This series are based on 5.9-rc1 and we provide two i2c patches
to fix some definitions for bus frequency.
Qii Wang (2):
i2c: mediatek: Fix generic definitions for bus frequency
i2c: mediatek: Send i2c master code at more than 1MHz
drivers/i2c/busses/i2c-mt65xx.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
--
1.9.1
The max frequency of mediatek i2c controller driver is
I2C_MAX_HIGH_SPEED_MODE_FREQ, not I2C_MAX_FAST_MODE_PLUS_FREQ.
Fix it.
Fixes: 90224e6468e1 ("i2c: drivers: Use generic definitions
for bus frequencies")
Reviewed-by: Yingjoe Chen <[email protected]>
Signed-off-by: Qii Wang <[email protected]>
---
drivers/i2c/busses/i2c-mt65xx.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index efc1404..a1978eb 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -681,8 +681,8 @@ static int mtk_i2c_calculate_speed(struct mtk_i2c *i2c, unsigned int clk_src,
unsigned int cnt_mul;
int ret = -EINVAL;
- if (target_speed > I2C_MAX_FAST_MODE_PLUS_FREQ)
- target_speed = I2C_MAX_FAST_MODE_PLUS_FREQ;
+ if (target_speed > I2C_MAX_HIGH_SPEED_MODE_FREQ)
+ target_speed = I2C_MAX_HIGH_SPEED_MODE_FREQ;
max_step_cnt = mtk_i2c_max_step_cnt(target_speed);
base_step_cnt = max_step_cnt;
--
1.9.1
The master code needs to being sent when the speed is more than
I2C_MAX_FAST_MODE_PLUS_FREQ, not I2C_MAX_FAST_MODE_FREQ in the
latest I2C-bus specification and user manual.
Signed-off-by: Qii Wang <[email protected]>
---
drivers/i2c/busses/i2c-mt65xx.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/i2c/busses/i2c-mt65xx.c b/drivers/i2c/busses/i2c-mt65xx.c
index a1978eb..0cbdfbe 100644
--- a/drivers/i2c/busses/i2c-mt65xx.c
+++ b/drivers/i2c/busses/i2c-mt65xx.c
@@ -759,7 +759,7 @@ static int mtk_i2c_set_speed(struct mtk_i2c *i2c, unsigned int parent_clk)
for (clk_div = 1; clk_div <= max_clk_div; clk_div++) {
clk_src = parent_clk / clk_div;
- if (target_speed > I2C_MAX_FAST_MODE_FREQ) {
+ if (target_speed > I2C_MAX_FAST_MODE_PLUS_FREQ) {
/* Set master code speed register */
ret = mtk_i2c_calculate_speed(i2c, clk_src,
I2C_MAX_FAST_MODE_FREQ,
--
1.9.1
On Thu, Sep 17, 2020 at 07:55:41PM +0800, Qii Wang wrote:
> The max frequency of mediatek i2c controller driver is
> I2C_MAX_HIGH_SPEED_MODE_FREQ, not I2C_MAX_FAST_MODE_PLUS_FREQ.
> Fix it.
>
> Fixes: 90224e6468e1 ("i2c: drivers: Use generic definitions
> for bus frequencies")
> Reviewed-by: Yingjoe Chen <[email protected]>
> Signed-off-by: Qii Wang <[email protected]>
Applied to for-current, thanks!
On Thu, Sep 17, 2020 at 07:55:42PM +0800, Qii Wang wrote:
> The master code needs to being sent when the speed is more than
> I2C_MAX_FAST_MODE_PLUS_FREQ, not I2C_MAX_FAST_MODE_FREQ in the
> latest I2C-bus specification and user manual.
>
> Signed-off-by: Qii Wang <[email protected]>
Applied to for-current, thanks!