.g. i.MX8QM MEK), the "extal" clock is different
with the mclk of codec, then the clock rate is also different.
So it is better to get clock rate of "extal" rate by clk_get_rate,
don't reuse the clock rate of mclk.
Signed-off-by: Shengjiu Wang <[email protected]>
---
changes in v2
- add defer probe handler
sound/soc/fsl/fsl-asoc-card.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/sound/soc/fsl/fsl-asoc-card.c b/sound/soc/fsl/fsl-asoc-card.c
index 52adedc03245..32f8f756e6bb 100644
--- a/sound/soc/fsl/fsl-asoc-card.c
+++ b/sound/soc/fsl/fsl-asoc-card.c
@@ -696,6 +696,17 @@ static int fsl_asoc_card_probe(struct platform_device *pdev)
goto asrc_fail;
}
} else if (of_node_name_eq(cpu_np, "esai")) {
+ struct clk *esai_clk = clk_get(&cpu_pdev->dev, "extal");
+
+ if (!IS_ERR(esai_clk)) {
+ priv->cpu_priv.sysclk_freq[TX] = clk_get_rate(esai_clk);
+ priv->cpu_priv.sysclk_freq[RX] = clk_get_rate(esai_clk);
+ clk_put(esai_clk);
+ } else if (PTR_ERR(esai_clk) == -EPROBE_DEFER) {
+ ret = -EPROBE_DEFER;
+ goto asrc_fail;
+ }
+
priv->cpu_priv.sysclk_id[1] = ESAI_HCKT_EXTAL;
priv->cpu_priv.sysclk_id[0] = ESAI_HCKR_EXTAL;
} else if (of_node_name_eq(cpu_np, "sai")) {
--
2.27.0
On Mon, Aug 10, 2020 at 04:11:43PM +0800, Shengjiu Wang wrote:
> On some platform(.e.g. i.MX8QM MEK), the "extal" clock is different
> with the mclk of codec, then the clock rate is also different.
> So it is better to get clock rate of "extal" rate by clk_get_rate,
> don't reuse the clock rate of mclk.
>
> Signed-off-by: Shengjiu Wang <[email protected]>
> ---
> changes in v2
> - add defer probe handler
>
> sound/soc/fsl/fsl-asoc-card.c | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/sound/soc/fsl/fsl-asoc-card.c b/sound/soc/fsl/fsl-asoc-card.c
> index 52adedc03245..32f8f756e6bb 100644
> --- a/sound/soc/fsl/fsl-asoc-card.c
> +++ b/sound/soc/fsl/fsl-asoc-card.c
> @@ -696,6 +696,17 @@ static int fsl_asoc_card_probe(struct platform_device *pdev)
> goto asrc_fail;
> }
> } else if (of_node_name_eq(cpu_np, "esai")) {
> + struct clk *esai_clk = clk_get(&cpu_pdev->dev, "extal");
> +
> + if (!IS_ERR(esai_clk)) {
> + priv->cpu_priv.sysclk_freq[TX] = clk_get_rate(esai_clk);
> + priv->cpu_priv.sysclk_freq[RX] = clk_get_rate(esai_clk);
Will it break existing imx-audio-cs42888 on older i.MX platforms?
'cause it overwrites cpu_priv.sysclk_freq[] that are set in "card
configurations" section.
On Mon, Aug 10, 2020 at 4:39 PM Nicolin Chen <[email protected]> wrote:
>
> On Mon, Aug 10, 2020 at 04:11:43PM +0800, Shengjiu Wang wrote:
> > On some platform(.e.g. i.MX8QM MEK), the "extal" clock is different
> > with the mclk of codec, then the clock rate is also different.
> > So it is better to get clock rate of "extal" rate by clk_get_rate,
> > don't reuse the clock rate of mclk.
> >
> > Signed-off-by: Shengjiu Wang <[email protected]>
> > ---
> > changes in v2
> > - add defer probe handler
> >
> > sound/soc/fsl/fsl-asoc-card.c | 11 +++++++++++
> > 1 file changed, 11 insertions(+)
> >
> > diff --git a/sound/soc/fsl/fsl-asoc-card.c b/sound/soc/fsl/fsl-asoc-card.c
> > index 52adedc03245..32f8f756e6bb 100644
> > --- a/sound/soc/fsl/fsl-asoc-card.c
> > +++ b/sound/soc/fsl/fsl-asoc-card.c
> > @@ -696,6 +696,17 @@ static int fsl_asoc_card_probe(struct platform_device *pdev)
> > goto asrc_fail;
> > }
> > } else if (of_node_name_eq(cpu_np, "esai")) {
> > + struct clk *esai_clk = clk_get(&cpu_pdev->dev, "extal");
> > +
> > + if (!IS_ERR(esai_clk)) {
> > + priv->cpu_priv.sysclk_freq[TX] = clk_get_rate(esai_clk);
> > + priv->cpu_priv.sysclk_freq[RX] = clk_get_rate(esai_clk);
>
> Will it break existing imx-audio-cs42888 on older i.MX platforms?
> 'cause it overwrites cpu_priv.sysclk_freq[] that are set in "card
> configurations" section.
Tested, no break for imx6.
best regards
wang shengjiu
On Mon, Aug 10, 2020 at 04:11:43PM +0800, Shengjiu Wang wrote:
> On some platform(.e.g. i.MX8QM MEK), the "extal" clock is different
> with the mclk of codec, then the clock rate is also different.
> So it is better to get clock rate of "extal" rate by clk_get_rate,
> don't reuse the clock rate of mclk.
>
> Signed-off-by: Shengjiu Wang <[email protected]>
Acked-by: Nicolin Chen <[email protected]>
On Mon, 10 Aug 2020 16:11:43 +0800, Shengjiu Wang wrote:
> On some platform(.e.g. i.MX8QM MEK), the "extal" clock is different
> with the mclk of codec, then the clock rate is also different.
> So it is better to get clock rate of "extal" rate by clk_get_rate,
> don't reuse the clock rate of mclk.
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/1] ASoC: fsl-asoc-card: Get "extal" clock rate by clk_get_rate
commit: a8fd5ca8016948a611bff62b0990ade9e1f8e83c
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark