Hello
As per patch https://lore.kernel.org/patchwork/patch/1300241/ the link
modes for 100base FX full and half duplex modes did not exist. Adding these
link modes to the core and ethtool allow devices like the DP83822, DP83869 and
Broadcomm PHYs to properly advertise the correct mode for Fiber 100Mbps.
Corresponding user land ethtool patches are available but rely on these patches
to be applied first.
Dan
Dan Murphy (3):
ethtool: Add 100base-FX link mode entries
net: dp83869: Add ability to advertise Fiber connection
net: phy: dp83822: Update the fiber advertisement for speed
drivers/net/phy/dp83822.c | 13 +++++--
drivers/net/phy/dp83869.c | 73 ++++++++++++++++++++++++++++++++++++
drivers/net/phy/phy-core.c | 4 +-
include/uapi/linux/ethtool.h | 2 +
net/ethtool/common.c | 2 +
net/ethtool/linkmodes.c | 2 +
6 files changed, 92 insertions(+), 4 deletions(-)
--
2.28.0
From: Dan Murphy <[email protected]>
Date: Fri, 18 Sep 2020 14:14:50 -0500
> As per patch https://lore.kernel.org/patchwork/patch/1300241/ the link
> modes for 100base FX full and half duplex modes did not exist. Adding these
> link modes to the core and ethtool allow devices like the DP83822, DP83869 and
> Broadcomm PHYs to properly advertise the correct mode for Fiber 100Mbps.
>
> Corresponding user land ethtool patches are available but rely on these patches
> to be applied first.
Series applied, thank you.