If usb-role-switch is present in the device tree, it means that ID and Vbus
signals are not connected to the OTG controller but to an external
component (GPIOs, Type-C controller). In this configuration, usb role
switch is used to force valid sessions on STM32MP15 SoCs.
Acked-by: Martin Blumenstingl <[email protected]>
Signed-off-by: Amelie Delaunay <[email protected]>
---
drivers/usb/dwc2/params.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/usb/dwc2/params.c b/drivers/usb/dwc2/params.c
index a3611cdd1dea..50df72f32b4c 100644
--- a/drivers/usb/dwc2/params.c
+++ b/drivers/usb/dwc2/params.c
@@ -185,7 +185,7 @@ static void dwc2_set_stm32mp15_hsotg_params(struct dwc2_hsotg *hsotg)
struct dwc2_core_params *p = &hsotg->params;
p->otg_cap = DWC2_CAP_PARAM_NO_HNP_SRP_CAPABLE;
- p->activate_stm_id_vb_detection = true;
+ p->activate_stm_id_vb_detection = !device_property_read_bool(hsotg->dev, "usb-role-switch");
p->host_rx_fifo_size = 440;
p->host_nperio_tx_fifo_size = 256;
p->host_perio_tx_fifo_size = 256;
--
2.17.1