Thanks to the feedback on the first version, this one removes even more code.
I have simplified patch 1/1 to just address the issue without moving code,
since this is easier to understand and needs to be done for 2/2 anyway. As a
consequence the code has changed a bit and I did not carry the Reviewed-by tags.
Changes from v1:
* Simplify patch 1/1,
* Remove unneeded checks for DONE or ERROR status,
* Rephrased comment about exiting early.
Alexandre Courbot (2):
media: v4l2-mem2mem: always consider OUTPUT queue during poll
media: v4l2-mem2mem: simplify poll logic
drivers/media/v4l2-core/v4l2-mem2mem.c | 28 +++++---------------------
1 file changed, 5 insertions(+), 23 deletions(-)
--
2.28.0
Factorize redundant checks into a single code block, remove unneeded
checks (a buffer in done_list is necessarily in the DONE or ERROR
state), and we end up with a much simpler version of this function.
Signed-off-by: Alexandre Courbot <[email protected]>
---
drivers/media/v4l2-core/v4l2-mem2mem.c | 26 +++++---------------------
1 file changed, 5 insertions(+), 21 deletions(-)
diff --git a/drivers/media/v4l2-core/v4l2-mem2mem.c b/drivers/media/v4l2-core/v4l2-mem2mem.c
index fe90c3c0e4128..af8138c5d7ced 100644
--- a/drivers/media/v4l2-core/v4l2-mem2mem.c
+++ b/drivers/media/v4l2-core/v4l2-mem2mem.c
@@ -841,7 +841,6 @@ static __poll_t v4l2_m2m_poll_for_data(struct file *file,
struct poll_table_struct *wait)
{
struct vb2_queue *src_q, *dst_q;
- struct vb2_buffer *src_vb = NULL, *dst_vb = NULL;
__poll_t rc = 0;
unsigned long flags;
@@ -862,32 +861,17 @@ static __poll_t v4l2_m2m_poll_for_data(struct file *file,
list_empty(&dst_q->queued_list)))
return EPOLLERR;
- spin_lock_irqsave(&dst_q->done_lock, flags);
- if (list_empty(&dst_q->done_list)) {
- /*
- * If the last buffer was dequeued from the capture queue,
- * return immediately. DQBUF will return -EPIPE.
- */
- if (dst_q->last_buffer_dequeued)
- rc |= EPOLLIN | EPOLLRDNORM;
- }
- spin_unlock_irqrestore(&dst_q->done_lock, flags);
-
spin_lock_irqsave(&src_q->done_lock, flags);
if (!list_empty(&src_q->done_list))
- src_vb = list_first_entry(&src_q->done_list, struct vb2_buffer,
- done_entry);
- if (src_vb && (src_vb->state == VB2_BUF_STATE_DONE
- || src_vb->state == VB2_BUF_STATE_ERROR))
rc |= EPOLLOUT | EPOLLWRNORM;
spin_unlock_irqrestore(&src_q->done_lock, flags);
spin_lock_irqsave(&dst_q->done_lock, flags);
- if (!list_empty(&dst_q->done_list))
- dst_vb = list_first_entry(&dst_q->done_list, struct vb2_buffer,
- done_entry);
- if (dst_vb && (dst_vb->state == VB2_BUF_STATE_DONE
- || dst_vb->state == VB2_BUF_STATE_ERROR))
+ /*
+ * If the last buffer was dequeued from the capture queue, signal
+ * userspace. DQBUF(CAPTURE) will return -EPIPE.
+ */
+ if (!list_empty(&dst_q->done_list) || dst_q->last_buffer_dequeued)
rc |= EPOLLIN | EPOLLRDNORM;
spin_unlock_irqrestore(&dst_q->done_lock, flags);
--
2.28.0
If poll() is called on a m2m device with the EPOLLOUT event after the
last buffer of the CAPTURE queue is dequeued, any buffer available on
OUTPUT queue will never be signaled because v4l2_m2m_poll_for_data()
starts by checking whether dst_q->last_buffer_dequeued is set and
returns EPOLLIN in this case, without looking at the state of the OUTPUT
queue.
Fix this by not early returning so we keep checking the state of the
OUTPUT queue afterwards.
Signed-off-by: Alexandre Courbot <[email protected]>
---
drivers/media/v4l2-core/v4l2-mem2mem.c | 6 ++----
1 file changed, 2 insertions(+), 4 deletions(-)
diff --git a/drivers/media/v4l2-core/v4l2-mem2mem.c b/drivers/media/v4l2-core/v4l2-mem2mem.c
index 95a8f2dc5341d..fe90c3c0e4128 100644
--- a/drivers/media/v4l2-core/v4l2-mem2mem.c
+++ b/drivers/media/v4l2-core/v4l2-mem2mem.c
@@ -868,10 +868,8 @@ static __poll_t v4l2_m2m_poll_for_data(struct file *file,
* If the last buffer was dequeued from the capture queue,
* return immediately. DQBUF will return -EPIPE.
*/
- if (dst_q->last_buffer_dequeued) {
- spin_unlock_irqrestore(&dst_q->done_lock, flags);
- return EPOLLIN | EPOLLRDNORM;
- }
+ if (dst_q->last_buffer_dequeued)
+ rc |= EPOLLIN | EPOLLRDNORM;
}
spin_unlock_irqrestore(&dst_q->done_lock, flags);
--
2.28.0
On Thu, 27 Aug 2020 at 09:50, Alexandre Courbot <[email protected]> wrote:
>
> If poll() is called on a m2m device with the EPOLLOUT event after the
> last buffer of the CAPTURE queue is dequeued, any buffer available on
> OUTPUT queue will never be signaled because v4l2_m2m_poll_for_data()
> starts by checking whether dst_q->last_buffer_dequeued is set and
> returns EPOLLIN in this case, without looking at the state of the OUTPUT
> queue.
>
> Fix this by not early returning so we keep checking the state of the
> OUTPUT queue afterwards.
>
> Signed-off-by: Alexandre Courbot <[email protected]>
Reviewed-by: Ezequiel Garcia <[email protected]>
> ---
> drivers/media/v4l2-core/v4l2-mem2mem.c | 6 ++----
> 1 file changed, 2 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/media/v4l2-core/v4l2-mem2mem.c b/drivers/media/v4l2-core/v4l2-mem2mem.c
> index 95a8f2dc5341d..fe90c3c0e4128 100644
> --- a/drivers/media/v4l2-core/v4l2-mem2mem.c
> +++ b/drivers/media/v4l2-core/v4l2-mem2mem.c
> @@ -868,10 +868,8 @@ static __poll_t v4l2_m2m_poll_for_data(struct file *file,
> * If the last buffer was dequeued from the capture queue,
> * return immediately. DQBUF will return -EPIPE.
> */
> - if (dst_q->last_buffer_dequeued) {
> - spin_unlock_irqrestore(&dst_q->done_lock, flags);
> - return EPOLLIN | EPOLLRDNORM;
> - }
> + if (dst_q->last_buffer_dequeued)
> + rc |= EPOLLIN | EPOLLRDNORM;
> }
> spin_unlock_irqrestore(&dst_q->done_lock, flags);
>
> --
> 2.28.0
>
On Thu, 27 Aug 2020 at 09:50, Alexandre Courbot <[email protected]> wrote:
>
> Factorize redundant checks into a single code block, remove unneeded
> checks (a buffer in done_list is necessarily in the DONE or ERROR
> state), and we end up with a much simpler version of this function.
>
> Signed-off-by: Alexandre Courbot <[email protected]>
This is really good, thanks!
Reviewed-by: Ezequiel Garcia <[email protected]>
> ---
> drivers/media/v4l2-core/v4l2-mem2mem.c | 26 +++++---------------------
> 1 file changed, 5 insertions(+), 21 deletions(-)
>
> diff --git a/drivers/media/v4l2-core/v4l2-mem2mem.c b/drivers/media/v4l2-core/v4l2-mem2mem.c
> index fe90c3c0e4128..af8138c5d7ced 100644
> --- a/drivers/media/v4l2-core/v4l2-mem2mem.c
> +++ b/drivers/media/v4l2-core/v4l2-mem2mem.c
> @@ -841,7 +841,6 @@ static __poll_t v4l2_m2m_poll_for_data(struct file *file,
> struct poll_table_struct *wait)
> {
> struct vb2_queue *src_q, *dst_q;
> - struct vb2_buffer *src_vb = NULL, *dst_vb = NULL;
> __poll_t rc = 0;
> unsigned long flags;
>
> @@ -862,32 +861,17 @@ static __poll_t v4l2_m2m_poll_for_data(struct file *file,
> list_empty(&dst_q->queued_list)))
> return EPOLLERR;
>
> - spin_lock_irqsave(&dst_q->done_lock, flags);
> - if (list_empty(&dst_q->done_list)) {
> - /*
> - * If the last buffer was dequeued from the capture queue,
> - * return immediately. DQBUF will return -EPIPE.
> - */
> - if (dst_q->last_buffer_dequeued)
> - rc |= EPOLLIN | EPOLLRDNORM;
> - }
> - spin_unlock_irqrestore(&dst_q->done_lock, flags);
> -
> spin_lock_irqsave(&src_q->done_lock, flags);
> if (!list_empty(&src_q->done_list))
> - src_vb = list_first_entry(&src_q->done_list, struct vb2_buffer,
> - done_entry);
> - if (src_vb && (src_vb->state == VB2_BUF_STATE_DONE
> - || src_vb->state == VB2_BUF_STATE_ERROR))
> rc |= EPOLLOUT | EPOLLWRNORM;
> spin_unlock_irqrestore(&src_q->done_lock, flags);
>
> spin_lock_irqsave(&dst_q->done_lock, flags);
> - if (!list_empty(&dst_q->done_list))
> - dst_vb = list_first_entry(&dst_q->done_list, struct vb2_buffer,
> - done_entry);
> - if (dst_vb && (dst_vb->state == VB2_BUF_STATE_DONE
> - || dst_vb->state == VB2_BUF_STATE_ERROR))
> + /*
> + * If the last buffer was dequeued from the capture queue, signal
> + * userspace. DQBUF(CAPTURE) will return -EPIPE.
> + */
> + if (!list_empty(&dst_q->done_list) || dst_q->last_buffer_dequeued)
> rc |= EPOLLIN | EPOLLRDNORM;
> spin_unlock_irqrestore(&dst_q->done_lock, flags);
>
> --
> 2.28.0
>