2020-09-01 16:36:04

by Krzysztof Kozlowski

Subject: [PATCH 1/2] serial: 8250: Simplify with dev_err_probe()

Common pattern of handling deferred probe can be simplified with
dev_err_probe(). Less code and the error value gets printed.

Signed-off-by: Krzysztof Kozlowski <[email protected]>
---
drivers/tty/serial/8250/8250_bcm2835aux.c | 12 +++---------
drivers/tty/serial/8250/8250_ingenic.c | 20 ++++++--------------
2 files changed, 9 insertions(+), 23 deletions(-)

diff --git a/drivers/tty/serial/8250/8250_bcm2835aux.c b/drivers/tty/serial/8250/8250_bcm2835aux.c
index 12d03e678295..fd95860cd661 100644
--- a/drivers/tty/serial/8250/8250_bcm2835aux.c
+++ b/drivers/tty/serial/8250/8250_bcm2835aux.c
@@ -110,12 +110,8 @@ static int bcm2835aux_serial_probe(struct platform_device *pdev)

/* get the clock - this also enables the HW */
data->clk = devm_clk_get(&pdev->dev, NULL);
- ret = PTR_ERR_OR_ZERO(data->clk);
- if (ret) {
- if (ret != -EPROBE_DEFER)
- dev_err(&pdev->dev, "could not get clk: %d\n", ret);
- return ret;
- }
+ if (IS_ERR(data->clk))
+ return dev_err_probe(&pdev->dev, PTR_ERR(data->clk), "could not get clk\n");

/* get the interrupt */
ret = platform_get_irq(pdev, 0);
@@ -155,9 +151,7 @@ static int bcm2835aux_serial_probe(struct platform_device *pdev)
/* register the port */
ret = serial8250_register_8250_port(&up);
if (ret < 0) {
- if (ret != -EPROBE_DEFER)
- dev_err(&pdev->dev,
- "unable to register 8250 port - %d\n", ret);
+ dev_err_probe(&pdev->dev, ret, "unable to register 8250 port\n");
goto dis_clk;
}
data->line = ret;
diff --git a/drivers/tty/serial/8250/8250_ingenic.c b/drivers/tty/serial/8250/8250_ingenic.c
index dde766fa465f..988bf6bcce42 100644
--- a/drivers/tty/serial/8250/8250_ingenic.c
+++ b/drivers/tty/serial/8250/8250_ingenic.c
@@ -259,22 +259,14 @@ static int ingenic_uart_probe(struct platform_device *pdev)
return -ENOMEM;

data->clk_module = devm_clk_get(&pdev->dev, "module");
- if (IS_ERR(data->clk_module)) {
- err = PTR_ERR(data->clk_module);
- if (err != -EPROBE_DEFER)
- dev_err(&pdev->dev,
- "unable to get module clock: %d\n", err);
- return err;
- }
+ if (IS_ERR(data->clk_module))
+ return dev_err_probe(&pdev->dev, PTR_ERR(data->clk_module),
+ "unable to get module clock\n");

data->clk_baud = devm_clk_get(&pdev->dev, "baud");
- if (IS_ERR(data->clk_baud)) {
- err = PTR_ERR(data->clk_baud);
- if (err != -EPROBE_DEFER)
- dev_err(&pdev->dev,
- "unable to get baud clock: %d\n", err);
- return err;
- }
+ if (IS_ERR(data->clk_baud))
+ return dev_err_probe(&pdev->dev, PTR_ERR(data->clk_baud),
+ "unable to get baud clock\n");

err = clk_prepare_enable(data->clk_module);
if (err) {
--
2.17.1

2020-09-02 10:09:12

by Lukas Wunner

Subject: Re: [PATCH 1/2] serial: 8250: Simplify with dev_err_probe()

On Tue, Sep 01, 2020 at 05:30:59PM +0200, Krzysztof Kozlowski wrote:
> Common pattern of handling deferred probe can be simplified with
> dev_err_probe(). Less code and the error value gets printed.
>
> Signed-off-by: Krzysztof Kozlowski <[email protected]>

Reviewed-by: Lukas Wunner <[email protected]>