2020-09-15 11:35:17

by Roger Quadros

[permalink] [raw]
Subject: [PATCH v3 5/6] arm64: dts: ti: k3-j7200-common-proc-board: Configure the SERDES lane function

From: Kishon Vijay Abraham I <[email protected]>

First two lanes of SERDES is connected to PCIe, third lane is
connected to QSGMII and the last lane is connected to USB. However,
Cadence torrent SERDES doesn't support more than 2 protocols
at the same time. Configure it only for PCIe and QSGMII.

Signed-off-by: Kishon Vijay Abraham I <[email protected]>
Signed-off-by: Roger Quadros <[email protected]>
---
arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts | 6 ++++++
1 file changed, 6 insertions(+)

diff --git a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
index 8e534ef8a3f5..0ecaba600704 100644
--- a/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
+++ b/arch/arm64/boot/dts/ti/k3-j7200-common-proc-board.dts
@@ -6,6 +6,7 @@
/dts-v1/;

#include "k3-j7200-som-p0.dtsi"
+#include <dt-bindings/mux/mux-j7200-wiz.h>

/ {
chosen {
@@ -139,3 +140,8 @@
ti,driver-strength-ohm = <50>;
disable-wp;
};
+
+&serdes_ln_ctrl {
+ idle-states = <SERDES0_LANE0_PCIE1_LANE0>, <SERDES0_LANE1_PCIE1_LANE1>,
+ <SERDES0_LANE2_QSGMII_LANE1>, <SERDES0_LANE3_IP4_UNUSED>;
+};
--
Texas Instruments Finland Oy, Porkkalankatu 22, 00180 Helsinki.
Y-tunnus/Business ID: 0615521-4. Kotipaikka/Domicile: Helsinki