2020-09-20 14:17:53

by Colin King

Subject: [PATCH] drm/gma500: clean up indentation issues

From: Colin Ian King <[email protected]>

There are a couple of statements that are indented too deeply,
remove the extraneous tabs and also an empty line.

Signed-off-by: Colin Ian King <[email protected]>
---
drivers/gpu/drm/gma500/cdv_intel_dp.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/gma500/cdv_intel_dp.c b/drivers/gpu/drm/gma500/cdv_intel_dp.c
index 720a767118c9..50016a754172 100644
--- a/drivers/gpu/drm/gma500/cdv_intel_dp.c
+++ b/drivers/gpu/drm/gma500/cdv_intel_dp.c
@@ -1501,8 +1501,7 @@ cdv_intel_dp_start_link_train(struct gma_encoder *encoder)
clock_recovery = false;

DRM_DEBUG_KMS("Start train\n");
- reg = DP | DP_LINK_TRAIN_PAT_1;
-
+ reg = DP | DP_LINK_TRAIN_PAT_1;

for (;;) {
/* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */
@@ -1575,7 +1574,7 @@ cdv_intel_dp_complete_link_train(struct gma_encoder *encoder)
cr_tries = 0;

DRM_DEBUG_KMS("\n");
- reg = DP | DP_LINK_TRAIN_PAT_2;
+ reg = DP | DP_LINK_TRAIN_PAT_2;

for (;;) {

--
2.27.0

2020-09-22 13:23:17

by Daniel Vetter

Subject: Re: [PATCH] drm/gma500: clean up indentation issues

On Sun, Sep 20, 2020 at 03:14:07PM +0100, Colin King wrote:
> From: Colin Ian King <[email protected]>
>
> There are a couple of statements that are indented too deeply,
> remove the extraneous tabs and also an empty line.
>
> Signed-off-by: Colin Ian King <[email protected]>

Pushed to drm-misc-next, thanks for your patch.
-Daniel

> ---
> drivers/gpu/drm/gma500/cdv_intel_dp.c | 5 ++---
> 1 file changed, 2 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/gma500/cdv_intel_dp.c b/drivers/gpu/drm/gma500/cdv_intel_dp.c
> index 720a767118c9..50016a754172 100644
> --- a/drivers/gpu/drm/gma500/cdv_intel_dp.c
> +++ b/drivers/gpu/drm/gma500/cdv_intel_dp.c
> @@ -1501,8 +1501,7 @@ cdv_intel_dp_start_link_train(struct gma_encoder *encoder)
> clock_recovery = false;
>
> DRM_DEBUG_KMS("Start train\n");
> - reg = DP | DP_LINK_TRAIN_PAT_1;
> -
> + reg = DP | DP_LINK_TRAIN_PAT_1;
>
> for (;;) {
> /* Use intel_dp->train_set[0] to set the voltage and pre emphasis values */
> @@ -1575,7 +1574,7 @@ cdv_intel_dp_complete_link_train(struct gma_encoder *encoder)
> cr_tries = 0;
>
> DRM_DEBUG_KMS("\n");
> - reg = DP | DP_LINK_TRAIN_PAT_2;
> + reg = DP | DP_LINK_TRAIN_PAT_2;
>
> for (;;) {
>
> --
> 2.27.0
>

--
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch