Presently non-standard HW errors are not reported to the vendor drivers
for the recovery.
This patch set adds support for reporting the non-standard errors to the
registered vendor drivers.
Also adds HIP08 EDAC driver, for the recovery of the PCIe OEM errors on
HiSilicon HIP08.
RFC -> V2
1.Add error recovery for the PCIe local errors
2.Removed code for the other OEM errors from HIP08 edac driver
because there is no current requirement for the recovery.
Shiju Jose (2):
EDAC: Add support for reporting the non-standard errors to the vendor
drivers
EDAC: Add handling for the PCIe OEM errors on HiSilicon HIP08
drivers/acpi/apei/ghes.c | 5 +
drivers/edac/Makefile | 3 +-
drivers/edac/edac_non_standard.c | 124 ++++++++++++++
drivers/edac/hisi_hip08_edac_non_standard.c | 255 ++++++++++++++++++++++++++++
include/linux/edac_non_standard.h | 74 ++++++++
5 files changed, 460 insertions(+), 1 deletion(-)
create mode 100644 drivers/edac/edac_non_standard.c
create mode 100644 drivers/edac/hisi_hip08_edac_non_standard.c
create mode 100644 include/linux/edac_non_standard.h
--
1.9.1
Sorry. Please ignore this.
>-----Original Message-----
>From: [email protected] [mailto:linux-edac-
>[email protected]] On Behalf Of Shiju Jose
>Sent: 27 August 2020 15:01
>To: [email protected]; [email protected]; [email protected];
>[email protected]; [email protected]; [email protected];
>[email protected]
>Cc: Linuxarm <[email protected]>
>Subject: [PATCH V2 topic-edac-5.1 0/2] EDAC: Add support for reporting the
>non-standard errors to vendor drivers
>
>Presently non-standard HW errors are not reported to the vendor drivers for
>the recovery.
>This patch set adds support for reporting the non-standard errors to the
>registered vendor drivers.
>Also adds HIP08 EDAC driver, for the recovery of the PCIe OEM errors on
>HiSilicon HIP08.
>
>RFC -> V2
>1.Add error recovery for the PCIe local errors 2.Removed code for the other
>OEM errors from HIP08 edac driver
> because there is no current requirement for the recovery.
>
>Shiju Jose (2):
> EDAC: Add support for reporting the non-standard errors to the vendor
> drivers
> EDAC: Add handling for the PCIe OEM errors on HiSilicon HIP08
>
> drivers/acpi/apei/ghes.c | 5 +
> drivers/edac/Makefile | 3 +-
> drivers/edac/edac_non_standard.c | 124 ++++++++++++++
> drivers/edac/hisi_hip08_edac_non_standard.c | 255
>++++++++++++++++++++++++++++
> include/linux/edac_non_standard.h | 74 ++++++++
> 5 files changed, 460 insertions(+), 1 deletion(-) create mode 100644
>drivers/edac/edac_non_standard.c create mode 100644
>drivers/edac/hisi_hip08_edac_non_standard.c
> create mode 100644 include/linux/edac_non_standard.h
>
>--
>1.9.1
>