2020-08-23 11:19:27

by Krzysztof Kozlowski

Subject: [PATCH 1/5] arm64: dts: imx8mm-evk: Replace deprecated phy reset properties

Use preferred properties of phy node instead of deprecated
phy-reset-gpios (and others). This avoids copying deprecated code into
future DTSes.

Signed-off-by: Krzysztof Kozlowski <[email protected]>

---

Not tested on HW.
---
arch/arm64/boot/dts/freescale/imx8mm-evk.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
index 19a22d0d0730..c1f7d44651df 100644
--- a/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mm-evk.dts
@@ -119,8 +119,6 @@
pinctrl-0 = <&pinctrl_fec1>;
phy-mode = "rgmii-id";
phy-handle = <&ethphy0>;
- phy-reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
- phy-reset-duration = <10>;
fsl,magic-packet;
status = "okay";

@@ -131,6 +129,8 @@
ethphy0: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
+ reset-gpios = <&gpio4 22 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
};
};
};
--
2.17.1

2020-08-23 11:21:47

by Krzysztof Kozlowski

Subject: [PATCH 4/5] arm64: dts: imx8mq-sr-som: Replace deprecated phy reset properties

Use preferred properties of phy node instead of deprecated
phy-reset-gpios (and others). This avoids copying deprecated code into
future DTSes.

Signed-off-by: Krzysztof Kozlowski <[email protected]>

---

Not tested on HW.
---
arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi b/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi
index 602c870a7ccb..404c46671b96 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8mq-sr-som.dtsi
@@ -20,8 +20,6 @@
pinctrl-0 = <&pinctrl_fec1>;
phy-mode = "rgmii-id";
phy-handle = <&ethphy0>;
- phy-reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
- phy-reset-duration = <2>;
fsl,magic-packet;
status = "okay";

@@ -32,6 +30,8 @@
ethphy0: ethernet-phy@4 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <4>;
+ reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <2000>;
};
};
};
--
2.17.1

2020-08-23 12:33:52

by Krzysztof Kozlowski

Subject: [PATCH 2/5] arm64: dts: imx8mq-evk: Replace deprecated phy reset properties

Use preferred properties of phy node instead of deprecated
phy-reset-gpios (and others). This avoids copying deprecated code into
future DTSes.

Signed-off-by: Krzysztof Kozlowski <[email protected]>

---

Not tested on HW.
---
arch/arm64/boot/dts/freescale/imx8mq-evk.dts | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
index c9241abf0df3..8aa9cd8e495a 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-evk.dts
@@ -137,8 +137,6 @@
pinctrl-0 = <&pinctrl_fec1>;
phy-mode = "rgmii-id";
phy-handle = <&ethphy0>;
- phy-reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
- phy-reset-duration = <10>;
fsl,magic-packet;
status = "okay";

@@ -149,6 +147,8 @@
ethphy0: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
+ reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
};
};
};
--
2.17.1

2020-08-23 12:33:52

by Krzysztof Kozlowski

Subject: [PATCH 3/5] arm64: dts: imx8mq-phanbell: Replace deprecated phy reset properties

Use preferred properties of phy node instead of deprecated
phy-reset-gpios (and others). This avoids copying deprecated code into
future DTSes.

Signed-off-by: Krzysztof Kozlowski <[email protected]>

---

Not tested on HW.
---
arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts b/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts
index 77ab568fae67..3f541ddf0768 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-phanbell.dts
@@ -262,9 +262,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec1>;
phy-mode = "rgmii-id";
- phy-reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
- phy-reset-duration = <10>;
- phy-reset-post-delay = <50>;
phy-handle = <&ethphy0>;
fsl,magic-packet;
status = "okay";
@@ -275,6 +272,9 @@
ethphy0: ethernet-phy@0 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <0>;
+ reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
+ reset-assert-us = <10000>;
+ reset-deassert-us = <50000>;
};
};
};
--
2.17.1

2020-08-23 12:34:32

by Krzysztof Kozlowski

Subject: [PATCH 5/5] arm64: dts: imx8mq-thor96: Replace deprecated phy reset properties

Use preferred properties of phy node instead of deprecated
phy-reset-gpios (and others). This avoids copying deprecated code into
future DTSes.

Signed-off-by: Krzysztof Kozlowski <[email protected]>

---

Not tested on HW.
---
arch/arm64/boot/dts/freescale/imx8mq-thor96.dts | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts b/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts
index b4795a032fa2..5d5aa6537225 100644
--- a/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts
+++ b/arch/arm64/boot/dts/freescale/imx8mq-thor96.dts
@@ -122,7 +122,6 @@
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_fec1>;
phy-mode = "rgmii-id";
- phy-reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
phy-handle = <&ethphy>;
fsl,magic-packet;
status = "okay";
@@ -134,6 +133,7 @@
ethphy: ethernet-phy@3 {
compatible = "ethernet-phy-ieee802.3-c22";
reg = <3>;
+ reset-gpios = <&gpio1 9 GPIO_ACTIVE_LOW>;
};
};
};
--
2.17.1

2020-08-30 06:56:02

by Shawn Guo

Subject: Re: [PATCH 1/5] arm64: dts: imx8mm-evk: Replace deprecated phy reset properties

On Sun, Aug 23, 2020 at 01:15:04PM +0200, Krzysztof Kozlowski wrote:
> Use preferred properties of phy node instead of deprecated
> phy-reset-gpios (and others). This avoids copying deprecated code into
> future DTSes.
>
> Signed-off-by: Krzysztof Kozlowski <[email protected]>

Applied all, thanks.