Hi All,
This patch series fixes DVP support and enables BT656 mode in
the driver.
Cheers,
Prabhakar
Changes for v4:
* Split patch 1/3 from v3 patch series [1] more granular as
requested by Sakari
* Included [Tested/Reviewed]-by tag from Jacopo
[1] https://patchwork.kernel.org/cover/11712735/
Changes for v3 (https://patchwork.kernel.org/cover/11712735/):
* Dropped DT binding patch
* Fail probe if unsupported bus_type is passed
* Fixed review comments pointed by Jacopo
Changes for v2 (https://lkml.org/lkml/2020/8/3/830):
* Added support to fallback in parallel mode
* Documented bus-type property
* Added descriptive commit message for patch 2/4 as pointed
by Sakari
* Fixed review comments pointed by Laurent to have separate functions
for mipi and dvp setup
* Made sure the sensor is in power down mode during startup too for
DVP mode
Lad Prabhakar (6):
media: i2c: ov5640: Remain in power down for DVP mode unless streaming
media: i2c: ov5640: Separate out mipi configuration from s_power
media: i2c: ov5640: Enable data pins on poweron for DVP mode
media: i2c: ov5640: Configure HVP lines in s_power callback
media: i2c: ov5640: Add support for BT656 mode
media: i2c: ov5640: Fail probe on unsupported bus_type
drivers/media/i2c/ov5640.c | 336 +++++++++++++++++++++----------------
1 file changed, 191 insertions(+), 145 deletions(-)
--
2.17.1