From: AKASHI Takahiro <[email protected]>
VDD2 is used for powering UHS-II interface.
Modify sdhci_set_power_and_bus_voltage(), sdhci_set_power_noreg()
and sdhci_set_power_noreg() to handle VDD2.
Signed-off-by: Ben Chuang <[email protected]>
Signed-off-by: AKASHI Takahiro <[email protected]>
---
drivers/mmc/host/sdhci-omap.c | 2 +-
drivers/mmc/host/sdhci-pci-core.c | 4 +--
drivers/mmc/host/sdhci-pxav3.c | 4 +--
drivers/mmc/host/sdhci-xenon.c | 4 +--
drivers/mmc/host/sdhci.c | 42 ++++++++++++++++++++++++-------
drivers/mmc/host/sdhci.h | 9 +++----
6 files changed, 43 insertions(+), 22 deletions(-)
diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
index 1ec74c2d5c17..1926585debe5 100644
--- a/drivers/mmc/host/sdhci-omap.c
+++ b/drivers/mmc/host/sdhci-omap.c
@@ -678,7 +678,7 @@ static void sdhci_omap_set_clock(struct sdhci_host *host, unsigned int clock)
}
static void sdhci_omap_set_power(struct sdhci_host *host, unsigned char mode,
- unsigned short vdd)
+ unsigned short vdd, unsigned short vdd2)
{
struct mmc_host *mmc = host->mmc;
diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c
index bb6802448b2f..40f5a24a8982 100644
--- a/drivers/mmc/host/sdhci-pci-core.c
+++ b/drivers/mmc/host/sdhci-pci-core.c
@@ -629,12 +629,12 @@ static int bxt_get_cd(struct mmc_host *mmc)
#define SDHCI_INTEL_PWR_TIMEOUT_UDELAY 100
static void sdhci_intel_set_power(struct sdhci_host *host, unsigned char mode,
- unsigned short vdd)
+ unsigned short vdd, unsigned short vdd2)
{
int cntr;
u8 reg;
- sdhci_set_power(host, mode, vdd);
+ sdhci_set_power(host, mode, vdd, -1);
if (mode == MMC_POWER_OFF)
return;
diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
index e55037ceda73..457e9425339a 100644
--- a/drivers/mmc/host/sdhci-pxav3.c
+++ b/drivers/mmc/host/sdhci-pxav3.c
@@ -298,12 +298,12 @@ static void pxav3_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs)
}
static void pxav3_set_power(struct sdhci_host *host, unsigned char mode,
- unsigned short vdd)
+ unsigned short vdd, unsigned short vdd2)
{
struct mmc_host *mmc = host->mmc;
u8 pwr = host->pwr;
- sdhci_set_power_noreg(host, mode, vdd);
+ sdhci_set_power_noreg(host, mode, vdd, -1);
if (host->pwr == pwr)
return;
diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c
index 4703cd540c7f..2b0ebb91895a 100644
--- a/drivers/mmc/host/sdhci-xenon.c
+++ b/drivers/mmc/host/sdhci-xenon.c
@@ -214,12 +214,12 @@ static void xenon_set_uhs_signaling(struct sdhci_host *host,
}
static void xenon_set_power(struct sdhci_host *host, unsigned char mode,
- unsigned short vdd)
+ unsigned short vdd, unsigned short vdd2)
{
struct mmc_host *mmc = host->mmc;
u8 pwr = host->pwr;
- sdhci_set_power_noreg(host, mode, vdd);
+ sdhci_set_power_noreg(host, mode, vdd, -1);
if (host->pwr == pwr)
return;
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index d38d734ec83f..ca3d4a506e01 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -2089,12 +2089,15 @@ void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
EXPORT_SYMBOL_GPL(sdhci_set_clock);
static void sdhci_set_power_reg(struct sdhci_host *host, unsigned char mode,
- unsigned short vdd)
+ unsigned short vdd, unsigned short vdd2)
{
struct mmc_host *mmc = host->mmc;
mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
+ if (mmc->caps & MMC_CAP_UHS2 && !IS_ERR(mmc->supply.vmmc2))
+ mmc_regulator_set_ocr(mmc, mmc->supply.vmmc2, vdd2);
+
if (mode != MMC_POWER_OFF)
sdhci_writeb(host, SDHCI_POWER_ON, SDHCI_POWER_CONTROL);
else
@@ -2102,7 +2105,7 @@ static void sdhci_set_power_reg(struct sdhci_host *host, unsigned char mode,
}
void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
- unsigned short vdd)
+ unsigned short vdd, unsigned short vdd2)
{
u8 pwr = 0;
@@ -2133,6 +2136,20 @@ void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
}
}
+ if (mode != MMC_POWER_OFF) {
+ if (vdd2 != (unsigned short)-1) {
+ switch (1 << vdd2) {
+ case MMC_VDD2_165_195:
+ pwr |= SDHCI_VDD2_POWER_180;
+ break;
+ default:
+ WARN(1, "%s: Invalid vdd2 %#x\n",
+ mmc_hostname(host->mmc), vdd2);
+ break;
+ }
+ }
+ }
+
if (host->pwr == pwr)
return;
@@ -2159,7 +2176,13 @@ void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
pwr |= SDHCI_POWER_ON;
+ if (vdd2 != (unsigned short)-1)
+ pwr |= SDHCI_VDD2_POWER_ON;
+
+ sdhci_writeb(host, pwr & 0xf, SDHCI_POWER_CONTROL);
+ mdelay(5);
sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
+ mdelay(5);
if (host->quirks2 & SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON)
sdhci_runtime_pm_bus_on(host);
@@ -2175,12 +2198,12 @@ void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
EXPORT_SYMBOL_GPL(sdhci_set_power_noreg);
void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
- unsigned short vdd)
+ unsigned short vdd, unsigned short vdd2)
{
if (IS_ERR(host->mmc->supply.vmmc))
- sdhci_set_power_noreg(host, mode, vdd);
+ sdhci_set_power_noreg(host, mode, vdd, vdd2);
else
- sdhci_set_power_reg(host, mode, vdd);
+ sdhci_set_power_reg(host, mode, vdd, vdd2);
}
EXPORT_SYMBOL_GPL(sdhci_set_power);
@@ -2192,14 +2215,15 @@ EXPORT_SYMBOL_GPL(sdhci_set_power);
*/
void sdhci_set_power_and_bus_voltage(struct sdhci_host *host,
unsigned char mode,
- unsigned short vdd)
+ unsigned short vdd,
+ unsigned short vdd2)
{
if (!IS_ERR(host->mmc->supply.vmmc)) {
struct mmc_host *mmc = host->mmc;
mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
}
- sdhci_set_power_noreg(host, mode, vdd);
+ sdhci_set_power_noreg(host, mode, vdd, -1);
}
EXPORT_SYMBOL_GPL(sdhci_set_power_and_bus_voltage);
@@ -2377,9 +2401,9 @@ void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
}
if (host->ops->set_power)
- host->ops->set_power(host, ios->power_mode, ios->vdd);
+ host->ops->set_power(host, ios->power_mode, ios->vdd, -1);
else
- sdhci_set_power(host, ios->power_mode, ios->vdd);
+ sdhci_set_power(host, ios->power_mode, ios->vdd, -1);
/* 4.0 host support */
if (host->version >= SDHCI_SPEC_400) {
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index ecf55394ea46..f6732f33f29f 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -689,7 +689,7 @@ struct sdhci_ops {
void (*set_clock)(struct sdhci_host *host, unsigned int clock);
void (*set_power)(struct sdhci_host *host, unsigned char mode,
- unsigned short vdd);
+ unsigned short vdd, unsigned short vdd2);
u32 (*irq)(struct sdhci_host *host, u32 intmask);
@@ -852,13 +852,10 @@ u16 sdhci_calc_clk(struct sdhci_host *host, unsigned int clock,
unsigned int *actual_clock);
void sdhci_set_clock(struct sdhci_host *host, unsigned int clock);
void sdhci_enable_clk(struct sdhci_host *host, u16 clk);
-void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
- unsigned short vdd);
void sdhci_set_power_and_bus_voltage(struct sdhci_host *host,
unsigned char mode,
- unsigned short vdd);
-void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
- unsigned short vdd);
+ unsigned short vdd,
+ unsigned short vdd2);
void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq);
int sdhci_request_atomic(struct mmc_host *mmc, struct mmc_request *mrq);
void sdhci_set_bus_width(struct sdhci_host *host, int width);
--
2.27.0
On 10/07/20 2:11 pm, Ben Chuang wrote:
> From: AKASHI Takahiro <[email protected]>
>
> VDD2 is used for powering UHS-II interface.
> Modify sdhci_set_power_and_bus_voltage(), sdhci_set_power_noreg()
> and sdhci_set_power_noreg() to handle VDD2.
vdd2 is always 1.8 V and I suspect there may never be support for anything
else, so we should start with 1.8 V only.
Also can we create uhs2_set_power_reg() and uhs2_set_power_noreg() and use
the existing ->set_power() callback
>
> Signed-off-by: Ben Chuang <[email protected]>
> Signed-off-by: AKASHI Takahiro <[email protected]>
> ---
> drivers/mmc/host/sdhci-omap.c | 2 +-
> drivers/mmc/host/sdhci-pci-core.c | 4 +--
> drivers/mmc/host/sdhci-pxav3.c | 4 +--
> drivers/mmc/host/sdhci-xenon.c | 4 +--
> drivers/mmc/host/sdhci.c | 42 ++++++++++++++++++++++++-------
> drivers/mmc/host/sdhci.h | 9 +++----
> 6 files changed, 43 insertions(+), 22 deletions(-)
>
> diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
> index 1ec74c2d5c17..1926585debe5 100644
> --- a/drivers/mmc/host/sdhci-omap.c
> +++ b/drivers/mmc/host/sdhci-omap.c
> @@ -678,7 +678,7 @@ static void sdhci_omap_set_clock(struct sdhci_host *host, unsigned int clock)
> }
>
> static void sdhci_omap_set_power(struct sdhci_host *host, unsigned char mode,
> - unsigned short vdd)
> + unsigned short vdd, unsigned short vdd2)
> {
> struct mmc_host *mmc = host->mmc;
>
> diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c
> index bb6802448b2f..40f5a24a8982 100644
> --- a/drivers/mmc/host/sdhci-pci-core.c
> +++ b/drivers/mmc/host/sdhci-pci-core.c
> @@ -629,12 +629,12 @@ static int bxt_get_cd(struct mmc_host *mmc)
> #define SDHCI_INTEL_PWR_TIMEOUT_UDELAY 100
>
> static void sdhci_intel_set_power(struct sdhci_host *host, unsigned char mode,
> - unsigned short vdd)
> + unsigned short vdd, unsigned short vdd2)
> {
> int cntr;
> u8 reg;
>
> - sdhci_set_power(host, mode, vdd);
> + sdhci_set_power(host, mode, vdd, -1);
>
> if (mode == MMC_POWER_OFF)
> return;
> diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
> index e55037ceda73..457e9425339a 100644
> --- a/drivers/mmc/host/sdhci-pxav3.c
> +++ b/drivers/mmc/host/sdhci-pxav3.c
> @@ -298,12 +298,12 @@ static void pxav3_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs)
> }
>
> static void pxav3_set_power(struct sdhci_host *host, unsigned char mode,
> - unsigned short vdd)
> + unsigned short vdd, unsigned short vdd2)
> {
> struct mmc_host *mmc = host->mmc;
> u8 pwr = host->pwr;
>
> - sdhci_set_power_noreg(host, mode, vdd);
> + sdhci_set_power_noreg(host, mode, vdd, -1);
>
> if (host->pwr == pwr)
> return;
> diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c
> index 4703cd540c7f..2b0ebb91895a 100644
> --- a/drivers/mmc/host/sdhci-xenon.c
> +++ b/drivers/mmc/host/sdhci-xenon.c
> @@ -214,12 +214,12 @@ static void xenon_set_uhs_signaling(struct sdhci_host *host,
> }
>
> static void xenon_set_power(struct sdhci_host *host, unsigned char mode,
> - unsigned short vdd)
> + unsigned short vdd, unsigned short vdd2)
> {
> struct mmc_host *mmc = host->mmc;
> u8 pwr = host->pwr;
>
> - sdhci_set_power_noreg(host, mode, vdd);
> + sdhci_set_power_noreg(host, mode, vdd, -1);
>
> if (host->pwr == pwr)
> return;
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index d38d734ec83f..ca3d4a506e01 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -2089,12 +2089,15 @@ void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
> EXPORT_SYMBOL_GPL(sdhci_set_clock);
>
> static void sdhci_set_power_reg(struct sdhci_host *host, unsigned char mode,
> - unsigned short vdd)
> + unsigned short vdd, unsigned short vdd2)
> {
> struct mmc_host *mmc = host->mmc;
>
> mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
>
> + if (mmc->caps & MMC_CAP_UHS2 && !IS_ERR(mmc->supply.vmmc2))
> + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc2, vdd2);
> +
> if (mode != MMC_POWER_OFF)
> sdhci_writeb(host, SDHCI_POWER_ON, SDHCI_POWER_CONTROL);
> else
> @@ -2102,7 +2105,7 @@ static void sdhci_set_power_reg(struct sdhci_host *host, unsigned char mode,
> }
>
> void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
> - unsigned short vdd)
> + unsigned short vdd, unsigned short vdd2)
> {
> u8 pwr = 0;
>
> @@ -2133,6 +2136,20 @@ void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
> }
> }
>
> + if (mode != MMC_POWER_OFF) {
> + if (vdd2 != (unsigned short)-1) {
> + switch (1 << vdd2) {
> + case MMC_VDD2_165_195:
> + pwr |= SDHCI_VDD2_POWER_180;
> + break;
> + default:
> + WARN(1, "%s: Invalid vdd2 %#x\n",
> + mmc_hostname(host->mmc), vdd2);
> + break;
> + }
> + }
> + }
> +
> if (host->pwr == pwr)
> return;
>
> @@ -2159,7 +2176,13 @@ void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
> sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
>
> pwr |= SDHCI_POWER_ON;
> + if (vdd2 != (unsigned short)-1)
> + pwr |= SDHCI_VDD2_POWER_ON;
> +
> + sdhci_writeb(host, pwr & 0xf, SDHCI_POWER_CONTROL);
> + mdelay(5);
> sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
> + mdelay(5);
>
> if (host->quirks2 & SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON)
> sdhci_runtime_pm_bus_on(host);
> @@ -2175,12 +2198,12 @@ void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
> EXPORT_SYMBOL_GPL(sdhci_set_power_noreg);
>
> void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
> - unsigned short vdd)
> + unsigned short vdd, unsigned short vdd2)
> {
> if (IS_ERR(host->mmc->supply.vmmc))
> - sdhci_set_power_noreg(host, mode, vdd);
> + sdhci_set_power_noreg(host, mode, vdd, vdd2);
> else
> - sdhci_set_power_reg(host, mode, vdd);
> + sdhci_set_power_reg(host, mode, vdd, vdd2);
> }
> EXPORT_SYMBOL_GPL(sdhci_set_power);
>
> @@ -2192,14 +2215,15 @@ EXPORT_SYMBOL_GPL(sdhci_set_power);
> */
> void sdhci_set_power_and_bus_voltage(struct sdhci_host *host,
> unsigned char mode,
> - unsigned short vdd)
> + unsigned short vdd,
> + unsigned short vdd2)
> {
> if (!IS_ERR(host->mmc->supply.vmmc)) {
> struct mmc_host *mmc = host->mmc;
>
> mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
> }
> - sdhci_set_power_noreg(host, mode, vdd);
> + sdhci_set_power_noreg(host, mode, vdd, -1);
> }
> EXPORT_SYMBOL_GPL(sdhci_set_power_and_bus_voltage);
>
> @@ -2377,9 +2401,9 @@ void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> }
>
> if (host->ops->set_power)
> - host->ops->set_power(host, ios->power_mode, ios->vdd);
> + host->ops->set_power(host, ios->power_mode, ios->vdd, -1);
> else
> - sdhci_set_power(host, ios->power_mode, ios->vdd);
> + sdhci_set_power(host, ios->power_mode, ios->vdd, -1);
>
> /* 4.0 host support */
> if (host->version >= SDHCI_SPEC_400) {
> diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
> index ecf55394ea46..f6732f33f29f 100644
> --- a/drivers/mmc/host/sdhci.h
> +++ b/drivers/mmc/host/sdhci.h
> @@ -689,7 +689,7 @@ struct sdhci_ops {
>
> void (*set_clock)(struct sdhci_host *host, unsigned int clock);
> void (*set_power)(struct sdhci_host *host, unsigned char mode,
> - unsigned short vdd);
> + unsigned short vdd, unsigned short vdd2);
>
> u32 (*irq)(struct sdhci_host *host, u32 intmask);
>
> @@ -852,13 +852,10 @@ u16 sdhci_calc_clk(struct sdhci_host *host, unsigned int clock,
> unsigned int *actual_clock);
> void sdhci_set_clock(struct sdhci_host *host, unsigned int clock);
> void sdhci_enable_clk(struct sdhci_host *host, u16 clk);
> -void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
> - unsigned short vdd);
> void sdhci_set_power_and_bus_voltage(struct sdhci_host *host,
> unsigned char mode,
> - unsigned short vdd);
> -void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
> - unsigned short vdd);
> + unsigned short vdd,
> + unsigned short vdd2);
> void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq);
> int sdhci_request_atomic(struct mmc_host *mmc, struct mmc_request *mrq);
> void sdhci_set_bus_width(struct sdhci_host *host, int width);
>
Adrian,
On Fri, Aug 21, 2020 at 05:11:18PM +0300, Adrian Hunter wrote:
> On 10/07/20 2:11 pm, Ben Chuang wrote:
> > From: AKASHI Takahiro <[email protected]>
> >
> > VDD2 is used for powering UHS-II interface.
> > Modify sdhci_set_power_and_bus_voltage(), sdhci_set_power_noreg()
> > and sdhci_set_power_noreg() to handle VDD2.
>
> vdd2 is always 1.8 V and I suspect there may never be support for anything
> else, so we should start with 1.8 V only.
What do you mean here?
You don't want to add an extra argument, vdd2, to sdhci_set_power().
Correct?
> Also can we create uhs2_set_power_reg() and uhs2_set_power_noreg() and use
> the existing ->set_power() callback
Again what do you expect here?
Do you want to see any platform-specific mmc driver who supports UHS-II
to implement its own call back like:
void sdhci_foo_set_power(struct sdhci_host *host, unsigned char mode,
unsigned short vdd)
{
sdhci_set_power(host, mode,vdd);
/* in case that sdhci_uhs2 module is not inserted */
if (!(mmc->caps & MMC_CAP_UHS2))
return;
/* vdd2 specific operation */
if (IS_ERR_OR_NULL(host->mmc->supply.vmmc2))
sdhci_uhs2_set_power_noreg(host, mode);
else
sdhci_uhs2_set_power_reg(host, mode);
/* maybe more platform-specific initialization */
}
struct sdhci_ops sdhci_foo_ops = {
.set_power = sdhci_foo_set_power,
...
}
Is this what you mean?
(I'm not quite sure yet that sdhci_ush2_set_power_noreg() can be split off
from sdhci_set_power_noreg().)
-Takahiro Akashi
}
> >
> > Signed-off-by: Ben Chuang <[email protected]>
> > Signed-off-by: AKASHI Takahiro <[email protected]>
> > ---
> > drivers/mmc/host/sdhci-omap.c | 2 +-
> > drivers/mmc/host/sdhci-pci-core.c | 4 +--
> > drivers/mmc/host/sdhci-pxav3.c | 4 +--
> > drivers/mmc/host/sdhci-xenon.c | 4 +--
> > drivers/mmc/host/sdhci.c | 42 ++++++++++++++++++++++++-------
> > drivers/mmc/host/sdhci.h | 9 +++----
> > 6 files changed, 43 insertions(+), 22 deletions(-)
> >
> > diff --git a/drivers/mmc/host/sdhci-omap.c b/drivers/mmc/host/sdhci-omap.c
> > index 1ec74c2d5c17..1926585debe5 100644
> > --- a/drivers/mmc/host/sdhci-omap.c
> > +++ b/drivers/mmc/host/sdhci-omap.c
> > @@ -678,7 +678,7 @@ static void sdhci_omap_set_clock(struct sdhci_host *host, unsigned int clock)
> > }
> >
> > static void sdhci_omap_set_power(struct sdhci_host *host, unsigned char mode,
> > - unsigned short vdd)
> > + unsigned short vdd, unsigned short vdd2)
> > {
> > struct mmc_host *mmc = host->mmc;
> >
> > diff --git a/drivers/mmc/host/sdhci-pci-core.c b/drivers/mmc/host/sdhci-pci-core.c
> > index bb6802448b2f..40f5a24a8982 100644
> > --- a/drivers/mmc/host/sdhci-pci-core.c
> > +++ b/drivers/mmc/host/sdhci-pci-core.c
> > @@ -629,12 +629,12 @@ static int bxt_get_cd(struct mmc_host *mmc)
> > #define SDHCI_INTEL_PWR_TIMEOUT_UDELAY 100
> >
> > static void sdhci_intel_set_power(struct sdhci_host *host, unsigned char mode,
> > - unsigned short vdd)
> > + unsigned short vdd, unsigned short vdd2)
> > {
> > int cntr;
> > u8 reg;
> >
> > - sdhci_set_power(host, mode, vdd);
> > + sdhci_set_power(host, mode, vdd, -1);
> >
> > if (mode == MMC_POWER_OFF)
> > return;
> > diff --git a/drivers/mmc/host/sdhci-pxav3.c b/drivers/mmc/host/sdhci-pxav3.c
> > index e55037ceda73..457e9425339a 100644
> > --- a/drivers/mmc/host/sdhci-pxav3.c
> > +++ b/drivers/mmc/host/sdhci-pxav3.c
> > @@ -298,12 +298,12 @@ static void pxav3_set_uhs_signaling(struct sdhci_host *host, unsigned int uhs)
> > }
> >
> > static void pxav3_set_power(struct sdhci_host *host, unsigned char mode,
> > - unsigned short vdd)
> > + unsigned short vdd, unsigned short vdd2)
> > {
> > struct mmc_host *mmc = host->mmc;
> > u8 pwr = host->pwr;
> >
> > - sdhci_set_power_noreg(host, mode, vdd);
> > + sdhci_set_power_noreg(host, mode, vdd, -1);
> >
> > if (host->pwr == pwr)
> > return;
> > diff --git a/drivers/mmc/host/sdhci-xenon.c b/drivers/mmc/host/sdhci-xenon.c
> > index 4703cd540c7f..2b0ebb91895a 100644
> > --- a/drivers/mmc/host/sdhci-xenon.c
> > +++ b/drivers/mmc/host/sdhci-xenon.c
> > @@ -214,12 +214,12 @@ static void xenon_set_uhs_signaling(struct sdhci_host *host,
> > }
> >
> > static void xenon_set_power(struct sdhci_host *host, unsigned char mode,
> > - unsigned short vdd)
> > + unsigned short vdd, unsigned short vdd2)
> > {
> > struct mmc_host *mmc = host->mmc;
> > u8 pwr = host->pwr;
> >
> > - sdhci_set_power_noreg(host, mode, vdd);
> > + sdhci_set_power_noreg(host, mode, vdd, -1);
> >
> > if (host->pwr == pwr)
> > return;
> > diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> > index d38d734ec83f..ca3d4a506e01 100644
> > --- a/drivers/mmc/host/sdhci.c
> > +++ b/drivers/mmc/host/sdhci.c
> > @@ -2089,12 +2089,15 @@ void sdhci_set_clock(struct sdhci_host *host, unsigned int clock)
> > EXPORT_SYMBOL_GPL(sdhci_set_clock);
> >
> > static void sdhci_set_power_reg(struct sdhci_host *host, unsigned char mode,
> > - unsigned short vdd)
> > + unsigned short vdd, unsigned short vdd2)
> > {
> > struct mmc_host *mmc = host->mmc;
> >
> > mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
> >
> > + if (mmc->caps & MMC_CAP_UHS2 && !IS_ERR(mmc->supply.vmmc2))
> > + mmc_regulator_set_ocr(mmc, mmc->supply.vmmc2, vdd2);
> > +
> > if (mode != MMC_POWER_OFF)
> > sdhci_writeb(host, SDHCI_POWER_ON, SDHCI_POWER_CONTROL);
> > else
> > @@ -2102,7 +2105,7 @@ static void sdhci_set_power_reg(struct sdhci_host *host, unsigned char mode,
> > }
> >
> > void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
> > - unsigned short vdd)
> > + unsigned short vdd, unsigned short vdd2)
> > {
> > u8 pwr = 0;
> >
> > @@ -2133,6 +2136,20 @@ void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
> > }
> > }
> >
> > + if (mode != MMC_POWER_OFF) {
> > + if (vdd2 != (unsigned short)-1) {
> > + switch (1 << vdd2) {
> > + case MMC_VDD2_165_195:
> > + pwr |= SDHCI_VDD2_POWER_180;
> > + break;
> > + default:
> > + WARN(1, "%s: Invalid vdd2 %#x\n",
> > + mmc_hostname(host->mmc), vdd2);
> > + break;
> > + }
> > + }
> > + }
> > +
> > if (host->pwr == pwr)
> > return;
> >
> > @@ -2159,7 +2176,13 @@ void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
> > sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
> >
> > pwr |= SDHCI_POWER_ON;
> > + if (vdd2 != (unsigned short)-1)
> > + pwr |= SDHCI_VDD2_POWER_ON;
> > +
> > + sdhci_writeb(host, pwr & 0xf, SDHCI_POWER_CONTROL);
> > + mdelay(5);
> > sdhci_writeb(host, pwr, SDHCI_POWER_CONTROL);
> > + mdelay(5);
> >
> > if (host->quirks2 & SDHCI_QUIRK2_CARD_ON_NEEDS_BUS_ON)
> > sdhci_runtime_pm_bus_on(host);
> > @@ -2175,12 +2198,12 @@ void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
> > EXPORT_SYMBOL_GPL(sdhci_set_power_noreg);
> >
> > void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
> > - unsigned short vdd)
> > + unsigned short vdd, unsigned short vdd2)
> > {
> > if (IS_ERR(host->mmc->supply.vmmc))
> > - sdhci_set_power_noreg(host, mode, vdd);
> > + sdhci_set_power_noreg(host, mode, vdd, vdd2);
> > else
> > - sdhci_set_power_reg(host, mode, vdd);
> > + sdhci_set_power_reg(host, mode, vdd, vdd2);
> > }
> > EXPORT_SYMBOL_GPL(sdhci_set_power);
> >
> > @@ -2192,14 +2215,15 @@ EXPORT_SYMBOL_GPL(sdhci_set_power);
> > */
> > void sdhci_set_power_and_bus_voltage(struct sdhci_host *host,
> > unsigned char mode,
> > - unsigned short vdd)
> > + unsigned short vdd,
> > + unsigned short vdd2)
> > {
> > if (!IS_ERR(host->mmc->supply.vmmc)) {
> > struct mmc_host *mmc = host->mmc;
> >
> > mmc_regulator_set_ocr(mmc, mmc->supply.vmmc, vdd);
> > }
> > - sdhci_set_power_noreg(host, mode, vdd);
> > + sdhci_set_power_noreg(host, mode, vdd, -1);
> > }
> > EXPORT_SYMBOL_GPL(sdhci_set_power_and_bus_voltage);
> >
> > @@ -2377,9 +2401,9 @@ void sdhci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
> > }
> >
> > if (host->ops->set_power)
> > - host->ops->set_power(host, ios->power_mode, ios->vdd);
> > + host->ops->set_power(host, ios->power_mode, ios->vdd, -1);
> > else
> > - sdhci_set_power(host, ios->power_mode, ios->vdd);
> > + sdhci_set_power(host, ios->power_mode, ios->vdd, -1);
> >
> > /* 4.0 host support */
> > if (host->version >= SDHCI_SPEC_400) {
> > diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
> > index ecf55394ea46..f6732f33f29f 100644
> > --- a/drivers/mmc/host/sdhci.h
> > +++ b/drivers/mmc/host/sdhci.h
> > @@ -689,7 +689,7 @@ struct sdhci_ops {
> >
> > void (*set_clock)(struct sdhci_host *host, unsigned int clock);
> > void (*set_power)(struct sdhci_host *host, unsigned char mode,
> > - unsigned short vdd);
> > + unsigned short vdd, unsigned short vdd2);
> >
> > u32 (*irq)(struct sdhci_host *host, u32 intmask);
> >
> > @@ -852,13 +852,10 @@ u16 sdhci_calc_clk(struct sdhci_host *host, unsigned int clock,
> > unsigned int *actual_clock);
> > void sdhci_set_clock(struct sdhci_host *host, unsigned int clock);
> > void sdhci_enable_clk(struct sdhci_host *host, u16 clk);
> > -void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
> > - unsigned short vdd);
> > void sdhci_set_power_and_bus_voltage(struct sdhci_host *host,
> > unsigned char mode,
> > - unsigned short vdd);
> > -void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
> > - unsigned short vdd);
> > + unsigned short vdd,
> > + unsigned short vdd2);
> > void sdhci_request(struct mmc_host *mmc, struct mmc_request *mrq);
> > int sdhci_request_atomic(struct mmc_host *mmc, struct mmc_request *mrq);
> > void sdhci_set_bus_width(struct sdhci_host *host, int width);
> >
>
On 14/09/20 8:45 am, AKASHI Takahiro wrote:
> Adrian,
>
> On Fri, Aug 21, 2020 at 05:11:18PM +0300, Adrian Hunter wrote:
>> On 10/07/20 2:11 pm, Ben Chuang wrote:
>>> From: AKASHI Takahiro <[email protected]>
>>>
>>> VDD2 is used for powering UHS-II interface.
>>> Modify sdhci_set_power_and_bus_voltage(), sdhci_set_power_noreg()
>>> and sdhci_set_power_noreg() to handle VDD2.
>>
>> vdd2 is always 1.8 V and I suspect there may never be support for anything
>> else, so we should start with 1.8 V only.
>
> What do you mean here?
> You don't want to add an extra argument, vdd2, to sdhci_set_power().
> Correct?
Yes
>
>> Also can we create uhs2_set_power_reg() and uhs2_set_power_noreg() and use
>> the existing ->set_power() callback
>
> Again what do you expect here?
>
> Do you want to see any platform-specific mmc driver who supports UHS-II
> to implement its own call back like:
Not exactly. I expect there to be a common implementation in sdhci-uhs2.c
called sdhci_uhs2_set_power() for example, that drivers can use by setting
their .set_power = sdhci_uhs2_set_power. If they need platform-specific
code as well then their platform-specific code can call
sdhci_uhs2_set_power() if desired.
>
> void sdhci_foo_set_power(struct sdhci_host *host, unsigned char mode,
> unsigned short vdd)
> {
> sdhci_set_power(host, mode,vdd);
>
> /* in case that sdhci_uhs2 module is not inserted */
> if (!(mmc->caps & MMC_CAP_UHS2))
> return;
>
> /* vdd2 specific operation */
> if (IS_ERR_OR_NULL(host->mmc->supply.vmmc2))
> sdhci_uhs2_set_power_noreg(host, mode);
> else
> sdhci_uhs2_set_power_reg(host, mode);
>
> /* maybe more platform-specific initialization */
> }
>
> struct sdhci_ops sdhci_foo_ops = {
> .set_power = sdhci_foo_set_power,
> ...
> }
>
> Is this what you mean?
> (I'm not quite sure yet that sdhci_ush2_set_power_noreg() can be split off
> from sdhci_set_power_noreg().)
>
> -Takahiro Akashi
Adrain,
On Mon, Sep 14, 2020 at 09:36:02AM +0300, Adrian Hunter wrote:
> On 14/09/20 8:45 am, AKASHI Takahiro wrote:
> > Adrian,
> >
> > On Fri, Aug 21, 2020 at 05:11:18PM +0300, Adrian Hunter wrote:
> >> On 10/07/20 2:11 pm, Ben Chuang wrote:
> >>> From: AKASHI Takahiro <[email protected]>
> >>>
> >>> VDD2 is used for powering UHS-II interface.
> >>> Modify sdhci_set_power_and_bus_voltage(), sdhci_set_power_noreg()
> >>> and sdhci_set_power_noreg() to handle VDD2.
> >>
> >> vdd2 is always 1.8 V and I suspect there may never be support for anything
> >> else, so we should start with 1.8 V only.
> >
> > What do you mean here?
> > You don't want to add an extra argument, vdd2, to sdhci_set_power().
> > Correct?
>
> Yes
>
> >
> >> Also can we create uhs2_set_power_reg() and uhs2_set_power_noreg() and use
> >> the existing ->set_power() callback
> >
> > Again what do you expect here?
> >
> > Do you want to see any platform-specific mmc driver who supports UHS-II
> > to implement its own call back like:
>
> Not exactly. I expect there to be a common implementation in sdhci-uhs2.c
> called sdhci_uhs2_set_power() for example, that drivers can use by setting
> their .set_power = sdhci_uhs2_set_power. If they need platform-specific
> code as well then their platform-specific code can call
> sdhci_uhs2_set_power() if desired.
>
> >
> > void sdhci_foo_set_power(struct sdhci_host *host, unsigned char mode,
> > unsigned short vdd)
> > {
> > sdhci_set_power(host, mode,vdd);
> >
> > /* in case that sdhci_uhs2 module is not inserted */
> > if (!(mmc->caps & MMC_CAP_UHS2))
> > return;
> >
> > /* vdd2 specific operation */
> > if (IS_ERR_OR_NULL(host->mmc->supply.vmmc2))
> > sdhci_uhs2_set_power_noreg(host, mode);
> > else
> > sdhci_uhs2_set_power_reg(host, mode);
> >
> > /* maybe more platform-specific initialization */
> > }
> >
> > struct sdhci_ops sdhci_foo_ops = {
> > .set_power = sdhci_foo_set_power,
> > ...
> > }
What do you think about this logic in general?
(If necessary, read it replacing "foo" to "uhs2".)
What I'm concerned about is SDHCI_POWER_CONTROL register.
Vdd and vdd2 are controlled with corresponding bits in this register.
It seems to be "natural" to me that vdd and vdd2 are enabled
in a single function rather than putting them in separate ones.
In particular, in the case of sdhci_set_power_noreg(), there exist a couple
of "quirks" around writing the bits to SDHCI_POWER_CONTROL register.
I don't know how we should handle them if we have a separate function,
say, sdhci_uhs2_set_power_noreg().
Do you want to see a copy of the same logic in sdhci_uhs2_set_power_noreg()?
-Takahiro Akashi
> >
> > Is this what you mean?
> > (I'm not quite sure yet that sdhci_ush2_set_power_noreg() can be split off
> > from sdhci_set_power_noreg().)
> >
> > -Takahiro Akashi
On 15/09/20 9:24 am, AKASHI Takahiro wrote:
> Adrain,
>
> On Mon, Sep 14, 2020 at 09:36:02AM +0300, Adrian Hunter wrote:
>> On 14/09/20 8:45 am, AKASHI Takahiro wrote:
>>> Adrian,
>>>
>>> On Fri, Aug 21, 2020 at 05:11:18PM +0300, Adrian Hunter wrote:
>>>> On 10/07/20 2:11 pm, Ben Chuang wrote:
>>>>> From: AKASHI Takahiro <[email protected]>
>>>>>
>>>>> VDD2 is used for powering UHS-II interface.
>>>>> Modify sdhci_set_power_and_bus_voltage(), sdhci_set_power_noreg()
>>>>> and sdhci_set_power_noreg() to handle VDD2.
>>>>
>>>> vdd2 is always 1.8 V and I suspect there may never be support for anything
>>>> else, so we should start with 1.8 V only.
>>>
>>> What do you mean here?
>>> You don't want to add an extra argument, vdd2, to sdhci_set_power().
>>> Correct?
>>
>> Yes
>>
>>>
>>>> Also can we create uhs2_set_power_reg() and uhs2_set_power_noreg() and use
>>>> the existing ->set_power() callback
>>>
>>> Again what do you expect here?
>>>
>>> Do you want to see any platform-specific mmc driver who supports UHS-II
>>> to implement its own call back like:
>>
>> Not exactly. I expect there to be a common implementation in sdhci-uhs2.c
>> called sdhci_uhs2_set_power() for example, that drivers can use by setting
>> their .set_power = sdhci_uhs2_set_power. If they need platform-specific
>> code as well then their platform-specific code can call
>> sdhci_uhs2_set_power() if desired.
>>
>>>
>>> void sdhci_foo_set_power(struct sdhci_host *host, unsigned char mode,
>>> unsigned short vdd)
>>> {
>>> sdhci_set_power(host, mode,vdd);
>>>
>>> /* in case that sdhci_uhs2 module is not inserted */
>>> if (!(mmc->caps & MMC_CAP_UHS2))
>>> return;
>>>
>>> /* vdd2 specific operation */
>>> if (IS_ERR_OR_NULL(host->mmc->supply.vmmc2))
>>> sdhci_uhs2_set_power_noreg(host, mode);
>>> else
>>> sdhci_uhs2_set_power_reg(host, mode);
>>>
>>> /* maybe more platform-specific initialization */
>>> }
>>>
>>> struct sdhci_ops sdhci_foo_ops = {
>>> .set_power = sdhci_foo_set_power,
>>> ...
>>> }
>
> What do you think about this logic in general?
> (If necessary, read it replacing "foo" to "uhs2".)
>
> What I'm concerned about is SDHCI_POWER_CONTROL register.
> Vdd and vdd2 are controlled with corresponding bits in this register.
> It seems to be "natural" to me that vdd and vdd2 are enabled
> in a single function rather than putting them in separate ones.
>
> In particular, in the case of sdhci_set_power_noreg(), there exist a couple
> of "quirks" around writing the bits to SDHCI_POWER_CONTROL register.
We can treat UHS-II support as being for new hardware and therefore
we don't necessarily need to support old quirks. Just make sure if
a quirk is not being supported, to add a comment to that effect.
> I don't know how we should handle them if we have a separate function,
> say, sdhci_uhs2_set_power_noreg().
> Do you want to see a copy of the same logic in sdhci_uhs2_set_power_noreg()?
I would probably consider making another function that non-UHS-II
drivers do not need to care about e.g. existing drivers can keep using
sdhci_set_power_noreg() and sdhci_uhs2 can call __sdhci_set_power_noreg()
diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 592a55a34b58..ffe54f06fe38 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -2013,8 +2013,8 @@ static void sdhci_set_power_reg(struct sdhci_host *host, unsigned char mode,
sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
}
-void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
- unsigned short vdd)
+void __sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
+ unsigned short vdd, u8 vdd2)
{
u8 pwr = 0;
@@ -2048,7 +2048,7 @@ void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
if (host->pwr == pwr)
return;
- host->pwr = pwr;
+ host->pwr = pwr | vdd2;
if (pwr == 0) {
sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
@@ -2085,6 +2085,13 @@ void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
mdelay(10);
}
}
+EXPORT_SYMBOL_GPL(__sdhci_set_power_noreg);
+
+void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
+ unsigned short vdd)
+{
+ __sdhci_set_power_noreg(host, mode, vdd, 0);
+}
EXPORT_SYMBOL_GPL(sdhci_set_power_noreg);
void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
>
> -Takahiro Akashi
>
>
>>>
>>> Is this what you mean?
>>> (I'm not quite sure yet that sdhci_ush2_set_power_noreg() can be split off
>>> from sdhci_set_power_noreg().)
>>>
>>> -Takahiro Akashi
Adrian,
On Wed, Sep 16, 2020 at 09:42:28AM +0300, Adrian Hunter wrote:
> On 15/09/20 9:24 am, AKASHI Takahiro wrote:
> > Adrain,
> >
> > On Mon, Sep 14, 2020 at 09:36:02AM +0300, Adrian Hunter wrote:
> >> On 14/09/20 8:45 am, AKASHI Takahiro wrote:
> >>> Adrian,
> >>>
> >>> On Fri, Aug 21, 2020 at 05:11:18PM +0300, Adrian Hunter wrote:
> >>>> On 10/07/20 2:11 pm, Ben Chuang wrote:
> >>>>> From: AKASHI Takahiro <[email protected]>
> >>>>>
> >>>>> VDD2 is used for powering UHS-II interface.
> >>>>> Modify sdhci_set_power_and_bus_voltage(), sdhci_set_power_noreg()
> >>>>> and sdhci_set_power_noreg() to handle VDD2.
> >>>>
> >>>> vdd2 is always 1.8 V and I suspect there may never be support for anything
> >>>> else, so we should start with 1.8 V only.
> >>>
> >>> What do you mean here?
> >>> You don't want to add an extra argument, vdd2, to sdhci_set_power().
> >>> Correct?
> >>
> >> Yes
> >>
> >>>
> >>>> Also can we create uhs2_set_power_reg() and uhs2_set_power_noreg() and use
> >>>> the existing ->set_power() callback
> >>>
> >>> Again what do you expect here?
> >>>
> >>> Do you want to see any platform-specific mmc driver who supports UHS-II
> >>> to implement its own call back like:
> >>
> >> Not exactly. I expect there to be a common implementation in sdhci-uhs2.c
> >> called sdhci_uhs2_set_power() for example, that drivers can use by setting
> >> their .set_power = sdhci_uhs2_set_power. If they need platform-specific
> >> code as well then their platform-specific code can call
> >> sdhci_uhs2_set_power() if desired.
> >>
> >>>
> >>> void sdhci_foo_set_power(struct sdhci_host *host, unsigned char mode,
> >>> unsigned short vdd)
> >>> {
> >>> sdhci_set_power(host, mode,vdd);
> >>>
> >>> /* in case that sdhci_uhs2 module is not inserted */
> >>> if (!(mmc->caps & MMC_CAP_UHS2))
> >>> return;
> >>>
> >>> /* vdd2 specific operation */
> >>> if (IS_ERR_OR_NULL(host->mmc->supply.vmmc2))
> >>> sdhci_uhs2_set_power_noreg(host, mode);
> >>> else
> >>> sdhci_uhs2_set_power_reg(host, mode);
> >>>
> >>> /* maybe more platform-specific initialization */
> >>> }
> >>>
> >>> struct sdhci_ops sdhci_foo_ops = {
> >>> .set_power = sdhci_foo_set_power,
> >>> ...
> >>> }
> >
> > What do you think about this logic in general?
> > (If necessary, read it replacing "foo" to "uhs2".)
> >
> > What I'm concerned about is SDHCI_POWER_CONTROL register.
> > Vdd and vdd2 are controlled with corresponding bits in this register.
> > It seems to be "natural" to me that vdd and vdd2 are enabled
> > in a single function rather than putting them in separate ones.
> >
> > In particular, in the case of sdhci_set_power_noreg(), there exist a couple
> > of "quirks" around writing the bits to SDHCI_POWER_CONTROL register.
>
> We can treat UHS-II support as being for new hardware and therefore
> we don't necessarily need to support old quirks. Just make sure if
> a quirk is not being supported, to add a comment to that effect.
>
> > I don't know how we should handle them if we have a separate function,
> > say, sdhci_uhs2_set_power_noreg().
> > Do you want to see a copy of the same logic in sdhci_uhs2_set_power_noreg()?
>
> I would probably consider making another function that non-UHS-II
> drivers do not need to care about e.g. existing drivers can keep using
> sdhci_set_power_noreg() and sdhci_uhs2 can call __sdhci_set_power_noreg()
Well, but
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index 592a55a34b58..ffe54f06fe38 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -2013,8 +2013,8 @@ static void sdhci_set_power_reg(struct sdhci_host *host, unsigned char mode,
> sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
> }
>
> -void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
> - unsigned short vdd)
> +void __sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
> + unsigned short vdd, u8 vdd2)
> {
> u8 pwr = 0;
>
> @@ -2048,7 +2048,7 @@ void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
> if (host->pwr == pwr)
> return;
>
> - host->pwr = pwr;
> + host->pwr = pwr | vdd2;
(the line above is wrong, but anyway)
we must also set
if (vdd2)
pwr |= SDHCI_VDD2_POWER_ON;
As a result, this new function is the almost exact same as the corresponding one
in our v3 patch, except its name.
Now do you allow such a small piece of UHS-II specific code to be
placed in sdhci.c?
-Takahiro Akashi
> if (pwr == 0) {
> sdhci_writeb(host, 0, SDHCI_POWER_CONTROL);
> @@ -2085,6 +2085,13 @@ void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
> mdelay(10);
> }
> }
> +EXPORT_SYMBOL_GPL(__sdhci_set_power_noreg);
> +
> +void sdhci_set_power_noreg(struct sdhci_host *host, unsigned char mode,
> + unsigned short vdd)
> +{
> + __sdhci_set_power_noreg(host, mode, vdd, 0);
> +}
> EXPORT_SYMBOL_GPL(sdhci_set_power_noreg);
>
> void sdhci_set_power(struct sdhci_host *host, unsigned char mode,
>
> >
> > -Takahiro Akashi
> >
> >
> >>>
> >>> Is this what you mean?
> >>> (I'm not quite sure yet that sdhci_ush2_set_power_noreg() can be split off
> >>> from sdhci_set_power_noreg().)
> >>>
> >>> -Takahiro Akashi
>