The driver was tested on Xilinx ZynqMP QEMU
For sake of ease of review, only support ZynqMP. Once accepted, then
add support for Versal platform and R5 loading onto OCM.
v2:
- remove domain struct
v3:
- add xilinx-related platform mgmt fn's instead of wrapping around
function pointer in xilinx eemi ops struct
- update zynqmp_r5 yaml parsing to not raise warnings for extra
information in children of R5 node. The warning "node has a unit
name, but no reg or ranges property" will still be raised though
as this particular node is needed to describe the
'#address-cells' and '#size-cells' information.
v4:
- add default values for enums
- fix formatting as per checkpatch.pl --strict. Note that 1 warning and
1 check are still raised as each is due to fixing the warning
results in that particular line going over 80 characters.
- remove warning '/example-0/rpu@ff9a0000/r5@0:
node has a unit name, but no reg or ranges property'
by adding reg to r5 node.
v5:
- update device tree sample and yaml parsing to not raise any warnings
- description for memory-region in yaml parsing
- compatible string in yaml parsing for TCM
- parse_fw change from use of rproc_of_resm_mem_entry_init to
rproc_mem_entry_init and use of alloc/release
- var's of type zynqmp_r5_pdata all have same local variable name
- use dev_dbg instead of dev_info
v6:
- adding memory carveouts is handled much more similarly.
All mem carveouts are now described in reserved memory as needed.
That is, TCM nodes are not coupled to remoteproc anymore.
This is reflected in the remoteproc R5 driver and the device tree
binding.
- remove mailbox from device tree binding as it is not necessary for elf
loading
v7:
- remove unused headers
- zynqmp_r5_remoteproc_probe:lockstep_mode from u32* to u32
- device-tree binding "lockstep-mode" to "xlnx,cluster-mode"
- remove zynqmp_r5_mem_probe and loop to Probe R5 memory devices at
probe()
- remove is_r5_mode_set from zynqmp rpu remote processor private data
- do not error out if no mailbox is provided since mailboxes are optional
- remove zynqmp_r5_remoteproc_probe call of platform_set_drvdata as pdata
is handled in zynqmp_r5_remoteproc_remove
v8:
- remove old acks, reviewed-by's in commit message
v9:
- if zynqmp_r5_remoteproc.c pdata->tx_mc_skbs not initialized, then do not
call skb_queue_empty
- update arguments and documentation for zynqmp_pm_set_rpu_mode
- in fn zynqmp_pm_force_powerdown, change arg 'target' to 'node'
- zynqmp_pm_request_wakeup update code style
- edit 3/5 patch commit message
- document zynqmp_pm_set_tcm_config and zynqmp_pm_get_rpu_mode
documentation to include expected return val
- remove unused fn zynqmp_pm_get_node_status
- update 5/5 patch commit message to document supported configurations
and how they are booted by the driver.
- remove copyrights other than SPDX from zynqmp_r5_remoteproc.c
- compilation warnings no longer raised
- remove unused includes from zynqmp_r5_remoteproc.c
- remove unused var autoboot from zynqmp_r5_remoteproc.c
- reorder zynqmp_r5_pdata fpr small mem savings due to alignment
- zynqmp_pm_set_tcm_config and zynqmp_pm_set_rpu_mode uses second arg
- zynqmp_r5_remoteproc.c use of zynqmp_pm_set_tcm_config now does not
have output arg
- in tcm handling, unconditionally use &= 0x000fffff mask since all nodes
in this fn are for tcm
- update comments for translating dma field in tcm handling to device
address
- update calls to rproc_mem_entry_init in parse_mem_regions so that there
are only 2 cases for types of carveouts instead of 3
- in parse_mem_regions, check if device tree node is null before using it
- add example device tree nodes used in parse_mem_regions and tcm parsing
- add comment for vring id node length
- add check for string length so that vring id is at least min length
- move tcm nodes from reserved mem to instead own device tree nodes
and only use them if enabled in device tree
- add comment for explaining handling of rproc_elf_load_rsc_table
- remove obsolete check for "if (vqid < 0)" in zynqmp_r5_rproc_kick
- remove unused field mems in struct zynqmp_r5_pdata
- remove call to zynqmp_r5_mem_probe and the fn itself as tcm handling
is done by zyqmp_r5_pm_request_tcm
- remove obsolete setting of dma_ops and parent device dma_mask
- remove obsolete use of of_dma_configure
- add comment for call to r5_set_mode fn
- make mbox usage optional and gracefully inform user via dev_dbg if not
present
- change lockstep_mode from u32* to u32
- update zynqmp_pm_set_rpu_mode and zynqmp_pm_set_rpu_mode documentation
and remove unused args
v10:
- add include types.h to xlnx-zynqmp.h for compilation
v11:
- update usage of zynqmp_pm_get_rpu_mode to return rpu mode in enum
- update zynqmp_pm_set_tcm_config and zynqmp_pm_set_rpu_mode arguments to
remove unused args
- use enums instead of u32 where possible in zynqmp_r5_remoteproc
- zynqmp_r5_remoteproc: update prints to not use carriage return, just
newline
- zynqmp_r5_remoteproc: look up tcm banks via property instead of string
name
- print device tree nodes with %pOF instead of %s with node name field
- update tcm release to unmap VA
- handle r5-1 use case
- device tree binding r5 node to have link to TCMs via
meta-memory-regions property
- fix device tree binding so no warnings from 'make dt_binding_check'
v12:
- update signed off by so that latest developer name is last
- in drivers/firmware/zynqmp.c, update zynqmp_pm_set_rpu_mode so rpu_mode
is only set if no error
- update args for zynqmp_pm_set_rpu_mode, zynqmp_pm_set_tcm_config fn
arg's to reflect what is expected in the function and the usage in
zynqmp_r5_remoteproc accordingly
v13:
- zynqmp_pm_get_rpu_mode argument zynqmp_pm_get_rpu_mode is
only set if no error
Ben Levinsky (5):
firmware: xilinx: Add ZynqMP firmware ioctl enums for RPU
configuration.
firmware: xilinx: Add shutdown/wakeup APIs
firmware: xilinx: Add RPU configuration APIs
dt-bindings: remoteproc: Add documentation for ZynqMP R5 rproc
bindings
remoteproc: Add initial zynqmp R5 remoteproc driver
.../xilinx,zynqmp-r5-remoteproc.yaml | 123 +++
drivers/firmware/xilinx/zynqmp.c | 95 ++
drivers/remoteproc/Kconfig | 10 +
drivers/remoteproc/Makefile | 1 +
drivers/remoteproc/zynqmp_r5_remoteproc.c | 898 ++++++++++++++++++
include/linux/firmware/xlnx-zynqmp.h | 60 ++
6 files changed, 1187 insertions(+)
create mode 100644 Documentation/devicetree/bindings/remoteproc/xilinx,zynqmp-r5-remoteproc.yaml
create mode 100644 drivers/remoteproc/zynqmp_r5_remoteproc.c
--
2.17.1
Add shutdown/wakeup a resource eemi operations to shutdown
or bringup a resource.
Note alignment of args matches convention of other fn's in this file.
The reason being that the long fn name results in aligned args that
otherwise go over 80 chars so shift right to avoid this
Signed-off-by: Ben Levinsky <[email protected]>
---
v3:
- add xilinx-related platform mgmt fn's instead of wrapping around
function pointer in xilinx eemi ops struct
- fix formatting
v4:
- add default values for enumv3:
- add xilinx-related platform mgmt fn's instead of wrapping around
function pointer in xilinx eemi ops struct
- fix formatting
v4:
- add default values for enum
v9:
- zynqmp_pm_force_powerdown update arg 'target' to 'node'
- zynqmp_pm_request_wakeup fix code style
v10:
- add types.h to includes for compilation
---
drivers/firmware/xilinx/zynqmp.c | 35 ++++++++++++++++++++++++++++
include/linux/firmware/xlnx-zynqmp.h | 23 ++++++++++++++++++
2 files changed, 58 insertions(+)
diff --git a/drivers/firmware/xilinx/zynqmp.c b/drivers/firmware/xilinx/zynqmp.c
index 8d1ff2454e2e..a966ee956573 100644
--- a/drivers/firmware/xilinx/zynqmp.c
+++ b/drivers/firmware/xilinx/zynqmp.c
@@ -846,6 +846,41 @@ int zynqmp_pm_release_node(const u32 node)
}
EXPORT_SYMBOL_GPL(zynqmp_pm_release_node);
+/**
+ * zynqmp_pm_force_pwrdwn - PM call to request for another PU or subsystem to
+ * be powered down forcefully
+ * @node: Node ID of the targeted PU or subsystem
+ * @ack: Flag to specify whether acknowledge is requested
+ *
+ * Return: status, either success or error+reason
+ */
+int zynqmp_pm_force_pwrdwn(const u32 node,
+ const enum zynqmp_pm_request_ack ack)
+{
+ return zynqmp_pm_invoke_fn(PM_FORCE_POWERDOWN, node, ack, 0, 0, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_force_pwrdwn);
+
+/**
+ * zynqmp_pm_request_wake - PM call to wake up selected master or subsystem
+ * @node: Node ID of the master or subsystem
+ * @set_addr: Specifies whether the address argument is relevant
+ * @address: Address from which to resume when woken up
+ * @ack: Flag to specify whether acknowledge requested
+ *
+ * Return: status, either success or error+reason
+ */
+int zynqmp_pm_request_wake(const u32 node,
+ const bool set_addr,
+ const u64 address,
+ const enum zynqmp_pm_request_ack ack)
+{
+ /* set_addr flag is encoded into 1st bit of address */
+ return zynqmp_pm_invoke_fn(PM_REQUEST_WAKEUP, node, address | set_addr,
+ address >> 32, ack, NULL);
+}
+EXPORT_SYMBOL_GPL(zynqmp_pm_request_wake);
+
/**
* zynqmp_pm_set_requirement() - PM call to set requirement for PM slaves
* @node: Node ID of the slave
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index bb347dfe4ba4..6241c5ac51b3 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -12,6 +12,7 @@
#ifndef __FIRMWARE_ZYNQMP_H__
#define __FIRMWARE_ZYNQMP_H__
+#include <linux/types.h>
#define ZYNQMP_PM_VERSION_MAJOR 1
#define ZYNQMP_PM_VERSION_MINOR 0
@@ -64,6 +65,8 @@
enum pm_api_id {
PM_GET_API_VERSION = 1,
+ PM_FORCE_POWERDOWN = 8,
+ PM_REQUEST_WAKEUP = 10,
PM_SYSTEM_SHUTDOWN = 12,
PM_REQUEST_NODE = 13,
PM_RELEASE_NODE,
@@ -376,6 +379,12 @@ int zynqmp_pm_write_pggs(u32 index, u32 value);
int zynqmp_pm_read_pggs(u32 index, u32 *value);
int zynqmp_pm_system_shutdown(const u32 type, const u32 subtype);
int zynqmp_pm_set_boot_health_status(u32 value);
+int zynqmp_pm_force_pwrdwn(const u32 target,
+ const enum zynqmp_pm_request_ack ack);
+int zynqmp_pm_request_wake(const u32 node,
+ const bool set_addr,
+ const u64 address,
+ const enum zynqmp_pm_request_ack ack);
#else
static inline struct zynqmp_eemi_ops *zynqmp_pm_get_eemi_ops(void)
{
@@ -526,6 +535,20 @@ static inline int zynqmp_pm_set_boot_health_status(u32 value)
{
return -ENODEV;
}
+
+static inline int zynqmp_pm_force_pwrdwn(const u32 target,
+ const enum zynqmp_pm_request_ack ack)
+{
+ return -ENODEV;
+}
+
+static inline int zynqmp_pm_request_wake(const u32 node,
+ const bool set_addr,
+ const u64 address,
+ const enum zynqmp_pm_request_ack ack)
+{
+ return -ENODEV;
+}
#endif
#endif /* __FIRMWARE_ZYNQMP_H__ */
--
2.17.1
Add ZynqMP firmware ioctl enums for RPU configuration.
Signed-off-by: Ben Levinsky <[email protected]>
---
v3:
- add xilinx-related platform mgmt fn's instead of wrapping around
function pointer in xilinx eemi ops struct
v4:
- add default values for enums
---
include/linux/firmware/xlnx-zynqmp.h | 19 +++++++++++++++++++
1 file changed, 19 insertions(+)
diff --git a/include/linux/firmware/xlnx-zynqmp.h b/include/linux/firmware/xlnx-zynqmp.h
index 5968df82b991..bb347dfe4ba4 100644
--- a/include/linux/firmware/xlnx-zynqmp.h
+++ b/include/linux/firmware/xlnx-zynqmp.h
@@ -104,6 +104,10 @@ enum pm_ret_status {
};
enum pm_ioctl_id {
+ IOCTL_GET_RPU_OPER_MODE = 0,
+ IOCTL_SET_RPU_OPER_MODE = 1,
+ IOCTL_RPU_BOOT_ADDR_CONFIG = 2,
+ IOCTL_TCM_COMB_CONFIG = 3,
IOCTL_SD_DLL_RESET = 6,
IOCTL_SET_SD_TAPDELAY,
IOCTL_SET_PLL_FRAC_MODE,
@@ -129,6 +133,21 @@ enum pm_query_id {
PM_QID_CLOCK_GET_MAX_DIVISOR,
};
+enum rpu_oper_mode {
+ PM_RPU_MODE_LOCKSTEP = 0,
+ PM_RPU_MODE_SPLIT = 1,
+};
+
+enum rpu_boot_mem {
+ PM_RPU_BOOTMEM_LOVEC = 0,
+ PM_RPU_BOOTMEM_HIVEC = 1,
+};
+
+enum rpu_tcm_comb {
+ PM_RPU_TCM_SPLIT = 0,
+ PM_RPU_TCM_COMB = 1,
+};
+
enum zynqmp_pm_reset_action {
PM_RESET_ACTION_RELEASE,
PM_RESET_ACTION_ASSERT,
--
2.17.1