2020-09-09 20:32:58

by Eddie James

Subject: [PATCH v3 4/5] ARM: dts: Aspeed: Tacoma: Add IBM Operation Panel I2C device

Set I2C bus 0 to multi-master mode and add the panel device that will
register as a slave.

Signed-off-by: Eddie James <[email protected]>
Reviewed-by: Joel Stanley <[email protected]>
---
arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts | 7 +++++++
1 file changed, 7 insertions(+)

diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
index 5f4ee67ac787..4d070d6ba09f 100644
--- a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
+++ b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
@@ -4,6 +4,7 @@

#include "aspeed-g6.dtsi"
#include <dt-bindings/gpio/aspeed-gpio.h>
+#include <dt-bindings/i2c/i2c.h>
#include <dt-bindings/leds/leds-pca955x.h>

/ {
@@ -438,7 +439,13 @@ aliases {
};

&i2c0 {
+ multi-master;
status = "okay";
+
+ ibm-panel@62 {
+ compatible = "ibm,op-panel";
+ reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
+ };
};

&i2c1 {
--
2.26.2

2020-09-10 02:47:26

by Joel Stanley

Subject: Re: [PATCH v3 4/5] ARM: dts: Aspeed: Tacoma: Add IBM Operation Panel I2C device

On Wed, 9 Sep 2020 at 20:31, Eddie James <[email protected]> wrote:
>
> Set I2C bus 0 to multi-master mode and add the panel device that will
> register as a slave.
>
> Signed-off-by: Eddie James <[email protected]>
> Reviewed-by: Joel Stanley <[email protected]>

Applied to the aspeed tree for v5.10.

Cheers,

Joel

> ---
> arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts | 7 +++++++
> 1 file changed, 7 insertions(+)
>
> diff --git a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
> index 5f4ee67ac787..4d070d6ba09f 100644
> --- a/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
> +++ b/arch/arm/boot/dts/aspeed-bmc-opp-tacoma.dts
> @@ -4,6 +4,7 @@
>
> #include "aspeed-g6.dtsi"
> #include <dt-bindings/gpio/aspeed-gpio.h>
> +#include <dt-bindings/i2c/i2c.h>
> #include <dt-bindings/leds/leds-pca955x.h>
>
> / {
> @@ -438,7 +439,13 @@ aliases {
> };
>
> &i2c0 {
> + multi-master;
> status = "okay";
> +
> + ibm-panel@62 {
> + compatible = "ibm,op-panel";
> + reg = <(0x62 | I2C_OWN_SLAVE_ADDRESS)>;
> + };
> };
>
> &i2c1 {
> --
> 2.26.2
>