On Thu, Sep 10, 2020 at 11:53 AM Laurentiu Palcu
<[email protected]> wrote:
>
> When compiling for 32bit platforms, the compilation fails with:
>
> ERROR: modpost: "__aeabi_ldivmod"
> [drivers/gpu/drm/imx/dcss/imx-dcss.ko] undefined!
> ERROR: modpost: "__aeabi_uldivmod"
> [drivers/gpu/drm/imx/dcss/imx-dcss.ko] undefined!
>
> This patch adds a dependency on ARM64 since no 32bit SoCs have DCSS, so far.
Usual way to fix this correctly is using the right division macros,
not limiting the driver to 64bit. But this works for now, would be
good to fix this properly for compile-testing and all that.
> Signed-off-by: Laurentiu Palcu <[email protected]>
> Reported-by: Daniel Vetter <[email protected]>
Reviewed-by: Daniel Vetter <[email protected]>
Please push to drm-misc-next.
-Daniel
---
> drivers/gpu/drm/imx/dcss/Kconfig | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/gpu/drm/imx/dcss/Kconfig b/drivers/gpu/drm/imx/dcss/Kconfig
> index 69860de8861f..2b17a964ff05 100644
> --- a/drivers/gpu/drm/imx/dcss/Kconfig
> +++ b/drivers/gpu/drm/imx/dcss/Kconfig
> @@ -3,7 +3,7 @@ config DRM_IMX_DCSS
> select IMX_IRQSTEER
> select DRM_KMS_CMA_HELPER
> select VIDEOMODE_HELPERS
> - depends on DRM && ARCH_MXC
> + depends on DRM && ARCH_MXC && ARM64
> help
> Choose this if you have a NXP i.MX8MQ based system and want to use the
> Display Controller Subsystem. This option enables DCSS support.
> --
> 2.17.1
>
--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch
On Thu, Sep 10, 2020 at 11:57:10AM +0200, Daniel Vetter wrote:
> On Thu, Sep 10, 2020 at 11:53 AM Laurentiu Palcu
> <[email protected]> wrote:
> >
> > When compiling for 32bit platforms, the compilation fails with:
> >
> > ERROR: modpost: "__aeabi_ldivmod"
> > [drivers/gpu/drm/imx/dcss/imx-dcss.ko] undefined!
> > ERROR: modpost: "__aeabi_uldivmod"
> > [drivers/gpu/drm/imx/dcss/imx-dcss.ko] undefined!
> >
> > This patch adds a dependency on ARM64 since no 32bit SoCs have DCSS, so far.
>
> Usual way to fix this correctly is using the right division macros,
> not limiting the driver to 64bit. But this works for now, would be
> good to fix this properly for compile-testing and all that.
I didn't see the point in using the macros since this is running only on
64bit. Though I will probably revisit it and fix it properly in a
subsequent patch.
>
> > Signed-off-by: Laurentiu Palcu <[email protected]>
> > Reported-by: Daniel Vetter <[email protected]>
>
> Reviewed-by: Daniel Vetter <[email protected]>
>
> Please push to drm-misc-next.
About that, I may need some help pushing it. Apparently, my request for
a legacy SSH account for contributing to drm-misc got stalled:
https://gitlab.freedesktop.org/freedesktop/freedesktop/-/issues/289
Thanks,
laurentiu
> -Daniel
>
>
>
> ---
> > drivers/gpu/drm/imx/dcss/Kconfig | 2 +-
> > 1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/gpu/drm/imx/dcss/Kconfig b/drivers/gpu/drm/imx/dcss/Kconfig
> > index 69860de8861f..2b17a964ff05 100644
> > --- a/drivers/gpu/drm/imx/dcss/Kconfig
> > +++ b/drivers/gpu/drm/imx/dcss/Kconfig
> > @@ -3,7 +3,7 @@ config DRM_IMX_DCSS
> > select IMX_IRQSTEER
> > select DRM_KMS_CMA_HELPER
> > select VIDEOMODE_HELPERS
> > - depends on DRM && ARCH_MXC
> > + depends on DRM && ARCH_MXC && ARM64
> > help
> > Choose this if you have a NXP i.MX8MQ based system and want to use the
> > Display Controller Subsystem. This option enables DCSS support.
> > --
> > 2.17.1
> >
>
>
> --
> Daniel Vetter
> Software Engineer, Intel Corporation
> http://blog.ffwll.ch
On Do, 2020-09-10 at 13:21 +0300, Laurentiu Palcu wrote:
> On Thu, Sep 10, 2020 at 11:57:10AM +0200, Daniel Vetter wrote:
> > On Thu, Sep 10, 2020 at 11:53 AM Laurentiu Palcu
> > <[email protected]> wrote:
> > > When compiling for 32bit platforms, the compilation fails with:
> > >
> > > ERROR: modpost: "__aeabi_ldivmod"
> > > [drivers/gpu/drm/imx/dcss/imx-dcss.ko] undefined!
> > > ERROR: modpost: "__aeabi_uldivmod"
> > > [drivers/gpu/drm/imx/dcss/imx-dcss.ko] undefined!
> > >
> > > This patch adds a dependency on ARM64 since no 32bit SoCs have DCSS, so far.
> >
> > Usual way to fix this correctly is using the right division macros,
> > not limiting the driver to 64bit. But this works for now, would be
> > good to fix this properly for compile-testing and all that.
>
> I didn't see the point in using the macros since this is running only on
> 64bit. Though I will probably revisit it and fix it properly in a
> subsequent patch.
>
> > > Signed-off-by: Laurentiu Palcu <[email protected]>
> > > Reported-by: Daniel Vetter <[email protected]>
> >
> > Reviewed-by: Daniel Vetter <[email protected]>
> >
> > Please push to drm-misc-next.
>
> About that, I may need some help pushing it.
I've already pushed a few minutes ago, so we don't disturb the build
tests any longer.
Regards,
Lucas
> Apparently, my request for
> a legacy SSH account for contributing to drm-misc got stalled:
>
> https://gitlab.freedesktop.org/freedesktop/freedesktop/-/issues/289
>
> Thanks,
> laurentiu
>
> > -Daniel
> >
> >
> >
> > ---
> > > drivers/gpu/drm/imx/dcss/Kconfig | 2 +-
> > > 1 file changed, 1 insertion(+), 1 deletion(-)
> > >
> > > diff --git a/drivers/gpu/drm/imx/dcss/Kconfig b/drivers/gpu/drm/imx/dcss/Kconfig
> > > index 69860de8861f..2b17a964ff05 100644
> > > --- a/drivers/gpu/drm/imx/dcss/Kconfig
> > > +++ b/drivers/gpu/drm/imx/dcss/Kconfig
> > > @@ -3,7 +3,7 @@ config DRM_IMX_DCSS
> > > select IMX_IRQSTEER
> > > select DRM_KMS_CMA_HELPER
> > > select VIDEOMODE_HELPERS
> > > - depends on DRM && ARCH_MXC
> > > + depends on DRM && ARCH_MXC && ARM64
> > > help
> > > Choose this if you have a NXP i.MX8MQ based system and want to use the
> > > Display Controller Subsystem. This option enables DCSS support.
> > > --
> > > 2.17.1
> > >
> >
> > --
> > Daniel Vetter
> > Software Engineer, Intel Corporation
> > http://blog.ffwll.ch
Hi Lucas,
On Thu, Sep 10, 2020 at 12:24:44PM +0200, Lucas Stach wrote:
> On Do, 2020-09-10 at 13:21 +0300, Laurentiu Palcu wrote:
> > On Thu, Sep 10, 2020 at 11:57:10AM +0200, Daniel Vetter wrote:
> > > On Thu, Sep 10, 2020 at 11:53 AM Laurentiu Palcu
> > > <[email protected]> wrote:
> > > > When compiling for 32bit platforms, the compilation fails with:
> > > >
> > > > ERROR: modpost: "__aeabi_ldivmod"
> > > > [drivers/gpu/drm/imx/dcss/imx-dcss.ko] undefined!
> > > > ERROR: modpost: "__aeabi_uldivmod"
> > > > [drivers/gpu/drm/imx/dcss/imx-dcss.ko] undefined!
> > > >
> > > > This patch adds a dependency on ARM64 since no 32bit SoCs have DCSS, so far.
> > >
> > > Usual way to fix this correctly is using the right division macros,
> > > not limiting the driver to 64bit. But this works for now, would be
> > > good to fix this properly for compile-testing and all that.
> >
> > I didn't see the point in using the macros since this is running only on
> > 64bit. Though I will probably revisit it and fix it properly in a
> > subsequent patch.
> >
> > > > Signed-off-by: Laurentiu Palcu <[email protected]>
> > > > Reported-by: Daniel Vetter <[email protected]>
> > >
> > > Reviewed-by: Daniel Vetter <[email protected]>
> > >
> > > Please push to drm-misc-next.
> >
> > About that, I may need some help pushing it.
>
> I've already pushed a few minutes ago, so we don't disturb the build
> tests any longer.
Thanks a lot,
laurentiu
>
> Regards,
> Lucas
>
> > Apparently, my request for
> > a legacy SSH account for contributing to drm-misc got stalled:
> >
> > https://gitlab.freedesktop.org/freedesktop/freedesktop/-/issues/289
> >
> > Thanks,
> > laurentiu
> >
> > > -Daniel
> > >
> > >
> > >
> > > ---
> > > > drivers/gpu/drm/imx/dcss/Kconfig | 2 +-
> > > > 1 file changed, 1 insertion(+), 1 deletion(-)
> > > >
> > > > diff --git a/drivers/gpu/drm/imx/dcss/Kconfig b/drivers/gpu/drm/imx/dcss/Kconfig
> > > > index 69860de8861f..2b17a964ff05 100644
> > > > --- a/drivers/gpu/drm/imx/dcss/Kconfig
> > > > +++ b/drivers/gpu/drm/imx/dcss/Kconfig
> > > > @@ -3,7 +3,7 @@ config DRM_IMX_DCSS
> > > > select IMX_IRQSTEER
> > > > select DRM_KMS_CMA_HELPER
> > > > select VIDEOMODE_HELPERS
> > > > - depends on DRM && ARCH_MXC
> > > > + depends on DRM && ARCH_MXC && ARM64
> > > > help
> > > > Choose this if you have a NXP i.MX8MQ based system and want to use the
> > > > Display Controller Subsystem. This option enables DCSS support.
> > > > --
> > > > 2.17.1
> > > >
> > >
> > > --
> > > Daniel Vetter
> > > Software Engineer, Intel Corporation
> > > http://blog.ffwll.ch
>