Add support for devlink reload action fw_activate. To activate firmware
image the mlx5 driver resets the firmware and reloads it from flash. If
a new image was stored on flash it will be loaded. Once this reload
command is executed the driver initiates fw sync reset flow, where the
firmware synchronizes all PFs on coming reset and driver reload.
Signed-off-by: Moshe Shemesh <[email protected]>
---
v3 -> v4:
- Renamed actions_done to actions_performed
v2 -> v3:
- Return the reload actions done
- Update reload action counters if reset initiated by remote host
v1 -> v2:
- Have fw_activate action instead of fw_reset level
---
.../net/ethernet/mellanox/mlx5/core/devlink.c | 62 ++++++++++++++++---
.../ethernet/mellanox/mlx5/core/fw_reset.c | 60 ++++++++++++++++--
.../ethernet/mellanox/mlx5/core/fw_reset.h | 1 +
3 files changed, 109 insertions(+), 14 deletions(-)
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/devlink.c b/drivers/net/ethernet/mellanox/mlx5/core/devlink.c
index f6b29deaf02e..fa8f6abbea4e 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/devlink.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/devlink.c
@@ -4,6 +4,7 @@
#include <devlink.h>
#include "mlx5_core.h"
+#include "fw_reset.h"
#include "fs_core.h"
#include "eswitch.h"
@@ -88,6 +89,32 @@ mlx5_devlink_info_get(struct devlink *devlink, struct devlink_info_req *req,
return 0;
}
+static int mlx5_devlink_reload_fw_activate(struct devlink *devlink, struct netlink_ext_ack *extack)
+{
+ struct mlx5_core_dev *dev = devlink_priv(devlink);
+ u8 reset_level, reset_type, net_port_alive;
+ int err;
+
+ err = mlx5_reg_mfrl_query(dev, &reset_level, &reset_type);
+ if (err)
+ return err;
+ if (!(reset_level & MLX5_MFRL_REG_RESET_LEVEL3)) {
+ NL_SET_ERR_MSG_MOD(extack, "FW activate requires reboot");
+ return -EINVAL;
+ }
+
+ net_port_alive = !!(reset_type & MLX5_MFRL_REG_RESET_TYPE_NET_PORT_ALIVE);
+ err = mlx5_fw_set_reset_sync(dev, net_port_alive);
+ if (err)
+ goto out;
+
+ err = mlx5_fw_wait_fw_reset_done(dev);
+out:
+ if (err)
+ NL_SET_ERR_MSG_MOD(extack, "FW activate command failed");
+ return err;
+}
+
static int mlx5_devlink_reload_down(struct devlink *devlink, bool netns_change,
enum devlink_reload_action action,
enum devlink_reload_action_limit_level limit_level,
@@ -95,8 +122,17 @@ static int mlx5_devlink_reload_down(struct devlink *devlink, bool netns_change,
{
struct mlx5_core_dev *dev = devlink_priv(devlink);
- mlx5_unload_one(dev, false);
- return 0;
+ switch (action) {
+ case DEVLINK_RELOAD_ACTION_DRIVER_REINIT:
+ mlx5_unload_one(dev, false);
+ return 0;
+ case DEVLINK_RELOAD_ACTION_FW_ACTIVATE:
+ return mlx5_devlink_reload_fw_activate(devlink, extack);
+ default:
+ /* Unsupported action should not get to this function */
+ WARN_ON(1);
+ return -EOPNOTSUPP;
+ }
}
static int mlx5_devlink_reload_up(struct devlink *devlink, enum devlink_reload_action action,
@@ -104,13 +140,22 @@ static int mlx5_devlink_reload_up(struct devlink *devlink, enum devlink_reload_a
struct netlink_ext_ack *extack, unsigned long *actions_performed)
{
struct mlx5_core_dev *dev = devlink_priv(devlink);
- int err;
- err = mlx5_load_one(dev, false);
- if (err)
- return err;
if (actions_performed)
- *actions_performed = BIT(DEVLINK_RELOAD_ACTION_DRIVER_REINIT);
+ *actions_performed = BIT(action);
+
+ switch (action) {
+ case DEVLINK_RELOAD_ACTION_DRIVER_REINIT:
+ case DEVLINK_RELOAD_ACTION_FW_ACTIVATE:
+ /* On fw_activate action, also driver is reloaded and reinit performed */
+ if (actions_performed)
+ *actions_performed |= BIT(DEVLINK_RELOAD_ACTION_DRIVER_REINIT);
+ return mlx5_load_one(dev, false);
+ default:
+ /* Unsupported action should not get to this function */
+ WARN_ON(1);
+ return -EOPNOTSUPP;
+ }
return 0;
}
@@ -128,7 +173,8 @@ static const struct devlink_ops mlx5_devlink_ops = {
#endif
.flash_update = mlx5_devlink_flash_update,
.info_get = mlx5_devlink_info_get,
- .supported_reload_actions = BIT(DEVLINK_RELOAD_ACTION_DRIVER_REINIT),
+ .supported_reload_actions = BIT(DEVLINK_RELOAD_ACTION_DRIVER_REINIT) |
+ BIT(DEVLINK_RELOAD_ACTION_FW_ACTIVATE),
.supported_reload_action_limit_levels = BIT(DEVLINK_RELOAD_ACTION_LIMIT_LEVEL_NONE),
.reload_down = mlx5_devlink_reload_down,
.reload_up = mlx5_devlink_reload_up,
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c b/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c
index 61237f4836cc..550f67b00473 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c
+++ b/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c
@@ -5,6 +5,7 @@
enum {
MLX5_FW_RESET_FLAGS_RESET_REQUESTED,
+ MLX5_FW_RESET_FLAGS_PENDING_COMP
};
struct mlx5_fw_reset {
@@ -17,6 +18,8 @@ struct mlx5_fw_reset {
struct work_struct reset_abort_work;
unsigned long reset_flags;
struct timer_list timer;
+ struct completion done;
+ int ret;
};
static int mlx5_reg_mfrl_set(struct mlx5_core_dev *dev, u8 reset_level,
@@ -53,7 +56,14 @@ int mlx5_reg_mfrl_query(struct mlx5_core_dev *dev, u8 *reset_level, u8 *reset_ty
int mlx5_fw_set_reset_sync(struct mlx5_core_dev *dev, u8 reset_type_sel)
{
- return mlx5_reg_mfrl_set(dev, MLX5_MFRL_REG_RESET_LEVEL3, reset_type_sel, 0, true);
+ struct mlx5_fw_reset *fw_reset = dev->priv.fw_reset;
+ int err;
+
+ set_bit(MLX5_FW_RESET_FLAGS_PENDING_COMP, &fw_reset->reset_flags);
+ err = mlx5_reg_mfrl_set(dev, MLX5_MFRL_REG_RESET_LEVEL3, reset_type_sel, 0, true);
+ if (err)
+ clear_bit(MLX5_FW_RESET_FLAGS_PENDING_COMP, &fw_reset->reset_flags);
+ return err;
}
int mlx5_fw_set_live_patch(struct mlx5_core_dev *dev)
@@ -66,19 +76,36 @@ static int mlx5_fw_set_reset_sync_ack(struct mlx5_core_dev *dev)
return mlx5_reg_mfrl_set(dev, MLX5_MFRL_REG_RESET_LEVEL3, 0, 1, false);
}
+static void mlx5_fw_reset_complete_reload(struct mlx5_core_dev *dev)
+{
+ struct mlx5_fw_reset *fw_reset = dev->priv.fw_reset;
+
+ /* if this is the driver that initiated the fw reset, devlink completed the reload */
+ if (test_bit(MLX5_FW_RESET_FLAGS_PENDING_COMP, &fw_reset->reset_flags)) {
+ complete(&fw_reset->done);
+ } else {
+ mlx5_load_one(dev, false);
+ devlink_reload_implicit_actions_performed(priv_to_devlink(dev),
+ DEVLINK_RELOAD_ACTION_LIMIT_LEVEL_NONE,
+ BIT(DEVLINK_RELOAD_ACTION_DRIVER_REINIT) |
+ BIT(DEVLINK_RELOAD_ACTION_FW_ACTIVATE));
+ }
+}
+
static void mlx5_sync_reset_reload_work(struct work_struct *work)
{
struct mlx5_fw_reset *fw_reset = container_of(work, struct mlx5_fw_reset,
reset_reload_work);
struct mlx5_core_dev *dev = fw_reset->dev;
+ int err;
mlx5_enter_error_state(dev, true);
mlx5_unload_one(dev, false);
- if (mlx5_health_wait_pci_up(dev)) {
+ err = mlx5_health_wait_pci_up(dev);
+ if (err)
mlx5_core_err(dev, "reset reload flow aborted, PCI reads still not working\n");
- return;
- }
- mlx5_load_one(dev, false);
+ fw_reset->ret = err;
+ mlx5_fw_reset_complete_reload(dev);
}
static void mlx5_stop_sync_reset_poll(struct mlx5_core_dev *dev)
@@ -264,7 +291,8 @@ static void mlx5_sync_reset_now_event(struct work_struct *work)
done:
if (err)
mlx5_start_health_poll(dev);
- mlx5_load_one(dev, false);
+ fw_reset->ret = err;
+ mlx5_fw_reset_complete_reload(dev);
}
static void mlx5_sync_reset_abort_event(struct work_struct *work)
@@ -313,6 +341,25 @@ static int fw_reset_event_notifier(struct notifier_block *nb, unsigned long acti
return NOTIFY_OK;
}
+#define MLX5_FW_RESET_TIMEOUT_MSEC 5000
+int mlx5_fw_wait_fw_reset_done(struct mlx5_core_dev *dev)
+{
+ unsigned long timeout = msecs_to_jiffies(MLX5_FW_RESET_TIMEOUT_MSEC);
+ struct mlx5_fw_reset *fw_reset = dev->priv.fw_reset;
+ int err;
+
+ if (!wait_for_completion_timeout(&fw_reset->done, timeout)) {
+ mlx5_core_warn(dev, "FW sync reset timeout after %d seconds\n",
+ MLX5_FW_RESET_TIMEOUT_MSEC / 1000);
+ err = -ETIMEDOUT;
+ goto out;
+ }
+ err = fw_reset->ret;
+out:
+ clear_bit(MLX5_FW_RESET_FLAGS_PENDING_COMP, &fw_reset->reset_flags);
+ return err;
+}
+
int mlx5_fw_reset_events_init(struct mlx5_core_dev *dev)
{
struct mlx5_fw_reset *fw_reset = kzalloc(sizeof(*fw_reset), GFP_KERNEL);
@@ -336,6 +383,7 @@ int mlx5_fw_reset_events_init(struct mlx5_core_dev *dev)
MLX5_NB_INIT(&fw_reset->nb, fw_reset_event_notifier, GENERAL_EVENT);
mlx5_eq_notifier_register(dev, &fw_reset->nb);
+ init_completion(&fw_reset->done);
return 0;
}
diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.h b/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.h
index 278f538ea92a..d7ee951a2258 100644
--- a/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.h
+++ b/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.h
@@ -10,6 +10,7 @@ int mlx5_reg_mfrl_query(struct mlx5_core_dev *dev, u8 *reset_level, u8 *reset_ty
int mlx5_fw_set_reset_sync(struct mlx5_core_dev *dev, u8 reset_type_sel);
int mlx5_fw_set_live_patch(struct mlx5_core_dev *dev);
+int mlx5_fw_wait_fw_reset_done(struct mlx5_core_dev *dev);
int mlx5_fw_reset_events_init(struct mlx5_core_dev *dev);
void mlx5_fw_reset_events_cleanup(struct mlx5_core_dev *dev);
--
2.17.1
Mon, Sep 14, 2020 at 08:07:57AM CEST, [email protected] wrote:
>Add support for devlink reload action fw_activate. To activate firmware
>image the mlx5 driver resets the firmware and reloads it from flash. If
>a new image was stored on flash it will be loaded. Once this reload
>command is executed the driver initiates fw sync reset flow, where the
>firmware synchronizes all PFs on coming reset and driver reload.
>
>Signed-off-by: Moshe Shemesh <[email protected]>
>---
>v3 -> v4:
>- Renamed actions_done to actions_performed
>v2 -> v3:
>- Return the reload actions done
>- Update reload action counters if reset initiated by remote host
>v1 -> v2:
>- Have fw_activate action instead of fw_reset level
>---
> .../net/ethernet/mellanox/mlx5/core/devlink.c | 62 ++++++++++++++++---
> .../ethernet/mellanox/mlx5/core/fw_reset.c | 60 ++++++++++++++++--
> .../ethernet/mellanox/mlx5/core/fw_reset.h | 1 +
> 3 files changed, 109 insertions(+), 14 deletions(-)
>
>diff --git a/drivers/net/ethernet/mellanox/mlx5/core/devlink.c b/drivers/net/ethernet/mellanox/mlx5/core/devlink.c
>index f6b29deaf02e..fa8f6abbea4e 100644
>--- a/drivers/net/ethernet/mellanox/mlx5/core/devlink.c
>+++ b/drivers/net/ethernet/mellanox/mlx5/core/devlink.c
>@@ -4,6 +4,7 @@
> #include <devlink.h>
>
> #include "mlx5_core.h"
>+#include "fw_reset.h"
> #include "fs_core.h"
> #include "eswitch.h"
>
>@@ -88,6 +89,32 @@ mlx5_devlink_info_get(struct devlink *devlink, struct devlink_info_req *req,
> return 0;
> }
>
>+static int mlx5_devlink_reload_fw_activate(struct devlink *devlink, struct netlink_ext_ack *extack)
>+{
>+ struct mlx5_core_dev *dev = devlink_priv(devlink);
>+ u8 reset_level, reset_type, net_port_alive;
>+ int err;
>+
>+ err = mlx5_reg_mfrl_query(dev, &reset_level, &reset_type);
>+ if (err)
>+ return err;
>+ if (!(reset_level & MLX5_MFRL_REG_RESET_LEVEL3)) {
>+ NL_SET_ERR_MSG_MOD(extack, "FW activate requires reboot");
>+ return -EINVAL;
>+ }
>+
>+ net_port_alive = !!(reset_type & MLX5_MFRL_REG_RESET_TYPE_NET_PORT_ALIVE);
>+ err = mlx5_fw_set_reset_sync(dev, net_port_alive);
>+ if (err)
>+ goto out;
>+
>+ err = mlx5_fw_wait_fw_reset_done(dev);
>+out:
>+ if (err)
>+ NL_SET_ERR_MSG_MOD(extack, "FW activate command failed");
>+ return err;
>+}
>+
> static int mlx5_devlink_reload_down(struct devlink *devlink, bool netns_change,
> enum devlink_reload_action action,
> enum devlink_reload_action_limit_level limit_level,
>@@ -95,8 +122,17 @@ static int mlx5_devlink_reload_down(struct devlink *devlink, bool netns_change,
> {
> struct mlx5_core_dev *dev = devlink_priv(devlink);
>
>- mlx5_unload_one(dev, false);
>- return 0;
>+ switch (action) {
>+ case DEVLINK_RELOAD_ACTION_DRIVER_REINIT:
>+ mlx5_unload_one(dev, false);
>+ return 0;
>+ case DEVLINK_RELOAD_ACTION_FW_ACTIVATE:
>+ return mlx5_devlink_reload_fw_activate(devlink, extack);
>+ default:
>+ /* Unsupported action should not get to this function */
>+ WARN_ON(1);
>+ return -EOPNOTSUPP;
>+ }
> }
>
> static int mlx5_devlink_reload_up(struct devlink *devlink, enum devlink_reload_action action,
>@@ -104,13 +140,22 @@ static int mlx5_devlink_reload_up(struct devlink *devlink, enum devlink_reload_a
> struct netlink_ext_ack *extack, unsigned long *actions_performed)
> {
> struct mlx5_core_dev *dev = devlink_priv(devlink);
>- int err;
>
>- err = mlx5_load_one(dev, false);
>- if (err)
>- return err;
> if (actions_performed)
>- *actions_performed = BIT(DEVLINK_RELOAD_ACTION_DRIVER_REINIT);
>+ *actions_performed = BIT(action);
>+
>+ switch (action) {
>+ case DEVLINK_RELOAD_ACTION_DRIVER_REINIT:
>+ case DEVLINK_RELOAD_ACTION_FW_ACTIVATE:
>+ /* On fw_activate action, also driver is reloaded and reinit performed */
>+ if (actions_performed)
>+ *actions_performed |= BIT(DEVLINK_RELOAD_ACTION_DRIVER_REINIT);
You should set DEVLINK_RELOAD_ACTION_FW_ACTIVATE bit in actions_performed
upon activation.
>+ return mlx5_load_one(dev, false);
>+ default:
>+ /* Unsupported action should not get to this function */
>+ WARN_ON(1);
>+ return -EOPNOTSUPP;
>+ }
>
> return 0;
> }
>@@ -128,7 +173,8 @@ static const struct devlink_ops mlx5_devlink_ops = {
> #endif
> .flash_update = mlx5_devlink_flash_update,
> .info_get = mlx5_devlink_info_get,
>- .supported_reload_actions = BIT(DEVLINK_RELOAD_ACTION_DRIVER_REINIT),
>+ .supported_reload_actions = BIT(DEVLINK_RELOAD_ACTION_DRIVER_REINIT) |
>+ BIT(DEVLINK_RELOAD_ACTION_FW_ACTIVATE),
> .supported_reload_action_limit_levels = BIT(DEVLINK_RELOAD_ACTION_LIMIT_LEVEL_NONE),
> .reload_down = mlx5_devlink_reload_down,
> .reload_up = mlx5_devlink_reload_up,
>diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c b/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c
>index 61237f4836cc..550f67b00473 100644
>--- a/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c
>+++ b/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c
>@@ -5,6 +5,7 @@
>
> enum {
> MLX5_FW_RESET_FLAGS_RESET_REQUESTED,
>+ MLX5_FW_RESET_FLAGS_PENDING_COMP
> };
>
> struct mlx5_fw_reset {
>@@ -17,6 +18,8 @@ struct mlx5_fw_reset {
> struct work_struct reset_abort_work;
> unsigned long reset_flags;
> struct timer_list timer;
>+ struct completion done;
>+ int ret;
> };
>
> static int mlx5_reg_mfrl_set(struct mlx5_core_dev *dev, u8 reset_level,
>@@ -53,7 +56,14 @@ int mlx5_reg_mfrl_query(struct mlx5_core_dev *dev, u8 *reset_level, u8 *reset_ty
>
> int mlx5_fw_set_reset_sync(struct mlx5_core_dev *dev, u8 reset_type_sel)
> {
>- return mlx5_reg_mfrl_set(dev, MLX5_MFRL_REG_RESET_LEVEL3, reset_type_sel, 0, true);
>+ struct mlx5_fw_reset *fw_reset = dev->priv.fw_reset;
>+ int err;
>+
>+ set_bit(MLX5_FW_RESET_FLAGS_PENDING_COMP, &fw_reset->reset_flags);
>+ err = mlx5_reg_mfrl_set(dev, MLX5_MFRL_REG_RESET_LEVEL3, reset_type_sel, 0, true);
>+ if (err)
>+ clear_bit(MLX5_FW_RESET_FLAGS_PENDING_COMP, &fw_reset->reset_flags);
>+ return err;
> }
>
> int mlx5_fw_set_live_patch(struct mlx5_core_dev *dev)
>@@ -66,19 +76,36 @@ static int mlx5_fw_set_reset_sync_ack(struct mlx5_core_dev *dev)
> return mlx5_reg_mfrl_set(dev, MLX5_MFRL_REG_RESET_LEVEL3, 0, 1, false);
> }
>
>+static void mlx5_fw_reset_complete_reload(struct mlx5_core_dev *dev)
>+{
>+ struct mlx5_fw_reset *fw_reset = dev->priv.fw_reset;
>+
>+ /* if this is the driver that initiated the fw reset, devlink completed the reload */
>+ if (test_bit(MLX5_FW_RESET_FLAGS_PENDING_COMP, &fw_reset->reset_flags)) {
>+ complete(&fw_reset->done);
>+ } else {
>+ mlx5_load_one(dev, false);
>+ devlink_reload_implicit_actions_performed(priv_to_devlink(dev),
>+ DEVLINK_RELOAD_ACTION_LIMIT_LEVEL_NONE,
>+ BIT(DEVLINK_RELOAD_ACTION_DRIVER_REINIT) |
>+ BIT(DEVLINK_RELOAD_ACTION_FW_ACTIVATE));
>+ }
>+}
>+
> static void mlx5_sync_reset_reload_work(struct work_struct *work)
> {
> struct mlx5_fw_reset *fw_reset = container_of(work, struct mlx5_fw_reset,
> reset_reload_work);
> struct mlx5_core_dev *dev = fw_reset->dev;
>+ int err;
>
> mlx5_enter_error_state(dev, true);
> mlx5_unload_one(dev, false);
>- if (mlx5_health_wait_pci_up(dev)) {
>+ err = mlx5_health_wait_pci_up(dev);
>+ if (err)
> mlx5_core_err(dev, "reset reload flow aborted, PCI reads still not working\n");
>- return;
>- }
>- mlx5_load_one(dev, false);
>+ fw_reset->ret = err;
>+ mlx5_fw_reset_complete_reload(dev);
> }
>
> static void mlx5_stop_sync_reset_poll(struct mlx5_core_dev *dev)
>@@ -264,7 +291,8 @@ static void mlx5_sync_reset_now_event(struct work_struct *work)
> done:
> if (err)
> mlx5_start_health_poll(dev);
>- mlx5_load_one(dev, false);
>+ fw_reset->ret = err;
>+ mlx5_fw_reset_complete_reload(dev);
> }
>
> static void mlx5_sync_reset_abort_event(struct work_struct *work)
>@@ -313,6 +341,25 @@ static int fw_reset_event_notifier(struct notifier_block *nb, unsigned long acti
> return NOTIFY_OK;
> }
>
>+#define MLX5_FW_RESET_TIMEOUT_MSEC 5000
>+int mlx5_fw_wait_fw_reset_done(struct mlx5_core_dev *dev)
>+{
>+ unsigned long timeout = msecs_to_jiffies(MLX5_FW_RESET_TIMEOUT_MSEC);
>+ struct mlx5_fw_reset *fw_reset = dev->priv.fw_reset;
>+ int err;
>+
>+ if (!wait_for_completion_timeout(&fw_reset->done, timeout)) {
>+ mlx5_core_warn(dev, "FW sync reset timeout after %d seconds\n",
>+ MLX5_FW_RESET_TIMEOUT_MSEC / 1000);
>+ err = -ETIMEDOUT;
>+ goto out;
>+ }
>+ err = fw_reset->ret;
>+out:
>+ clear_bit(MLX5_FW_RESET_FLAGS_PENDING_COMP, &fw_reset->reset_flags);
>+ return err;
>+}
>+
> int mlx5_fw_reset_events_init(struct mlx5_core_dev *dev)
> {
> struct mlx5_fw_reset *fw_reset = kzalloc(sizeof(*fw_reset), GFP_KERNEL);
>@@ -336,6 +383,7 @@ int mlx5_fw_reset_events_init(struct mlx5_core_dev *dev)
> MLX5_NB_INIT(&fw_reset->nb, fw_reset_event_notifier, GENERAL_EVENT);
> mlx5_eq_notifier_register(dev, &fw_reset->nb);
>
>+ init_completion(&fw_reset->done);
> return 0;
> }
>
>diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.h b/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.h
>index 278f538ea92a..d7ee951a2258 100644
>--- a/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.h
>+++ b/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.h
>@@ -10,6 +10,7 @@ int mlx5_reg_mfrl_query(struct mlx5_core_dev *dev, u8 *reset_level, u8 *reset_ty
> int mlx5_fw_set_reset_sync(struct mlx5_core_dev *dev, u8 reset_type_sel);
> int mlx5_fw_set_live_patch(struct mlx5_core_dev *dev);
>
>+int mlx5_fw_wait_fw_reset_done(struct mlx5_core_dev *dev);
> int mlx5_fw_reset_events_init(struct mlx5_core_dev *dev);
> void mlx5_fw_reset_events_cleanup(struct mlx5_core_dev *dev);
>
>--
>2.17.1
>
Mon, Sep 14, 2020 at 08:07:57AM CEST, [email protected] wrote:
[..]
>+static void mlx5_fw_reset_complete_reload(struct mlx5_core_dev *dev)
>+{
>+ struct mlx5_fw_reset *fw_reset = dev->priv.fw_reset;
>+
>+ /* if this is the driver that initiated the fw reset, devlink completed the reload */
>+ if (test_bit(MLX5_FW_RESET_FLAGS_PENDING_COMP, &fw_reset->reset_flags)) {
>+ complete(&fw_reset->done);
>+ } else {
>+ mlx5_load_one(dev, false);
>+ devlink_reload_implicit_actions_performed(priv_to_devlink(dev),
>+ DEVLINK_RELOAD_ACTION_LIMIT_LEVEL_NONE,
>+ BIT(DEVLINK_RELOAD_ACTION_DRIVER_REINIT) |
>+ BIT(DEVLINK_RELOAD_ACTION_FW_ACTIVATE));
Hmm, who originated the reset? Devlink_reload of the same devlink
instance?
[..]
On 9/14/2020 4:52 PM, Jiri Pirko wrote:
> Mon, Sep 14, 2020 at 08:07:57AM CEST, [email protected] wrote:
>> Add support for devlink reload action fw_activate. To activate firmware
>> image the mlx5 driver resets the firmware and reloads it from flash. If
>> a new image was stored on flash it will be loaded. Once this reload
>> command is executed the driver initiates fw sync reset flow, where the
>> firmware synchronizes all PFs on coming reset and driver reload.
>>
>> Signed-off-by: Moshe Shemesh <[email protected]>
>> ---
>> v3 -> v4:
>> - Renamed actions_done to actions_performed
>> v2 -> v3:
>> - Return the reload actions done
>> - Update reload action counters if reset initiated by remote host
>> v1 -> v2:
>> - Have fw_activate action instead of fw_reset level
>> ---
>> .../net/ethernet/mellanox/mlx5/core/devlink.c | 62 ++++++++++++++++---
>> .../ethernet/mellanox/mlx5/core/fw_reset.c | 60 ++++++++++++++++--
>> .../ethernet/mellanox/mlx5/core/fw_reset.h | 1 +
>> 3 files changed, 109 insertions(+), 14 deletions(-)
>>
>> diff --git a/drivers/net/ethernet/mellanox/mlx5/core/devlink.c b/drivers/net/ethernet/mellanox/mlx5/core/devlink.c
>> index f6b29deaf02e..fa8f6abbea4e 100644
>> --- a/drivers/net/ethernet/mellanox/mlx5/core/devlink.c
>> +++ b/drivers/net/ethernet/mellanox/mlx5/core/devlink.c
>> @@ -4,6 +4,7 @@
>> #include <devlink.h>
>>
>> #include "mlx5_core.h"
>> +#include "fw_reset.h"
>> #include "fs_core.h"
>> #include "eswitch.h"
>>
>> @@ -88,6 +89,32 @@ mlx5_devlink_info_get(struct devlink *devlink, struct devlink_info_req *req,
>> return 0;
>> }
>>
>> +static int mlx5_devlink_reload_fw_activate(struct devlink *devlink, struct netlink_ext_ack *extack)
>> +{
>> + struct mlx5_core_dev *dev = devlink_priv(devlink);
>> + u8 reset_level, reset_type, net_port_alive;
>> + int err;
>> +
>> + err = mlx5_reg_mfrl_query(dev, &reset_level, &reset_type);
>> + if (err)
>> + return err;
>> + if (!(reset_level & MLX5_MFRL_REG_RESET_LEVEL3)) {
>> + NL_SET_ERR_MSG_MOD(extack, "FW activate requires reboot");
>> + return -EINVAL;
>> + }
>> +
>> + net_port_alive = !!(reset_type & MLX5_MFRL_REG_RESET_TYPE_NET_PORT_ALIVE);
>> + err = mlx5_fw_set_reset_sync(dev, net_port_alive);
>> + if (err)
>> + goto out;
>> +
>> + err = mlx5_fw_wait_fw_reset_done(dev);
>> +out:
>> + if (err)
>> + NL_SET_ERR_MSG_MOD(extack, "FW activate command failed");
>> + return err;
>> +}
>> +
>> static int mlx5_devlink_reload_down(struct devlink *devlink, bool netns_change,
>> enum devlink_reload_action action,
>> enum devlink_reload_action_limit_level limit_level,
>> @@ -95,8 +122,17 @@ static int mlx5_devlink_reload_down(struct devlink *devlink, bool netns_change,
>> {
>> struct mlx5_core_dev *dev = devlink_priv(devlink);
>>
>> - mlx5_unload_one(dev, false);
>> - return 0;
>> + switch (action) {
>> + case DEVLINK_RELOAD_ACTION_DRIVER_REINIT:
>> + mlx5_unload_one(dev, false);
>> + return 0;
>> + case DEVLINK_RELOAD_ACTION_FW_ACTIVATE:
>> + return mlx5_devlink_reload_fw_activate(devlink, extack);
>> + default:
>> + /* Unsupported action should not get to this function */
>> + WARN_ON(1);
>> + return -EOPNOTSUPP;
>> + }
>> }
>>
>> static int mlx5_devlink_reload_up(struct devlink *devlink, enum devlink_reload_action action,
>> @@ -104,13 +140,22 @@ static int mlx5_devlink_reload_up(struct devlink *devlink, enum devlink_reload_a
>> struct netlink_ext_ack *extack, unsigned long *actions_performed)
>> {
>> struct mlx5_core_dev *dev = devlink_priv(devlink);
>> - int err;
>>
>> - err = mlx5_load_one(dev, false);
>> - if (err)
>> - return err;
>> if (actions_performed)
>> - *actions_performed = BIT(DEVLINK_RELOAD_ACTION_DRIVER_REINIT);
>> + *actions_performed = BIT(action);
>> +
>> + switch (action) {
>> + case DEVLINK_RELOAD_ACTION_DRIVER_REINIT:
>> + case DEVLINK_RELOAD_ACTION_FW_ACTIVATE:
>> + /* On fw_activate action, also driver is reloaded and reinit performed */
>> + if (actions_performed)
>> + *actions_performed |= BIT(DEVLINK_RELOAD_ACTION_DRIVER_REINIT);
> You should set DEVLINK_RELOAD_ACTION_FW_ACTIVATE bit in actions_performed
> upon activation.
>
I have set it before the switch. As this is reload_up() in mlx5 only
driver_up(), only driver up left to complete these actions. Also
devlink_reload() will ignore the returned value of actions_performed if
devlink_reload_up() failed.
>> + return mlx5_load_one(dev, false);
>> + default:
>> + /* Unsupported action should not get to this function */
>> + WARN_ON(1);
>> + return -EOPNOTSUPP;
>> + }
>>
>> return 0;
>> }
>> @@ -128,7 +173,8 @@ static const struct devlink_ops mlx5_devlink_ops = {
>> #endif
>> .flash_update = mlx5_devlink_flash_update,
>> .info_get = mlx5_devlink_info_get,
>> - .supported_reload_actions = BIT(DEVLINK_RELOAD_ACTION_DRIVER_REINIT),
>> + .supported_reload_actions = BIT(DEVLINK_RELOAD_ACTION_DRIVER_REINIT) |
>> + BIT(DEVLINK_RELOAD_ACTION_FW_ACTIVATE),
>> .supported_reload_action_limit_levels = BIT(DEVLINK_RELOAD_ACTION_LIMIT_LEVEL_NONE),
>> .reload_down = mlx5_devlink_reload_down,
>> .reload_up = mlx5_devlink_reload_up,
>> diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c b/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c
>> index 61237f4836cc..550f67b00473 100644
>> --- a/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c
>> +++ b/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.c
>> @@ -5,6 +5,7 @@
>>
>> enum {
>> MLX5_FW_RESET_FLAGS_RESET_REQUESTED,
>> + MLX5_FW_RESET_FLAGS_PENDING_COMP
>> };
>>
>> struct mlx5_fw_reset {
>> @@ -17,6 +18,8 @@ struct mlx5_fw_reset {
>> struct work_struct reset_abort_work;
>> unsigned long reset_flags;
>> struct timer_list timer;
>> + struct completion done;
>> + int ret;
>> };
>>
>> static int mlx5_reg_mfrl_set(struct mlx5_core_dev *dev, u8 reset_level,
>> @@ -53,7 +56,14 @@ int mlx5_reg_mfrl_query(struct mlx5_core_dev *dev, u8 *reset_level, u8 *reset_ty
>>
>> int mlx5_fw_set_reset_sync(struct mlx5_core_dev *dev, u8 reset_type_sel)
>> {
>> - return mlx5_reg_mfrl_set(dev, MLX5_MFRL_REG_RESET_LEVEL3, reset_type_sel, 0, true);
>> + struct mlx5_fw_reset *fw_reset = dev->priv.fw_reset;
>> + int err;
>> +
>> + set_bit(MLX5_FW_RESET_FLAGS_PENDING_COMP, &fw_reset->reset_flags);
>> + err = mlx5_reg_mfrl_set(dev, MLX5_MFRL_REG_RESET_LEVEL3, reset_type_sel, 0, true);
>> + if (err)
>> + clear_bit(MLX5_FW_RESET_FLAGS_PENDING_COMP, &fw_reset->reset_flags);
>> + return err;
>> }
>>
>> int mlx5_fw_set_live_patch(struct mlx5_core_dev *dev)
>> @@ -66,19 +76,36 @@ static int mlx5_fw_set_reset_sync_ack(struct mlx5_core_dev *dev)
>> return mlx5_reg_mfrl_set(dev, MLX5_MFRL_REG_RESET_LEVEL3, 0, 1, false);
>> }
>>
>> +static void mlx5_fw_reset_complete_reload(struct mlx5_core_dev *dev)
>> +{
>> + struct mlx5_fw_reset *fw_reset = dev->priv.fw_reset;
>> +
>> + /* if this is the driver that initiated the fw reset, devlink completed the reload */
>> + if (test_bit(MLX5_FW_RESET_FLAGS_PENDING_COMP, &fw_reset->reset_flags)) {
>> + complete(&fw_reset->done);
>> + } else {
>> + mlx5_load_one(dev, false);
>> + devlink_reload_implicit_actions_performed(priv_to_devlink(dev),
>> + DEVLINK_RELOAD_ACTION_LIMIT_LEVEL_NONE,
>> + BIT(DEVLINK_RELOAD_ACTION_DRIVER_REINIT) |
>> + BIT(DEVLINK_RELOAD_ACTION_FW_ACTIVATE));
>> + }
>> +}
>> +
>> static void mlx5_sync_reset_reload_work(struct work_struct *work)
>> {
>> struct mlx5_fw_reset *fw_reset = container_of(work, struct mlx5_fw_reset,
>> reset_reload_work);
>> struct mlx5_core_dev *dev = fw_reset->dev;
>> + int err;
>>
>> mlx5_enter_error_state(dev, true);
>> mlx5_unload_one(dev, false);
>> - if (mlx5_health_wait_pci_up(dev)) {
>> + err = mlx5_health_wait_pci_up(dev);
>> + if (err)
>> mlx5_core_err(dev, "reset reload flow aborted, PCI reads still not working\n");
>> - return;
>> - }
>> - mlx5_load_one(dev, false);
>> + fw_reset->ret = err;
>> + mlx5_fw_reset_complete_reload(dev);
>> }
>>
>> static void mlx5_stop_sync_reset_poll(struct mlx5_core_dev *dev)
>> @@ -264,7 +291,8 @@ static void mlx5_sync_reset_now_event(struct work_struct *work)
>> done:
>> if (err)
>> mlx5_start_health_poll(dev);
>> - mlx5_load_one(dev, false);
>> + fw_reset->ret = err;
>> + mlx5_fw_reset_complete_reload(dev);
>> }
>>
>> static void mlx5_sync_reset_abort_event(struct work_struct *work)
>> @@ -313,6 +341,25 @@ static int fw_reset_event_notifier(struct notifier_block *nb, unsigned long acti
>> return NOTIFY_OK;
>> }
>>
>> +#define MLX5_FW_RESET_TIMEOUT_MSEC 5000
>> +int mlx5_fw_wait_fw_reset_done(struct mlx5_core_dev *dev)
>> +{
>> + unsigned long timeout = msecs_to_jiffies(MLX5_FW_RESET_TIMEOUT_MSEC);
>> + struct mlx5_fw_reset *fw_reset = dev->priv.fw_reset;
>> + int err;
>> +
>> + if (!wait_for_completion_timeout(&fw_reset->done, timeout)) {
>> + mlx5_core_warn(dev, "FW sync reset timeout after %d seconds\n",
>> + MLX5_FW_RESET_TIMEOUT_MSEC / 1000);
>> + err = -ETIMEDOUT;
>> + goto out;
>> + }
>> + err = fw_reset->ret;
>> +out:
>> + clear_bit(MLX5_FW_RESET_FLAGS_PENDING_COMP, &fw_reset->reset_flags);
>> + return err;
>> +}
>> +
>> int mlx5_fw_reset_events_init(struct mlx5_core_dev *dev)
>> {
>> struct mlx5_fw_reset *fw_reset = kzalloc(sizeof(*fw_reset), GFP_KERNEL);
>> @@ -336,6 +383,7 @@ int mlx5_fw_reset_events_init(struct mlx5_core_dev *dev)
>> MLX5_NB_INIT(&fw_reset->nb, fw_reset_event_notifier, GENERAL_EVENT);
>> mlx5_eq_notifier_register(dev, &fw_reset->nb);
>>
>> + init_completion(&fw_reset->done);
>> return 0;
>> }
>>
>> diff --git a/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.h b/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.h
>> index 278f538ea92a..d7ee951a2258 100644
>> --- a/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.h
>> +++ b/drivers/net/ethernet/mellanox/mlx5/core/fw_reset.h
>> @@ -10,6 +10,7 @@ int mlx5_reg_mfrl_query(struct mlx5_core_dev *dev, u8 *reset_level, u8 *reset_ty
>> int mlx5_fw_set_reset_sync(struct mlx5_core_dev *dev, u8 reset_type_sel);
>> int mlx5_fw_set_live_patch(struct mlx5_core_dev *dev);
>>
>> +int mlx5_fw_wait_fw_reset_done(struct mlx5_core_dev *dev);
>> int mlx5_fw_reset_events_init(struct mlx5_core_dev *dev);
>> void mlx5_fw_reset_events_cleanup(struct mlx5_core_dev *dev);
>>
>> --
>> 2.17.1
>>
Tue, Sep 15, 2020 at 02:44:02PM CEST, [email protected] wrote:
>
>On 9/14/2020 4:54 PM, Jiri Pirko wrote:
>> Mon, Sep 14, 2020 at 08:07:57AM CEST, [email protected] wrote:
>>
>> [..]
>>
>> > +static void mlx5_fw_reset_complete_reload(struct mlx5_core_dev *dev)
>> > +{
>> > + struct mlx5_fw_reset *fw_reset = dev->priv.fw_reset;
>> > +
>> > + /* if this is the driver that initiated the fw reset, devlink completed the reload */
>> > + if (test_bit(MLX5_FW_RESET_FLAGS_PENDING_COMP, &fw_reset->reset_flags)) {
>> > + complete(&fw_reset->done);
>> > + } else {
>> > + mlx5_load_one(dev, false);
>> > + devlink_reload_implicit_actions_performed(priv_to_devlink(dev),
>> > + DEVLINK_RELOAD_ACTION_LIMIT_LEVEL_NONE,
>> > + BIT(DEVLINK_RELOAD_ACTION_DRIVER_REINIT) |
>> > + BIT(DEVLINK_RELOAD_ACTION_FW_ACTIVATE));
>> Hmm, who originated the reset? Devlink_reload of the same devlink
>> instance?
>
>
>Not the same devlink instance for sure. I defer it by the flag above
>MLX5_FW_RESET_FLAG_PENDING_COMP. If the flag set, I set complete to the
>reload_down() waiting for it.
Hmm, thinking about the stats, as
devlink_reload_implicit_actions_performed() is called only in case
another instance does the reload, shouldn't it be a separate set of
stats? I think that the user would like to distinguish local and remote
reload, don't you think?
>
>
>> [..]
On 9/15/2020 4:37 PM, Jiri Pirko wrote:
> Tue, Sep 15, 2020 at 02:44:02PM CEST, [email protected] wrote:
>> On 9/14/2020 4:54 PM, Jiri Pirko wrote:
>>> Mon, Sep 14, 2020 at 08:07:57AM CEST, [email protected] wrote:
>>>
>>> [..]
>>>
>>>> +static void mlx5_fw_reset_complete_reload(struct mlx5_core_dev *dev)
>>>> +{
>>>> + struct mlx5_fw_reset *fw_reset = dev->priv.fw_reset;
>>>> +
>>>> + /* if this is the driver that initiated the fw reset, devlink completed the reload */
>>>> + if (test_bit(MLX5_FW_RESET_FLAGS_PENDING_COMP, &fw_reset->reset_flags)) {
>>>> + complete(&fw_reset->done);
>>>> + } else {
>>>> + mlx5_load_one(dev, false);
>>>> + devlink_reload_implicit_actions_performed(priv_to_devlink(dev),
>>>> + DEVLINK_RELOAD_ACTION_LIMIT_LEVEL_NONE,
>>>> + BIT(DEVLINK_RELOAD_ACTION_DRIVER_REINIT) |
>>>> + BIT(DEVLINK_RELOAD_ACTION_FW_ACTIVATE));
>>> Hmm, who originated the reset? Devlink_reload of the same devlink
>>> instance?
>>
>> Not the same devlink instance for sure. I defer it by the flag above
>> MLX5_FW_RESET_FLAG_PENDING_COMP. If the flag set, I set complete to the
>> reload_down() waiting for it.
> Hmm, thinking about the stats, as
> devlink_reload_implicit_actions_performed() is called only in case
> another instance does the reload, shouldn't it be a separate set of
> stats? I think that the user would like to distinguish local and remote
> reload, don't you think?
>
Possible, it will double the counters, but it will give more info.
So actually, if devlink_reload is not supported by driver, I should hold
and show only the remote stats or all stats always ?
How such remote counter should look like ? something like
remote_fw_activate while the local is just fw_activate ?
>>
>>> [..]
On 9/14/2020 4:54 PM, Jiri Pirko wrote:
> Mon, Sep 14, 2020 at 08:07:57AM CEST, [email protected] wrote:
>
> [..]
>
>> +static void mlx5_fw_reset_complete_reload(struct mlx5_core_dev *dev)
>> +{
>> + struct mlx5_fw_reset *fw_reset = dev->priv.fw_reset;
>> +
>> + /* if this is the driver that initiated the fw reset, devlink completed the reload */
>> + if (test_bit(MLX5_FW_RESET_FLAGS_PENDING_COMP, &fw_reset->reset_flags)) {
>> + complete(&fw_reset->done);
>> + } else {
>> + mlx5_load_one(dev, false);
>> + devlink_reload_implicit_actions_performed(priv_to_devlink(dev),
>> + DEVLINK_RELOAD_ACTION_LIMIT_LEVEL_NONE,
>> + BIT(DEVLINK_RELOAD_ACTION_DRIVER_REINIT) |
>> + BIT(DEVLINK_RELOAD_ACTION_FW_ACTIVATE));
> Hmm, who originated the reset? Devlink_reload of the same devlink
> instance?
Not the same devlink instance for sure. I defer it by the flag above
MLX5_FW_RESET_FLAG_PENDING_COMP. If the flag set, I set complete to the
reload_down() waiting for it.
> [..]
Tue, Sep 15, 2020 at 10:28:44PM CEST, [email protected] wrote:
>
>On 9/15/2020 4:37 PM, Jiri Pirko wrote:
>> Tue, Sep 15, 2020 at 02:44:02PM CEST, [email protected] wrote:
>> > On 9/14/2020 4:54 PM, Jiri Pirko wrote:
>> > > Mon, Sep 14, 2020 at 08:07:57AM CEST, [email protected] wrote:
>> > >
>> > > [..]
>> > >
>> > > > +static void mlx5_fw_reset_complete_reload(struct mlx5_core_dev *dev)
>> > > > +{
>> > > > + struct mlx5_fw_reset *fw_reset = dev->priv.fw_reset;
>> > > > +
>> > > > + /* if this is the driver that initiated the fw reset, devlink completed the reload */
>> > > > + if (test_bit(MLX5_FW_RESET_FLAGS_PENDING_COMP, &fw_reset->reset_flags)) {
>> > > > + complete(&fw_reset->done);
>> > > > + } else {
>> > > > + mlx5_load_one(dev, false);
>> > > > + devlink_reload_implicit_actions_performed(priv_to_devlink(dev),
>> > > > + DEVLINK_RELOAD_ACTION_LIMIT_LEVEL_NONE,
>> > > > + BIT(DEVLINK_RELOAD_ACTION_DRIVER_REINIT) |
>> > > > + BIT(DEVLINK_RELOAD_ACTION_FW_ACTIVATE));
>> > > Hmm, who originated the reset? Devlink_reload of the same devlink
>> > > instance?
>> >
>> > Not the same devlink instance for sure. I defer it by the flag above
>> > MLX5_FW_RESET_FLAG_PENDING_COMP. If the flag set, I set complete to the
>> > reload_down() waiting for it.
>> Hmm, thinking about the stats, as
>> devlink_reload_implicit_actions_performed() is called only in case
>> another instance does the reload, shouldn't it be a separate set of
>> stats? I think that the user would like to distinguish local and remote
>> reload, don't you think?
>>
>
>Possible, it will double the counters, but it will give more info.
>
>So actually, if devlink_reload is not supported by driver, I should hold and
>show only the remote stats or all stats always ?
It would make sense to show just remote stats.
>
>How such remote counter should look like ? something like remote_fw_activate?
>while the local is just fw_activate ?
Sounds good.
>
>> >
>> > > [..]